Difuse/difos
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
difos/target/linux/kirkwood/image/Makefile
Pawel Dembicki d2c3131b3f kirkwood: add support for Zyxel NSA310S 
Zyxel NSA310S is a NAS based on Marvell kirkwood SoC.

Specification:
 - Processor Marvell 88F6702 1 GHz
 - 256MB RAM
 - 128MB NAND
 - 1x GBE LAN port (PHY: Marvell 88E1318)
 - 2x USB 2.0
 - 1x SATA
 - 3x button
 - 7x leds
 - serial on J1 connector (115200 8N1) (GND-NOPIN-RX-TX-VCC)

Known issues:
 - no kernel module for RTC. [*]
 - buzzer (connected to MPP43) need to be drived by 1kHz signal
 - no kernel module for internal MCU connected via I2C[**]

[*]
Karoly Pocsi made simple, unofficial driver for HT1382.
It can be found here:
https://www.madadmin.com/zyxel-nsa320s-es-debian-linux-4-resz/

[**]
Karoly Pocsi found how CPU talk with MCU:
It is possible to query the MCU-controlled fan speed and temperature:
i2cget -y 0x0 0x0a 0x07
i2cget -y 0x0 0x0a 0x08
The first value (0x07) is the temperature in ° C, the second (0x08) is
the time in milliseconds to complete one fan revolution (rpm = 60,000 / value).
Info translated from:
https://www.madadmin.com/zyxel-nsa320s-es-debian-linux-4-resz/

Installation:

TFTP:
1. Run serial console and go to u-boot.
2. Copy u-boot via tftp and write to NAND:
	=> mw 0x0800000 0xffff 0x100000
	=> nand erase 0x0 100000
	=> setenv ipaddr 192.168.1.2
	=> setenv serverip 192.168.1.4
	=> tftp 0x0800000 nsa310s-u-boot.kwb
	=> nand write 0x0800000 0x0 0x100000
	=> reset
3. Run new u-Boot, repair bootcmd and restore MAC address from sticker
	=> setenv ethaddr AA:BB:CC:DD:EE:FF
	=> saveenv
4. Copy and run initramfs image
	=> setenv ipaddr 192.168.1.2
	=> setenv serverip 192.168.1.4
	=> tftpboot zyxel_nsa310s-initramfs-uImage
	=> bootm 0x800000
5. Download sysupgrade image and perform sysupgrade

USB:

1. Prepare usb fat32 drive with u-boot.kwb and initramfs image.
   Stick it to USB 2.0 port.
2. Run serial console and go to u-boot.
3. Copy u-boot from usb and write to NAND:
	=> mw 0x0800000 0xffff 0x100000
	=> nand erase 0x0 100000
	=> usb start
	=> fatload usb 0 0x0800000 u-boot.kwb
	=> nand write 0x0800000 0x0 0x100000
	=> reset
4. Run new u-Boot, repair bootcmd and restore MAC address from sticker
	=> setenv ethaddr AA:BB:CC:DD:EE:FF
	=> saveenv
5. Copy and run initramfs image:
	=> usb start
	=> fatload usb 0 0x0800000 initramfs-uImage
	=> bootm 0x800000
6. Download sysupgrade image and perform sysupgrade.

Based on work ThBexx <thomas.beckler@hotmail.com>
DTS based on dropped support in 0ebdf0c.

Tested-by: Lech Perczak <lech.perczak@gmail.com>
Reviewed-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[NSA310s -> NSA310S in DEVICE_MODEL]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-07-08 16:07:05 +02:00

