eadb1a9437
Itus Networks Shield - 1Ghz dual-core mips64 / Cavium Octeon 3 SoC, 1Gb RAM, 4Gb eMMC,3 GbE 10/100/1000 ports Information regarding device can be found: https://deviwiki.com/wiki/Itus_Networks_Shield_Pro Installing OpenWrt on Itus Networks Shield: 1) Boot Shield 2) On device: mount /dev/mmcblk1p1 /mnt 3) scp openwrt-octeon-itus,shield-router-initramfs-kernel.bin to /mnt/ItusrouterImage 3a) Optionally: scp openwrt-octeon-itus,shield-router-initramfs-kernel.bin to /mnt/ItusgatewayImage to allow you to have an emergency recovery boot in the GATEWAY slot - this slot will have no permament storage and is used for emergency recovery only when booted in the (G)ateway position 4) On device: umount /mnt 5) reboot Once booted, run the sysupgrade via cli or luCi on the openwrt-octeon-itus,shield-router-squashfs-sysupgrade.tar file the mode you are running. Once rebooted, the system installation is complete. Your storage partition for the mode is inialized and set. Signed-off-by: Donald Hoskins <grommish@gmail.com> [cut out sysupgrade-* changes, move a few lines, drop case CVMX_BOARD_TYPE_ITUS_SHIELD] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
21 lines
442 B
Text
21 lines
442 B
Text
# Copyright (C) 2014 OpenWrt.org
|
|
|
|
move_config() {
|
|
. /lib/functions.sh
|
|
. /lib/upgrade/common.sh
|
|
|
|
case "$(board_name)" in
|
|
erlite)
|
|
mount -t vfat /dev/sda1 /mnt
|
|
[ -f "/mnt/$BACKUP_FILE" ] && mv -f "/mnt/$BACKUP_FILE" /
|
|
umount /mnt
|
|
;;
|
|
itus,shield-router)
|
|
mount -t vfat /dev/mmcblk1p1 /mnt
|
|
[ -f "/mnt/$BACKUP_FILE" ] && mv -f "/mnt/$BACKUP_FILE" /
|
|
umount /mnt
|
|
;;
|
|
esac
|
|
}
|
|
|
|
boot_hook_add preinit_mount_root move_config
|