9ae927febd
The ingress filter registers use 2 bits for each port to define the filtering state, whereas the egress filter uses 1 bit. So for for the ingress filter the register offset for a given port is: (port >> 4) << 4: since there are 16 entries in a register of 32 bits and for the egress filter: (port >> 5) << 4: since there are 32 entries in a register of 32 bits Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
1820 lines
50 KiB
C
1820 lines
50 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
#include <net/dsa.h>
|
|
#include <linux/if_bridge.h>
|
|
|
|
#include <asm/mach-rtl838x/mach-rtl83xx.h>
|
|
#include "rtl83xx.h"
|
|
|
|
|
|
extern struct rtl83xx_soc_info soc_info;
|
|
|
|
|
|
static void rtl83xx_init_stats(struct rtl838x_switch_priv *priv)
|
|
{
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
/* Enable statistics module: all counters plus debug.
|
|
* On RTL839x all counters are enabled by default
|
|
*/
|
|
if (priv->family_id == RTL8380_FAMILY_ID)
|
|
sw_w32_mask(0, 3, RTL838X_STAT_CTRL);
|
|
|
|
/* Reset statistics counters */
|
|
sw_w32_mask(0, 1, priv->r->stat_rst);
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
}
|
|
|
|
static void rtl83xx_enable_phy_polling(struct rtl838x_switch_priv *priv)
|
|
{
|
|
int i;
|
|
u64 v = 0;
|
|
|
|
msleep(1000);
|
|
/* Enable all ports with a PHY, including the SFP-ports */
|
|
for (i = 0; i < priv->cpu_port; i++) {
|
|
if (priv->ports[i].phy)
|
|
v |= BIT_ULL(i);
|
|
}
|
|
|
|
pr_debug("%s: %16llx\n", __func__, v);
|
|
priv->r->set_port_reg_le(v, priv->r->smi_poll_ctrl);
|
|
|
|
/* PHY update complete, there is no global PHY polling enable bit on the 9300 */
|
|
if (priv->family_id == RTL8390_FAMILY_ID)
|
|
sw_w32_mask(0, BIT(7), RTL839X_SMI_GLB_CTRL);
|
|
else if(priv->family_id == RTL9300_FAMILY_ID)
|
|
sw_w32_mask(0, 0x8000, RTL838X_SMI_GLB_CTRL);
|
|
}
|
|
|
|
const struct rtl83xx_mib_desc rtl83xx_mib[] = {
|
|
MIB_DESC(2, 0xf8, "ifInOctets"),
|
|
MIB_DESC(2, 0xf0, "ifOutOctets"),
|
|
MIB_DESC(1, 0xec, "dot1dTpPortInDiscards"),
|
|
MIB_DESC(1, 0xe8, "ifInUcastPkts"),
|
|
MIB_DESC(1, 0xe4, "ifInMulticastPkts"),
|
|
MIB_DESC(1, 0xe0, "ifInBroadcastPkts"),
|
|
MIB_DESC(1, 0xdc, "ifOutUcastPkts"),
|
|
MIB_DESC(1, 0xd8, "ifOutMulticastPkts"),
|
|
MIB_DESC(1, 0xd4, "ifOutBroadcastPkts"),
|
|
MIB_DESC(1, 0xd0, "ifOutDiscards"),
|
|
MIB_DESC(1, 0xcc, ".3SingleCollisionFrames"),
|
|
MIB_DESC(1, 0xc8, ".3MultipleCollisionFrames"),
|
|
MIB_DESC(1, 0xc4, ".3DeferredTransmissions"),
|
|
MIB_DESC(1, 0xc0, ".3LateCollisions"),
|
|
MIB_DESC(1, 0xbc, ".3ExcessiveCollisions"),
|
|
MIB_DESC(1, 0xb8, ".3SymbolErrors"),
|
|
MIB_DESC(1, 0xb4, ".3ControlInUnknownOpcodes"),
|
|
MIB_DESC(1, 0xb0, ".3InPauseFrames"),
|
|
MIB_DESC(1, 0xac, ".3OutPauseFrames"),
|
|
MIB_DESC(1, 0xa8, "DropEvents"),
|
|
MIB_DESC(1, 0xa4, "tx_BroadcastPkts"),
|
|
MIB_DESC(1, 0xa0, "tx_MulticastPkts"),
|
|
MIB_DESC(1, 0x9c, "CRCAlignErrors"),
|
|
MIB_DESC(1, 0x98, "tx_UndersizePkts"),
|
|
MIB_DESC(1, 0x94, "rx_UndersizePkts"),
|
|
MIB_DESC(1, 0x90, "rx_UndersizedropPkts"),
|
|
MIB_DESC(1, 0x8c, "tx_OversizePkts"),
|
|
MIB_DESC(1, 0x88, "rx_OversizePkts"),
|
|
MIB_DESC(1, 0x84, "Fragments"),
|
|
MIB_DESC(1, 0x80, "Jabbers"),
|
|
MIB_DESC(1, 0x7c, "Collisions"),
|
|
MIB_DESC(1, 0x78, "tx_Pkts64Octets"),
|
|
MIB_DESC(1, 0x74, "rx_Pkts64Octets"),
|
|
MIB_DESC(1, 0x70, "tx_Pkts65to127Octets"),
|
|
MIB_DESC(1, 0x6c, "rx_Pkts65to127Octets"),
|
|
MIB_DESC(1, 0x68, "tx_Pkts128to255Octets"),
|
|
MIB_DESC(1, 0x64, "rx_Pkts128to255Octets"),
|
|
MIB_DESC(1, 0x60, "tx_Pkts256to511Octets"),
|
|
MIB_DESC(1, 0x5c, "rx_Pkts256to511Octets"),
|
|
MIB_DESC(1, 0x58, "tx_Pkts512to1023Octets"),
|
|
MIB_DESC(1, 0x54, "rx_Pkts512to1023Octets"),
|
|
MIB_DESC(1, 0x50, "tx_Pkts1024to1518Octets"),
|
|
MIB_DESC(1, 0x4c, "rx_StatsPkts1024to1518Octets"),
|
|
MIB_DESC(1, 0x48, "tx_Pkts1519toMaxOctets"),
|
|
MIB_DESC(1, 0x44, "rx_Pkts1519toMaxOctets"),
|
|
MIB_DESC(1, 0x40, "rxMacDiscards")
|
|
};
|
|
|
|
|
|
/* DSA callbacks */
|
|
|
|
|
|
static enum dsa_tag_protocol rtl83xx_get_tag_protocol(struct dsa_switch *ds,
|
|
int port,
|
|
enum dsa_tag_protocol mprot)
|
|
{
|
|
/* The switch does not tag the frames, instead internally the header
|
|
* structure for each packet is tagged accordingly.
|
|
*/
|
|
return DSA_TAG_PROTO_TRAILER;
|
|
}
|
|
|
|
/*
|
|
* Initialize all VLANS
|
|
*/
|
|
static void rtl83xx_vlan_setup(struct rtl838x_switch_priv *priv)
|
|
{
|
|
struct rtl838x_vlan_info info;
|
|
int i;
|
|
|
|
pr_info("In %s\n", __func__);
|
|
|
|
priv->r->vlan_profile_setup(0);
|
|
priv->r->vlan_profile_setup(1);
|
|
pr_info("UNKNOWN_MC_PMASK: %016llx\n", priv->r->read_mcast_pmask(UNKNOWN_MC_PMASK));
|
|
priv->r->vlan_profile_dump(0);
|
|
|
|
info.fid = 0; // Default Forwarding ID / MSTI
|
|
info.hash_uc_fid = false; // Do not build the L2 lookup hash with FID, but VID
|
|
info.hash_mc_fid = false; // Do the same for Multicast packets
|
|
info.profile_id = 0; // Use default Vlan Profile 0
|
|
info.tagged_ports = 0; // Initially no port members
|
|
|
|
// Initialize all vlans 0-4095
|
|
for (i = 0; i < MAX_VLANS; i ++)
|
|
priv->r->vlan_set_tagged(i, &info);
|
|
|
|
// reset PVIDs; defaults to 1 on reset
|
|
for (i = 0; i <= priv->ds->num_ports; i++)
|
|
sw_w32(0, priv->r->vlan_port_pb + (i << 2));
|
|
|
|
// Set forwarding action based on inner VLAN tag
|
|
for (i = 0; i < priv->cpu_port; i++)
|
|
priv->r->vlan_fwd_on_inner(i, true);
|
|
}
|
|
|
|
static int rtl83xx_setup(struct dsa_switch *ds)
|
|
{
|
|
int i;
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
u64 port_bitmap = BIT_ULL(priv->cpu_port);
|
|
|
|
pr_debug("%s called\n", __func__);
|
|
|
|
/* Disable MAC polling the PHY so that we can start configuration */
|
|
priv->r->set_port_reg_le(0ULL, priv->r->smi_poll_ctrl);
|
|
|
|
for (i = 0; i < ds->num_ports; i++)
|
|
priv->ports[i].enable = false;
|
|
priv->ports[priv->cpu_port].enable = true;
|
|
|
|
/* Isolate ports from each other: traffic only CPU <-> port */
|
|
/* Setting bit j in register RTL838X_PORT_ISO_CTRL(i) allows
|
|
* traffic from source port i to destination port j
|
|
*/
|
|
for (i = 0; i < priv->cpu_port; i++) {
|
|
if (priv->ports[i].phy) {
|
|
priv->r->set_port_reg_be(BIT_ULL(priv->cpu_port) | BIT_ULL(i),
|
|
priv->r->port_iso_ctrl(i));
|
|
port_bitmap |= BIT_ULL(i);
|
|
}
|
|
}
|
|
priv->r->set_port_reg_be(port_bitmap, priv->r->port_iso_ctrl(priv->cpu_port));
|
|
|
|
if (priv->family_id == RTL8380_FAMILY_ID)
|
|
rtl838x_print_matrix();
|
|
else
|
|
rtl839x_print_matrix();
|
|
|
|
rtl83xx_init_stats(priv);
|
|
|
|
rtl83xx_vlan_setup(priv);
|
|
|
|
ds->configure_vlan_while_not_filtering = true;
|
|
|
|
priv->r->l2_learning_setup();
|
|
|
|
/* Enable MAC Polling PHY again */
|
|
rtl83xx_enable_phy_polling(priv);
|
|
pr_debug("Please wait until PHY is settled\n");
|
|
msleep(1000);
|
|
priv->r->pie_init(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl930x_setup(struct dsa_switch *ds)
|
|
{
|
|
int i;
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
u32 port_bitmap = BIT(priv->cpu_port);
|
|
|
|
pr_info("%s called\n", __func__);
|
|
|
|
