Specifications: SoC: Qualcomm IPQ9570 RAM: 1 GiB DDR4 Flash: 4 GiB eMMC ETH1: 2.5G Maxlinear GPY211C (48V POE-in) ETH2: 10G Realtek RTL8261N SFP: 10G SFP+ cage WLAN1: QCN9274 2.4GHz 802.11b/g/n/ax/be 2x2 WLAN2: QCN9274 5-6GHz 802.11a/n/ac/ax/be 2x2 PCIE0: Gen3x1 mPCIe or M.2(B+M) PCIE1: Gen3x1 M.2(A+E) or M.2(B+M) PCIE2: Gen3x2 M.2(A+E) USB: 1x 3.0 Console: USB-C via FTDI Button: Reset Install using sysupgrade: sysupgrade openwrt-qualcommbe-ipq95xx-8devices_kiwi-dvk-squashfs-sysupgrade.bin Install using U-Boot: * Put factory.bin at TFTP server(192.168.2.254) as fwupdate.bin * Run 'run do_recovery' in U-Boot shell Signed-off-by: Mantas Pucka <mantas@8devices.com> Link: https://github.com/openwrt/openwrt/pull/18435 Signed-off-by: Robert Marko <robimarko@gmail.com>
66 lines
2 KiB
Text
66 lines
2 KiB
Text
CONFIG_AQUANTIA_PHY=y
|
|
CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y
|
|
CONFIG_DT_IDLE_GENPD=y
|
|
CONFIG_F2FS_FS=y
|
|
CONFIG_GRO_CELLS=y
|
|
CONFIG_INTERCONNECT_QCOM=y
|
|
# CONFIG_INTERCONNECT_QCOM_MSM8909 is not set
|
|
# CONFIG_INTERCONNECT_QCOM_MSM8916 is not set
|
|
# CONFIG_INTERCONNECT_QCOM_MSM8937 is not set
|
|
# CONFIG_INTERCONNECT_QCOM_MSM8939 is not set
|
|
# CONFIG_INTERCONNECT_QCOM_MSM8953 is not set
|
|
# CONFIG_INTERCONNECT_QCOM_MSM8974 is not set
|
|
# CONFIG_INTERCONNECT_QCOM_MSM8976 is not set
|
|
# CONFIG_INTERCONNECT_QCOM_MSM8996 is not set
|
|
CONFIG_INTERCONNECT_QCOM_OSM_L3=y
|
|
# CONFIG_INTERCONNECT_QCOM_QCM2290 is not set
|
|
# CONFIG_INTERCONNECT_QCOM_QCS404 is not set
|
|
# CONFIG_INTERCONNECT_QCOM_SDM660 is not set
|
|
# CONFIG_INTERCONNECT_QCOM_SM6115 is not set
|
|
CONFIG_IPQ_CMN_PLL=y
|
|
CONFIG_IPQ_GCC_9574=y
|
|
CONFIG_IPQ_NSSCC_9574=y
|
|
CONFIG_IPQ_NSSCC_QCA8K=y
|
|
CONFIG_MDIO_BITBANG=y
|
|
CONFIG_MDIO_GPIO=y
|
|
# CONFIG_MFD_HI6421_SPMI is not set
|
|
CONFIG_MFD_SPMI_PMIC=y
|
|
CONFIG_MTD_SPI_NAND=y
|
|
CONFIG_NET_DEVLINK=y
|
|
CONFIG_NET_DSA=y
|
|
CONFIG_NET_DSA_QCA8K=y
|
|
CONFIG_NET_DSA_TAG_QCA=y
|
|
# CONFIG_NVMEM_SPMI_SDAM is not set
|
|
CONFIG_PHYLINK=y
|
|
CONFIG_PINCTRL_IPQ9574=y
|
|
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
|
|
# CONFIG_PM8916_WATCHDOG is not set
|
|
CONFIG_PM_GENERIC_DOMAINS=y
|
|
CONFIG_PM_GENERIC_DOMAINS_OF=y
|
|
# CONFIG_POWER_RESET_QCOM_PON is not set
|
|
CONFIG_QCA83XX_PHY=y
|
|
CONFIG_QCOM_APM=y
|
|
# CONFIG_QCOM_CLK_SMD_RPM is not set
|
|
# CONFIG_QCOM_COINCELL is not set
|
|
CONFIG_QCOM_GDSC=y
|
|
# CONFIG_QCOM_RPMPD is not set
|
|
CONFIG_QCOM_SMD_RPM=y
|
|
CONFIG_QCOM_SPMI_ADC5=y
|
|
# CONFIG_QCOM_SPMI_RRADC is not set
|
|
CONFIG_QCOM_VADC_COMMON=y
|
|
CONFIG_REGMAP_SPMI=y
|
|
CONFIG_REGULATOR_CPR3=y
|
|
# CONFIG_REGULATOR_CPR3_NPU is not set
|
|
CONFIG_REGULATOR_CPR4_APSS=y
|
|
# CONFIG_REGULATOR_QCOM_LABIBB is not set
|
|
CONFIG_REGULATOR_QCOM_SMD_RPM=y
|
|
CONFIG_REGULATOR_QCOM_SPMI=y
|
|
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
|
|
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
|
|
CONFIG_RTC_DRV_PM8XXX=y
|
|
CONFIG_SPI_QPIC_SNAND=y
|
|
CONFIG_RTL8261N_PHY=y
|
|
CONFIG_SPMI=y
|
|
# CONFIG_SPMI_HISI3670 is not set
|
|
CONFIG_SPMI_MSM_PMIC_ARB=y
|
|
# CONFIG_SPMI_PMIC_CLKDIV is not set
|