5031fbfd22
Combine fixed sizes of "kernel" and "rootfs" partitions into one partition managed by OpenWrt splitter, it will allow better management of chip capacity and less maintenance burden when compiled kernel image will outgrow allocated size for kernel partition. This also changes kernel image format, since splitter only manages kernel and rootfs partitions, the dtb needs to be updated with the kernel, so for convenience, kernel is packed to FIT image. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
291 lines
8.9 KiB
Makefile
291 lines
8.9 KiB
Makefile
#
|
|
# Copyright 2018 NXP
|
|
#
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
# See /LICENSE for more information.
|
|
#
|
|
|
|
define Device/Default
|
|
PROFILES := Default
|
|
IMAGES := firmware.bin
|
|
FILESYSTEMS := ubifs
|
|
MKUBIFS_OPTS := -m 1 -e 262016 -c 128
|
|
KERNEL := kernel-bin | gzip | uImage gzip
|
|
KERNEL_LOADADDR := 0x80080000
|
|
KERNEL_ENTRY_POINT := 0x80080000
|
|
endef
|
|
|
|
define Device/ls1012afrdm
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := FRDM-LS1012A
|
|
DEVICE_PACKAGES += \
|
|
layerscape-ppfe \
|
|
tfa-ls1012afrdm \
|
|
kmod-ppfe
|
|
DEVICE_DTS := freescale/fsl-ls1012a-frdm
|
|
BLOCKSIZE := 256KiB
|
|
FILESYSTEMS := squashfs
|
|
IMAGE/firmware.bin := \
|
|
ls-clean | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 10M | \
|
|
ls-append pfe.itb | pad-to 15M | \
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
append-kernel | pad-to $$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size 67108865
|
|
KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
KERNEL_INITRAMFS := kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
endef
|
|
TARGET_DEVICES += ls1012afrdm
|
|
|
|
define Device/ls1012ardb
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := LS1012A-RDB
|
|
DEVICE_PACKAGES += \
|
|
layerscape-ppfe \
|
|
tfa-ls1012ardb \
|
|
kmod-ppfe
|
|
DEVICE_DTS := freescale/fsl-ls1012a-rdb
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 256KiB
|
|
PAGESIZE := 1
|
|
IMAGE/firmware.bin := \
|
|
ls-clean | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 10M | \
|
|
ls-append pfe.itb | pad-to 15M | \
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
append-kernel | pad-to 32M | \
|
|
append-ubi | check-size 67108865
|
|
endef
|
|
TARGET_DEVICES += ls1012ardb
|
|
|
|
define Device/ls1012afrwy
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := FRWY-LS1012A
|
|
DEVICE_PACKAGES += \
|
|
layerscape-ppfe \
|
|
tfa-ls1012afrwy \
|
|
kmod-ppfe
|
|
DEVICE_DTS := freescale/fsl-ls1012a-frwy
|
|
FILESYSTEMS := ext4
|
|
IMAGES := firmware.bin sdcard.img
|
|
IMAGE/firmware.bin := \
|
|
ls-clean | \
|
|
ls-append $(1)-bl2.pbl | pad-to 128K | \
|
|
ls-append pfe.itb | pad-to 384K | \
|
|
ls-append $(1)-fip.bin | pad-to 1856K | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 2048K | \
|
|
check-size 2097153
|
|
IMAGE/sdcard.img := \
|
|
ls-clean | \
|
|
ls-append-sdhead $(1) | pad-to 15M | \
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
|
append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += ls1012afrwy
|
|
|
|
define Device/ls1043ardb
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := LS1043A-RDB
|
|
DEVICE_VARIANT := Default
|
|
DEVICE_PACKAGES += \
|
|
layerscape-fman-ls1043ardb \
|
|
tfa-ls1043ardb \
|
|
fmc fmc-eth-config
|
|
DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
|
|
FILESYSTEMS := squashfs
|
|
IMAGE/firmware.bin := \
|
|
ls-clean | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 9M | \
|
|
ls-append $(1)-fman.bin | pad-to 15M | \
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
append-kernel | pad-to 32M | \
|
|
append-rootfs | pad-rootfs | check-size 67108865
|
|
endef
|
|
TARGET_DEVICES += ls1043ardb
|
|
|
|
define Device/ls1043ardb-sdboot
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := LS1043A-RDB
|
|
DEVICE_VARIANT := SD Card Boot
|
|
DEVICE_PACKAGES += \
|
|
layerscape-fman-ls1043ardb \
|
|
tfa-ls1043ardb-sdboot \
|
|
fmc fmc-eth-config
|
|
DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
|
|
FILESYSTEMS := ext4
|
|
IMAGES := sdcard.img
|
|
IMAGE/sdcard.img := \
|
|
ls-clean | \
|
|
ls-append-sdhead $(1) | pad-to 4K | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 9M | \
|
|
ls-append ls1043ardb-fman.bin | pad-to 15M | \
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
|
append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += ls1043ardb-sdboot
|
|
|
|
define Device/ls1046ardb
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := LS1046A-RDB
|
|
DEVICE_VARIANT := Default
|
|
DEVICE_PACKAGES += \
