difos/target/linux/ramips/dts/mt7628an_teltonika_rut9xx.dtsi

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include "mt7628an.dtsi"

/ {
	chosen {
		bootargs = "console=ttyS0,115200";
	};

	aliases {
		led-boot = &led_power;
		led-failsafe = &led_power;
		led-upgrade = &led_power;
		led-running = &led_power;
	};

	gpio_spi {
		compatible = "spi-gpio";
		#address-cells = <1>;
		#size-cells = <0>;

		sck-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
		mosi-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
		cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
		num-chipselects = <1>;

		gpio_hc595: gpio_hc595@0 {
			compatible = "fairchild,74hc595";
			reg = <0>;
			gpio-controller;
			#gpio-cells = <2>;
			registers-number = <2>;
			spi-max-frequency = <10000000>;
		};
	};

	gpio-export {
		compatible = "gpio-export";

		gpio_modem_reset {
			gpio-export,name = "modem_reset";
			gpio-export,output = <0>;
			gpios = <&gpio_hc595 11 GPIO_ACTIVE_HIGH>;
		};

		gpio_modem_power {
			gpio-export,name = "modem_power";
			gpio-export,output = <0>;
			gpios = <&gpio_hc595 10 GPIO_ACTIVE_HIGH>;
		};

		gpio_sim_select {
			gpio-export,name = "sim_sel";
			gpio-export,output = <0>;
			gpios = <&gpio_hc595 7 GPIO_ACTIVE_LOW>;
		};

		gpio_esim_select {
			gpio-export,name = "esim_sel";
			gpio-export,output = <0>;
			gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
		};

		gpio_modem_status {
			gpio-export,name = "modem_status";
			gpio-export,input = <0>;
			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
		};

		gpio_din1 {
			gpio-export,name = "digital_input1";
			gpio-export,input = <0>;
			gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
		};

		gpio_dout1 {
			gpio-export,name = "digital_output1";
			gpio-export,output = <0>;
			gpios = <&gpio_hc595 12 GPIO_ACTIVE_HIGH>;
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			linux,code = <KEY_RESTART>;
			gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
		};
	};

	leds {
		compatible = "gpio-leds";

		lan1 {
			function = LED_FUNCTION_LAN;
			color = <LED_COLOR_ID_GREEN>;
			function-enumerator = <1>;
			gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
		};

		lan2 {
			function = LED_FUNCTION_LAN;
			color = <LED_COLOR_ID_GREEN>;
			function-enumerator = <2>;
			gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
		};

		lan3 {
			function = LED_FUNCTION_LAN;
			color = <LED_COLOR_ID_GREEN>;
			function-enumerator = <3>;
			gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
		};

		wan {
			function = LED_FUNCTION_WAN;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
		};

		modem_status_red {
			function = LED_FUNCTION_STATUS;
			color = <LED_COLOR_ID_RED>;
			gpios = <&gpio_hc595 5 GPIO_ACTIVE_HIGH>;
		};

		modem_status_green {
			function = LED_FUNCTION_STATUS;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&gpio_hc595 6 GPIO_ACTIVE_HIGH>;
		};

		rssi1{
			label = "green:rssi-1";
			gpios = <&gpio_hc595 0 GPIO_ACTIVE_HIGH>;
		};

		rssi2 {
			label = "green:rssi-2";
			gpios = <&gpio_hc595 1 GPIO_ACTIVE_HIGH>;
		};

		rssi3 {
			label = "green:rssi-3";
			gpios = <&gpio_hc595 2 GPIO_ACTIVE_HIGH>;
		};

		rssi4 {
			label = "green:rssi-4";
			gpios = <&gpio_hc595 3 GPIO_ACTIVE_HIGH>;
		};

		rssi5 {
			label = "green:rssi-5";
			gpios = <&gpio_hc595 4 GPIO_ACTIVE_HIGH>;
		};

		led_power: power {
			gpios = <&gpio_hc595 15 GPIO_ACTIVE_LOW>;
			function = LED_FUNCTION_POWER;
			color = <LED_COLOR_ID_GREEN>;
		};
	};
};

&spi0 {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <10000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x0 0x20000>;
				read-only;
			};

			partition@20000 {
				label = "config";
				reg = <0x020000 0x010000>;
				read-only;

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					macaddr_config_0: macaddr@0 {
						reg = <0x0 0x6>;
						compatible = "mac-base";
						#nvmem-cell-cells = <1>;
					};
				};
			};

			partition@30000 {
				label = "factory";
				reg = <0x030000 0x030000>;
				read-only;

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					eeprom_factory_0: eeprom@0 {
						reg = <0x20000 0x400>;
					};
				};
			};

			partition@60000 {
				compatible = "denx,uimage";
				label = "firmware";
				reg = <0x060000 0xf10000>;
			};

			partition@f70000 {
				label = "event-log";
				reg = <0xf70000 0x90000>;
			};
		};
	};
};

&state_default {
	gpio {
		groups = "i2s", "p4led_an", "p3led_an", "p2led_an", "p1led_an", "p0led_an", "gpio", "wled_an", "perst", "refclk", "spi cs1";
		function = "gpio";
	};
};

&wmac {
	status = "okay";
	nvmem-cells = <&eeprom_factory_0>, <&macaddr_config_0 2>;
	nvmem-cell-names = "eeprom", "mac-address";
};

&ethernet {
	nvmem-cells = <&macaddr_config_0 0>;
	nvmem-cell-names = "mac-address";
};

&esw {
	mediatek,portmap = <0x2f>;
};