ba59021d64
Specification:
• 650/600/216 MHz (CPU/DDR/AHB)
• 64 MB of RAM (DDR2)
• 32 MB of FLASH
• 2T2R 2.4 GHz
• 2x 10/100 Mbps Ethernet
• 1x USB 2.0 Host socket
• 1x miniPCIe slot
• UART for serial console
• 14x GPIO
Flash instructions:
Upgrading from ar71xx target:
• Upload image into the board:
scp openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin
root@192.168.1.1/tmp/
• Run sysupgrade
sysupgrade -F /tmp/openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin
Upgrading from u-boot:
• Set up tftp server with
openwrt-ath79-generic-8dev_lima-initramfs-kernel.bin
• Go to u-boot (reboot and press ESC when prompted)
• Set TFTP server IP
setenv serverip 192.168.1.254
• Set device ip from the same subnet
setenv ipaddr 192.168.1.1
• Copy new firmware to board
tftpboot 0x82000000 initramfs.bin
• Boot OpenWRT
bootm 0x82000000
• Upload image openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin into
the board
• Run sysupgrade.
Signed-off-by: Andrey Bondar <a.bondar@8devices.com>
170 lines
3.9 KiB
Bash
170 lines
3.9 KiB
Bash
#!/bin/sh
|
|
|
|
[ -e /lib/firmware/$FIRMWARE ] && exit 0
|
|
|
|
. /lib/functions/caldata.sh
|
|
|
|
board=$(board_name)
|
|
|
|
case "$FIRMWARE" in
|
|
"ath9k-eeprom-ahb-18100000.wmac.bin")
|
|
case $board in
|
|
8dev,lima|\
|
|
ubnt,unifi)
|
|
caldata_extract "art" 0x1000 0x800
|
|
;;
|
|
avm,fritz1750e|\
|
|
avm,fritz4020|\
|
|
avm,fritz450e|\
|
|
avm,fritzdvbc)
|
|
caldata_extract_reverse "urlader" 0x1541 0x440
|
|
;;
|
|
dlink,dap-2695-a1)
|
|
caldata_extract "art" 0x1000 0x440
|
|
ath9k_patch_mac $(mtd_get_mac_ascii bdcfg "wlanmac")
|
|
;;
|
|
dlink,dir-505|\
|
|
dlink,dir-825-c1|\
|
|
dlink,dir-835-a1)
|
|
caldata_extract "art" 0x1000 0x440
|
|
ath9k_patch_mac $(mtd_get_mac_text "mac" 0x4)
|
|
;;
|
|
dlink,dir-842-c1|\
|
|
dlink,dir-842-c2|\
|
|
dlink,dir-842-c3|\
|
|
dlink,dir-859-a1|\
|
|
nec,wg1200cr|\
|
|
wd,mynet-n750)
|
|
caldata_extract "art" 0x1000 0x440
|
|
ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
|
|
;;
|
|
engenius,ecb1750)
|
|
caldata_extract "art" 0x1000 0x440
|
|
ath9k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1)
|
|
;;
|
|
engenius,epg5000|\
|
|
iodata,wn-ac1167dgr|\
|
|
iodata,wn-ac1600dgr|\
|
|
iodata,wn-ac1600dgr2|\
|
|
iodata,wn-ag300dgr|\
|
|
sitecom,wlr-7100|\
|
|
sitecom,wlr-8100)
|
|
caldata_extract "art" 0x1000 0x440
|
|
ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr)
|
|
;;
|
|
enterasys,ws-ap3705i)
|
|
caldata_extract "calibrate" 0x1000 0x440
|
|
ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env0 RADIOADDR1)
|
|
;;
|
|
nec,wg800hp)
|
|
caldata_extract "art" 0x1000 0x440
|
|
ath9k_patch_mac $(mtd_get_mac_text board_data 0x680)
|
|
;;
|
|
qihoo,c301)
|
|
caldata_extract "radiocfg" 0x1000 0x440
