620f9c7734
This submission relied heavily on the work of
Santiago Rodriguez-Papa <contact at rodsan.dev>
Specifications:
* SoC: MediaTek MT7621A (880 MHz 2c/4t)
* RAM: Winbond W632GG6MB-12 (256M DDR3-1600)
* Flash: Winbond W29N01HVSINA (128M NAND)
* Eth: MediaTek MT7621A (10/100/1000 Mbps x5)
* Radio: MT7603E/MT7615N (2.4 GHz & 5 GHz)
4 antennae: 1 internal and 3 non-deatachable
* USB: 3.0 (x1)
* LEDs:
White (x1 logo)
Green (x6 eth + wps)
Orange (x5, hardware-bound)
* Buttons:
Reset (x1)
WPS (x1)
Installation:
Flash factory image through GUI.
This might fail due to the A/B nature of this device. When flashing, OEM
firmware writes over the non-booted partition. If booted from 'A',
flashing over 'B' won't work. To get around this, you should flash the
OEM image over itself. This will then boot the router from 'B' and
allow you to flash OpenWRT without problems.
Reverting to factory firmware:
Hard-reset the router three times to force it to boot from 'B.' This is
where the stock firmware resides. To remove any traces of OpenWRT from
your router simply flash the OEM image at this point.
Signed-off-by: J. Scott Heppler <shep971@centurylink.net>
92 lines
2.1 KiB
Bash
Executable file
92 lines
2.1 KiB
Bash
Executable file
#
|
|
# Copyright (C) 2010 OpenWrt.org
|
|
#
|
|
|
|
PART_NAME=firmware
|
|
REQUIRE_IMAGE_METADATA=1
|
|
|
|
RAMFS_COPY_BIN='fw_printenv fw_setenv'
|
|
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
|
|
|
platform_check_image() {
|
|
return 0
|
|
}
|
|
|
|
platform_do_upgrade() {
|
|
local board=$(board_name)
|
|
|
|
case "$board" in
|
|
alfa-network,quad-e4g)
|
|
[ "$(fw_printenv -n dual_image 2>/dev/null)" = "1" ] &&\
|
|
[ -n "$(find_mtd_part backup)" ] && {
|
|
PART_NAME=backup
|
|
if [ "$(fw_printenv -n bootactive 2>/dev/null)" = "1" ]; then
|
|
fw_setenv bootactive 2 || exit 1
|
|
else
|
|
fw_setenv bootactive 1 || exit 1
|
|
fi
|
|
}
|
|
;;
|
|
mikrotik,routerboard-750gr3|\
|
|
mikrotik,routerboard-760igs|\
|
|
mikrotik,routerboard-m11g|\
|
|
mikrotik,routerboard-m33g)
|
|
[ -z "$(rootfs_type)" ] && mtd erase firmware
|
|
;;
|
|
asus,rt-ac65p|\
|
|
asus,rt-ac85p)
|
|
echo "Backing up firmware"
|
|
dd if=/dev/mtd4 bs=1024 count=4096 > /tmp/backup_firmware.bin
|
|
dd if=/dev/mtd5 bs=1024 count=52224 >> /tmp/backup_firmware.bin
|
|
mtd -e firmware2 write /tmp/backup_firmware.bin firmware2
|
|
;;
|
|
esac
|
|
|
|
case "$board" in
|
|
asus,rt-ac65p|\
|
|
asus,rt-ac85p|\
|
|
dlink,dir-1960-a1|\
|
|
dlink,dir-2660-a1|\
|
|
hiwifi,hc5962|\
|
|
linksys,ea7300-v1|\
|
|
linksys,ea7300-v2|\
|
|
linksys,ea7500-v2|\
|
|
netgear,r6220|\
|
|
netgear,r6260|\
|
|
netgear,r6350|\
|
|
netgear,r6700-v2|\
|
|
netgear,r6800|\
|
|
netgear,r6850|\
|
|
netgear,wac104|\
|
|
netgear,wac124|\
|
|
netis,wf2881|\
|
|
xiaomi,mi-router-ac2100|\
|
|
xiaomi,mir3g|\
|
|
xiaomi,mir3p|\
|
|
xiaomi,redmi-router-ac2100)
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
iodata,wn-ax1167gr2|\
|
|
iodata,wn-ax2033gr|\
|
|
iodata,wn-dx1167r)
|
|
iodata_mstc_upgrade_prepare
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
ubnt,edgerouter-x|\
|
|
ubnt,edgerouter-x-sfp)
|
|
platform_upgrade_ubnt_erx "$1"
|
|
;;
|
|
zyxel,wap6805)
|
|
local kernel2_mtd="$(find_mtd_part Kernel2)"
|
|
[ "$(hexdump -n 4 -e '"%x"' $kernel2_mtd)" = "56190527" ] &&\
|
|
[ "$(hexdump -n 4 -s 104 -e '"%x"' $kernel2_mtd)" != "0" ] &&\
|
|
dd bs=4 count=1 seek=26 conv=notrunc if=/dev/zero of=$kernel2_mtd 2>/dev/null &&\
|
|
echo "Kernel2 sequence number was reset to 0"
|
|
CI_KERNPART="Kernel"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
*)
|
|
default_do_upgrade "$1"
|
|
;;
|
|
esac
|
|
}
|