difos/target/linux/ramips/dts/mt7628an_ravpower_rp-wd009.dts
Rosen Penev f955716341 ramips: fix wifi nodes to upstream standards
Replaced all mt76@ with wifi@ per upstream requirement for all wifi
nodes.

Added missing compatible string where appropriate as stated by mt76.yaml
upstream.

Also updated reg value to be consistent everywhere.

Replace all pci14c3 entries to use mediatek,mt76.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19067
Signed-off-by: Robert Marko <robimarko@gmail.com>
2025-07-04 22:01:40 +02:00

235 lines
3.8 KiB
Text

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "ravpower,rp-wd009", "mediatek,mt7628an-soc";
model = "RAVPower RP-WD009";
aliases {
led-boot = &led_globe;
led-failsafe = &led_globe;
led-running = &led_globe;
led-upgrade = &led_globe;
};
leds {
compatible = "gpio-leds";
led_globe: globe {
label = "white:globe";
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
};
wlan2 {
label = "white:wlan2";
gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wlan5 {
label = "white:wlan5";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
sd_white {
function = LED_FUNCTION_SD;
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
};
sd_red {
function = LED_FUNCTION_SD;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
/* Power interrupt on Pin 39 */
rfkill {
label = "rfkill";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
backup {
label = "backup";
gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
linux,code = <KEY_COPY>;
};
};
};
&gpio {
mt7610-power {
gpio-hog;
gpios = <20 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "mt7610-power";
};
};
&pinctrl {
ephy-digital;
sdxc_iot_mode: sdxc_iot_mode {
esd {
groups = "esd";
function = "iot";
};
sdxc {
groups = "sdmode";
function = "sdxc";
};
};
};
&state_default {
gpio {
groups = "uart1", "wled_an", "p0led_an", "p2led_an", "p3led_an",
"p4led_an", "uart2", "pwm0", "i2s";
function = "gpio";
};
};
&sdhci {
status = "okay";
pinctrl-0 = <&sdxc_iot_mode>;
pinctrl-1 = <&sdxc_iot_mode>;
};
&i2c {
status = "okay";
/* Custom PMIC at 0x0a */
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_8000>;
nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <5470000 6000000>;
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bootloader";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "config";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x400>;
};
eeprom_factory_8000: eeprom@8000 {
reg = <0x8000 0x200>;
};
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
};
};
};
partition@50000 {
label = "loader";
reg = <0x50000 0x180000>;
};
partition@1d0000 {
label = "params";
reg = <0x1d0000 0x10000>;
read-only;
};
partition@1e0000 {
label = "user_backup";
reg = <0x1e0000 0x10000>;
read-only;
};
partition@1f0000 {
label = "user";
reg = <0x1f0000 0x10000>;
read-only;
};
partition@200000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x200000 0xdf0000>;
};
partition@ff0000 {
label = "mode";
reg = <0xff0000 0x10000>;
read-only;
};
};
};
};
&wmac {
status = "okay";
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
};
&ethernet {
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
};