Difuse/difos
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
difos/target/linux
History
Ademar Arvati Filho 27b2f0fc0f kirkwood: add support for Iomega Storcenter ix2-200 
Iomega Storcenter ix2-200 is a dual SATA NAS powered by a Marvell
 Kirkwood SoC clocked at 1GHz. It has 256MB of RAM and 32MB of
 flash memory, 3x USB 2.0 and 1x 1Gbit/s NIC

Specification:
- SoC: Marvell Kirkwood 88F6281
- CPU/Speed: 1000Mhz
- Flash-Chip: Hynix NAND
- Flash size: 32 MiB,erase size:16 KiB,page size:512,OOB size:16
- RAM: 256MB
- LAN: 1x 1000 Mbps Ethernet
- WiFi: none
- 3x USB 2.0
- UART: for serial console

Installation instructions - easy steps:
1. download factory.bin and copy into tftp server
2. access uboot environment with serial cable and run
    ```
    setenv mainlineLinux yes
    setenv arcNumber 1682
    setenv console 'console=ttyS0,115200n8'
    setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)'
    setenv bootargs_root 'root='
    setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000'
    saveenv
    setenv serverip 192.168.1.1
    setenv ipaddr 192.168.1.13
    tftpboot 0x00800000 factory.bin
    nand erase 0x100000 $(filesize)
    nand write 0x00800000 0x100000 $(filesize)
    run bootcmd
    ```
3. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13)

Installation steps nand bad blocks proof:
1. download initramfs-uImage and copy into usb ext2 partition
    ```
    mkfs.ext2 -L ext2 /dev/sdh1
    mount -t ext2 /dev/sdh1 /mnt
    cp initramfs-uImage /mnt/initramfs.bin
    umount /mnt
    ```
2. access uboot environment with serial cable and run
    ```
    setenv mainlineLinux yes
    setenv arcNumber 1682
    setenv console 'console=ttyS0,115200n8'
    setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)'
    setenv bootargs_root 'root='
    setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000'
    saveenv
    usb reset; ext2load usb 0:1 0x00800000 /initramfs.bin; bootm 0x00800000
    ```
3. log into openwrt and sysupgrade to install into flash
    ```
    sysupgrade -n /tmp/sysupgrade.bin
    ```
4. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13)

Signed-off-by: Ademar Arvati Filho <arvati@hotmail.com>
2018-07-30 15:21:00 +02:00
..
adm5120 kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
adm8668 kernel: mark all v3.18 and v4.4 kernels are source-only 2018-05-24 08:55:52 +02:00
apm821xx apm821xx: clean up gpio-hogs 2018-07-30 08:12:32 +02:00
ar7 kernel: bump 4.9 to 4.9.100 2018-05-18 09:10:21 +02:00
ar71xx ar71xx: add support for TP-Link Archer C59 v2 2018-07-30 14:04:45 +02:00
arc770 arc: Update variables substitutions in u-boot env files 2018-07-12 10:24:31 +02:00
archs38 arc: Update variables substitutions in u-boot env files 2018-07-12 10:24:31 +02:00
armvirt arm64: enable harden branch predictor 2018-04-27 21:34:18 +02:00
at91 kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
ath25 ath25: drop 4.9 kernel support 2018-05-22 07:20:13 +02:00
ath79 ath79: Add switch reset definition in dts 2018-07-30 10:43:35 +02:00
au1000 kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
bcm53xx bcm53xx: revert SPI controller commit breaking flash reads 2018-07-29 11:02:57 +02:00
brcm47xx brcm47xx: rework model detection 2018-07-30 11:10:47 +02:00
brcm63xx brcm63xx: update DT RedBoot binding for the Inventel Livebox 1 2018-07-30 11:16:42 +02:00
brcm2708 brcm2708: split sdcard.img.gz into a sysupgrade and factory image 2018-07-30 08:11:36 +02:00
cns3xxx kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
gemini kernel: remove DEVMEM and DEVKMEM from target's config 2018-07-07 18:19:39 +02:00
generic kernel: add missing include to redboot.c 2018-07-30 12:07:06 +02:00
imx6 kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
ipq40xx ipq40xx: move essedma patches into same range 2018-07-25 12:13:19 +02:00
ipq806x ipq806x: dts: Remove device_type = "ethernet-phy" 2018-07-19 18:58:24 +02:00
ixp4xx kernel: bump to 4.9.105 2018-06-01 08:25:14 +02:00
kirkwood kirkwood: add support for Iomega Storcenter ix2-200 2018-07-30 15:21:00 +02:00
lantiq lantiq: add support for FritzBox 7312 2018-07-18 19:17:46 +02:00
layerscape layerscape: add Traverse LS1043-S support 2018-07-30 10:53:57 +02:00
malta malta: bump tp v4.14 2018-01-09 10:26:16 +01:00
mcs814x kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
mediatek mediatek: fix parallel build issues in image build code 2018-07-17 14:40:04 +02:00
mpc85xx WDR4900v1 remove dt node for absent hw crypto. 2018-07-07 18:19:39 +02:00
mvebu kernel: bump 4.14 to 4.14.51 2018-06-26 08:57:21 +02:00
mxs kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
octeon octeon: Add and set CPU type Octeon+ as default 2018-06-20 15:36:02 +02:00
octeontx kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
omap omap: disable ubifs 2018-07-30 11:03:02 +02:00
omap24xx omap24xx: remove referece to not existing kmod-usb-musb-tusb6010 2018-01-15 13:13:34 +01:00
orion orion: remove linux 4.4 support 2018-04-19 14:38:57 +02:00
oxnas kernel: remove DEVMEM and DEVKMEM from target's config 2018-07-07 18:19:39 +02:00
pistachio kernel: bump 4.14 to 4.14.42 2018-05-22 20:49:08 +02:00
ppc40x kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
ppc44x kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
ramips ramips: fix RBM11G name 2018-07-30 10:43:37 +02:00
rb532 kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
samsung samsung/s5pv210: New target 2018-07-30 14:10:00 +02:00
sunxi sunxi: Enable SD block devices 2018-07-07 18:19:39 +02:00
uml kernel: bump 4.9 to 4.9.100 2018-05-18 09:10:21 +02:00
x86 kernel: bump 4.9 to 4.9.106 2018-06-07 09:04:46 +02:00
xburst kernel: mark all v3.18 and v4.4 kernels are source-only 2018-05-24 08:55:52 +02:00
zynq zynq: remove config options handled by generic 2018-07-02 07:12:48 +02:00
Makefile