// Enable CSTI STP mode
|
|
// sw_w32(1, RTL930X_ST_CTRL);
|
|
|
|
/* Disable MAC polling the PHY so that we can start configuration */
|
|
sw_w32(0, RTL930X_SMI_POLL_CTRL);
|
|
|
|
// Disable all ports except CPU port
|
|
for (i = 0; i < ds->num_ports; i++)
|
|
priv->ports[i].enable = false;
|
|
priv->ports[priv->cpu_port].enable = true;
|
|
|
|
for (i = 0; i < priv->cpu_port; i++) {
|
|
if (priv->ports[i].phy) {
|
|
priv->r->traffic_set(i, BIT_ULL(priv->cpu_port) | BIT_ULL(i));
|
|
port_bitmap |= BIT_ULL(i);
|
|
}
|
|
}
|
|
priv->r->traffic_set(priv->cpu_port, port_bitmap);
|
|
|
|
rtl930x_print_matrix();
|
|
|
|
// TODO: Initialize statistics
|
|
|
|
rtl83xx_vlan_setup(priv);
|
|
|
|
ds->configure_vlan_while_not_filtering = true;
|
|
|
|
priv->r->l2_learning_setup();
|
|
|
|
rtl83xx_enable_phy_polling(priv);
|
|
|
|
priv->r->pie_init(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rtl83xx_phylink_validate(struct dsa_switch *ds, int port,
|
|
unsigned long *supported,
|
|
struct phylink_link_state *state)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
|
|
|
|
pr_debug("In %s port %d, state is %d", __func__, port, state->interface);
|
|
|
|
if (!phy_interface_mode_is_rgmii(state->interface) &&
|
|
state->interface != PHY_INTERFACE_MODE_NA &&
|
|
state->interface != PHY_INTERFACE_MODE_1000BASEX &&
|
|
state->interface != PHY_INTERFACE_MODE_MII &&
|
|
state->interface != PHY_INTERFACE_MODE_REVMII &&
|
|
state->interface != PHY_INTERFACE_MODE_GMII &&
|
|
state->interface != PHY_INTERFACE_MODE_QSGMII &&
|
|
state->interface != PHY_INTERFACE_MODE_INTERNAL &&
|
|
state->interface != PHY_INTERFACE_MODE_SGMII) {
|
|
bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
|
|
dev_err(ds->dev,
|
|
"Unsupported interface: %d for port %d\n",
|
|
state->interface, port);
|
|
return;
|
|
}
|
|
|
|
/* Allow all the expected bits */
|
|
phylink_set(mask, Autoneg);
|
|
phylink_set_port_modes(mask);
|
|
phylink_set(mask, Pause);
|
|
phylink_set(mask, Asym_Pause);
|
|
|
|
/* With the exclusion of MII and Reverse MII, we support Gigabit,
|
|
* including Half duplex
|
|
*/
|
|
if (state->interface != PHY_INTERFACE_MODE_MII &&
|
|
state->interface != PHY_INTERFACE_MODE_REVMII) {
|
|
phylink_set(mask, 1000baseT_Full);
|
|
phylink_set(mask, 1000baseT_Half);
|
|
}
|
|
|
|
/* On both the 8380 and 8382, ports 24-27 are SFP ports */
|
|
if (port >= 24 && port <= 27 && priv->family_id == RTL8380_FAMILY_ID)
|
|
phylink_set(mask, 1000baseX_Full);
|
|
|
|
/* On the RTL839x family of SoCs, ports 48 to 51 are SFP ports */
|
|
if (port >= 48 && port <= 51 && priv->family_id == RTL8390_FAMILY_ID)
|
|
phylink_set(mask, 1000baseX_Full);
|
|
|
|
phylink_set(mask, 10baseT_Half);
|
|
phylink_set(mask, 10baseT_Full);
|
|
phylink_set(mask, 100baseT_Half);
|
|
phylink_set(mask, 100baseT_Full);
|
|
|
|
bitmap_and(supported, supported, mask,
|
|
__ETHTOOL_LINK_MODE_MASK_NBITS);
|
|
bitmap_and(state->advertising, state->advertising, mask,
|
|
__ETHTOOL_LINK_MODE_MASK_NBITS);
|
|
}
|
|
|
|
static void rtl93xx_phylink_validate(struct dsa_switch *ds, int port,
|
|
unsigned long *supported,
|
|
struct phylink_link_state *state)
|
|
{
|
|
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
|
|
|
|
pr_debug("In %s port %d, state is %d (%s)", __func__, port, state->interface,
|
|
phy_modes(state->interface));
|
|
|
|
if (!phy_interface_mode_is_rgmii(state->interface) &&
|
|
state->interface != PHY_INTERFACE_MODE_NA &&
|
|
state->interface != PHY_INTERFACE_MODE_1000BASEX &&
|
|
state->interface != PHY_INTERFACE_MODE_MII &&
|
|
state->interface != PHY_INTERFACE_MODE_REVMII &&
|
|
state->interface != PHY_INTERFACE_MODE_GMII &&
|
|
state->interface != PHY_INTERFACE_MODE_QSGMII &&
|
|
state->interface != PHY_INTERFACE_MODE_XGMII &&
|
|
state->interface != PHY_INTERFACE_MODE_HSGMII &&
|
|
state->interface != PHY_INTERFACE_MODE_10GKR &&
|
|
state->interface != PHY_INTERFACE_MODE_USXGMII &&
|
|
state->interface != PHY_INTERFACE_MODE_INTERNAL &&
|
|
state->interface != PHY_INTERFACE_MODE_SGMII) {
|
|
bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
|
|
dev_err(ds->dev,
|
|
"Unsupported interface: %d for port %d\n",
|
|
state->interface, port);
|
|
return;
|
|
}
|
|
|
|
/* Allow all the expected bits */
|
|
phylink_set(mask, Autoneg);
|
|
phylink_set_port_modes(mask);
|
|
phylink_set(mask, Pause);
|
|
phylink_set(mask, Asym_Pause);
|
|
|
|
/* With the exclusion of MII and Reverse MII, we support Gigabit,
|
|
* including Half duplex
|
|
*/
|
|
if (state->interface != PHY_INTERFACE_MODE_MII &&
|
|
state->interface != PHY_INTERFACE_MODE_REVMII) {
|
|
phylink_set(mask, 1000baseT_Full);
|
|
phylink_set(mask, 1000baseT_Half);
|
|
}
|
|
|
|
/* On the RTL9300 family of SoCs, ports 26 to 27 may be SFP ports TODO: take out of .dts */
|
|
if (port >= 26 && port <= 27)
|
|
phylink_set(mask, 1000baseX_Full);
|
|
if (port >= 26 && port <= 27)
|
|
phylink_set(mask, 10000baseKR_Full);
|
|
|
|
phylink_set(mask, 10baseT_Half);
|
|
phylink_set(mask, 10baseT_Full);
|
|
phylink_set(mask, 100baseT_Half);
|
|
phylink_set(mask, 100baseT_Full);
|
|
|
|
bitmap_and(supported, supported, mask,
|
|
__ETHTOOL_LINK_MODE_MASK_NBITS);
|
|
bitmap_and(state->advertising, state->advertising, mask,
|
|
__ETHTOOL_LINK_MODE_MASK_NBITS);
|
|
}
|
|
|
|
static int rtl83xx_phylink_mac_link_state(struct dsa_switch *ds, int port,
|
|
struct phylink_link_state *state)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
u64 speed;
|
|
u64 link;
|
|
|
|
if (port < 0 || port > priv->cpu_port)
|
|
return -EINVAL;
|
|
|
|
state->link = 0;
|
|
link = priv->r->get_port_reg_le(priv->r->mac_link_sts);
|
|
if (link & BIT_ULL(port))
|
|
state->link = 1;
|
|
pr_debug("%s: link state port %d: %llx\n", __func__, port, link & BIT_ULL(port));
|
|
|
|
state->duplex = 0;
|
|
if (priv->r->get_port_reg_le(priv->r->mac_link_dup_sts) & BIT_ULL(port))
|
|
state->duplex = 1;
|
|
|
|
speed = priv->r->get_port_reg_le(priv->r->mac_link_spd_sts(port));
|
|
speed >>= (port % 16) << 1;
|
|
switch (speed & 0x3) {
|
|
case 0:
|
|
state->speed = SPEED_10;
|
|
break;
|
|
case 1:
|
|
state->speed = SPEED_100;
|
|
break;
|
|
case 2:
|
|
state->speed = SPEED_1000;
|
|
break;
|
|
case 3:
|
|
if (priv->family_id == RTL9300_FAMILY_ID
|
|
&& (port == 24 || port == 26)) /* Internal serdes */
|
|
state->speed = SPEED_2500;
|
|
else
|
|
state->speed = SPEED_100; /* Is in fact 500Mbit */
|
|
}
|
|
|
|
state->pause &= (MLO_PAUSE_RX | MLO_PAUSE_TX);
|
|
if (priv->r->get_port_reg_le(priv->r->mac_rx_pause_sts) & BIT_ULL(port))
|
|
state->pause |= MLO_PAUSE_RX;
|
|
if (priv->r->get_port_reg_le(priv->r->mac_tx_pause_sts) & BIT_ULL(port))
|
|
state->pause |= MLO_PAUSE_TX;
|
|
return 1;
|
|
}
|
|
|
|
static int rtl93xx_phylink_mac_link_state(struct dsa_switch *ds, int port,
|
|
struct phylink_link_state *state)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
u64 speed;
|
|
u64 link;
|
|
|
|
if (port < 0 || port > priv->cpu_port)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* On the RTL9300 for at least the RTL8226B PHY, the MAC-side link
|
|
* state needs to be read twice in order to read a correct result.