169 lines
4.5 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2009-2013 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
KERNEL_LOADADDR:=0x8000
define Device/Default
PROFILES := Default
DEVICE_DTS = $$(if $$(BOARD_NAME),kirkwood-$$(BOARD_NAME),)
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
KERNEL := kernel-bin | append-dtb | uImage none
KERNEL_NAME := zImage
KERNEL_SUFFIX := -uImage
KERNEL_IN_UBI := 1
PAGESIZE := 2048
SUBPAGESIZE := 512
BLOCKSIZE := 128k
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-ubi
SUPPORTED_DEVICES = $(subst _,$(comma),$(1)) $$(BOARD_NAME)
endef
define Device/cisco_on100
DEVICE_VENDOR := Cisco Systems
DEVICE_MODEL := ON100
KERNEL_SIZE := 5376k
KERNEL_IN_UBI :=
UBINIZE_OPTS := -E 5
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
BOARD_NAME := on100
DEVICE_PACKAGES := kmod-mvsdio
endef
TARGET_DEVICES += cisco_on100
define Device/cloudengines_pogoe02
DEVICE_VENDOR := Cloud Engines
DEVICE_MODEL := Pogoplug E02
BOARD_NAME := pogo_e02
endef
TARGET_DEVICES += cloudengines_pogoe02
define Device/cloudengines_pogoplugv4
DEVICE_VENDOR := Cloud Engines
DEVICE_MODEL := Pogoplug V4
DEVICE_DTS := kirkwood-pogoplug-series-4
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-mvsdio kmod-usb3 \
kmod-gpio-button-hotplug
endef
TARGET_DEVICES += cloudengines_pogoplugv4
define Device/iom_iconnect-1.1
DEVICE_VENDOR := Iomega
DEVICE_MODEL := Iconnect
BOARD_NAME := iconnect
endef
TARGET_DEVICES += iom_iconnect-1.1
define Device/iom_ix2-200
DEVICE_VENDOR := Iomega
DEVICE_MODEL := StorCenter ix2-200
DEVICE_DTS := kirkwood-iomega_ix2_200
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-hwmon-lm63
PAGESIZE := 512
SUBPAGESIZE := 256
BLOCKSIZE := 16k
KERNEL_SIZE := 3072k
KERNEL_IN_UBI :=
UBINIZE_OPTS := -E 5
IMAGE_SIZE := 31744k
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
check-size
endef
TARGET_DEVICES += iom_ix2-200
define Device/linksys_audi
DEVICE_VENDOR := Linksys
DEVICE_MODEL := EA3500 (Audi)
DEVICE_PACKAGES := kmod-mwl8k wpad-basic kmod-gpio-button-hotplug
PAGESIZE := 512
SUBPAGESIZE := 256
BLOCKSIZE := 16k
KERNEL_SIZE := 2624k
KERNEL_IN_UBI :=
UBINIZE_OPTS := -E 5
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
BOARD_NAME := linksys-audi
endef
TARGET_DEVICES += linksys_audi
define Device/linksys_viper
DEVICE_VENDOR := Linksys
DEVICE_MODEL := E4200v2 / EA4500 (Viper)
DEVICE_PACKAGES := kmod-mwl8k wpad-basic kmod-gpio-button-hotplug
KERNEL_SIZE := 2688k
KERNEL_IN_UBI :=
UBINIZE_OPTS := -E 5
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
BOARD_NAME := linksys-viper
endef
TARGET_DEVICES += linksys_viper
define Device/raidsonic_ib-nas62x0
DEVICE_VENDOR := RaidSonic
DEVICE_MODEL := ICY BOX IB-NAS62x0
BOARD_NAME := ib62x0
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
endef
TARGET_DEVICES += raidsonic_ib-nas62x0
define Device/seagate_dockstar
DEVICE_VENDOR := Seagate
DEVICE_MODEL := FreeAgent Dockstar
BOARD_NAME := dockstar
endef
TARGET_DEVICES += seagate_dockstar
define Device/seagate_goflexnet
DEVICE_VENDOR := Seagate
DEVICE_MODEL := GoFlexNet
BOARD_NAME := goflexnet
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
endef
TARGET_DEVICES += seagate_goflexnet
define Device/seagate_goflexhome
DEVICE_VENDOR := Seagate
DEVICE_MODEL := GoFlexHome
BOARD_NAME := goflexhome
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
endef
TARGET_DEVICES += seagate_goflexhome
define Device/zyxel_nsa310b
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := NSA310b
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-r8169 kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-hwmon-lm85
BOARD_NAME := nsa310b
endef
TARGET_DEVICES += zyxel_nsa310b
define Device/zyxel_nsa310s
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := NSA310S
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-gpio-button-hotplug
DEVICE_DTS := kirkwood-nsa310s
endef
TARGET_DEVICES += zyxel_nsa310s
define Device/zyxel_nsa325
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := NSA325
DEVICE_VARIANT := v1/v2
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-rtc-pcf8563 kmod-usb3
BOARD_NAME := nsa325
endef
TARGET_DEVICES += zyxel_nsa325
$(eval $(call BuildImage))
Reference in a new issue View git blame Copy permalink