difos/target/linux/ramips/dts/mt7621_wavlink_ws-wn572hp3-4g.dts
Rosen Penev f955716341 ramips: fix wifi nodes to upstream standards
Replaced all mt76@ with wifi@ per upstream requirement for all wifi
nodes.

Added missing compatible string where appropriate as stated by mt76.yaml
upstream.

Also updated reg value to be consistent everywhere.

Replace all pci14c3 entries to use mediatek,mt76.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19067
Signed-off-by: Robert Marko <robimarko@gmail.com>
2025-07-04 22:01:40 +02:00

187 lines
3.1 KiB
Text

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "wavlink,ws-wn572hp3-4g", "mediatek,mt7621-soc";
model = "Wavlink WS-WN572HP3 4G";
chosen {
bootargs = "console=ttyS0,115200";
};
aliases {
label-mac-device = &wifi1;
led-boot = &led_status_blue;
led-failsafe = &led_status_blue;
led-running = &led_status_blue;
led-upgrade = &led_status_blue;
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset Button";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
rssihigh {
label = "blue:rssihigh";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
rssimedium {
label = "blue:rssimedium";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
rssilow {
label = "blue:rssilow";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
led_status_blue: status_blue {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
// gpio 15 would be Quectels PWRKEY if used
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "config";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x400>;
};
eeprom_factory_8000: eeprom@8000 {
reg = <0x8000 0x4da8>;
};
macaddr_factory_e000: macaddr@e000 {
reg = <0xe000 0x6>;
};
macaddr_factory_e006: macaddr@e006 {
reg = <0xe006 0x6>;
};
};
};
partition@50000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x50000 0xf30000>;
};
partition@f00000 {
label = "vendor";
reg = <0xf80000 0x80000>;
read-only;
};
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
ieee80211-freq-limit = <2400000 2500000>;
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
};
};
&pcie1 {
wifi1: wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
ieee80211-freq-limit = <5000000 6000000>;
nvmem-cells = <&eeprom_factory_8000>;
nvmem-cell-names = "eeprom";
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_e000>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy4>;
nvmem-cells = <&macaddr_factory_e006>;
nvmem-cell-names = "mac-address";
};
&ethphy4 {
/delete-property/ interrupts;
};
&switch0 {
ports {
port@1 {
status = "okay";
label = "lan";
};
};
};
&state_default {
gpio {
groups = "wdt";
function = "gpio";
};
};