|
|
* This would not be necessary for ports connected e.g. to RTL8218D
|
|
* PHYs.
|
|
*/
|
|
state->link = 0;
|
|
link = priv->r->get_port_reg_le(priv->r->mac_link_sts);
|
|
link = priv->r->get_port_reg_le(priv->r->mac_link_sts);
|
|
if (link & BIT_ULL(port))
|
|
state->link = 1;
|
|
pr_debug("%s: link state port %d: %llx, media %08x\n", __func__, port,
|
|
link & BIT_ULL(port), sw_r32(RTL930X_MAC_LINK_MEDIA_STS));
|
|
|
|
state->duplex = 0;
|
|
if (priv->r->get_port_reg_le(priv->r->mac_link_dup_sts) & BIT_ULL(port))
|
|
state->duplex = 1;
|
|
|
|
speed = priv->r->get_port_reg_le(priv->r->mac_link_spd_sts(port));
|
|
speed >>= (port % 8) << 2;
|
|
switch (speed & 0xf) {
|
|
case 0:
|
|
state->speed = SPEED_10;
|
|
break;
|
|
case 1:
|
|
state->speed = SPEED_100;
|
|
break;
|
|
case 2:
|
|
case 7:
|
|
state->speed = SPEED_1000;
|
|
break;
|
|
case 4:
|
|
state->speed = SPEED_10000;
|
|
break;
|
|
case 5:
|
|
case 8:
|
|
state->speed = SPEED_2500;
|
|
break;
|
|
case 6:
|
|
state->speed = SPEED_5000;
|
|
break;
|
|
default:
|
|
pr_err("%s: unknown speed: %d\n", __func__, (u32)speed & 0xf);
|
|
}
|
|
|
|
pr_debug("%s: speed is: %d %d\n", __func__, (u32)speed & 0xf, state->speed);
|
|
state->pause &= (MLO_PAUSE_RX | MLO_PAUSE_TX);
|
|
if (priv->r->get_port_reg_le(priv->r->mac_rx_pause_sts) & BIT_ULL(port))
|
|
state->pause |= MLO_PAUSE_RX;
|
|
if (priv->r->get_port_reg_le(priv->r->mac_tx_pause_sts) & BIT_ULL(port))
|
|
state->pause |= MLO_PAUSE_TX;
|
|
return 1;
|
|
}
|
|
|
|
static void rtl83xx_config_interface(int port, phy_interface_t interface)
|
|
{
|
|
u32 old, int_shift, sds_shift;
|
|
|
|
switch (port) {
|
|
case 24:
|
|
int_shift = 0;
|
|
sds_shift = 5;
|
|
break;
|
|
case 26:
|
|
int_shift = 3;
|
|
sds_shift = 0;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
old = sw_r32(RTL838X_SDS_MODE_SEL);
|
|
switch (interface) {
|
|
case PHY_INTERFACE_MODE_1000BASEX:
|
|
if ((old >> sds_shift & 0x1f) == 4)
|
|
return;
|
|
sw_w32_mask(0x7 << int_shift, 1 << int_shift, RTL838X_INT_MODE_CTRL);
|
|
sw_w32_mask(0x1f << sds_shift, 4 << sds_shift, RTL838X_SDS_MODE_SEL);
|
|
break;
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
if ((old >> sds_shift & 0x1f) == 2)
|
|
return;
|
|
sw_w32_mask(0x7 << int_shift, 2 << int_shift, RTL838X_INT_MODE_CTRL);
|
|
sw_w32_mask(0x1f << sds_shift, 2 << sds_shift, RTL838X_SDS_MODE_SEL);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
pr_debug("configured port %d for interface %s\n", port, phy_modes(interface));
|
|
}
|
|
|
|
static void rtl83xx_phylink_mac_config(struct dsa_switch *ds, int port,
|
|
unsigned int mode,
|
|
const struct phylink_link_state *state)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
u32 reg;
|
|
int speed_bit = priv->family_id == RTL8380_FAMILY_ID ? 4 : 3;
|
|
|
|
pr_debug("%s port %d, mode %x\n", __func__, port, mode);
|
|
|
|
if (port == priv->cpu_port) {
|
|
/* Set Speed, duplex, flow control
|
|
* FORCE_EN | LINK_EN | NWAY_EN | DUP_SEL
|
|
* | SPD_SEL = 0b10 | FORCE_FC_EN | PHY_MASTER_SLV_MANUAL_EN
|
|
* | MEDIA_SEL
|
|
*/
|
|
if (priv->family_id == RTL8380_FAMILY_ID) {
|
|
sw_w32(0x6192F, priv->r->mac_force_mode_ctrl(priv->cpu_port));
|
|
/* allow CRC errors on CPU-port */
|
|
sw_w32_mask(0, 0x8, RTL838X_MAC_PORT_CTRL(priv->cpu_port));
|
|
} else {
|
|
sw_w32_mask(0, 3, priv->r->mac_force_mode_ctrl(priv->cpu_port));
|
|
}
|
|
return;
|
|
}
|
|
|
|
reg = sw_r32(priv->r->mac_force_mode_ctrl(port));
|
|
/* Auto-Negotiation does not work for MAC in RTL8390 */
|
|
if (priv->family_id == RTL8380_FAMILY_ID) {
|
|
if (mode == MLO_AN_PHY || phylink_autoneg_inband(mode)) {
|
|
pr_debug("PHY autonegotiates\n");
|
|
reg |= BIT(2);
|
|
sw_w32(reg, priv->r->mac_force_mode_ctrl(port));
|
|
rtl83xx_config_interface(port, state->interface);
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (mode != MLO_AN_FIXED)
|
|
pr_debug("Fixed state.\n");
|
|
|
|
if (priv->family_id == RTL8380_FAMILY_ID) {
|
|
/* Clear id_mode_dis bit, and the existing port mode, let
|
|
* RGMII_MODE_EN bet set by mac_link_{up,down}
|
|
*/
|
|
reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
|
|
|
|
if (state->pause & MLO_PAUSE_TXRX_MASK) {
|
|
if (state->pause & MLO_PAUSE_TX)
|
|
reg |= TX_PAUSE_EN;
|
|
reg |= RX_PAUSE_EN;
|
|
}
|
|
}
|
|
|
|
reg &= ~(3 << speed_bit);
|
|
switch (state->speed) {
|
|
case SPEED_1000:
|
|
reg |= 2 << speed_bit;
|
|
break;
|
|
case SPEED_100:
|
|
reg |= 1 << speed_bit;
|
|
break;
|
|
}
|
|
|
|
if (priv->family_id == RTL8380_FAMILY_ID) {
|
|
reg &= ~(DUPLEX_FULL | FORCE_LINK_EN);
|
|
if (state->link)
|
|
reg |= FORCE_LINK_EN;
|
|
if (state->duplex == DUPLEX_FULL)
|
|
reg |= DUPLX_MODE;
|
|
}
|
|
|
|
// Disable AN
|
|
if (priv->family_id == RTL8380_FAMILY_ID)
|
|
reg &= ~BIT(2);
|
|
sw_w32(reg, priv->r->mac_force_mode_ctrl(port));
|
|
}
|
|
|
|
static void rtl93xx_phylink_mac_config(struct dsa_switch *ds, int port,
|
|
unsigned int mode,
|
|
const struct phylink_link_state *state)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
int sds_num, sds_mode;
|
|
u32 reg;
|
|
|
|
pr_debug("%s port %d, mode %x, phy-mode: %s, speed %d, link %d\n", __func__,
|
|
port, mode, phy_modes(state->interface), state->speed, state->link);
|
|
|
|
// Nothing to be done for the CPU-port
|
|
if (port == priv->cpu_port)
|
|
return;
|
|
|
|
reg = sw_r32(priv->r->mac_force_mode_ctrl(port));
|
|
reg &= ~(0xf << 3);
|
|
|
|
// On the RTL930X, ports 24 to 27 are using an internal SerDes
|
|
if (port >=24 && port <= 27) {
|
|
sds_num = port - 18; // Port 24 mapped to SerDes 6, 25 to 7 ...
