11bff24b3e
This patch adds support for D-Link DIR-1960 A1. Given the similarity with
the DIR-1760/2660 A1, this patch also introduces a common DTSI which can
be shared with these devices, with support to be added in future commits.
Specifications:
* Board: AP-MTKH7-0002
* SoC: MediaTek MT7621AT
* RAM: 256 MB (DDR3)
* Flash: 128 MB (NAND)
* WiFi: MediaTek MT7615N (x2)
* Switch: 1 WAN, 4 LAN (Gigabit)
* Ports: 1 USB 3.0
* Buttons: Reset, WPS
* LEDs: Power (white/orange), Internet (white/orange), WiFi 2.4G (white),
WiFi 5G (white), USB 3.0 (white)
Notes:
* WiFi 2.4G and WiFi 5G LEDs are wired directly to the wireless chips
Installation:
* D-Link Recovery GUI: power down the router, press and hold the reset
button, then re-plug it. Keep the reset button pressed until the power
LED starts flashing orange, manually assign a static IP address under
the 192.168.0.xxx subnet (e.g. 192.168.0.2) and go to http://192.168.0.1
* Some modern browsers may have problems flashing via the Recovery GUI,
if that occurs consider uploading the firmware through cURL:
curl -v -i -F "firmware=@file.bin" 192.168.0.1
MAC addresses:
lan factory 0xe000 *:EB (label)
wan factory 0xe006 *:EE
2.4 factory 0xe000 +1 *:EC
5.0 factory 0xe000 +2 *:ED
Seems like vendor didn't replace the dummy entrys in the calibration data.
Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
[fix whitespace issues, create patch to merge DIR-1960 first, move
special WiFi MAC settings to DTS, extend commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
89 lines
2 KiB
Bash
Executable file
89 lines
2 KiB
Bash
Executable file
#
|
|
# Copyright (C) 2010 OpenWrt.org
|
|
#
|
|
|
|
PART_NAME=firmware
|
|
REQUIRE_IMAGE_METADATA=1
|
|
|
|
RAMFS_COPY_BIN='fw_printenv fw_setenv'
|
|
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
|
|
|
platform_check_image() {
|
|
return 0
|
|
}
|
|
|
|
platform_do_upgrade() {
|
|
local board=$(board_name)
|
|
|
|
case "$board" in
|
|
alfa-network,quad-e4g)
|
|
[ "$(fw_printenv -n dual_image 2>/dev/null)" = "1" ] &&\
|
|
[ -n "$(find_mtd_part backup)" ] && {
|
|
PART_NAME=backup
|
|
if [ "$(fw_printenv -n bootactive 2>/dev/null)" = "1" ]; then
|
|
fw_setenv bootactive 2 || exit 1
|
|
else
|
|
fw_setenv bootactive 1 || exit 1
|
|
fi
|
|
}
|
|
;;
|
|
mikrotik,routerboard-750gr3|\
|
|
mikrotik,routerboard-m11g|\
|
|
mikrotik,routerboard-m33g)
|
|
[ -z "$(rootfs_type)" ] && mtd erase firmware
|
|
;;
|
|
asus,rt-ac65p|\
|
|
asus,rt-ac85p)
|
|
echo "Backing up firmware"
|
|
dd if=/dev/mtd4 bs=1024 count=4096 > /tmp/backup_firmware.bin
|
|
dd if=/dev/mtd5 bs=1024 count=52224 >> /tmp/backup_firmware.bin
|
|
mtd -e firmware2 write /tmp/backup_firmware.bin firmware2
|
|
;;
|
|
esac
|
|
|
|
case "$board" in
|
|
asus,rt-ac65p|\
|
|
asus,rt-ac85p|\
|
|
dlink,dir-1960-a1|\
|
|
hiwifi,hc5962|\
|
|
linksys,ea7300-v1|\
|
|
linksys,ea7500-v2|\
|
|
netgear,r6220|\
|
|
netgear,r6260|\
|
|
netgear,r6350|\
|
|
netgear,r6700-v2|\
|
|
netgear,r6800|\
|
|
netgear,r6850|\
|
|
netgear,wac104|\
|
|
netgear,wac124|\
|
|
netis,wf2881|\
|
|
xiaomi,mi-router-ac2100|\
|
|
xiaomi,mir3g|\
|
|
xiaomi,mir3p|\
|
|
xiaomi,redmi-router-ac2100)
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
iodata,wn-ax1167gr2|\
|
|
iodata,wn-ax2033gr|\
|
|
iodata,wn-dx1167r)
|
|
iodata_mstc_upgrade_prepare
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
ubnt,edgerouter-x|\
|
|
ubnt,edgerouter-x-sfp)
|
|
platform_upgrade_ubnt_erx "$1"
|
|
;;
|
|
zyxel,wap6805)
|
|
local kernel2_mtd="$(find_mtd_part Kernel2)"
|
|
[ "$(hexdump -n 4 -e '"%x"' $kernel2_mtd)" = "56190527" ] &&\
|
|
[ "$(hexdump -n 4 -s 104 -e '"%x"' $kernel2_mtd)" != "0" ] &&\
|
|
dd bs=4 count=1 seek=26 conv=notrunc if=/dev/zero of=$kernel2_mtd 2>/dev/null &&\
|
|
echo "Kernel2 sequence number was reset to 0"
|
|
CI_KERNPART="Kernel"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
*)
|
|
default_do_upgrade "$1"
|
|
;;
|
|
esac
|
|
}
|