db3eff1022
Hardware specification:
SoC: MediaTek MT7986A 4x A53
Flash: ESMT F50L1G41LB 128MB
RAM: M16U4G16256A DDR4 512MB
Ethernet: 2x 2.5G + 3x 1G
USB: 1x USB 3.0
WiFi1: MT7975N 2.4GHz 4T4R
WiFi2: MT7975PN 5GHz 4T4R
Button: Reset, WPS
Power: DC 12V 2A
Flash instructions:
Connect to the router using ssh or telnet,
username: useradmin, password is the web
login password of the router.
Use scp to upload bl31-uboot.fip and flash:
"mtd write xxx-bl31-uboot.fip FIP"
"mtd erase ubi"
Connect to the router via the Lan port,
set a static ip of your PC.
(ip 192.168.1.254, gateway 192.168.1.1)
Download initramfs image, reboot router,
waiting for tftp recovery to complete.
After openwrt boots up, perform sysupgrade.
Note:
Back up all mtd partitions before flashing.
Signed-off-by: Yujie Zhu <libriunc@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18138
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
370 lines
6.3 KiB
Text
370 lines
6.3 KiB
Text
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
#include "mt7986a.dtsi"
|
|
|
|
/ {
|
|
model = "Netcore N60 Pro";
|
|
compatible = "netcore,n60-pro", "mediatek,mt7986a";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
led-boot = &led_power;
|
|
led-failsafe = &led_power;
|
|
led-running = &led_power;
|
|
led-upgrade = &led_power;
|
|
label-mac-device = &gmac0;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "root=/dev/fit0 rootwait";
|
|
rootdisk = <&ubi_rootdisk>;
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory@40000000 {
|
|
reg = <0 0x40000000 0 0x20000000>;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
button-reset {
|
|
label = "reset";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
button-mesh {
|
|
label = "mesh";
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led-0 {
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
function = LED_FUNCTION_WLAN;
|
|
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "phy1tpt";
|
|
};
|
|
|
|
led_power: led-1 {
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
function = LED_FUNCTION_POWER;
|
|
gpios = <&pio 29 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led-2 {
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
function = LED_FUNCTION_USB;
|
|
gpios = <&pio 30 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led-3 {
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
function = LED_FUNCTION_WPS;
|
|
gpios = <&pio 31 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led-4 {
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
function = LED_FUNCTION_WAN;
|
|
gpios = <&pio 32 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_5v: regulator-5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
&crypto {
|
|
status = "okay";
|
|
};
|
|
|
|
ð {
|
|
status = "okay";
|
|
|
|
gmac0: mac@0 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
nvmem-cells = <&macaddr_factory_1fef20>;
|
|
nvmem-cell-names = "mac-address";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
|
|
gmac1: mac@1 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <1>;
|
|
phy-handle = <&phy6>;
|
|
phy-mode = "2500base-x";
|
|
|
|
nvmem-cells = <&macaddr_factory_1fef26>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
mdio: mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
reset-delay-us = <600>;
|
|
reset-post-delay-us = <20000>;
|
|
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
|
|
|
phy5: phy@5 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <5>;
|
|
|
|
leds {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led@3 {
|
|
reg = <3>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_LAN;
|
|
};
|
|
};
|
|
};
|
|
|
|
phy6: phy@6 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <6>;
|
|
|
|
leds {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led@3 {
|
|
reg = <3>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_WAN;
|
|
};
|
|
};
|
|
};
|
|
|
|
switch: switch@1f {
|
|
compatible = "mediatek,mt7531";
|
|
reg = <31>;
|
|
reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
&switch {
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "lan2";
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "lan3";
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
label = "lan4";
|
|
};
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
label = "lan1";
|
|
phy-mode = "2500base-x";
|
|
phy-handle = <&phy5>;
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
ethernet = <&gmac0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi_flash_pins>;
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "spi-nand";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0>;
|
|
|
|
spi-max-frequency = <20000000>;
|
|
spi-tx-bus-width = <4>;
|
|
spi-rx-bus-width = <4>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "bl2";
|
|
reg = <0x0 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "u-boot-env";
|
|
reg = <0x100000 0x80000>;
|
|
};
|
|
|
|
partition@180000 {
|
|
label = "factory";
|
|
reg = <0x180000 0x200000>;
|
|
read-only;
|
|
|
|
nvmem-layout {
|
|
compatible = "fixed-layout";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
eeprom_factory_0: eeprom@0 {
|
|
reg = <0x0 0x1000>;
|
|
};
|
|
|
|
macaddr_factory_1fef20: macaddr@1fef20 {
|
|
reg = <0x1fef20 0x6>;
|
|
};
|
|
|
|
macaddr_factory_1fef26: macaddr@1fef26 {
|
|
reg = <0x1fef26 0x6>;
|
|
};
|
|
};
|
|
};
|
|
|
|
partition@380000 {
|
|
label = "fip";
|
|
reg = <0x380000 0x200000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@580000 {
|
|
label = "ubi";
|
|
reg = <0x0580000 0x7a80000>;
|
|
compatible = "linux,ubi";
|
|
|
|
volumes {
|
|
ubi_rootdisk: ubi-volume-fit {
|
|
volname = "fit";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pio {
|
|
spi_flash_pins: spi-flash-pins-33-to-38 {
|
|
mux {
|
|
function = "spi";
|
|
groups = "spi0", "spi0_wp_hold";
|
|
};
|
|
conf-pu {
|
|
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
|
|
drive-strength = <8>;
|
|
mediatek,pull-up-adv = <0>; /* bias-disable */
|
|
};
|
|
conf-pd {
|
|
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
|
|
drive-strength = <8>;
|
|
mediatek,pull-down-adv = <0>; /* bias-disable */
|
|
};
|
|
};
|
|
|
|
wf_2g_5g_pins: wf_2g_5g-pins {
|
|
mux {
|
|
function = "wifi";
|
|
groups = "wf_2g", "wf_5g";
|
|
};
|
|
conf {
|
|
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
|
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
|
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
|
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
|
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
|
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
|
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
|
drive-strength = <4>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&ssusb {
|
|
vusb33-supply = <®_3p3v>;
|
|
vbus-supply = <®_5v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&trng {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&watchdog {
|
|
status = "okay";
|
|
};
|
|
|
|
&wifi {
|
|
nvmem-cells = <&eeprom_factory_0>;
|
|
nvmem-cell-names = "eeprom";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wf_2g_5g_pins>;
|
|
status = "okay";
|
|
};
|