|
|
switch (state->interface) {
|
|
case PHY_INTERFACE_MODE_HSGMII:
|
|
sds_mode = 0x12;
|
|
break;
|
|
case PHY_INTERFACE_MODE_1000BASEX:
|
|
sds_mode = 0x1b; // 10G 1000X Auto
|
|
break;
|
|
case PHY_INTERFACE_MODE_XGMII:
|
|
sds_mode = 0x10;
|
|
break;
|
|
case PHY_INTERFACE_MODE_10GKR:
|
|
sds_mode = 0x1a;
|
|
// We need to use media sel for fibre media:
|
|
reg |= BIT(16);
|
|
break;
|
|
case PHY_INTERFACE_MODE_USXGMII:
|
|
sds_mode = 0x0d;
|
|
break;
|
|
default:
|
|
pr_err("%s: unknown serdes mode: %s\n",
|
|
__func__, phy_modes(state->interface));
|
|
return;
|
|
}
|
|
rtl9300_sds_rst(sds_num, sds_mode);
|
|
}
|
|
|
|
switch (state->speed) {
|
|
case SPEED_10000:
|
|
reg |= 4 << 3;
|
|
break;
|
|
case SPEED_5000:
|
|
reg |= 6 << 3;
|
|
break;
|
|
case SPEED_2500:
|
|
reg |= 5 << 3;
|
|
break;
|
|
case SPEED_1000:
|
|
reg |= 2 << 3;
|
|
break;
|
|
default:
|
|
reg |= 2 << 3;
|
|
break;
|
|
}
|
|
|
|
if (state->link)
|
|
reg |= FORCE_LINK_EN;
|
|
|
|
if (state->duplex == DUPLEX_FULL)
|
|
reg |= BIT(2);
|
|
|
|
reg |= 1; // Force Link up
|
|
sw_w32(reg, priv->r->mac_force_mode_ctrl(port));
|
|
}
|
|
|
|
static void rtl83xx_phylink_mac_link_down(struct dsa_switch *ds, int port,
|
|
unsigned int mode,
|
|
phy_interface_t interface)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
/* Stop TX/RX to port */
|
|
sw_w32_mask(0x3, 0, priv->r->mac_port_ctrl(port));
|
|
}
|
|
|
|
static void rtl93xx_phylink_mac_link_down(struct dsa_switch *ds, int port,
|
|
unsigned int mode,
|
|
phy_interface_t interface)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
/* Stop TX/RX to port */
|
|
sw_w32_mask(0x3, 0, priv->r->mac_port_ctrl(port));
|
|
|
|
// No longer force link
|
|
sw_w32_mask(3, 0, priv->r->mac_force_mode_ctrl(port));
|
|
}
|
|
|
|
static void rtl83xx_phylink_mac_link_up(struct dsa_switch *ds, int port,
|
|
unsigned int mode,
|
|
phy_interface_t interface,
|
|
struct phy_device *phydev,
|
|
int speed, int duplex,
|
|
bool tx_pause, bool rx_pause)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
/* Restart TX/RX to port */
|
|
sw_w32_mask(0, 0x3, priv->r->mac_port_ctrl(port));
|
|
// TODO: Set speed/duplex/pauses
|
|
}
|
|
|
|
static void rtl93xx_phylink_mac_link_up(struct dsa_switch *ds, int port,
|
|
unsigned int mode,
|
|
phy_interface_t interface,
|
|
struct phy_device *phydev,
|
|
int speed, int duplex,
|
|
bool tx_pause, bool rx_pause)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
|
|
/* Restart TX/RX to port */
|
|
sw_w32_mask(0, 0x3, priv->r->mac_port_ctrl(port));
|
|
// TODO: Set speed/duplex/pauses
|
|
}
|
|
|
|
static void rtl83xx_get_strings(struct dsa_switch *ds,
|
|
int port, u32 stringset, u8 *data)
|
|
{
|
|
int i;
|
|
|
|
if (stringset != ETH_SS_STATS)
|
|
return;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(rtl83xx_mib); i++)
|
|
strncpy(data + i * ETH_GSTRING_LEN, rtl83xx_mib[i].name,
|
|
ETH_GSTRING_LEN);
|
|
}
|
|
|
|
static void rtl83xx_get_ethtool_stats(struct dsa_switch *ds, int port,
|
|
uint64_t *data)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
const struct rtl83xx_mib_desc *mib;
|
|
int i;
|
|
u64 h;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(rtl83xx_mib); i++) {
|
|
mib = &rtl83xx_mib[i];
|
|
|
|
data[i] = sw_r32(priv->r->stat_port_std_mib + (port << 8) + 252 - mib->offset);
|
|
if (mib->size == 2) {
|
|
h = sw_r32(priv->r->stat_port_std_mib + (port << 8) + 248 - mib->offset);
|
|
data[i] |= h << 32;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int rtl83xx_get_sset_count(struct dsa_switch *ds, int port, int sset)
|
|
{
|
|
if (sset != ETH_SS_STATS)
|
|
return 0;
|
|
|
|
return ARRAY_SIZE(rtl83xx_mib);
|
|
}
|
|
|
|
static int rtl83xx_port_enable(struct dsa_switch *ds, int port,
|
|
struct phy_device *phydev)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
u64 v;
|
|
|
|
pr_debug("%s: %x %d", __func__, (u32) priv, port);
|
|
priv->ports[port].enable = true;
|
|
|
|
/* enable inner tagging on egress, do not keep any tags */
|
|
if (priv->family_id == RTL9310_FAMILY_ID)
|
|
sw_w32(BIT(4), priv->r->vlan_port_tag_sts_ctrl + (port << 2));
|
|
else
|
|
sw_w32(1, priv->r->vlan_port_tag_sts_ctrl + (port << 2));
|
|
|
|
if (dsa_is_cpu_port(ds, port))
|
|
return 0;
|
|
|
|
/* add port to switch mask of CPU_PORT */
|
|
priv->r->traffic_enable(priv->cpu_port, port);
|
|
|
|
/* add all other ports in the same bridge to switch mask of port */
|
|
v = priv->r->traffic_get(port);
|
|
v |= priv->ports[port].pm;
|
|
priv->r->traffic_set(port, v);
|
|
|
|
// TODO: Figure out if this is necessary
|
|
if (priv->family_id == RTL9300_FAMILY_ID) {
|
|
sw_w32_mask(0, BIT(port), RTL930X_L2_PORT_SABLK_CTRL);
|
|
sw_w32_mask(0, BIT(port), RTL930X_L2_PORT_DABLK_CTRL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rtl83xx_port_disable(struct dsa_switch *ds, int port)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
u64 v;
|
|
|
|
pr_debug("%s %x: %d", __func__, (u32)priv, port);
|
|
/* you can only disable user ports */
|
|
if (!dsa_is_user_port(ds, port))
|
|
return;
|
|
|
|
// BUG: This does not work on RTL931X
|
|
/* remove port from switch mask of CPU_PORT */
|
|
priv->r->traffic_disable(priv->cpu_port, port);
|
|
|
|
/* remove all other ports in the same bridge from switch mask of port */
|
|
v = priv->r->traffic_get(port);
|
|
v &= ~priv->ports[port].pm;
|
|
priv->r->traffic_set(port, v);
|
|
|
|
priv->ports[port].enable = false;
|
|
}
|
|
|
|
static int rtl83xx_set_mac_eee(struct dsa_switch *ds, int port,
|
|
struct ethtool_eee *e)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
|
|
if (e->eee_enabled && !priv->eee_enabled) {
|
|
pr_info("Globally enabling EEE\n");
|
|
priv->r->init_eee(priv, true);
|
|
}
|
|
|
|
priv->r->port_eee_set(priv, port, e->eee_enabled);
|
|
|
|
if (e->eee_enabled)
|
|
pr_info("Enabled EEE for port %d\n", port);
|
|
else
|
|
pr_info("Disabled EEE for port %d\n", port);
|
|
return 0;
|
|
}
|
|
|
|
static int rtl83xx_get_mac_eee(struct dsa_switch *ds, int port,
|
|
struct ethtool_eee *e)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
|
|
e->supported = SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full;
|
|
|
|
priv->r->eee_port_ability(priv, e, port);
|
|
|
|
e->eee_enabled = priv->ports[port].eee_enabled;
|
|
|
|
e->eee_active = !!(e->advertised & e->lp_advertised);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl93xx_get_mac_eee(struct dsa_switch *ds, int port,
|
|
struct ethtool_eee *e)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
|
|
e->supported = SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full
|
|
| SUPPORTED_2500baseX_Full;
|
|
|
|
priv->r->eee_port_ability(priv, e, port);
|
|
|
|
e->eee_enabled = priv->ports[port].eee_enabled;
|
|
|
|
e->eee_active = !!(e->advertised & e->lp_advertised);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set Switch L2 Aging time, t is time in milliseconds
|
|
* t = 0: aging is disabled
|
|
*/
|
|
static int rtl83xx_set_l2aging(struct dsa_switch *ds, u32 t)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
int t_max = priv->family_id == RTL8380_FAMILY_ID ? 0x7fffff : 0x1FFFFF;
|
|
|
|
/* Convert time in mseconds to internal value */
|
|
if (t > 0x10000000) { /* Set to maximum */
|
|
t = t_max;
|
|
} else {
|
|
if (priv->family_id == RTL8380_FAMILY_ID)
|
|
t = ((t * 625) / 1000 + 127) / 128;
|
|
else
|
|
t = (t * 5 + 2) / 3;
|
|
}
|
|
sw_w32(t, priv->r->l2_ctrl_1);
|
|
return 0;
|
|
}
|
|
|
|
static int rtl83xx_port_bridge_join(struct dsa_switch *ds, int port,
|
|
struct net_device *bridge)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
u64 port_bitmap = BIT_ULL(priv->cpu_port), v;
|
|
int i;
|
|
|
|
pr_debug("%s %x: %d %llx", __func__, (u32)priv, port, port_bitmap);
|
|
mutex_lock(&priv->reg_mutex);
|
|
for (i = 0; i < ds->num_ports; i++) {
|
|
/* Add this port to the port matrix of the other ports in the
|
|
* same bridge. If the port is disabled, port matrix is kept
|
|
* and not being setup until the port becomes enabled.
