3bae740311
wakeup-source is required for gpio keys to fix error genirq: irq_chip msmgpio did not update eff. affinity mask Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
438 lines
7.6 KiB
Text
438 lines
7.6 KiB
Text
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "qcom-ipq8062.dtsi"
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/delete-node/ &nand_pins;
|
|
|
|
/ {
|
|
model = "NEC Platforms Aterm WG2600HP3";
|
|
compatible = "nec,wg2600hp3", "qcom,ipq8062", "qcom,ipq8064";
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x42000000 0x1e000000>;
|
|
};
|
|
|
|
aliases {
|
|
label-mac-device = &gmac2;
|
|
|
|
led-boot = &led_power_green;
|
|
led-failsafe = &led_power_red;
|
|
led-running = &led_power_green;
|
|
led-upgrade = &led_power_red;
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
pinctrl-0 = <&buttons_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
debounce-interval = <60>;
|
|
wakeup-source;
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
debounce-interval = <60>;
|
|
wakeup-source;
|
|
};
|
|
|
|
mode0 {
|
|
label = "mode0";
|
|
gpios = <&qcom_pinmux 40 GPIO_ACTIVE_LOW>;
|
|
linux,code = <BTN_0>;
|
|
linux,input-type = <EV_SW>;
|
|
debounce-interval = <60>;
|
|
wakeup-source;
|
|
};
|
|
|
|
mode1 {
|
|
label = "mode1";
|
|
gpios = <&qcom_pinmux 41 GPIO_ACTIVE_LOW>;
|
|
linux,code = <BTN_1>;
|
|
linux,input-type = <EV_SW>;
|
|
debounce-interval = <60>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
pinctrl-0 = <&leds_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
led_power_green: power_green {
|
|
label = "green:power";
|
|
gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
led_power_red: power_red {
|
|
label = "red:power";
|
|
gpios = <&qcom_pinmux 35 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
active_green {
|
|
label = "green:active";
|
|
gpios = <&qcom_pinmux 42 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
active_red {
|
|
label = "red:active";
|
|
gpios = <&qcom_pinmux 38 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wlan2g_green {
|
|
label = "green:wlan2g";
|
|
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "phy1tpt";
|
|
};
|
|
|
|
wlan2g_red {
|
|
label = "red:wlan2g";
|
|
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wlan5g_green {
|
|
label = "green:wlan5g";
|
|
gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "phy0tpt";
|
|
};
|
|
|
|
wlan5g_red {
|
|
label = "red:wlan5g";
|
|
gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
tv_green {
|
|
label = "green:tv";
|
|
gpios = <&qcom_pinmux 46 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
tv_red {
|
|
label = "red:tv";
|
|
gpios = <&qcom_pinmux 36 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
converter_green {
|
|
label = "green:converter";
|
|
gpios = <&qcom_pinmux 43 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
converter_red {
|
|
label = "red:converter";
|
|
gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&qcom_pinmux {
|
|
pinctrl-0 = <&akro_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
spi_pins: spi_pins {
|
|
mux {
|
|
pins = "gpio18", "gpio19", "gpio21";
|
|
function = "gsbi5";
|
|
bias-pull-down;
|
|
};
|
|
|
|
data {
|
|
pins = "gpio18", "gpio19";
|
|
drive-strength = <10>;
|
|
};
|
|
|
|
cs {
|
|
pins = "gpio20";
|
|
drive-strength = <10>;
|
|
};
|
|
|
|
clk {
|
|
pins = "gpio21";
|
|
drive-strength = <12>;
|
|
};
|
|
};
|
|
|
|
buttons_pins: buttons_pins {
|
|
mux {
|
|
pins = "gpio22", "gpio24", "gpio40",
|
|
"gpio41";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
leds_pins: leds_pins {
|
|
mux {
|
|
pins = "gpio14", "gpio15", "gpio35",
|
|
"gpio36", "gpio38", "gpio42",
|
|
"gpio43", "gpio46", "gpio55",
|
|
"gpio56", "gpio57", "gpio58";
|
|
function = "gpio";
|
|
bias-pull-down;
|
|
};
|
|
|
|
akro2 {
|
|
pins = "gpio15", "gpio35", "gpio38",
|
|
"gpio42", "gpio43", "gpio46",
|
|
"gpio55", "gpio56", "gpio57",
|
|
"gpio58";
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
akro4 {
|
|
pins = "gpio14", "gpio36";
|
|
drive-strength = <4>;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* Stock firmware has the following settings, so let's do the same.
