234eadd07e
This is an automatically generated commit which aids following Kernel patch history, as git will see the move and copy as a rename thus defeating the purpose. For the original discussion see: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://github.com/openwrt/openwrt/pull/18740 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
76 lines
1.9 KiB
Diff
76 lines
1.9 KiB
Diff
From 315fe7667c03c1f853e1a7038c28f23621a44a3d Mon Sep 17 00:00:00 2001
|
|
From: Christophe Roullier <christophe.roullier@foss.st.com>
|
|
Date: Tue, 27 Aug 2024 16:04:51 +0200
|
|
Subject: [PATCH] ARM: dts: stm32: add support of WLAN/BT on stm32mp157c-dk2
|
|
|
|
Add support of WLAN/BT Murata Type 1DX module:
|
|
- usart2 is used for Bluetooth interface
|
|
- sdmmc2 is used for WLAN (sdio) interface
|
|
|
|
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
|
|
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
|
|
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
---
|
|
arch/arm/boot/dts/st/stm32mp157c-dk2.dts | 41 +++++++++++++++++++++++-
|
|
1 file changed, 40 insertions(+), 1 deletion(-)
|
|
|
|
--- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
|
|
+++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
|
|
@@ -24,6 +24,11 @@
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
+
|
|
+ wifi_pwrseq: wifi-pwrseq {
|
|
+ compatible = "mmc-pwrseq-simple";
|
|
+ reset-gpios = <&gpioh 4 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
};
|
|
|
|
&cryp1 {
|
|
@@ -94,10 +99,44 @@
|
|
};
|
|
};
|
|
|
|
+/* Wifi */
|
|
+&sdmmc2 {
|
|
+ pinctrl-names = "default", "opendrain", "sleep";
|
|
+ pinctrl-0 = <&sdmmc2_b4_pins_a>;
|
|
+ pinctrl-1 = <&sdmmc2_b4_od_pins_a>;
|
|
+ pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
|
|
+ non-removable;
|
|
+ cap-sdio-irq;
|
|
+ st,neg-edge;
|
|
+ bus-width = <4>;
|
|
+ vmmc-supply = <&v3v3>;
|
|
+ mmc-pwrseq = <&wifi_pwrseq>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ status = "okay";
|
|
+
|
|
+ brcmf: bcrmf@1 {
|
|
+ reg = <1>;
|
|
+ compatible = "brcm,bcm4329-fmac";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&rtc_lsco_pins_a>;
|
|
+ };
|
|
+};
|
|
+
|
|
+/* Bluetooth */
|
|
&usart2 {
|
|
pinctrl-names = "default", "sleep", "idle";
|
|
pinctrl-0 = <&usart2_pins_c>;
|
|
pinctrl-1 = <&usart2_sleep_pins_c>;
|
|
pinctrl-2 = <&usart2_idle_pins_c>;
|
|
- status = "disabled";
|
|
+ uart-has-rtscts;
|
|
+ status = "okay";
|
|
+
|
|
+ bluetooth {
|
|
+ shutdown-gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;
|
|
+ compatible = "brcm,bcm43438-bt";
|
|
+ max-speed = <3000000>;
|
|
+ vbat-supply = <&v3v3>;
|
|
+ vddio-supply = <&v3v3>;
|
|
+ };
|
|
};
|