Difuse/difos
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
difos/target/linux/bcm63xx/base-files/etc/board.d/02_network
Daniele Castro 59c2f9eaad bcm63xx: add support for Technicolor TG582n 
Technicolor TG582n has a similar PCB as the OpenWrt's ADB P.DG A4001N1
with LEDs connected to different GPIO PINs in active low configuration.

Hardware:
* Board ID: DANT-1
* SoC: Broadcom BCM6328 (rev b0) @ 320MHz, CPU BMIPS4350
* RAM DDR2: 64 Mbyte - Winbond W9751G6KB-25
* Serial flash: 16 Mbyte - MXIC MX25L6445EMI
* Ethernet: 4x Ethernet 10/100 baseT
* Wifi 2.4GHz: Broadcom Corporation BCM43227 Wireless Network Adapter (rev 30)
* LEDs: 2x Power, 1x Ethernet, 1x Broadband, 2x Wi-Fi, 2x WPS, 4x ethernet
* Buttons: 1x Reset, 1x WPS, 1x WiFi
* UART: 1x TTL 115200n8, VCC GND TX RX, on J3 connector (short R62 and R63)

Installation via CFE:
* Stock CFE has to be overwritten with a generic 6328 one that can upload
  .bin images with no signature check (cfe6328_configured.bin)
* Connect a serial port to the board
* Stop the CFE boot process after power on by pressing enter
* Set static IP 192.168.2.10 and subnet mask 255.255.255.0
* Navigate to http://192.168.2.50/
* Upload the OpenWrt image file

PCB:   |GPIO:   |TG582n:

LED2R  |488(08) |red    Power
LED2G  |484(04) |green  Power

LED10R |486(06) |
LED13G |485(05) |green  Ethernet

LED11R |494(14) |
LED14G |491(11) |green  Broadband

LED5R  |487(07) |red    Internet
LED5G  |481(01) |green  Internet

LED12R |498(18) |
LED12G |499(19) |

LED6R  |482(02) |red    Wi-Fi
LED6G  |483(03) |green  Wi-Fi

LED7R  |490(10) |red    WPS
LED7G  |489(09) |green  WPS

LED4   |508(28) |ethernet port 4
LED3   |507(27) |ethernet port 3

LED9   |506(26) |ethernet port 2
LED8   |505(25) |ethernet port 1

SW3    |503(23) |key Reset

SW5    |504(24) |key WPS

SW4    |495(15) |key Wi-Fi

SW6    |493(13) |

SW1    |492(12) |

Signed-off-by: Daniele Castro <danielecastro@hotmail.it>
[Fix base-files, refresh patch]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-12-06 19:17:41 +01:00

169 lines
3.8 KiB
Bash
Executable file
Raw Blame History

#!/bin/sh
#
# Copyright (C) 2012-2015 OpenWrt.org
#
. /lib/functions/uci-defaults.sh
board_config_update
case "$(board_name)" in
actiontec,r1000h|\
dynalink,rta770bw|\
dynalink,rta770w|\
netgear,cvg834g|\
netgear,dgnd3700-v2|\
netgear,evg2000|\
t-com,speedport-w-303v|\
t-com,speedport-w-500v)
ucidef_set_interface_lan "eth0"
;;
adb,a4001n1|\
adb,a4001n|\
adb,pdg-a4001n-a-000-1a1-ax|\
adb,pdg-a4101n-a-000-1a1-ae|\
adb,av4202n|\
brcm,bcm963281tan|\
brcm,bcm96328avng|\
brcm,bcm96368mvngr|\
comtrend,ar-5381u|\
comtrend,ar-5387un|\
comtrend,vr-3025u|\
comtrend,vr-3025un|\
comtrend,vr-3026e|\
d-link,dsl-274xb-f1|\
d-link,dsl-2750u-c1|\
d-link,dsl-275xb-d1|\
huawei,echolife-hg622|\
huawei,echolife-hg655b|\
nucom,r5010un-v2|\
sagem,fast-2504n|\
sagem,fast-2704-v2|\
technicolor,tg582n|\
technicolor,tg582n-telecom-italia|\
zyxel,p870hw-51a-v2)
ucidef_add_switch "switch0" \
"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "8t@eth0"
;;
alcatel,rg100a|\
belkin,f5d7633|\
brcm,bcm96348gw|\
brcm,bcm96348gw-10|\
brcm,bcm96348gw-11|\
brcm,bcm96358vw|\
brcm,bcm96358vw2|\
bt,voyager-2500v-bb|\
davolink,dv-201amr|\
d-link,dsl-2650u|\
dynalink,rta1025w|\
netgear,dg834gt-pn|\
pirelli,agpf-s0|\
sagem,fast-2404|\
telsey,magic|\
tp-link,td-w8900gb|\
usrobotics,usr9108)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth1"
;;
asmax,ar-1004g|\
brcm,bcm96338gw|\
brcm,bcm96338w|\
bt,voyager-2110|\
comtrend,ct-5365|\
comtrend,ct-536plus|\
comtrend,ct-6373|\
d-link,dsl-2640b-b|\
d-link,dsl-2640u|\
dynalink,rta1320|\
netgear,dg834g-v4|\
sagem,fast-2604|\
telsey,cpva642)
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth0"
;;
brcm,bcm963268bu-p300)
ucidef_add_switch "switch0" \
"0:lan" "3:lan" "4:lan" "5:lan" "6:lan" "7:lan" "8t@eth0"
;;
brcm,bcm96368mvwg)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "4:lan" "5:lan" "8t@eth0"
;;
bt,home-hub-2-a|\
d-link,dsl-274xb-c2|\
huawei,echolife-hg553|\
huawei,echolife-hg556a-a|\
huawei,echolife-hg556a-b|\
huawei,echolife-hg556a-c)
ucidef_add_switch "switch0" \
"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "5t@eth0"
;;
comtrend,ar-5315u|\
observa,vh4032n|\
sagem,fast-2704n)
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "8t@eth0"
;;
comtrend,vg-8050)
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "8t@eth0"
;;
comtrend,vr-3032u)
ucidef_add_switch "switch0" \
"0:lan:2" "1:lan:3" "2:lan:4" "3:lan:1" "8t@eth0"
;;
comtrend,wap-5813n)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@eth0"
;;
d-link,dva-g3810bn-tl|\
huawei,echolife-hg520v|\
sfr,neufbox-4-foxconn-r1|\
sfr,neufbox-4-sercomm-r0)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth1"
;;
huawei,hg253s-v2)
ucidef_add_switch "switch0" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "8t@eth0"
;;
inteno,vg50)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8t@eth0"
;;
inventel,livebox-1|\
telsey,cpva502plus)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
netgear,dgnd3700-v1)
ucidef_add_switch "switch0" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "8t@eth0"
;;
sercomm,ad1018|\
sercomm,ad1018-nor)
ucidef_add_switch "switch0" \
"1:lan:3" "2:lan:2" "3:lan:1" "0:wan" "8t@eth0"
;;
sercomm,h500-s-lowi|\
sercomm,h500-s-vfes)
ucidef_add_switch "switch0" "4:lan" "3:wan" "8t@eth0"
;;
sfr,neufbox-6-sercomm-r0)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9t@eth0"
;;
sky,sr102)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:wan" "8t@eth0"
;;
*)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
esac
board_config_flush
exit 0
Reference in a new issue View git blame Copy permalink