|
|
* I don't sure why these are required.
|
|
*/
|
|
akro_pins: akro_pinmux {
|
|
akro {
|
|
pins = "gpio17", "gpio26", "gpio47";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
reset {
|
|
pins = "gpio45";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
output-low;
|
|
};
|
|
|
|
gmac0_rgmii {
|
|
pins = "gpio25";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
&gsbi5 {
|
|
status = "okay";
|
|
qcom,mode = <GSBI_PROT_SPI>;
|
|
|
|
spi@1a280000 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&spi_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <50000000>;
|
|
m25p,fast-read;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "SBL1";
|
|
reg = <0x0000000 0x0020000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@20000 {
|
|
label = "MIBIB";
|
|
reg = <0x0020000 0x0020000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@40000 {
|
|
label = "SBL2";
|
|
reg = <0x0040000 0x0040000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@80000 {
|
|
label = "SBL3";
|
|
reg = <0x0080000 0x0080000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "DDRCONFIG";
|
|
reg = <0x0100000 0x0010000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@110000 {
|
|
label = "SSD";
|
|
reg = <0x0110000 0x0010000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@120000 {
|
|
label = "TZ";
|
|
reg = <0x0120000 0x0080000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1a0000 {
|
|
label = "RPM";
|
|
reg = <0x01a0000 0x0080000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@220000 {
|
|
label = "APPSBL";
|
|
reg = <0x0220000 0x0080000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@2a0000 {
|
|
label = "APPSBLENV";
|
|
reg = <0x02a0000 0x0010000>;
|
|
read-only;
|
|
};
|
|
|
|
factory: partition@2b0000 {
|
|
label = "PRODUCTDATA";
|
|
reg = <0x02b0000 0x0030000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@2e0000 {
|
|
label = "ART";
|
|
reg = <0x02e0000 0x0040000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@320000 {
|
|
label = "TP";
|
|
reg = <0x0320000 0x0040000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@360000 {
|
|
label = "TINY";
|
|
reg = <0x0360000 0x0500000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@860000 {
|
|
compatible = "denx,uimage";
|
|
label = "firmware";
|
|
reg = <0x0860000 0x17a0000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&adm_dma {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0 {
|
|
status = "okay";
|
|
|
|
bridge@0,0 {
|
|
reg = <0x00000000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
wifi@1,0 {
|
|
compatible = "qcom,ath10k";
|
|
reg = <0x00010000 0 0 0 0>;
|
|
|
|
qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie1 {
|
|
status = "okay";
|
|
force_gen1 = <1>;
|
|
|
|
bridge@0,0 {
|
|
reg = <0x00000000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
wifi@1,0 {
|
|
compatible = "qcom,ath10k";
|
|
reg = <0x00010000 0 0 0 0>;
|
|
|
|
ieee80211-freq-limit = <2400000 2483000>;
|
|
qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdio0 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&mdio0_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
qca,ar8327-initvals = <
|
|
0x04 0x80080080 /* PAD0_MODE */
|
|
0x0c 0x06000000 /* PAD6_MODE */
|
|
0x10 0x002613a0 /* PWS_REG */
|
|
0x50 0xcc36cc36 /* LED_CTRL0 */
|
|
0x54 0xca36ca36 /* LED_CTRL1 */
|
|
0x58 0xc936c936 /* LED_CTRL2 */
|
|
0x5c 0x03ffff00 /* LED_CTRL3 */
|
|
0x7c 0x0000004e /* PORT0_STATUS */
|
|
0x94 0x0000004e /* PORT6_STATUS */
|
|
0xe0 0xc74164de /* SGMII_CTRL */
|
|
0xe4 0x0006a545 /* MAC_PWR_SEL */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&gmac1 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&rgmii2_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
phy-mode = "rgmii";
|
|
qcom,id = <1>;
|
|
mdiobus = <&mdio0>;
|
|
mtd-mac-address = <&factory 0x0>;
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
&gmac2 {
|
|
status = "okay";
|
|
phy-mode = "sgmii";
|
|
qcom,id = <2>;
|
|
mdiobus = <&mdio0>;
|
|
mtd-mac-address = <&factory 0x6>;
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|