|
|
*/
|
|
if (dsa_is_user_port(ds, i) && i != port) {
|
|
if (dsa_to_port(ds, i)->bridge_dev != bridge)
|
|
continue;
|
|
if (priv->ports[i].enable)
|
|
priv->r->traffic_enable(i, port);
|
|
|
|
priv->ports[i].pm |= BIT_ULL(port);
|
|
port_bitmap |= BIT_ULL(i);
|
|
}
|
|
}
|
|
|
|
/* Add all other ports to this port matrix. */
|
|
if (priv->ports[port].enable) {
|
|
priv->r->traffic_enable(priv->cpu_port, port);
|
|
v = priv->r->traffic_get(port);
|
|
v |= port_bitmap;
|
|
priv->r->traffic_set(port, v);
|
|
}
|
|
priv->ports[port].pm |= port_bitmap;
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rtl83xx_port_bridge_leave(struct dsa_switch *ds, int port,
|
|
struct net_device *bridge)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
u64 port_bitmap = BIT_ULL(priv->cpu_port), v;
|
|
int i;
|
|
|
|
pr_debug("%s %x: %d", __func__, (u32)priv, port);
|
|
mutex_lock(&priv->reg_mutex);
|
|
for (i = 0; i < ds->num_ports; i++) {
|
|
/* Remove this port from the port matrix of the other ports
|
|
* in the same bridge. If the port is disabled, port matrix
|
|
* is kept and not being setup until the port becomes enabled.
|
|
* And the other port's port matrix cannot be broken when the
|
|
* other port is still a VLAN-aware port.
|
|
*/
|
|
if (dsa_is_user_port(ds, i) && i != port) {
|
|
if (dsa_to_port(ds, i)->bridge_dev != bridge)
|
|
continue;
|
|
if (priv->ports[i].enable)
|
|
priv->r->traffic_disable(i, port);
|
|
|
|
priv->ports[i].pm |= BIT_ULL(port);
|
|
port_bitmap &= ~BIT_ULL(i);
|
|
}
|
|
}
|
|
|
|
/* Add all other ports to this port matrix. */
|
|
if (priv->ports[port].enable) {
|
|
v = priv->r->traffic_get(port);
|
|
v |= port_bitmap;
|
|
priv->r->traffic_set(port, v);
|
|
}
|
|
priv->ports[port].pm &= ~port_bitmap;
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
}
|
|
|
|
void rtl83xx_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
|
|
{
|
|
u32 msti = 0;
|
|
u32 port_state[4];
|
|
int index, bit;
|
|
int pos = port;
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
int n = priv->port_width << 1;
|
|
|
|
/* Ports above or equal CPU port can never be configured */
|
|
if (port >= priv->cpu_port)
|
|
return;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
/* For the RTL839x and following, the bits are left-aligned, 838x and 930x
|
|
* have 64 bit fields, 839x and 931x have 128 bit fields
|
|
*/
|
|
if (priv->family_id == RTL8390_FAMILY_ID)
|
|
pos += 12;
|
|
if (priv->family_id == RTL9300_FAMILY_ID)
|
|
pos += 3;
|
|
if (priv->family_id == RTL9310_FAMILY_ID)
|
|
pos += 8;
|
|
|
|
index = n - (pos >> 4) - 1;
|
|
bit = (pos << 1) % 32;
|
|
|
|
priv->r->stp_get(priv, msti, port_state);
|
|
|
|
pr_debug("Current state, port %d: %d\n", port, (port_state[index] >> bit) & 3);
|
|
port_state[index] &= ~(3 << bit);
|
|
|
|
switch (state) {
|
|
case BR_STATE_DISABLED: /* 0 */
|
|
port_state[index] |= (0 << bit);
|
|
break;
|
|
case BR_STATE_BLOCKING: /* 4 */
|
|
case BR_STATE_LISTENING: /* 1 */
|
|
port_state[index] |= (1 << bit);
|
|
break;
|
|
case BR_STATE_LEARNING: /* 2 */
|
|
port_state[index] |= (2 << bit);
|
|
break;
|
|
case BR_STATE_FORWARDING: /* 3*/
|
|
port_state[index] |= (3 << bit);
|
|
default:
|
|
break;
|
|
}
|
|
|
|
priv->r->stp_set(priv, msti, port_state);
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
}
|
|
|
|
void rtl83xx_fast_age(struct dsa_switch *ds, int port)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
int s = priv->family_id == RTL8390_FAMILY_ID ? 2 : 0;
|
|
|
|
pr_debug("FAST AGE port %d\n", port);
|
|
mutex_lock(&priv->reg_mutex);
|
|
/* RTL838X_L2_TBL_FLUSH_CTRL register bits, 839x has 1 bit larger
|
|
* port fields:
|
|
* 0-4: Replacing port
|
|
* 5-9: Flushed/replaced port
|
|
* 10-21: FVID
|
|
* 22: Entry types: 1: dynamic, 0: also static
|
|
* 23: Match flush port
|
|
* 24: Match FVID
|
|
* 25: Flush (0) or replace (1) L2 entries
|
|
* 26: Status of action (1: Start, 0: Done)
|
|
*/
|
|
sw_w32(1 << (26 + s) | 1 << (23 + s) | port << (5 + (s / 2)), priv->r->l2_tbl_flush_ctrl);
|
|
|
|
do { } while (sw_r32(priv->r->l2_tbl_flush_ctrl) & BIT(26 + s));
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
}
|
|
|
|
void rtl930x_fast_age(struct dsa_switch *ds, int port)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
|
|
pr_debug("FAST AGE port %d\n", port);
|
|
mutex_lock(&priv->reg_mutex);
|
|
sw_w32(port << 11, RTL930X_L2_TBL_FLUSH_CTRL + 4);
|
|
|
|
sw_w32(BIT(26) | BIT(30), RTL930X_L2_TBL_FLUSH_CTRL);
|
|
|
|
do { } while (sw_r32(priv->r->l2_tbl_flush_ctrl) & BIT(30));
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
}
|
|
|
|
static int rtl83xx_vlan_filtering(struct dsa_switch *ds, int port,
|
|
bool vlan_filtering,
|
|
struct switchdev_trans *trans)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
|
|
pr_debug("%s: port %d\n", __func__, port);
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
if (vlan_filtering) {
|
|
/* Enable ingress and egress filtering
|
|
* The VLAN_PORT_IGR_FILTER register uses 2 bits for each port to define
|
|
* the filter action:
|
|
* 0: Always Forward
|
|
* 1: Drop packet
|
|
* 2: Trap packet to CPU port
|
|
* The Egress filter used 1 bit per state (0: DISABLED, 1: ENABLED)
|
|
*/
|
|
if (port != priv->cpu_port)
|
|
sw_w32_mask(0b10 << ((port % 16) << 1), 0b01 << ((port % 16) << 1),
|
|
priv->r->vlan_port_igr_filter + ((port >> 4) << 2));
|
|
sw_w32_mask(0, BIT(port % 32), priv->r->vlan_port_egr_filter + ((port >> 5) << 2));
|
|
} else {
|
|
/* Disable ingress and egress filtering */
|
|
if (port != priv->cpu_port)
|
|
sw_w32_mask(0b11 << ((port % 16) << 1), 0,
|
|
priv->r->vlan_port_igr_filter + ((port >> 4) << 2));
|
|
sw_w32_mask(BIT(port % 32), 0, priv->r->vlan_port_egr_filter + ((port >> 5) << 2));
|
|
}
|
|
|
|
/* Do we need to do something to the CPU-Port, too? */
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl83xx_vlan_prepare(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_vlan *vlan)
|
|
{
|
|
struct rtl838x_vlan_info info;
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
|
|
priv->r->vlan_tables_read(0, &info);
|
|
|
|
pr_debug("VLAN 0: Tagged ports %llx, untag %llx, profile %d, MC# %d, UC# %d, FID %x\n",
|
|
info.tagged_ports, info.untagged_ports, info.profile_id,
|
|
info.hash_mc_fid, info.hash_uc_fid, info.fid);
|
|
|
|
priv->r->vlan_tables_read(1, &info);
|
|
pr_debug("VLAN 1: Tagged ports %llx, untag %llx, profile %d, MC# %d, UC# %d, FID %x\n",
|
|
info.tagged_ports, info.untagged_ports, info.profile_id,
|
|
info.hash_mc_fid, info.hash_uc_fid, info.fid);
|
|
priv->r->vlan_set_untagged(1, info.untagged_ports);
|
|
pr_debug("SET: Untagged ports, VLAN %d: %llx\n", 1, info.untagged_ports);
|
|
|
|
priv->r->vlan_set_tagged(1, &info);
|
|
pr_debug("SET: Tagged ports, VLAN %d: %llx\n", 1, info.tagged_ports);
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
return 0;
|
|
}
|
|
|
|
static void rtl83xx_vlan_add(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_vlan *vlan)
|
|
{
|
|
struct rtl838x_vlan_info info;
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
int v;
|
|
|
|
pr_debug("%s port %d, vid_end %d, vid_end %d, flags %x\n", __func__,
|
|
port, vlan->vid_begin, vlan->vid_end, vlan->flags);