|
|
ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
|
|
;;
|
|
*)
|
|
caldata_die "board $board is not supported yet"
|
|
;;
|
|
esac
|
|
;;
|
|
"ath9k-eeprom-pci-0000:00:00.0.bin")
|
|
case $board in
|
|
avm,fritz300e)
|
|
caldata_extract_reverse "urloader" 0x1541 0x440
|
|
;;
|
|
buffalo,wzr-hp-g302h-a1a0)
|
|
caldata_extract "art" 0x1000 0xeb8
|
|
;;
|
|
buffalo,wzr-hp-g450h)
|
|
caldata_extract "art" 0x1000 0x440
|
|
;;
|
|
dlink,dir-825-c1|\
|
|
dlink,dir-835-a1)
|
|
caldata_extract "art" 0x5000 0x440
|
|
ath9k_patch_mac $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1)
|
|
;;
|
|
enterasys,ws-ap3705i)
|
|
caldata_extract "calibrate" 0x5000 0x440
|
|
ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env0 RADIOADDR0)
|
|
;;
|
|
ocedo,raccoon|\
|
|
tplink,tl-wdr3500-v1|\
|
|
tplink,tl-wdr3600-v1|\
|
|
tplink,tl-wdr4300-v1|\
|
|
tplink,tl-wdr4300-v1-il|\
|
|
tplink,tl-wdr4310-v1|\
|
|
tplink,tl-wdr4900-v2|\
|
|
winchannel,wb2000)
|
|
caldata_extract "art" 0x5000 0x440
|
|
;;
|
|
netgear,wnr2200-8m|\
|
|
netgear,wnr2200-16m|\
|
|
pcs,cap324|\
|
|
tplink,tl-wr2543-v1|\
|
|
tplink,tl-wr842n-v1|\
|
|
ubnt,airrouter|\
|
|
ubnt,bullet-m-ar7240|\
|
|
ubnt,bullet-m-ar7241|\
|
|
ubnt,nanobridge-m|\
|
|
ubnt,nanostation-loco-m|\
|
|
ubnt,nanostation-m|\
|
|
ubnt,picostation-m|\
|
|
ubnt,rocket-m)
|
|
caldata_extract "art" 0x1000 0x1000
|
|
;;
|
|
wd,mynet-n750)
|
|
caldata_extract "art" 0x5000 0x440
|
|
ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
|
|
;;
|
|
wd,mynet-wifi-rangeextender)
|
|
caldata_extract "art" 0x1000 0x1000
|
|
ath9k_patch_mac $(nvram get wl0_hwaddr)
|
|
;;
|
|
*)
|
|
caldata_die "board $board is not supported yet"
|
|
;;
|
|
esac
|
|
;;
|
|
"ath9k-eeprom-pci-0000:00:11.0.bin")
|
|
case $board in
|
|
buffalo,wzr-hp-ag300h|\
|
|
netgear,wndr3700|\
|
|
netgear,wndr3700-v2|\
|
|
netgear,wndr3800|\
|
|
netgear,wndr3800ch|\
|
|
netgear,wndrmac-v1|\
|
|
netgear,wndrmac-v2)
|
|
caldata_extract "art" 0x1000 0xeb8
|
|
;;
|
|
dlink,dir-825-b1)
|
|
caldata_extract "caldata" 0x1000 0xeb8
|
|
ath9k_patch_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 0x20c
|
|
;;
|
|
*)
|
|
caldata_die "board $board is not supported yet"
|
|
;;
|
|
esac
|
|
;;
|
|
"ath9k-eeprom-pci-0000:00:12.0.bin")
|
|
case $board in
|
|
buffalo,wzr-hp-ag300h|\
|
|
netgear,wndr3700|\
|
|
netgear,wndr3700-v2|\
|
|
netgear,wndr3800|\
|
|
netgear,wndr3800ch|\
|
|
netgear,wndrmac-v1|\
|
|
netgear,wndrmac-v2)
|
|
caldata_extract "art" 0x5000 0xeb8
|
|
;;
|
|
dlink,dir-825-b1)
|
|
caldata_extract "caldata" 0x5000 0xeb8
|
|
ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 0x20c
|
|
;;
|
|
*)
|
|
caldata_die "board $board is not supported yet"
|
|
;;
|
|
esac
|
|
;;
|
|
esac
|