ba0f4f0cfd
This device uses the same hardware as RE650 v1 which got supported in
8c51dde.
Hardware specification:
- SoC 880 MHz - MediaTek MT7621AT
- 128 MB of DDR3 RAM
- 16 MB - Winbond 25Q128FVSG
- 4T4R 2.4 GHz - MediaTek MT7615E
- 4T4R 5 GHz - MediaTek MT7615E
- 1x 1 Gbps Ethernet - MT7621AT integrated
- 7x LEDs (Power, 2G, 5G, WPS(x2), Lan(x2))
- 4x buttons (Reset, Power, WPS, LED)
- UART header (J1) - 2:GND, 3:RX, 4:TX
Serial console @ 57600,8n1
Flash instructions:
Upload
openwrt-ramips-mt7621-tplink_re500-v1-squashfs-factory.bin
from the RE500 web interface.
TFTP recovery to stock firmware:
Unfortunately, I can't find an easy way to recover the RE
without opening the device and using modified binaries. The
TFTP upload will only work if selected from u-boot, which
means you have to open the device and attach to the serial
console. The TFTP update procedure does *not* accept the
published vendor firmware binaries. However, it allows to
flash kernel + rootfs binaries, and this works if you have
a backup of the original contents of the flash. It's probably
possible to create special image out of the vendor binaries
and use that as recovery image.
Signed-off-by: Christoph Krapp <achterin@googlemail.com>
[remove dts-v1 in DTSI, do not touch WiFi LEDs for RE650, keep
state_default in DTS files, fix label-mac-device, use lower case
for WiFi LEDs]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
95 lines
3.4 KiB
Bash
Executable file
95 lines
3.4 KiB
Bash
Executable file
#!/bin/sh
|
|
|
|
. /lib/functions/leds.sh
|
|
. /lib/functions/uci-defaults.sh
|
|
|
|
set_wifi_led() {
|
|
ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
|
|
}
|
|
|
|
|
|
board=$(board_name)
|
|
boardname="${board##*,}"
|
|
|
|
board_config_update
|
|
|
|
led_wlan="$(get_dt_led wlan)"
|
|
[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt"
|
|
|
|
case $board in
|
|
d-team,newifi-d2)
|
|
ucidef_set_led_netdev "internet" "internet" "$boardname:amber:internet" "wan"
|
|
ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:blue:wlan2g" "wlan0"
|
|
ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:blue:wlan5g" "wlan1"
|
|
;;
|
|
d-team,pbr-m1|\
|
|
gehua,ghl-r-001)
|
|
ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "wan"
|
|
;;
|
|
dlink,dir-860l-b1)
|
|
ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "wan"
|
|
;;
|
|
gnubee,gb-pc1|\
|
|
gnubee,gb-pc2)
|
|
ucidef_set_led_netdev "lan1" "lan1" "$boardname:green:lan1" "lan1"
|
|
ucidef_set_led_netdev "lan2" "lan2" "$boardname:green:lan2" "lan2"
|
|
;;
|
|
linksys,ea7500-v2)
|
|
ucidef_set_led_netdev "lan1" "lan1 link" "$boardname:green:lan1" "lan1" "link"
|
|
ucidef_set_led_netdev "lan2" "lan2 link" "$boardname:green:lan2" "lan2" "link"
|
|
ucidef_set_led_netdev "lan3" "lan3 link" "$boardname:green:lan3" "lan3" "link"
|
|
ucidef_set_led_netdev "lan4" "lan4 link" "$boardname:green:lan4" "lan4" "link"
|
|
ucidef_set_led_netdev "wan" "wan link" "$boardname:green:wan" "wan" "link"
|
|
;;
|
|
mikrotik,routerboard-m11g)
|
|
ucidef_set_rssimon "wlan0" "200000" "1"
|
|
ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100"
|
|
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100"
|
|
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi2" "wlan0" "40" "100"
|
|
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi3" "wlan0" "60" "100"
|
|
ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "$boardname:green:rssi4" "wlan0" "80" "100"
|
|
;;
|
|
mtc,wr1201)
|
|
ucidef_set_led_netdev "eth_link" "LAN link" "$boardname:green:eth_link" "br-lan"
|
|
;;
|
|
netgear,r6220|\
|
|
netgear,r6260|\
|
|
netgear,r6350|\
|
|
netgear,r6850|\
|
|
netgear,wac124|\
|
|
netgear,wndr3700-v5)
|
|
ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" "wan"
|
|
;;
|
|
netgear,r6700-v2|\
|
|
netgear,r6800)
|
|
ucidef_set_led_netdev "wan" "WAN" "$boardname:white:wan" "wan"
|
|
ucidef_set_led_netdev "lan1" "LAN1" "$boardname:white:lan1" "lan1"
|
|
ucidef_set_led_netdev "lan2" "LAN2" "$boardname:white:lan2" "lan2"
|
|
ucidef_set_led_netdev "lan3" "LAN3" "$boardname:white:lan3" "lan3"
|
|
ucidef_set_led_netdev "lan4" "LAN4" "$boardname:white:lan4" "lan4"
|
|
;;
|
|
tplink,re350-v1|\
|
|
tplink,re650-v1)
|
|
ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0"
|
|
ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$boardname:blue:wifi5G" "wlan1"
|
|
ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "lan" "tx rx"
|
|
ucidef_set_led_netdev "eth_link" "LAN link" "$boardname:green:eth_link" "lan" "link"
|
|
;;
|
|
tplink,re500-v1)
|
|
ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "lan" "tx rx"
|
|
ucidef_set_led_netdev "eth_link" "LAN link" "$boardname:green:eth_link" "lan" "link"
|
|
;;
|
|
xzwifi,creativebox-v1)
|
|
ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "wan"
|
|
;;
|
|
xiaomi,redmi-router-ac2100)
|
|
ucidef_set_led_netdev "wan" "wan" "$boardname:white:wan" "wan"
|
|
;;
|
|
youhua,wr1200js)
|
|
ucidef_set_led_netdev "internet" "INTERNET" "$boardname:green:wan" "wan"
|
|
;;
|
|
esac
|
|
|
|
board_config_flush
|
|
|
|
exit 0
|