|
|
|
|
if (vlan->vid_begin > 4095 || vlan->vid_end > 4095) {
|
|
dev_err(priv->dev, "VLAN out of range: %d - %d",
|
|
vlan->vid_begin, vlan->vid_end);
|
|
return;
|
|
}
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
if (vlan->flags & BRIDGE_VLAN_INFO_PVID) {
|
|
for (v = vlan->vid_begin; v <= vlan->vid_end; v++) {
|
|
if (!v)
|
|
continue;
|
|
/* Set both inner and outer PVID of the port */
|
|
sw_w32((v << 16) | v << 2, priv->r->vlan_port_pb + (port << 2));
|
|
priv->ports[port].pvid = vlan->vid_end;
|
|
}
|
|
}
|
|
|
|
for (v = vlan->vid_begin; v <= vlan->vid_end; v++) {
|
|
/* Get port memberships of this vlan */
|
|
priv->r->vlan_tables_read(v, &info);
|
|
|
|
/* new VLAN? */
|
|
if (!info.tagged_ports) {
|
|
info.fid = 0;
|
|
info.hash_mc_fid = false;
|
|
info.hash_uc_fid = false;
|
|
info.profile_id = 0;
|
|
}
|
|
|
|
/* sanitize untagged_ports - must be a subset */
|
|
if (info.untagged_ports & ~info.tagged_ports)
|
|
info.untagged_ports = 0;
|
|
|
|
info.tagged_ports |= BIT_ULL(port);
|
|
if (vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED)
|
|
info.untagged_ports |= BIT_ULL(port);
|
|
|
|
priv->r->vlan_set_untagged(v, info.untagged_ports);
|
|
pr_debug("Untagged ports, VLAN %d: %llx\n", v, info.untagged_ports);
|
|
|
|
priv->r->vlan_set_tagged(v, &info);
|
|
pr_debug("Tagged ports, VLAN %d: %llx\n", v, info.tagged_ports);
|
|
}
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
}
|
|
|
|
static int rtl83xx_vlan_del(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_vlan *vlan)
|
|
{
|
|
struct rtl838x_vlan_info info;
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
int v;
|
|
u16 pvid;
|
|
|
|
pr_debug("%s: port %d, vid_end %d, vid_end %d, flags %x\n", __func__,
|
|
port, vlan->vid_begin, vlan->vid_end, vlan->flags);
|
|
|
|
if (vlan->vid_begin > 4095 || vlan->vid_end > 4095) {
|
|
dev_err(priv->dev, "VLAN out of range: %d - %d",
|
|
vlan->vid_begin, vlan->vid_end);
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
pvid = priv->ports[port].pvid;
|
|
|
|
for (v = vlan->vid_begin; v <= vlan->vid_end; v++) {
|
|
/* Reset to default if removing the current PVID */
|
|
if (v == pvid)
|
|
sw_w32(0, priv->r->vlan_port_pb + (port << 2));
|
|
|
|
/* Get port memberships of this vlan */
|
|
priv->r->vlan_tables_read(v, &info);
|
|
|
|
/* remove port from both tables */
|
|
info.untagged_ports &= (~BIT_ULL(port));
|
|
info.tagged_ports &= (~BIT_ULL(port));
|
|
|
|
priv->r->vlan_set_untagged(v, info.untagged_ports);
|
|
pr_debug("Untagged ports, VLAN %d: %llx\n", v, info.untagged_ports);
|
|
|
|
priv->r->vlan_set_tagged(v, &info);
|
|
pr_debug("Tagged ports, VLAN %d: %llx\n", v, info.tagged_ports);
|
|
}
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dump_l2_entry(struct rtl838x_l2_entry *e)
|
|
{
|
|
pr_info("MAC: %02x:%02x:%02x:%02x:%02x:%02x vid: %d, rvid: %d, port: %d, valid: %d\n",
|
|
e->mac[0], e->mac[1], e->mac[2], e->mac[3], e->mac[4], e->mac[5],
|
|
e->vid, e->rvid, e->port, e->valid);
|
|
|
|
if (e->type != L2_MULTICAST) {
|
|
pr_info("Type: %d, is_static: %d, is_ip_mc: %d, is_ipv6_mc: %d, block_da: %d\n",
|
|
e->type, e->is_static, e->is_ip_mc, e->is_ipv6_mc, e->block_da);
|
|
pr_info(" block_sa: %d, susp: %d, nh: %d, age: %d, is_trunk: %d, trunk: %d\n",
|
|
e->block_sa, e->suspended, e->next_hop, e->age, e->is_trunk, e->trunk);
|
|
}
|
|
if (e->type == L2_MULTICAST)
|
|
pr_info(" L2_MULTICAST mc_portmask_index: %d\n", e->mc_portmask_index);
|
|
if (e->is_ip_mc || e->is_ipv6_mc)
|
|
pr_info(" mc_portmask_index: %d, mc_gip: %d, mc_sip: %d\n",
|
|
e->mc_portmask_index, e->mc_gip, e->mc_sip);
|
|
pr_info(" stack_dev: %d\n", e->stack_dev);
|
|
if (e->next_hop)
|
|
pr_info(" nh_route_id: %d\n", e->nh_route_id);
|
|
}
|
|
|
|
static void rtl83xx_setup_l2_uc_entry(struct rtl838x_l2_entry *e, int port, int vid, u64 mac)
|
|
{
|
|
e->is_ip_mc = e->is_ipv6_mc = false;
|
|
e->valid = true;
|
|
e->age = 3;
|
|
e->port = port,
|
|
e->vid = vid;
|
|
u64_to_ether_addr(mac, e->mac);
|
|
}
|
|
|
|
static void rtl83xx_setup_l2_mc_entry(struct rtl838x_switch_priv *priv,
|
|
struct rtl838x_l2_entry *e, int vid, u64 mac, int mc_group)
|
|
{
|
|
e->is_ip_mc = e->is_ipv6_mc = false;
|
|
e->valid = true;
|
|
e->mc_portmask_index = mc_group;
|
|
e->type = L2_MULTICAST;
|
|
e->rvid = e->vid = vid;
|
|
pr_debug("%s: vid: %d, rvid: %d\n", __func__, e->vid, e->rvid);
|
|
u64_to_ether_addr(mac, e->mac);
|
|
}
|
|
|
|
/*
|
|
* Uses the seed to identify a hash bucket in the L2 using the derived hash key and then loops
|
|
* over the entries in the bucket until either a matching entry is found or an empty slot
|
|
* Returns the filled in rtl838x_l2_entry and the index in the bucket when an entry was found
|
|
* when an empty slot was found and must exist is false, the index of the slot is returned
|
|
* when no slots are available returns -1
|
|
*/
|
|
static int rtl83xx_find_l2_hash_entry(struct rtl838x_switch_priv *priv, u64 seed,
|
|
bool must_exist, struct rtl838x_l2_entry *e)
|
|
{
|
|
int i, idx = -1;
|
|
u32 key = priv->r->l2_hash_key(priv, seed);
|
|
u64 entry;
|
|
|
|
pr_debug("%s: using key %x, for seed %016llx\n", __func__, key, seed);
|
|
// Loop over all entries in the hash-bucket and over the second block on 93xx SoCs
|
|
for (i = 0; i < priv->l2_bucket_size; i++) {
|
|
entry = priv->r->read_l2_entry_using_hash(key, i, e);
|
|
pr_debug("valid %d, mac %016llx\n", e->valid, ether_addr_to_u64(&e->mac[0]));
|
|
if (must_exist && !e->valid)
|
|
continue;
|
|
if (!e->valid || ((entry & 0x0fffffffffffffffULL) == seed)) {
|
|
idx = i > 3 ? ((key >> 14) & 0xffff) | i >> 1 : ((key << 2) | i) & 0xffff;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return idx;
|
|
}
|
|
|
|
/*
|
|
* Uses the seed to identify an entry in the CAM by looping over all its entries
|
|
* Returns the filled in rtl838x_l2_entry and the index in the CAM when an entry was found
|
|
* when an empty slot was found the index of the slot is returned
|
|
* when no slots are available returns -1
|
|
*/
|
|
static int rtl83xx_find_l2_cam_entry(struct rtl838x_switch_priv *priv, u64 seed,
|
|
bool must_exist, struct rtl838x_l2_entry *e)
|
|
{
|
|
int i, idx = -1;
|
|
u64 entry;
|
|
|
|
for (i = 0; i < 64; i++) {
|
|
entry = priv->r->read_cam(i, e);
|
|
if (!must_exist && !e->valid) {
|
|
if (idx < 0) /* First empty entry? */
|
|
idx = i;
|
|
break;
|
|
} else if ((entry & 0x0fffffffffffffffULL) == seed) {
|
|
pr_debug("Found entry in CAM\n");
|
|
idx = i;
|
|
break;
|
|
}
|
|
}
|
|
return idx;
|
|
}
|
|
|
|
static int rtl83xx_port_fdb_add(struct dsa_switch *ds, int port,
|
|
const unsigned char *addr, u16 vid)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
u64 mac = ether_addr_to_u64(addr);
|
|
struct rtl838x_l2_entry e;
|
|
int err = 0, idx;
|
|
u64 seed = priv->r->l2_hash_seed(mac, vid);
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
idx = rtl83xx_find_l2_hash_entry(priv, seed, false, &e);
|
|
|
|
// Found an existing or empty entry
|
|
if (idx >= 0) {
|
|
rtl83xx_setup_l2_uc_entry(&e, port, vid, mac);
|
|
priv->r->write_l2_entry_using_hash(idx >> 2, idx & 0x3, &e);
|
|
goto out;
|
|
}
|
|
|
|
// Hash buckets full, try CAM
|
|
