11bff24b3e
This patch adds support for D-Link DIR-1960 A1. Given the similarity with
the DIR-1760/2660 A1, this patch also introduces a common DTSI which can
be shared with these devices, with support to be added in future commits.
Specifications:
* Board: AP-MTKH7-0002
* SoC: MediaTek MT7621AT
* RAM: 256 MB (DDR3)
* Flash: 128 MB (NAND)
* WiFi: MediaTek MT7615N (x2)
* Switch: 1 WAN, 4 LAN (Gigabit)
* Ports: 1 USB 3.0
* Buttons: Reset, WPS
* LEDs: Power (white/orange), Internet (white/orange), WiFi 2.4G (white),
WiFi 5G (white), USB 3.0 (white)
Notes:
* WiFi 2.4G and WiFi 5G LEDs are wired directly to the wireless chips
Installation:
* D-Link Recovery GUI: power down the router, press and hold the reset
button, then re-plug it. Keep the reset button pressed until the power
LED starts flashing orange, manually assign a static IP address under
the 192.168.0.xxx subnet (e.g. 192.168.0.2) and go to http://192.168.0.1
* Some modern browsers may have problems flashing via the Recovery GUI,
if that occurs consider uploading the firmware through cURL:
curl -v -i -F "firmware=@file.bin" 192.168.0.1
MAC addresses:
lan factory 0xe000 *:EB (label)
wan factory 0xe006 *:EE
2.4 factory 0xe000 +1 *:EC
5.0 factory 0xe000 +2 *:ED
Seems like vendor didn't replace the dummy entrys in the calibration data.
Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
[fix whitespace issues, create patch to merge DIR-1960 first, move
special WiFi MAC settings to DTS, extend commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
105 lines
3.6 KiB
Bash
Executable file
105 lines
3.6 KiB
Bash
Executable file
#!/bin/sh
|
|
|
|
. /lib/functions/leds.sh
|
|
. /lib/functions/uci-defaults.sh
|
|
|
|
set_wifi_led() {
|
|
ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
|
|
}
|
|
|
|
|
|
board=$(board_name)
|
|
boardname="${board##*,}"
|
|
|
|
board_config_update
|
|
|
|
led_wlan="$(get_dt_led wlan)"
|
|
[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt"
|
|
|
|
case $board in
|
|
d-team,newifi-d2)
|
|
ucidef_set_led_netdev "internet" "internet" "$boardname:amber:internet" "wan"
|
|
ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:blue:wlan2g" "wlan0"
|
|
ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:blue:wlan5g" "wlan1"
|
|
;;
|
|
d-team,pbr-m1|\
|
|
gehua,ghl-r-001)
|
|
ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "wan"
|
|
;;
|
|
dlink,dir-1960-a1)
|
|
ucidef_set_led_netdev "wan" "wan" "$boardname:white:net" "wan"
|
|
;;
|
|
dlink,dir-860l-b1|\
|
|
dlink,dir-867-a1|\
|
|
dlink,dir-878-a1|\
|
|
dlink,dir-882-a1)
|
|
ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "wan"
|
|
;;
|
|
gnubee,gb-pc1|\
|
|
gnubee,gb-pc2)
|
|
ucidef_set_led_netdev "lan1" "lan1" "$boardname:green:lan1" "lan1"
|
|
ucidef_set_led_netdev "lan2" "lan2" "$boardname:green:lan2" "lan2"
|
|
;;
|
|
linksys,ea7300-v1|\
|
|
linksys,ea7500-v2)
|
|
ucidef_set_led_netdev "lan1" "lan1 link" "$boardname:green:lan1" "lan1" "link"
|
|
ucidef_set_led_netdev "lan2" "lan2 link" "$boardname:green:lan2" "lan2" "link"
|
|
ucidef_set_led_netdev "lan3" "lan3 link" "$boardname:green:lan3" "lan3" "link"
|
|
ucidef_set_led_netdev "lan4" "lan4 link" "$boardname:green:lan4" "lan4" "link"
|
|
ucidef_set_led_netdev "wan" "wan link" "$boardname:green:wan" "wan" "link"
|
|
;;
|
|
mikrotik,routerboard-m11g)
|
|
ucidef_set_rssimon "wlan0" "200000" "1"
|
|
ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100"
|
|
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100"
|
|
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi2" "wlan0" "40" "100"
|
|
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi3" "wlan0" "60" "100"
|
|
ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "$boardname:green:rssi4" "wlan0" "80" "100"
|
|
;;
|
|
mtc,wr1201)
|
|
ucidef_set_led_netdev "eth_link" "LAN link" "$boardname:green:eth_link" "br-lan"
|
|
;;
|
|
netgear,r6220|\
|
|
netgear,r6260|\
|
|
netgear,r6350|\
|
|
netgear,r6850|\
|
|
netgear,wac124|\
|
|
netgear,wndr3700-v5)
|
|
ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" "wan"
|
|
;;
|
|
netgear,r6700-v2|\
|
|
netgear,r6800)
|
|
ucidef_set_led_netdev "wan" "WAN" "$boardname:white:wan" "wan"
|
|
ucidef_set_led_netdev "lan1" "LAN1" "$boardname:white:lan1" "lan1"
|
|
ucidef_set_led_netdev "lan2" "LAN2" "$boardname:white:lan2" "lan2"
|
|
ucidef_set_led_netdev "lan3" "LAN3" "$boardname:white:lan3" "lan3"
|
|
ucidef_set_led_netdev "lan4" "LAN4" "$boardname:white:lan4" "lan4"
|
|
;;
|
|
tplink,re350-v1)
|
|
ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0"
|
|
ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$boardname:blue:wifi5G" "wlan1"
|
|
ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "lan" "tx rx"
|
|
ucidef_set_led_netdev "eth_link" "LAN link" "$boardname:green:eth_link" "lan" "link"
|
|
;;
|
|
tplink,re500-v1|\
|
|
tplink,re650-v1)
|
|
ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "lan" "tx rx"
|
|
ucidef_set_led_netdev "eth_link" "LAN link" "$boardname:green:eth_link" "lan" "link"
|
|
;;
|
|
xzwifi,creativebox-v1)
|
|
ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "wan"
|
|
;;
|
|
xiaomi,mi-router-ac2100)
|
|
ucidef_set_led_netdev "wan-blue" "WAN (blue)" "$boardname:blue:wan" "wan"
|
|
;;
|
|
xiaomi,redmi-router-ac2100)
|
|
ucidef_set_led_netdev "wan" "wan" "$boardname:white:wan" "wan"
|
|
;;
|
|
youhua,wr1200js)
|
|
ucidef_set_led_netdev "internet" "INTERNET" "$boardname:green:wan" "wan"
|
|
;;
|
|
esac
|
|
|
|
board_config_flush
|
|
|
|
exit 0
|