Difuse/difos
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
difos/package/boot/uboot-envtools/files
History
Pawel Dembicki 67ce9aedd6 kirkwood: add support for Check Point L-50 
This patch adds support for the Check Point L-50 from 600/1100 series
routers.

Specification:
-CPU: Marvell Kirkwood 88F6281 1200MHz
-RAM: 512MB
-Flash: NAND 512MB
-WiFi: mPCIe card based on Atheros AR9287 b/g/n
-WAN: 1 Gigabit Port (Marvell 88E1116R PHY)
-LAN: 9 Gigabit Ports (2x Marvell 88E6171(5+4))
-USB: 2x USB2.0
-Express card slot
-SD card slot
-Serial console: RJ-45 115200 8n1
-Unsupported DSL

Known issues:
-DSL not supported
-Expresscard not tested

Installation:

Step one -> backup:
make backup u-boot and env for revert stock posibility
make backup dsl_mac_addr, dmz_mac_addr, eth1addr, ethaddr and all lanX_mac_addr

Step two -> Use kwboot tool to upload openwrt u-boot to RAM:

run kwboot: "kwboot -B 115200 /dev/ttyUSB0 -b u-boot.kwb -p -t"
end start u-boot

Step three -> Restore macs (e.g. below):
setenv eth1addr 00:1C:XX:XX:XX:6C
setenv ethaddr 00:1C:XX:XX:XX:6B
setenv lan1_mac_addr 00:1C:XX:XX:XX:6C
setenv lan2_mac_addr 00:1C:XX:XX:XX:6D
setenv lan3_mac_addr 00:1C:XX:XX:XX:6E
setenv lan4_mac_addr 00:1C:XX:XX:XX:6F
setenv lan5_mac_addr 00:1C:XX:XX:XX:70
setenv lan6_mac_addr 00:1C:XX:XX:XX:71
setenv lan7_mac_addr 00:1C:XX:XX:XX:72
setenv lan8_mac_addr 00:1C:XX:XX:XX:73
setenv dmz_mac_addr 00:1C:XX:XX:XX:74
setenv dsl_mac_addr 00:1C:XX:XX:XX:75

Step four -> flash u-boot:
mw 0x0800000 0xffff 0x100000
nand erase 0x0 100000
tftp 0x0800000 openwrt-kirkwood-l50-u-boot.kwb
nand write 0x0800000 0x0 0x100000
saveenv

Step five -> run initramfs image:

tftpboot 0x02000000 openwrt.bin; bootm 0x02000000;

Step six -> install sysupgrade OpenWrt image:

copy to /tmp/ sysupgrade image
run sysupgrade

Back to stock:
Restore original u-boot end env.
Install factory image via stock u-boot.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-07-11 13:33:28 +02:00
..
apm821xx apm821xx: add support for the Netgear WNDAP620 and WNDAP660 2018-11-26 12:05:46 +01:00
ar71xx uboot-envtools: ar71xx: add support for gl-ar150/-domino/-mifi 2020-01-23 14:04:50 +01:00
ath79 uboot-envtools: ath79: update ubootenv partion index for gl-ar300m 2020-07-11 13:33:28 +02:00
cns3xxx treewide: use the generic board_name function 2017-07-15 23:13:34 +02:00
imx6 uboot-envtools: remove erasesize from MMC config 2019-10-21 12:28:03 +02:00
ipq40xx ipq40xx: add support for Buffalo WTR-M2133HP 2020-07-08 16:07:05 +02:00
ipq806x ipq806x: add support for Linksys EA7500 V1 2020-07-08 16:07:05 +02:00
kirkwood kirkwood: add support for Check Point L-50 2020-07-11 13:33:28 +02:00
lantiq lantiq: use the compatible string as board name 2017-12-16 23:33:56 +01:00
layerscape uboot-envtools: add configuration for Traverse LS1043 boards. 2018-07-30 10:53:57 +02:00
mpc85xx mpc85xx: add support for OCEDO Panda 2019-01-26 17:10:19 +01:00
mvebu mvebu: rename Linksys devices based on their common names 2020-06-05 21:54:43 +02:00
mxs uboot-envtools: mxs: add support for olimex, imx23-olinuxino 2020-03-08 15:10:55 +01:00
oxnas uboot-envtools: fix fw_env.config for ox820/stg-212 2019-04-11 19:21:55 +02:00
pistachio pistachio: remove custom board detection override 2017-03-22 11:43:22 +01:00
ramips ramips: Add support for Xiaomi Mi Router(Black,R2100) 2020-07-08 16:07:05 +02:00
uboot-envtools.sh uboot-envtools: check for config prior to append 2019-12-17 19:35:16 +02:00