ddf7d63e94
Add new mtdsplit parser "mstc-boot" for the devices manufactured by MSTC
(Mitra Star Technology Corp.). This is necessary to handle dual-boot on
those devices.
This parser splits kernel+rootfs or only rootfs(or UBI) based on the
image in the firmware partition or pre-defined partitions in dts, and
"bootnum" value in the "persist" (or "working") partition.
Note: "bootnum" is used for switching active firmware partitions on the
devices manufactured by MSTC and '1' or '2' are used on most
devices. But some devices use '0' or '1'. (example: I-O DATA
WN-DEAX1800GR)
Sequence:
1. obtain "bootnum" value
2. child nodes exsist (regardless of bootnum)
-> fixed partitions
(active parts : without bootnum (ex.: "kernel", "rootfs")
inactive parts: with bootnum (ex.: "kernel2", "rootfs2"))
3. current partition is active (dt bootnum == mtd bootnum)
-> image-based partitions
Device Tree:
- common
- mstc,bootnum : "bootnum" value for the mtd partition (0/1/2)
- mstc,persist : phandle of "persist" partition containing "bootnum"
value
- fixed partitions
- #address-cells: indicate cell count of address of child nodes (1)
- #size-cells : indicate cell count of size of child nodes (1)
- (child nodes) : define the child partitions
- reg : define the offset and size
- label-base : define the base name of the partition
- (example) : base:"kernel"->"kernel"(active)/"kernel2"(inactive)
example:
partition@3c0000 {
compatible = "mstc,boot";
reg = <0x3c0000 0x3240000>;
label = "firmware1";
mstc,bootnum = <1>;
mstc,persist = <&mtd_persist>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x800000>;
label-base = "kernel";
};
partition@800000 {
reg = <0x800000 0x2a40000>;
label-base = "ubi";
};
};
- image-based partitions
(no additional properties)
example:
partition@5a0000 {
compatible = "mstc,boot";
label = "firmware1";
reg = <0x5a0000 0x3200000>;
mstc,bootnum = <1>;
mstc,persist = <&mtd_persist>;
};
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18976
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
20 lines
1 KiB
Makefile
20 lines
1 KiB
Makefile
obj-$(CONFIG_MTD_SPLIT) += mtdsplit.o
|
|
obj-$(CONFIG_MTD_SPLIT_BCM63XX_FW) += mtdsplit_bcm63xx.o
|
|
obj-$(CONFIG_MTD_SPLIT_BCM_WFI_FW) += mtdsplit_bcm_wfi.o
|
|
obj-$(CONFIG_MTD_SPLIT_CFE_BOOTFS) += mtdsplit_cfe_bootfs.o
|
|
obj-$(CONFIG_MTD_SPLIT_SEAMA_FW) += mtdsplit_seama.o
|
|
obj-$(CONFIG_MTD_SPLIT_SEIL_FW) += mtdsplit_seil.o
|
|
obj-$(CONFIG_MTD_SPLIT_SQUASHFS_ROOT) += mtdsplit_squashfs.o
|
|
obj-$(CONFIG_MTD_SPLIT_UIMAGE_FW) += mtdsplit_uimage.o
|
|
obj-$(CONFIG_MTD_SPLIT_FIT_FW) += mtdsplit_fit.o
|
|
obj-$(CONFIG_MTD_SPLIT_LZMA_FW) += mtdsplit_lzma.o
|
|
obj-$(CONFIG_MTD_SPLIT_TPLINK_FW) += mtdsplit_tplink.o
|
|
obj-$(CONFIG_MTD_SPLIT_TRX_FW) += mtdsplit_trx.o
|
|
obj-$(CONFIG_MTD_SPLIT_BRNIMAGE_FW) += mtdsplit_brnimage.o
|
|
obj-$(CONFIG_MTD_SPLIT_EVA_FW) += mtdsplit_eva.o
|
|
obj-$(CONFIG_MTD_SPLIT_WRGG_FW) += mtdsplit_wrgg.o
|
|
obj-$(CONFIG_MTD_SPLIT_MINOR_FW) += mtdsplit_minor.o
|
|
obj-$(CONFIG_MTD_SPLIT_JIMAGE_FW) += mtdsplit_jimage.o
|
|
obj-$(CONFIG_MTD_SPLIT_ELF_FW) += mtdsplit_elf.o
|
|
obj-$(CONFIG_MTD_SPLIT_H3C_VFS) += mtdsplit_h3c_vfs.o
|
|
obj-$(CONFIG_MTD_SPLIT_MSTC_BOOT) += mtdsplit_mstc_boot.o
|