rtl83xx_find_l2_cam_entry(priv, seed, false, &e);
|
|
|
|
if (idx >= 0) {
|
|
rtl83xx_setup_l2_uc_entry(&e, port, vid, mac);
|
|
priv->r->write_cam(idx, &e);
|
|
goto out;
|
|
}
|
|
|
|
err = -ENOTSUPP;
|
|
out:
|
|
mutex_unlock(&priv->reg_mutex);
|
|
return err;
|
|
}
|
|
|
|
static int rtl83xx_port_fdb_del(struct dsa_switch *ds, int port,
|
|
const unsigned char *addr, u16 vid)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
u64 mac = ether_addr_to_u64(addr);
|
|
struct rtl838x_l2_entry e;
|
|
int err = 0, idx;
|
|
u64 seed = priv->r->l2_hash_seed(mac, vid);
|
|
|
|
pr_info("In %s, mac %llx, vid: %d\n", __func__, mac, vid);
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
idx = rtl83xx_find_l2_hash_entry(priv, seed, true, &e);
|
|
|
|
pr_info("Found entry index %d, key %d and bucket %d\n", idx, idx >> 2, idx & 3);
|
|
if (idx >= 0) {
|
|
e.valid = false;
|
|
dump_l2_entry(&e);
|
|
priv->r->write_l2_entry_using_hash(idx >> 2, idx & 0x3, &e);
|
|
goto out;
|
|
}
|
|
|
|
/* Check CAM for spillover from hash buckets */
|
|
rtl83xx_find_l2_cam_entry(priv, seed, true, &e);
|
|
|
|
if (idx >= 0) {
|
|
e.valid = false;
|
|
priv->r->write_cam(idx, &e);
|
|
goto out;
|
|
}
|
|
err = -ENOENT;
|
|
out:
|
|
mutex_unlock(&priv->reg_mutex);
|
|
return err;
|
|
}
|
|
|
|
static int rtl83xx_port_fdb_dump(struct dsa_switch *ds, int port,
|
|
dsa_fdb_dump_cb_t *cb, void *data)
|
|
{
|
|
struct rtl838x_l2_entry e;
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
int i;
|
|
u32 fid, pkey;
|
|
u64 mac;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
for (i = 0; i < priv->fib_entries; i++) {
|
|
priv->r->read_l2_entry_using_hash(i >> 2, i & 0x3, &e);
|
|
|
|
if (!e.valid)
|
|
continue;
|
|
|
|
if (e.port == port || e.port == RTL930X_PORT_IGNORE) {
|
|
u64 seed;
|
|
u32 key;
|
|
|
|
fid = ((i >> 2) & 0x3ff) | (e.rvid & ~0x3ff);
|
|
mac = ether_addr_to_u64(&e.mac[0]);
|
|
pkey = priv->r->l2_hash_key(priv, priv->r->l2_hash_seed(mac, fid));
|
|
fid = (pkey & 0x3ff) | (fid & ~0x3ff);
|
|
pr_info("-> index %d, key %x, bucket %d, dmac %016llx, fid: %x rvid: %x\n",
|
|
i, i >> 2, i & 0x3, mac, fid, e.rvid);
|
|
dump_l2_entry(&e);
|
|
seed = priv->r->l2_hash_seed(mac, e.rvid);
|
|
key = priv->r->l2_hash_key(priv, seed);
|
|
pr_info("seed: %016llx, key based on rvid: %08x\n", seed, key);
|
|
cb(e.mac, e.vid, e.is_static, data);
|
|
}
|
|
if (e.type == L2_MULTICAST) {
|
|
u64 portmask = priv->r->read_mcast_pmask(e.mc_portmask_index);
|
|
|
|
if (portmask & BIT_ULL(port)) {
|
|
dump_l2_entry(&e);
|
|
pr_info(" PM: %016llx\n", portmask);
|
|
}
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < 64; i++) {
|
|
priv->r->read_cam(i, &e);
|
|
|
|
if (!e.valid)
|
|
continue;
|
|
|
|
if (e.port == port)
|
|
cb(e.mac, e.vid, e.is_static, data);
|
|
}
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
return 0;
|
|
}
|
|
|
|
static int rtl83xx_port_mdb_prepare(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_mdb *mdb)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
|
|
if (priv->id >= 0x9300)
|
|
return -EOPNOTSUPP;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl83xx_mc_group_alloc(struct rtl838x_switch_priv *priv, int port)
|
|
{
|
|
int mc_group = find_first_zero_bit(priv->mc_group_bm, MAX_MC_GROUPS - 1);
|
|
u64 portmask;
|
|
|
|
if (mc_group >= MAX_MC_GROUPS - 1)
|
|
return -1;
|
|
|
|
pr_debug("Using MC group %d\n", mc_group);
|
|
set_bit(mc_group, priv->mc_group_bm);
|
|
mc_group++; // We cannot use group 0, as this is used for lookup miss flooding
|
|
portmask = BIT_ULL(port);
|
|
priv->r->write_mcast_pmask(mc_group, portmask);
|
|
|
|
return mc_group;
|
|
}
|
|
|
|
static u64 rtl83xx_mc_group_add_port(struct rtl838x_switch_priv *priv, int mc_group, int port)
|
|
{
|
|
u64 portmask = priv->r->read_mcast_pmask(mc_group);
|
|
|
|
portmask |= BIT_ULL(port);
|
|
priv->r->write_mcast_pmask(mc_group, portmask);
|
|
|
|
return portmask;
|
|
}
|
|
|
|
static u64 rtl83xx_mc_group_del_port(struct rtl838x_switch_priv *priv, int mc_group, int port)
|
|
{
|
|
u64 portmask = priv->r->read_mcast_pmask(mc_group);
|
|
|
|
portmask &= ~BIT_ULL(port);
|
|
priv->r->write_mcast_pmask(mc_group, portmask);
|
|
if (!portmask)
|
|
clear_bit(mc_group, priv->mc_group_bm);
|
|
|
|
return portmask;
|
|
}
|
|
|
|
static void rtl83xx_port_mdb_add(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_mdb *mdb)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
u64 mac = ether_addr_to_u64(mdb->addr);
|
|
struct rtl838x_l2_entry e;
|
|
int err = 0, idx;
|
|
int vid = mdb->vid;
|
|
u64 seed = priv->r->l2_hash_seed(mac, vid);
|
|
int mc_group;
|
|
|
|
pr_debug("In %s port %d, mac %llx, vid: %d\n", __func__, port, mac, vid);
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
idx = rtl83xx_find_l2_hash_entry(priv, seed, false, &e);
|
|
|
|
// Found an existing or empty entry
|
|
if (idx >= 0) {
|
|
if (e.valid) {
|
|
pr_debug("Found an existing entry %016llx, mc_group %d\n",
|
|
ether_addr_to_u64(e.mac), e.mc_portmask_index);
|
|
rtl83xx_mc_group_add_port(priv, e.mc_portmask_index, port);
|
|
} else {
|
|
pr_debug("New entry for seed %016llx\n", seed);
|
|
mc_group = rtl83xx_mc_group_alloc(priv, port);
|
|
if (mc_group < 0) {
|
|
err = -ENOTSUPP;
|
|
goto out;
|
|
}
|
|
rtl83xx_setup_l2_mc_entry(priv, &e, vid, mac, mc_group);
|
|
priv->r->write_l2_entry_using_hash(idx >> 2, idx & 0x3, &e);
|
|
}
|
|
goto out;
|
|
}
|
|
|
|
// Hash buckets full, try CAM
|
|
rtl83xx_find_l2_cam_entry(priv, seed, false, &e);
|
|
|
|
if (idx >= 0) {
|
|
if (e.valid) {
|
|
pr_debug("Found existing CAM entry %016llx, mc_group %d\n",
|
|
ether_addr_to_u64(e.mac), e.mc_portmask_index);
|
|
rtl83xx_mc_group_add_port(priv, e.mc_portmask_index, port);
|
|
} else {
|
|
pr_debug("New entry\n");
|
|
mc_group = rtl83xx_mc_group_alloc(priv, port);
|
|
if (mc_group < 0) {
|
|
err = -ENOTSUPP;
|
|
goto out;
|
|
}
|
|
rtl83xx_setup_l2_mc_entry(priv, &e, vid, mac, mc_group);
|
|
priv->r->write_cam(idx, &e);
|
|
}
|
|
goto out;
|
|
}
|
|
|
|
err = -ENOTSUPP;
|
|
out:
|
|
mutex_unlock(&priv->reg_mutex);
|
|
if (err)
|
|
dev_err(ds->dev, "failed to add MDB entry\n");
|
|
}
|
|
|
|
int rtl83xx_port_mdb_del(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_mdb *mdb)
|
|
{
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
u64 mac = ether_addr_to_u64(mdb->addr);
|
|
struct rtl838x_l2_entry e;
|
|
int err = 0, idx;
|
|
int vid = mdb->vid;
|
|
u64 seed = priv->r->l2_hash_seed(mac, vid);
|
|
u64 portmask;
|
|
|
|
pr_debug("In %s, port %d, mac %llx, vid: %d\n", __func__, port, mac, vid);
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
idx = rtl83xx_find_l2_hash_entry(priv, seed, true, &e);
|
|
|
|
pr_debug("Found entry index %d, key %d and bucket %d\n", idx, idx >> 2, idx & 3);
|
|
if (idx >= 0) {
|
|
portmask = rtl83xx_mc_group_del_port(priv, e.mc_portmask_index, port);
|
|
if (!portmask) {
|
|
e.valid = false;
|
|
// dump_l2_entry(&e);
|
|
priv->r->write_l2_entry_using_hash(idx >> 2, idx & 0x3, &e);
|
|
}
|
|
goto out;
|
|
}
|
|
|
|
/* Check CAM for spillover from hash buckets */
|
|
rtl83xx_find_l2_cam_entry(priv, seed, true, &e);
|
|
|
|
if (idx >= 0) {
|
|
portmask = rtl83xx_mc_group_del_port(priv, e.mc_portmask_index, port);
