775523f628
Specifications: SoC: Mediatek MT7621AT (880 MHz MIPS dual-core, quad-thread, CPU) 512 Megabyte DDR3 SDRAM 32 Megabyte NOR Flash 4 Gigabit RJ45 PoE ports 2 MT7615N wifi chips (2.4GHz and 5GHz) 2 USB ports (1xUSB2 and 1xUSB3 - GL3510 chip) RJ45 RS232 port on front panel (Max3232 chip) 2x mPCIe 2.0 slots for 4G/5G cards 2x SIM slot 1x SDCard Slot Power via DC12V 4x Cell Antennae 4x Wifi Antennae MAC Address Locations: Purpose Ex. Partition Offset 2.4 Ghz *:01 factory 0x4 5 GHz *:02 factory 0x8004 LAN *:03 factory 0xe000 WAN *:04 factory 0xe006 MAC address prefix E4:3A:65 is registered to MofiNetwork Inc and used as the prefix for all MAC addresses. Manual: https://mofinetwork.com/files/MoFi_Network_MOFI5500_5GXeLTE_EM7690_SPECS.pdf WiFi chip specs: https://www.mediatek.com/products/broadband-wifi/mt7615 CPU chip specs: https://www.mediatek.com/products/home-networking/mt7621 Teardown Pictures: https://fccid.io/2AE6X-MOFI5500/Internal-Photos/Internal-Photos-5591739 Installation: Update Mofi 5500 to at least stock firmware version 4.8.6. (Available on the Mofi website.) Previous versions are untested in the upgrade process. Log into the LuCI web interface, usually at 192.168.10.1 and visit the 'System->Backup/Flash Firmware' page. Upload and flash the firmware as usual. Note to Maintainers: Do not remove SUPPORTED_DEVICES from the Makefile! The customized Mofi version of OpenWRT (stock firmware) expects to see mofi5500 as the device name. The stock firmware does not allow for forcing an installation. Without this line, users cannot upload the new firmware through the stock Mofi firmware. This device uses cell modems that could use QMI or MBIM. Add LuCI Modem Manager to allow people to use these. Also, if they have two cell network cards, ethernet, USB, or other kinds of networks, they may wish to use MWAN3 to allow failover amongst their networks. Please compile it with mwan3 for multiple WAN connections. Co-authored-by: Mieczyslaw Nalewaj <namiltd@yahoo.com> Signed-off-by: Rick Mac Gillis <noreply@rickmacgillis.com> |
||
|---|---|---|
| .devcontainer/ci-env | ||
| .github | ||
| .vscode | ||
| config | ||
| include | ||
| LICENSES | ||
| package | ||
| scripts | ||
| target | ||
| toolchain | ||
| tools | ||
| .gitattributes | ||
| .gitignore | ||
| BSDmakefile | ||
| Config.in | ||
| COPYING | ||
| feeds.conf.default | ||
| Makefile | ||
| README.md | ||
| rules.mk | ||
OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Sunshine!
Download
Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.
If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.
An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:
Development
To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.
Requirements
You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.
binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.7+ rsync subversion unzip which
Quickstart
-
Run
./scripts/feeds update -ato obtain all the latest package definitions defined in feeds.conf / feeds.conf.default -
Run
./scripts/feeds install -ato install symlinks for all obtained packages into package/feeds/ -
Run
make menuconfigto select your preferred configuration for the toolchain, target system & firmware packages. -
Run
maketo build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.
Related Repositories
The main repository uses multiple sub-repositories to manage packages of
different categories. All packages are installed via the OpenWrt package
manager called opkg. If you're looking to develop the web interface or port
packages to OpenWrt, please find the fitting repository below.
-
LuCI Web Interface: Modern and modular interface to control the device via a web browser.
-
OpenWrt Packages: Community repository of ported packages.
-
OpenWrt Routing: Packages specifically focused on (mesh) routing.
-
OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).
Support Information
For a list of supported devices see the OpenWrt Hardware Database
Documentation
Support Community
- Forum: For usage, projects, discussions and hardware advise.
- Support Chat: Channel
#openwrton oftc.net.
Developer Community
- Bug Reports: Report bugs in OpenWrt
- Dev Mailing List: Send patches
- Dev Chat: Channel
#openwrt-develon oftc.net.
License
OpenWrt is licensed under GPL-2.0