|
|
layerscape-fman-ls1046ardb \
|
|
tfa-ls1046ardb \
|
|
fmc fmc-eth-config
|
|
DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 256KiB
|
|
PAGESIZE := 1
|
|
IMAGE/firmware.bin := \
|
|
ls-clean | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 9M | \
|
|
ls-append $(1)-fman.bin | pad-to 15M | \
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
append-kernel | pad-to 32M | \
|
|
append-ubi | check-size 67108865
|
|
endef
|
|
TARGET_DEVICES += ls1046ardb
|
|
|
|
define Device/ls1046ardb-sdboot
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := LS1046A-RDB
|
|
DEVICE_VARIANT := SD Card Boot
|
|
DEVICE_PACKAGES += \
|
|
layerscape-fman-ls1046ardb \
|
|
tfa-ls1046ardb-sdboot \
|
|
fmc fmc-eth-config
|
|
DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
|
|
FILESYSTEMS := ext4
|
|
IMAGES := sdcard.img
|
|
IMAGE/sdcard.img := \
|
|
ls-clean | \
|
|
ls-append-sdhead $(1) | pad-to 4K | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 9M | \
|
|
ls-append ls1046ardb-fman.bin | pad-to 15M | \
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
|
append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += ls1046ardb-sdboot
|
|
|
|
define Device/ls1088ardb
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := LS1088A-RDB
|
|
DEVICE_VARIANT := Default
|
|
DEVICE_PACKAGES += \
|
|
layerscape-mc-ls1088ardb \
|
|
layerscape-dpl-ls1088ardb \
|
|
tfa-ls1088ardb \
|
|
restool
|
|
DEVICE_DTS := freescale/fsl-ls1088a-rdb
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 256KiB
|
|
PAGESIZE := 1
|
|
IMAGE/firmware.bin := \
|
|
ls-clean | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 10M | \
|
|
ls-append $(1)-mc.itb | pad-to 13M | \
|
|
ls-append $(1)-dpl.dtb | pad-to 14M | \
|
|
ls-append $(1)-dpc.dtb | pad-to 15M | \
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
append-kernel | pad-to 32M | \
|
|
append-ubi | check-size 67108865
|
|
endef
|
|
TARGET_DEVICES += ls1088ardb
|
|
|
|
define Device/ls1088ardb-sdboot
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := LS1088A-RDB
|
|
DEVICE_VARIANT := SD Card Boot
|
|
DEVICE_PACKAGES += \
|
|
layerscape-mc-ls1088ardb \
|
|
layerscape-dpl-ls1088ardb \
|
|
tfa-ls1088ardb-sdboot \
|
|
restool
|
|
DEVICE_DTS := freescale/fsl-ls1088a-rdb
|
|
FILESYSTEMS := ext4
|
|
IMAGES := sdcard.img
|
|
IMAGE/sdcard.img := \
|
|
ls-clean | \
|
|
ls-append-sdhead $(1) | pad-to 4K | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 10M | \
|
|
ls-append ls1088ardb-mc.itb | pad-to 13M | \
|
|
ls-append ls1088ardb-dpl.dtb | pad-to 14M | \
|
|
ls-append ls1088ardb-dpc.dtb | pad-to 15M | \
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
|
append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += ls1088ardb-sdboot
|
|
|
|
define Device/ls2088ardb
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := LS2088ARDB
|
|
DEVICE_PACKAGES += \
|
|
layerscape-mc-ls2088ardb \
|
|
layerscape-dpl-ls2088ardb \
|
|
tfa-ls2088ardb \
|
|
restool
|
|
DEVICE_DTS := freescale/fsl-ls2088a-rdb
|
|
FILESYSTEMS := squashfs
|
|
IMAGE/firmware.bin := \
|
|
ls-clean | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 10M | \
|
|
ls-append $(1)-mc.itb | pad-to 13M | \
|
|
ls-append $(1)-dpl.dtb | pad-to 14M | \
|
|
ls-append $(1)-dpc.dtb | pad-to 15M | \
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
append-kernel | pad-to 32M | \
|
|
append-rootfs | pad-rootfs | check-size 67108865
|
|
endef
|
|
TARGET_DEVICES += ls2088ardb
|
|
|
|
define Device/traverse-ls1043
|
|
DEVICE_VENDOR := Traverse
|
|
DEVICE_MODEL := LS1043 Boards
|
|
KERNEL_NAME := Image
|
|
KERNEL_SUFFIX := -kernel.itb
|
|
KERNEL_INSTALL := 1
|
|
FDT_LOADADDR = 0x90000000
|
|
FILESYSTEMS := ubifs
|
|
DEVICE_PACKAGES += \
|
|
layerscape-fman-ls1043ardb \
|
|
uboot-envtools \
|
|
kmod-i2c-core kmod-i2c-mux-pca954x \
|
|
kmod-hwmon-core \
|
|
kmod-gpio-pca953x kmod-input-gpio-keys-polled \
|
|
kmod-rtc-isl1208
|
|
DEVICE_DESCRIPTION = \
|
|
Build images for Traverse LS1043 boards. This generates a single image \
|
|
capable of booting on any of the boards in this family.
|
|
DEVICE_DTS = freescale/traverse-ls1043s
|
|
DEVICE_DTS_DIR = $(LINUX_DIR)/arch/arm64/boot/dts
|
|
DEVICE_DTS_CONFIG = ls1043s
|
|
KERNEL := kernel-bin | gzip | traverse-fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb $$(FDT_LOADADDR)
|
|
KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb $$(FDT_LOADADDR)
|
|
IMAGES = root sysupgrade.bin
|
|
IMAGE/root = append-rootfs
|
|
IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
|
|
MKUBIFS_OPTS := -m 2048 -e 124KiB -c 4096
|
|
endef
|
|
TARGET_DEVICES += traverse-ls1043
|