6d98c098e4
Specifications:
SoC: MediaTek MT7621ST (880 MHz)
FLASH: 16 MiB (Macronix MX25L12835FM2I-10G)
RAM: 128 MiB (Nanya NT5CB64M16FP-DH)
WiFi: MediaTek MT7603EN bgn 2x2:2
WiFi: MediaTek MT7612EN an 2x2:2
BTN: Reset, WPS
LED: - Power
- WiFi 2.4 GHz
- WiFi 5 GHz
- WAN
- LAN {1-4}
- USB {1-2}
UART: UART is present as pin hole next to the aluminium capacitor.
3V3 - RX - GND - TX / 115200-8N1
3V3 is the nearest on the aluminium capacitor and nut hole (pin1).
USB: 2 ports
POWER: 12VDC, 1.5A (Barrel 5.5x2.1)
Installation:
Via TFTP:
Set your computers IP-Address to 192.168.1.75
Power up the Router with the Reset button pressed.
Release the Reset button after 5 seconds.
Upload OpenWRT sysupgrade image via TFTP:
tftp -4 -v -m binary 192.168.1.1 -c put IMAGE
MAC addresses:
0x4 *:98 2g/wan, label
0x22 *:9c
0x28 *:98
0x8004 *:9c 5g/lan
Though addresses are written to 0x22 and 0x28, it appears that the
vendor firmware actually only uses 0x4 and 0x8004. Thus, we do the
same here.
Signed-off-by: Pavel Chervontsev <cherpash@gmail.com>
[add MAC address overview, add label-mac-device, fix IMAGE_SIZE]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
104 lines
3.3 KiB
Bash
Executable file
104 lines
3.3 KiB
Bash
Executable file
#!/bin/sh
|
|
|
|
. /lib/functions/leds.sh
|
|
. /lib/functions/uci-defaults.sh
|
|
|
|
board=$(board_name)
|
|
|
|
board_config_update
|
|
|
|
case $board in
|
|
asus,rt-n56u-b1)
|
|
ucidef_set_led_netdev "lan" "LAN link" "blue:lan" "br-lan"
|
|
ucidef_set_led_netdev "wan" "WAN link" "blue:wan" "wan"
|
|
;;
|
|
d-team,newifi-d2)
|
|
ucidef_set_led_netdev "internet" "internet" "amber:internet" "wan"
|
|
ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "blue:wlan2g" "wlan0"
|
|
ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "blue:wlan5g" "wlan1"
|
|
;;
|
|
d-team,pbr-m1|\
|
|
gehua,ghl-r-001|\
|
|
xzwifi,creativebox-v1)
|
|
ucidef_set_led_netdev "internet" "internet" "blue:internet" "wan"
|
|
;;
|
|
dlink,dir-1960-a1|\
|
|
dlink,dir-2640-a1|\
|
|
dlink,dir-2660-a1)
|
|
ucidef_set_led_netdev "wan" "wan" "white:net" "wan"
|
|
;;
|
|
dlink,dir-860l-b1|\
|
|
dlink,dir-867-a1|\
|
|
dlink,dir-878-a1|\
|
|
dlink,dir-882-a1)
|
|
ucidef_set_led_netdev "wan" "wan" "green:net" "wan"
|
|
;;
|
|
gnubee,gb-pc1|\
|
|
gnubee,gb-pc2)
|
|
ucidef_set_led_netdev "lan1" "lan1" "green:lan1" "lan1"
|
|
ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2"
|
|
;;
|
|
linksys,ea7300-v1|\
|
|
linksys,ea7300-v2|\
|
|
linksys,ea7500-v2)
|
|
ucidef_set_led_netdev "lan1" "lan1 link" "green:lan1" "lan1" "link"
|
|
ucidef_set_led_netdev "lan2" "lan2 link" "green:lan2" "lan2" "link"
|
|
ucidef_set_led_netdev "lan3" "lan3 link" "green:lan3" "lan3" "link"
|
|
ucidef_set_led_netdev "lan4" "lan4 link" "green:lan4" "lan4" "link"
|
|
ucidef_set_led_netdev "wan" "wan link" "green:wan" "wan" "link"
|
|
;;
|
|
mikrotik,routerboard-760igs)
|
|
ucidef_set_led_netdev "sfp" "SFP" "blue:sfp" "sfp"
|
|
;;
|
|
mikrotik,routerboard-m11g)
|
|
ucidef_set_rssimon "wlan0" "200000" "1"
|
|
ucidef_set_led_rssi "rssilow" "RSSILOW" "green:rssi0" "wlan0" "1" "100"
|
|
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "green:rssi1" "wlan0" "20" "100"
|
|
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:rssi2" "wlan0" "40" "100"
|
|
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssi3" "wlan0" "60" "100"
|
|
ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "green:rssi4" "wlan0" "80" "100"
|
|
;;
|
|
mtc,wr1201)
|
|
ucidef_set_led_netdev "eth_link" "LAN link" "green:eth_link" "br-lan"
|
|
;;
|
|
netgear,r6220|\
|
|
netgear,r6260|\
|
|
netgear,r6350|\
|
|
netgear,r6850|\
|
|
netgear,wac124|\
|
|
netgear,wndr3700-v5)
|
|
ucidef_set_led_netdev "wan" "wan" "green:wan" "wan"
|
|
;;
|
|
netgear,r6700-v2|\
|
|
netgear,r6800)
|
|
ucidef_set_led_netdev "wan" "WAN" "white:wan" "wan"
|
|
ucidef_set_led_netdev "lan1" "LAN1" "white:lan1" "lan1"
|
|
ucidef_set_led_netdev "lan2" "LAN2" "white:lan2" "lan2"
|
|
ucidef_set_led_netdev "lan3" "LAN3" "white:lan3" "lan3"
|
|
ucidef_set_led_netdev "lan4" "LAN4" "white:lan4" "lan4"
|
|
;;
|
|
tplink,re350-v1)
|
|
ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "blue:wifi2G" "wlan0"
|
|
ucidef_set_led_netdev "wifi5g" "Wifi 5G" "blue:wifi5G" "wlan1"
|
|
ucidef_set_led_netdev "eth_act" "LAN act" "green:eth_act" "lan" "tx rx"
|
|
ucidef_set_led_netdev "eth_link" "LAN link" "green:eth_link" "lan" "link"
|
|
;;
|
|
tplink,re500-v1|\
|
|
tplink,re650-v1)
|
|
ucidef_set_led_netdev "eth_act" "LAN act" "green:eth_act" "lan" "tx rx"
|
|
ucidef_set_led_netdev "eth_link" "LAN link" "green:eth_link" "lan" "link"
|
|
;;
|
|
xiaomi,mi-router-ac2100)
|
|
ucidef_set_led_netdev "wan-blue" "WAN (blue)" "blue:wan" "wan"
|
|
;;
|
|
xiaomi,redmi-router-ac2100)
|
|
ucidef_set_led_netdev "wan" "wan" "white:wan" "wan"
|
|
;;
|
|
youhua,wr1200js)
|
|
ucidef_set_led_netdev "internet" "INTERNET" "green:wan" "wan"
|
|
;;
|
|
esac
|
|
|
|
board_config_flush
|
|
|
|
exit 0
|