Difuse/difos
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
The underlying operating system for DifuseHQ's embedded routing devices
38998 commits 4 branches 19 tags 833 MiB
C 64%
Makefile 18.8%
Shell 6.6%
Roff 4.9%
Perl 2.6%
Other 3%
Find a file
Thomas Nixon 50e3659703 lantiq: add Netgear DM200 support 
Netgear DM200 is an inexpensive VDSL modem:

    CPU: VRX220 MIPS 34Kc 5.6 @ 500Mhz
    RAM: 64MiB
    Flash: 8MiB
    Ethernet: 1x100M
    DSL: VDSL2+, ADSL2+
    reset button, 3x bi-color LEDs

Serial port is 115200 baud, on the 4 pin header; pins from the bottom to
top are GND, RX, TX.

To upgrade from the vendor firmware, upload factory.img

The DM200 bootloader supports flashing over TFTP; hold the reset button
while powering on the device, and wait for the power light to start
flashing green before releasing. The device is now listening on
192.168.0.1/24, and can be sent a factory.img or a netgear image with a
TFTP put.

Once the image is loaded, it will be written to the flash, and the
device will reboot; this will take a few minutes.

Thanks to Edward O'Callaghan and Baptiste Jonglez, who implemented their
own ports for this device and provided valuable feedback.

Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
2017-07-07 07:13:24 +02:00
.github github: include pull request template 2017-03-12 17:38:31 +01:00
config build: enable gzipping of images on x86 even if ext4 is disabled 2017-07-06 11:30:33 +02:00
include build: move mktplinkfw2 related commands to image-commands.mk 2017-06-29 10:37:36 +02:00
package lantiq: set up DSL front-end GPIOs if they exist 2017-07-07 07:13:24 +02:00
scripts scripts/package-metadata.pl: parse and validate field Require-User 2017-06-18 10:39:35 +08:00
target lantiq: add Netgear DM200 support 2017-07-07 07:13:24 +02:00
toolchain gcc: gcc 6.3.0 fix comparison between pointer and integer 2017-06-24 13:11:19 +02:00
tools tools/flex: add autoreconf 2017-07-06 08:57:27 +02:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore gitignore: add /overlay 2017-01-15 18:16:29 +01:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in branding: add LEDE branding 2016-03-24 22:40:13 +01:00
feeds.conf.default Add video feed to feeds.conf.default 2017-01-25 16:04:39 +01:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile build: prepare config.seed before package compilation 2017-03-18 12:08:04 +01:00
README README: Update project README 2016-05-12 03:29:36 +02:00
rules.mk rules.mk: make PKG_CONFIG_DEPENDS properly track string values 2017-02-27 23:46:53 +01:00

README 

This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your LEDE Community
	http://www.lede-project.org