|
|
if (!portmask) {
|
|
e.valid = false;
|
|
// dump_l2_entry(&e);
|
|
priv->r->write_cam(idx, &e);
|
|
}
|
|
goto out;
|
|
}
|
|
// TODO: Re-enable with a newer kernel: err = -ENOENT;
|
|
out:
|
|
mutex_unlock(&priv->reg_mutex);
|
|
return err;
|
|
}
|
|
|
|
static int rtl83xx_port_mirror_add(struct dsa_switch *ds, int port,
|
|
struct dsa_mall_mirror_tc_entry *mirror,
|
|
bool ingress)
|
|
{
|
|
/* We support 4 mirror groups, one destination port per group */
|
|
int group;
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
int ctrl_reg, dpm_reg, spm_reg;
|
|
|
|
pr_debug("In %s\n", __func__);
|
|
|
|
for (group = 0; group < 4; group++) {
|
|
if (priv->mirror_group_ports[group] == mirror->to_local_port)
|
|
break;
|
|
}
|
|
if (group >= 4) {
|
|
for (group = 0; group < 4; group++) {
|
|
if (priv->mirror_group_ports[group] < 0)
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (group >= 4)
|
|
return -ENOSPC;
|
|
|
|
ctrl_reg = priv->r->mir_ctrl + group * 4;
|
|
dpm_reg = priv->r->mir_dpm + group * 4 * priv->port_width;
|
|
spm_reg = priv->r->mir_spm + group * 4 * priv->port_width;
|
|
|
|
pr_debug("Using group %d\n", group);
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
if (priv->family_id == RTL8380_FAMILY_ID) {
|
|
/* Enable mirroring to port across VLANs (bit 11) */
|
|
sw_w32(1 << 11 | (mirror->to_local_port << 4) | 1, ctrl_reg);
|
|
} else {
|
|
/* Enable mirroring to destination port */
|
|
sw_w32((mirror->to_local_port << 4) | 1, ctrl_reg);
|
|
}
|
|
|
|
if (ingress && (priv->r->get_port_reg_be(spm_reg) & (1ULL << port))) {
|
|
mutex_unlock(&priv->reg_mutex);
|
|
return -EEXIST;
|
|
}
|
|
if ((!ingress) && (priv->r->get_port_reg_be(dpm_reg) & (1ULL << port))) {
|
|
mutex_unlock(&priv->reg_mutex);
|
|
return -EEXIST;
|
|
}
|
|
|
|
if (ingress)
|
|
priv->r->mask_port_reg_be(0, 1ULL << port, spm_reg);
|
|
else
|
|
priv->r->mask_port_reg_be(0, 1ULL << port, dpm_reg);
|
|
|
|
priv->mirror_group_ports[group] = mirror->to_local_port;
|
|
mutex_unlock(&priv->reg_mutex);
|
|
return 0;
|
|
}
|
|
|
|
static void rtl83xx_port_mirror_del(struct dsa_switch *ds, int port,
|
|
struct dsa_mall_mirror_tc_entry *mirror)
|
|
{
|
|
int group = 0;
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
int ctrl_reg, dpm_reg, spm_reg;
|
|
|
|
pr_debug("In %s\n", __func__);
|
|
for (group = 0; group < 4; group++) {
|
|
if (priv->mirror_group_ports[group] == mirror->to_local_port)
|
|
break;
|
|
}
|
|
if (group >= 4)
|
|
return;
|
|
|
|
ctrl_reg = priv->r->mir_ctrl + group * 4;
|
|
dpm_reg = priv->r->mir_dpm + group * 4 * priv->port_width;
|
|
spm_reg = priv->r->mir_spm + group * 4 * priv->port_width;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
if (mirror->ingress) {
|
|
/* Ingress, clear source port matrix */
|
|
priv->r->mask_port_reg_be(1ULL << port, 0, spm_reg);
|
|
} else {
|
|
/* Egress, clear destination port matrix */
|
|
priv->r->mask_port_reg_be(1ULL << port, 0, dpm_reg);
|
|
}
|
|
|
|
if (!(sw_r32(spm_reg) || sw_r32(dpm_reg))) {
|
|
priv->mirror_group_ports[group] = -1;
|
|
sw_w32(0, ctrl_reg);
|
|
}
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
}
|
|
|
|
int dsa_phy_read(struct dsa_switch *ds, int phy_addr, int phy_reg)
|
|
{
|
|
u32 val;
|
|
u32 offset = 0;
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
|
|
if (phy_addr >= 24 && phy_addr <= 27
|
|
&& priv->ports[24].phy == PHY_RTL838X_SDS) {
|
|
if (phy_addr == 26)
|
|
offset = 0x100;
|
|
val = sw_r32(RTL838X_SDS4_FIB_REG0 + offset + (phy_reg << 2)) & 0xffff;
|
|
return val;
|
|
}
|
|
|
|
read_phy(phy_addr, 0, phy_reg, &val);
|
|
return val;
|
|
}
|
|
|
|
int dsa_phy_write(struct dsa_switch *ds, int phy_addr, int phy_reg, u16 val)
|
|
{
|
|
u32 offset = 0;
|
|
struct rtl838x_switch_priv *priv = ds->priv;
|
|
|
|
if (phy_addr >= 24 && phy_addr <= 27
|
|
&& priv->ports[24].phy == PHY_RTL838X_SDS) {
|
|
if (phy_addr == 26)
|
|
offset = 0x100;
|
|
sw_w32(val, RTL838X_SDS4_FIB_REG0 + offset + (phy_reg << 2));
|
|
return 0;
|
|
}
|
|
return write_phy(phy_addr, 0, phy_reg, val);
|
|
}
|
|
|
|
const struct dsa_switch_ops rtl83xx_switch_ops = {
|
|
.get_tag_protocol = rtl83xx_get_tag_protocol,
|
|
.setup = rtl83xx_setup,
|
|
|
|
.phy_read = dsa_phy_read,
|
|
.phy_write = dsa_phy_write,
|
|
|
|
.phylink_validate = rtl83xx_phylink_validate,
|
|
.phylink_mac_link_state = rtl83xx_phylink_mac_link_state,
|
|
.phylink_mac_config = rtl83xx_phylink_mac_config,
|
|
.phylink_mac_link_down = rtl83xx_phylink_mac_link_down,
|
|
.phylink_mac_link_up = rtl83xx_phylink_mac_link_up,
|
|
|
|
.get_strings = rtl83xx_get_strings,
|
|
.get_ethtool_stats = rtl83xx_get_ethtool_stats,
|
|
.get_sset_count = rtl83xx_get_sset_count,
|
|
|
|
.port_enable = rtl83xx_port_enable,
|
|
.port_disable = rtl83xx_port_disable,
|
|
|
|
.get_mac_eee = rtl83xx_get_mac_eee,
|
|
.set_mac_eee = rtl83xx_set_mac_eee,
|
|
|
|
.set_ageing_time = rtl83xx_set_l2aging,
|
|
.port_bridge_join = rtl83xx_port_bridge_join,
|
|
.port_bridge_leave = rtl83xx_port_bridge_leave,
|
|
.port_stp_state_set = rtl83xx_port_stp_state_set,
|
|
.port_fast_age = rtl83xx_fast_age,
|
|
|
|
.port_vlan_filtering = rtl83xx_vlan_filtering,
|
|
.port_vlan_prepare = rtl83xx_vlan_prepare,
|
|
.port_vlan_add = rtl83xx_vlan_add,
|
|
.port_vlan_del = rtl83xx_vlan_del,
|
|
|
|
.port_fdb_add = rtl83xx_port_fdb_add,
|
|
.port_fdb_del = rtl83xx_port_fdb_del,
|
|
.port_fdb_dump = rtl83xx_port_fdb_dump,
|
|
|
|
.port_mdb_prepare = rtl83xx_port_mdb_prepare,
|
|
.port_mdb_add = rtl83xx_port_mdb_add,
|
|
.port_mdb_del = rtl83xx_port_mdb_del,
|
|
|
|
.port_mirror_add = rtl83xx_port_mirror_add,
|
|
.port_mirror_del = rtl83xx_port_mirror_del,
|
|
};
|
|
|
|
const struct dsa_switch_ops rtl930x_switch_ops = {
|
|
.get_tag_protocol = rtl83xx_get_tag_protocol,
|
|
.setup = rtl930x_setup,
|
|
|
|
.phy_read = dsa_phy_read,
|
|
.phy_write = dsa_phy_write,
|
|
|
|
.phylink_validate = rtl93xx_phylink_validate,
|
|
.phylink_mac_link_state = rtl93xx_phylink_mac_link_state,
|
|
.phylink_mac_config = rtl93xx_phylink_mac_config,
|
|
.phylink_mac_link_down = rtl93xx_phylink_mac_link_down,
|
|
.phylink_mac_link_up = rtl93xx_phylink_mac_link_up,
|
|
|
|
.get_strings = rtl83xx_get_strings,
|
|
.get_ethtool_stats = rtl83xx_get_ethtool_stats,
|
|
.get_sset_count = rtl83xx_get_sset_count,
|
|
|
|
.port_enable = rtl83xx_port_enable,
|
|
.port_disable = rtl83xx_port_disable,
|
|
|
|
.get_mac_eee = rtl93xx_get_mac_eee,
|
|
.set_mac_eee = rtl83xx_set_mac_eee,
|
|
|
|
.set_ageing_time = rtl83xx_set_l2aging,
|
|
.port_bridge_join = rtl83xx_port_bridge_join,
|
|
.port_bridge_leave = rtl83xx_port_bridge_leave,
|
|
.port_stp_state_set = rtl83xx_port_stp_state_set,
|
|
.port_fast_age = rtl930x_fast_age,
|
|
|
|
.port_vlan_filtering = rtl83xx_vlan_filtering,
|
|
.port_vlan_prepare = rtl83xx_vlan_prepare,
|
|
.port_vlan_add = rtl83xx_vlan_add,
|
|
.port_vlan_del = rtl83xx_vlan_del,
|
|
|
|
.port_fdb_add = rtl83xx_port_fdb_add,
|
|
.port_fdb_del = rtl83xx_port_fdb_del,
|
|
.port_fdb_dump = rtl83xx_port_fdb_dump,
|
|
|
|
.port_mdb_prepare = rtl83xx_port_mdb_prepare,
|
|
.port_mdb_add = rtl83xx_port_mdb_add,
|
|
.port_mdb_del = rtl83xx_port_mdb_del,
|
|
|
|
};
|