difos/target/linux
DENG Qingfang 1b7199c90c ramips: add support for JCG JHR-AC876M
JCG JHR-AC876M is an AC2600M router

Hardware specs:
  SoC: MT7621AT
  2.4GHz: MT7615N 4x4 @ PCIe0
  5GHz: MT7615N 4x4 @ PCIe1
  Flash: Winbond W25Q128JVSQ 16MiB
  RAM: Nanya NT5CB128M16 256MiB
  USB 2.0 and 3.0 ports
  6 LEDs, 3 of which are connected to SoC GPIO
  Reset and WPS buttons

Flash instructions:
Stock to OpenWrt:
  Upload factory.bin in stock firmware's upgrade page,
  do not preserve settings

OpenWrt to stock:
  Push and hold the reset button for 5s while power cycling to
  enter recovery mode;
  Visit 192.168.1.1 and upload stock firmware

MAC addresses map:
  0x0004  *:1c  wlan2g/wan/label
  0x8004  *:20  wlan5g
  0xe000  *:1b  lan
  0xe006  *:1a  not used in stock fw

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2019-12-13 19:43:47 +01:00
..
apm821xx treewide: kernel config: remove runtime options 2019-11-24 14:19:43 +01:00
ar7 kernel: bump 4.9 to 4.9.194 2019-09-24 12:52:05 +02:00
ar71xx kernel: bump 4.14 to 4.14.158 2019-12-10 09:50:42 +01:00
arc770 treewide: remove kmod-usb-core from DEVICE_PACKAGES 2019-10-06 21:28:49 +02:00
archs38 treewide: remove kmod-usb-core from DEVICE_PACKAGES 2019-10-06 21:28:49 +02:00
armvirt armvirt: fix overlay support by updating to f2fs/ext4 based overlays 2019-06-25 14:12:22 +00:00
at91 at91: disable legacy PTYs and virtual terminals 2019-12-09 20:14:17 +01:00
ath25 ath25: split up DEVICE_TITLE 2019-10-19 13:16:57 +02:00
ath79 ath79: add support for TP-Link TL-WDR4300 v1 (IL) 2019-12-12 14:42:05 +01:00
bcm53xx bcm53xx: sysupgrade: support Luxul NAND devices 2019-10-15 20:23:04 +02:00
brcm47xx brcm47xx: add switch configuration for WNR3500L 2019-12-08 00:21:36 +01:00
brcm63xx kernel: bump 4.19 to 4.19.85 2019-11-22 16:56:46 +01:00
brcm2708 kernel: bump 4.19 to 4.19.88 2019-12-10 09:50:42 +01:00
cns3xxx kernel: bump 4.19 to 4.19.86 2019-11-29 09:59:49 +01:00
gemini kernel: bump 4.19 to 4.19.88 2019-12-10 09:50:42 +01:00
generic kernel: bump 4.19 to 4.19.88 2019-12-10 09:50:42 +01:00
imx6 imx6: install-dtb as separate IMAGE 2019-09-15 15:00:17 +00:00
ipq40xx ipq40xx: add support for Crisis Innovation Lab MeshPoint.One 2019-11-30 00:53:36 +01:00
ipq806x kernel: bump 4.14 to 4.14.158 2019-12-10 09:50:42 +01:00
ixp4xx ixp4xx: remove CONFIG_LEGACY_PTY from kernel config 2019-12-09 20:14:17 +01:00
kirkwood kirkwood: remove CONFIG_LEGACY_PTY from kernel config 2019-12-09 20:14:20 +01:00
lantiq kernel: bump 4.19 to 4.19.88 2019-12-10 09:50:42 +01:00
layerscape kernel: bump 4.14 to 4.14.158 2019-12-10 09:50:42 +01:00
malta malta: remove CONFIG_LEGACY_PTY from kernel config 2019-12-09 20:16:53 +01:00
mediatek kernel: bump 4.19 to 4.19.88 2019-12-10 09:50:42 +01:00
mpc85xx mpc85xx: remove CONFIG_LEGACY_PTY from kernel config 2019-12-09 20:14:17 +01:00
mvebu kernel: bump 4.19 to 4.19.88 2019-12-10 09:50:42 +01:00
mxs treewide: kernel config: remove runtime options 2019-11-24 14:19:43 +01:00
octeon octeon: fix sysupgrade 2019-11-30 20:19:12 +02:00
octeontx octeontx: fix thunderx BGX underflow irq name 2019-10-27 12:13:59 +01:00
omap omap: switch from uEnv.txt to generic distro booting 2019-11-20 10:46:19 +01:00
orion orion: replace backticks by $(...) 2019-09-29 00:46:13 +02:00
oxnas kernel: bump 4.14 to 4.14.158 2019-12-10 09:50:42 +01:00
pistachio pistachio: split up DEVICE_TITLE 2019-10-12 23:37:00 +02:00
ramips ramips: add support for JCG JHR-AC876M 2019-12-13 19:43:47 +01:00
rb532 rb532: split up DEVICE_TITLE 2019-10-19 13:16:57 +02:00
samsung samsung: split up DEVICE_TITLE 2019-09-11 15:17:09 +02:00
sunxi sunxi: add support for FriendlyARM Nano PI NEO Air dev board 2019-12-13 12:20:09 +01:00
tegra x86,tegra,mvebu: image: use common reproducible IMG_PART_SIGNATURE 2019-11-11 16:37:13 +01:00
uml uml: remove CONFIG_LEGACY_PTY from kernel config 2019-12-09 20:14:17 +01:00
x86 kernel: bump 4.19 to 4.19.84 2019-11-19 14:59:03 +01:00
zynq treewide: kernel config: remove runtime options 2019-11-24 14:19:43 +01:00
Makefile