difos/target/linux/ramips/dts/mt7621_telco-electronics_x1.dts
Rosen Penev f955716341 ramips: fix wifi nodes to upstream standards
Replaced all mt76@ with wifi@ per upstream requirement for all wifi
nodes.

Added missing compatible string where appropriate as stated by mt76.yaml
upstream.

Also updated reg value to be consistent everywhere.

Replace all pci14c3 entries to use mediatek,mt76.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19067
Signed-off-by: Robert Marko <robimarko@gmail.com>
2025-07-04 22:01:40 +02:00

216 lines
3.5 KiB
Text

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "telco-electronics,x1", "mediatek,mt7621-soc";
model = "Telco Electronics X1";
aliases {
led-boot = &system_led;
led-failsafe = &system_led;
led-running = &system_led;
led-upgrade = &system_led;
};
chosen {
bootargs = "console=ttyS0,115200";
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
system_led: system {
label = "green:system";
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
};
modem_offline {
label = "red:modem-offline";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
};
modem_4g {
label = "blue:modem-4g";
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
};
modem_3g {
label = "green:modem-3g";
gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
};
modem_rssi_lowest {
label = "green:modem-rssi-lowest";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
};
modem_rssi_low {
label = "green:modem-rssi-low";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
};
modem_rssi_medium {
label = "green:modem-rssi-medium";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
};
modem_rssi_high {
label = "green:modem-rssi-high";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
};
modem_rssi_highest {
label = "green:modem-rssi-highest";
gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <14000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bootloader";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "config";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x400>;
};
eeprom_factory_8000: eeprom@8000 {
reg = <0x8000 0x200>;
};
macaddr_factory_e006: macaddr@e006 {
compatible = "mac-base";
reg = <0xe006 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
};
&ethernet {
pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
};
&gmac0 {
nvmem-cells = <&macaddr_factory_e006 0>;
nvmem-cell-names = "mac-address";
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "lan1";
};
port@1 {
status = "okay";
label = "lan2";
};
port@2 {
status = "okay";
label = "lan3";
};
port@3 {
status = "okay";
label = "lan4";
};
port@4 {
status = "okay";
label = "wan";
nvmem-cells = <&macaddr_factory_e006 1>;
nvmem-cell-names = "mac-address";
};
};
};
&state_default {
gpio {
groups = "wdt", "rgmii2";
function = "gpio";
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <2400000 2500000>;
};
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_8000>;
nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <5000000 6000000>;
led {
led-sources = <2>;
};
};
};