8a4dc6f48c
The Ubiquiti Network airCube ISP is a cube shaped 2.4 GHz with internal
2x2 MIMO antennas. It can be supplied via a USB connector or via PoE.
There are for 10/100 Mbps ports (1 * WAN + 3 * LAN). There is an
optional PoE passthrough from the first LAN port to the WAN port.
SoC: Qualcomm / Atheros QCA9533-BL3A
RAM: 64 MB DDR2
Flash: 16 MB SPI NOR
Ethernet: 4x 10/100 Mbps (1 WAN + 3 LAN)
LEDS: 1x via a SPI controller (not yet supported)
Buttons: 1x Reset
Serial: 1x (only RX and TX); 115200 baud, 8N1
Missing points:
- LED not yet supported
- Factory upgrade via web IF or TFTP recovery not yet supported
(Needs RSA signed images, for details see PR#1958)
The serial port is on a four pin connextor labeled J1 and located
between Ethernet and USB connector. The pinout is:
1. 3V3 (out)
2. Rx (in)
3. Tx (out)
4. GND
Upgrading via serial port / U-Boot:
- Connect the serial port via a level converter
- Power the system and stop U-Boot with pressing any key when `Hit any
key to stop autoboot` is displayed. Note: Pressing space multiple
times untill U-Boot reaches that location works well.
- Connect a PC with the IP 192.168.1.100 (or some other in that net)
running a TFTP-Server to one of the LAN ports. Copy the sysupgrade
image to the server.
- Set the U-Boot server IP with
setenv serverip 192.168.1.100
- Load the flash image to RAM with
tftpboot 0x81000000 sysupgrade.bin
- Erase the flash with
erase 0x9f050000 0x9ffaffff
- Write the new flash content with
cp 0x81000000 0x9f050000 ${filesize}
- Reset the device with
reset
Signed-off-by: Christian Mauderer <oss@c-mauderer.de>
[removed full stop in subject and added lockdown note to commit message]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
36 lines
804 B
Bash
Executable file
36 lines
804 B
Bash
Executable file
#!/bin/sh
|
|
#
|
|
# Copyright (C) 2018 OpenWrt.org
|
|
#
|
|
|
|
. /lib/functions/uci-defaults.sh
|
|
|
|
board_config_update
|
|
|
|
board=$(board_name)
|
|
|
|
case "$board" in
|
|
comfast,cf-e5)
|
|
ucidef_add_gpio_switch "lte_power" "LTE Power" "14" "1"
|
|
ucidef_add_gpio_switch "lte_wakeup" "LTE Wakeup" "11" "1"
|
|
ucidef_add_gpio_switch "lte_poweroff" "LTE Poweroff" "1" "1"
|
|
ucidef_add_gpio_switch "lte_reset" "LTE Reset" "12" "1"
|
|
;;
|
|
dlink,dir-825-c1|\
|
|
dlink,dir-835-a1)
|
|
ucidef_add_gpio_switch "wan_led_auto" "WAN LED Auto" "20" "0"
|
|
;;
|
|
librerouter,librerouter-v1)
|
|
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "1" "0"
|
|
;;
|
|
ubnt,nanostation-ac)
|
|
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "3"
|
|
;;
|
|
ubnt,acb-isp)
|
|
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "11"
|
|
;;
|
|
esac
|
|
|
|
board_config_flush
|
|
|
|
exit 0
|