The underlying operating system for DifuseHQ's embedded routing devices
Find a file
Piotr Dymacz a422b171ac base-files: diag: restore default trigger for 'boot' LED
For devices without a dedicated 'diag' LED, we use sometimes one of
other LEDs for indicating at least 'boot', 'failsafe' and 'upgrade'
stages. In some cases, at the same time these LEDs have defined default
triggers in DTS using 'linux,default-trigger' property. Current 'diag'
setup removes the trigger and turns off 'boot' LED after bootup.

One of the examples of such device is TP-Link TL-WR841N v14 (ramips)
which uses 'wlan' LED with defined 'linux,default-trigger' for 'diag':

aliases {
        led-boot = &led_wlan;
        led-failsafe = &led_wlan;
        led-upgrade = &led_wlan;
};

[...]

led_wlan: wlan {
        label = "tl-wr841n-v14:green:wlan";
        gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
        linux,default-trigger = "phy0tpt";
};

This patch extends 'diag.sh' and 'leds.sh' scripts to make sure default
trigger defined in DTS is restored for 'diag' LED which isn't used for
indicating 'running' stage.

Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2020-02-24 23:27:50 +01:00
.github build: Update README & github help 2018-07-08 09:41:53 +01:00
config build: Add additional kernel debug options 2020-02-22 16:34:57 +01:00
include kernel: bump 4.19 to 4.19.106 2020-02-24 19:11:36 +01:00
package base-files: diag: restore default trigger for 'boot' LED 2020-02-24 23:27:50 +01:00
scripts scripts/arm-magic.sh: switch to /bin/sh 2020-01-02 23:59:20 +01:00
target kernel: Sort generic configuration 2020-02-24 23:25:28 +01:00
toolchain toolchain/binutils: Add binutils 2.34 2020-02-22 16:38:41 +01:00
tools tools/bison: Update to 3.5.1 2020-02-19 22:02:47 +01:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore gitignore: ignore patches in OpenWrt root directory 2019-11-06 00:27:55 +01:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in merge: base: update base-files and basic config 2017-12-08 19:41:18 +01:00
feeds.conf.default feeds: switch git.lede-project.org URLs to git.openwrt.org 2018-01-16 16:59:22 +01:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile build: add buildinfo as single Makefile target 2019-10-17 14:01:33 +02:00
README build: switch to Python 3 2019-07-26 08:09:16 +02:00
rules.mk rules.mk: remove "$(STAGING_DIR)/include" 2019-11-02 20:51:56 +01:00

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org