c2a7bb520a
Xiaomi Mi Router 4 is the same as Xiaomi Mi Router 3G, except for the RAM (256Mib→128Mib), LEDs and gpio (MiNet button). Specifications: Power: 12 VDC, 1 A Connector type: barrel CPU1: MediaTek MT7621A (880 MHz, 4 cores) FLA1: 128 MiB (ESMT F59L1G81MA) RAM1: 128 MiB (ESMT M15T1G1664A) WI1 chip1: MediaTek MT7603EN WI1 802dot11 protocols: bgn WI1 MIMO config: 2x2:2 WI1 antenna connector: U.FL WI2 chip1: MediaTek MT7612EN WI2 802dot11 protocols: an+ac WI2 MIMO config: 2x2:2 WI2 antenna connector: U.FL ETH chip1: MediaTek MT7621A Switch: MediaTek MT7621A UART Serial [o] TX [o] GND [o] RX [ ] VCC - Do not connect it MAC addresses as verified by OEM firmware: use address source LAN *:c2 factory 0xe000 (label) WAN *:c3 factory 0xe006 2g *:c4 factory 0x0000 5g *:c5 factory 0x8000 Flashing instructions: 1.Create a simple http server (nginx etc) 2.set uart enable To enable writing to the console, you must reset to factory settings Then you see uboot boot, press the keyboard 4 button (enter uboot command line) If it is not successful, repeat the above operation of restoring the factory settings. After entering the uboot command line, type: setenv uart_en 1 saveenv boot 3.use shell in uart cd /tmp wget http://"your_computer_ip:80"/openwrt-ramips-mt7621-xiaomi_mir4-squashfs-kernel1.bin wget http://"your_computer_ip:80"/openwrt-ramips-mt7621-xiaomi_mir4-squashfs-rootfs0.bin mtd write openwrt-ramips-mt7621-xiaomi_mir4-squashfs-kernel1.bin kernel1 mtd write openwrt-ramips-mt7621-xiaomi_mir4-squashfs-rootfs0.bin rootfs0 nvram set flag_try_sys1_failed=1 nvram commit reboot 4.login to the router http://192.168.1.1/ Installation via Software exploit Find the instructions in the https://github.com/acecilia/OpenWRTInvasion Signed-off-by: Dmytro Oz <sequentiality@gmail.com> [commit message facelift, rebase onto shared DTSI/common device definition, bump uboot-envtools] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
94 lines
2.1 KiB
Bash
Executable file
94 lines
2.1 KiB
Bash
Executable file
#
|
|
# Copyright (C) 2010 OpenWrt.org
|
|
#
|
|
|
|
PART_NAME=firmware
|
|
REQUIRE_IMAGE_METADATA=1
|
|
|
|
RAMFS_COPY_BIN='fw_printenv fw_setenv'
|
|
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
|
|
|
platform_check_image() {
|
|
return 0
|
|
}
|
|
|
|
platform_do_upgrade() {
|
|
local board=$(board_name)
|
|
|
|
case "$board" in
|
|
alfa-network,quad-e4g)
|
|
[ "$(fw_printenv -n dual_image 2>/dev/null)" = "1" ] &&\
|
|
[ -n "$(find_mtd_part backup)" ] && {
|
|
PART_NAME=backup
|
|
if [ "$(fw_printenv -n bootactive 2>/dev/null)" = "1" ]; then
|
|
fw_setenv bootactive 2 || exit 1
|
|
else
|
|
fw_setenv bootactive 1 || exit 1
|
|
fi
|
|
}
|
|
;;
|
|
mikrotik,routerboard-750gr3|\
|
|
mikrotik,routerboard-760igs|\
|
|
mikrotik,routerboard-m11g|\
|
|
mikrotik,routerboard-m33g)
|
|
[ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
|
|
;;
|
|
asus,rt-ac65p|\
|
|
asus,rt-ac85p)
|
|
echo "Backing up firmware"
|
|
dd if=/dev/mtd4 bs=1024 count=4096 > /tmp/backup_firmware.bin
|
|
dd if=/dev/mtd5 bs=1024 count=52224 >> /tmp/backup_firmware.bin
|
|
mtd -e firmware2 write /tmp/backup_firmware.bin firmware2
|
|
;;
|
|
esac
|
|
|
|
case "$board" in
|
|
asus,rt-ac65p|\
|
|
asus,rt-ac85p|\
|
|
dlink,dir-1960-a1|\
|
|
dlink,dir-2640-a1|\
|
|
dlink,dir-2660-a1|\
|
|
hiwifi,hc5962|\
|
|
linksys,ea7300-v1|\
|
|
linksys,ea7300-v2|\
|
|
linksys,ea7500-v2|\
|
|
netgear,r6220|\
|
|
netgear,r6260|\
|
|
netgear,r6350|\
|
|
netgear,r6700-v2|\
|
|
netgear,r6800|\
|
|
netgear,r6850|\
|
|
netgear,wac104|\
|
|
netgear,wac124|\
|
|
netis,wf2881|\
|
|
xiaomi,mi-router-3g|\
|
|
xiaomi,mi-router-3-pro|\
|
|
xiaomi,mi-router-4|\
|
|
xiaomi,mi-router-ac2100|\
|
|
xiaomi,redmi-router-ac2100)
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
iodata,wn-ax1167gr2|\
|
|
iodata,wn-ax2033gr|\
|
|
iodata,wn-dx1167r)
|
|
iodata_mstc_upgrade_prepare
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
ubnt,edgerouter-x|\
|
|
ubnt,edgerouter-x-sfp)
|
|
platform_upgrade_ubnt_erx "$1"
|
|
;;
|
|
zyxel,wap6805)
|
|
local kernel2_mtd="$(find_mtd_part Kernel2)"
|
|
[ "$(hexdump -n 4 -e '"%x"' $kernel2_mtd)" = "56190527" ] &&\
|
|
[ "$(hexdump -n 4 -s 104 -e '"%x"' $kernel2_mtd)" != "0" ] &&\
|
|
dd bs=4 count=1 seek=26 conv=notrunc if=/dev/zero of=$kernel2_mtd 2>/dev/null &&\
|
|
echo "Kernel2 sequence number was reset to 0"
|
|
CI_KERNPART="Kernel"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
*)
|
|
default_do_upgrade "$1"
|
|
;;
|
|
esac
|
|
}
|