difos/target/linux/ramips/dts/mt7620a_edimax_br-6208ac-v2.dts
Rosen Penev f955716341 ramips: fix wifi nodes to upstream standards
Replaced all mt76@ with wifi@ per upstream requirement for all wifi
nodes.

Added missing compatible string where appropriate as stated by mt76.yaml
upstream.

Also updated reg value to be consistent everywhere.

Replace all pci14c3 entries to use mediatek,mt76.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19067
Signed-off-by: Robert Marko <robimarko@gmail.com>
2025-07-04 22:01:40 +02:00

222 lines
4.4 KiB
Text

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2023 Stefan Weil <sw@weilnetz.de>
*/
#include "mt7620a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
compatible = "edimax,br-6208ac-v2", "ralink,mt7620a-soc";
model = "Edimax BR-6208AC v2";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_firmware;
};
keys {
compatible = "gpio-keys";
// Vendor firmware: /proc/RESET_BUTTON
reset_wps {
label = "reset_wps";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
// Vendor firmware: /proc/driver/led
leds {
compatible = "gpio-leds";
led_power: power {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_POWER;
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
// RALINK_REG_PIO3924DATA 39-24
led_internet: internet {
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
// RALINK_REG_PIO7140DATA 44-40
led_wlan_2_4ghz: wlan_2_4ghz {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WLAN;
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
// RALINK_REG_PIO7140DATA 43-40
led_wlan_5ghz: wlan_5ghz {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WLAN;
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
// RALINK_REG_PIO7140DATA 42-40
led_firmware: firmware {
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
// default-state = "keep";
};
// RALINK_REG_PIO7140DATA 41-40
led_vpn: vpn {
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
};
};
};
&gdma {
status = "okay";
};
// Vendor firmware: RALINK_REG_PIO7140 - gpio0: gpio@600
// Vendor firmware: RALINK_REG_PIO3924 - gpio1: gpio@638
// Vendor firmware: RALINK_REG_PIO7140 - gpio2: gpio@660
// Vendor firmware: RALINK_REG_PIO72 - gpio3: gpio@688
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
// Vendor partitions:
// 0x000000000000-0x000000030000 : "Bootloader"
// 0x000000030000-0x000000040000 : "Config"
// 0x000000040000-0x000000050000 : "Factory"
// 0x000000050000-0x000000070000 : "Cimage"
// 0x000000070000-0x000000fe0000 : "Uimage"
// 0x000000070000-0x000000190000 : "Kernel"
// 0x000000190000-0x000000fe0000 : "RootFS"
// 0x000000fe0000-0x000001000000 : "FreeSpace"
// Bootloader
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
// Config
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
// Factory
partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x200>;
};
eeprom_factory_8000: eeprom@8000 {
reg = <0x8000 0x200>;
};
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
};
macaddr_factory_2e: macaddr@2e {
reg = <0x2e 0x6>;
};
};
};
// Cimage
partition@50000 {
label = "cimage";
reg = <0x50000 0x20000>;
read-only;
};
partition@70000 {
compatible = "openwrt,uimage", "denx,uimage";
openwrt,offset = <FW_EDIMAX_OFFSET>;
openwrt,partition-magic = <FW_MAGIC_EDIMAX>;
label = "firmware";
reg = <0x00070000 0x00f70000>;
};
// FreeSpace
partition@fe0000 {
label = "freespace";
reg = <0xfe0000 0x20000>;
read-only;
};
};
};
};
&state_default {
gpio {
// TODO: "spi refclk"?
groups = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
function = "gpio";
};
};
&ethernet {
nvmem-cells = <&macaddr_factory_2e>;
nvmem-cell-names = "mac-address";
mediatek,portmap = "llllw";
};
&wmac {
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_8000>;
nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <5000000 6000000>;
};
};