65b8a978de
Specifications: - SoC: Broadcom BCM63168 dual 400MHz MIPS - Flash: 128MB NAND ESMT F59L1G81A - RAM: 128MB DDR3 - Ethernet: 5x 1000M - Wifi: BCM435F - 1x USB 2.0 port - 2x Button - 11x LED - Coax HPNA (unsupported) - RJ11 xDSL (unsupported) Install instructions: The booloader will only install signed firmware so the image has to be manually flashed. - Set up a TFTP server on 192.168.1.0/24 to serve the initramfs image - Interrupt the bootloader and run from RAM with r 192.168.1.100:openwrt-bmips-bcm63268-actiontec_t1200h-initramfs.elf - On the openwrt console, copy the wfi image using wget/tftp/scp, i.e scp user@192.168.1.100:~/openwrt/bin/targets/bmips/bcm63268/openwrt-bmips-bcm63268-actiontec_t1200h-squashfs-cfe.bin /tmp/ - Erase half the flash partition where openwrt will be installed with flash_erase -j /dev/mtd1 0 491 - Flash the openwrt image with nandwrite -p /dev/mtd1 /tmp/openwrt-bmips-bcm63268-actiontec_t1200h-squashfs-cfe.bin - Reboot - Interrupt the bootloader again and use the c command to boot from previous firmware if vendor image is loaded Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com> [Minor improvements to DTS file] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
155 lines
3.8 KiB
Makefile
155 lines
3.8 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
define Device/actiontec_t1200h
|
|
$(Device/bcm63xx-nand)
|
|
DEVICE_VENDOR := Actiontec
|
|
DEVICE_MODEL := T1200H
|
|
CHIP_ID := 63268
|
|
SOC := bcm63168
|
|
CFE_RAM_FILE := actiontec,t1200h/cferam.000
|
|
CFE_RAM_JFFS2_NAME := cferam.000
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SUBPAGESIZE := 512
|
|
VID_HDR_OFFSET := 2048
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
kmod-leds-gpio
|
|
CFE_WFI_FLASH_TYPE := 3
|
|
CFE_WFI_VERSION := 0x5732
|
|
endef
|
|
TARGET_DEVICES += actiontec_t1200h
|
|
|
|
define Device/comtrend_vg-8050
|
|
$(Device/bcm63xx-nand)
|
|
DEVICE_VENDOR := Comtrend
|
|
DEVICE_MODEL := VG-8050
|
|
CHIP_ID := 63268
|
|
SOC := bcm63169
|
|
CFE_RAM_FILE := comtrend,vg-8050/cferam.000
|
|
CFE_RAM_JFFS2_NAME := cferam.000
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SUBPAGESIZE := 512
|
|
VID_HDR_OFFSET := 2048
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
kmod-leds-bcm6328
|
|
CFE_WFI_FLASH_TYPE := 3
|
|
CFE_WFI_VERSION := 0x5732
|
|
endef
|
|
TARGET_DEVICES += comtrend_vg-8050
|
|
|
|
define Device/comtrend_vr-3032u
|
|
$(Device/bcm63xx-nand)
|
|
DEVICE_VENDOR := Comtrend
|
|
DEVICE_MODEL := VR-3032u
|
|
CHIP_ID := 63268
|
|
SOC := bcm63168
|
|
CFE_RAM_FILE := comtrend,vr-3032u/cferam.000
|
|
CFE_RAM_JFFS2_NAME := cferam.000
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SUBPAGESIZE := 512
|
|
VID_HDR_OFFSET := 2048
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
kmod-leds-bcm6328
|
|
CFE_WFI_FLASH_TYPE := 3
|
|
CFE_WFI_VERSION := 0x5732
|
|
endef
|
|
TARGET_DEVICES += comtrend_vr-3032u
|
|
|
|
define Device/sagem_fast-3864-op
|
|
$(Device/bcm63xx-nand)
|
|
DEVICE_VENDOR := Sagemcom
|
|
DEVICE_MODEL := F@ST 3864
|
|
DEVICE_VARIANT := OP
|
|
CHIP_ID := 63268
|
|
SOC := bcm63168
|
|
CFE_RAM_FILE := sagem,fast-3864-op/cferam.000
|
|
CFE_RAM_JFFS2_NAME := cferam.000
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SUBPAGESIZE := 512
|
|
VID_HDR_OFFSET := 2048
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
kmod-leds-bcm6328
|
|
CFE_WFI_FLASH_TYPE := 3
|
|
CFE_WFI_VERSION := 0x5732
|
|
endef
|
|
TARGET_DEVICES += sagem_fast-3864-op
|
|
|
|
define Device/sercomm_h500-s-lowi
|
|
$(Device/sercomm-nand)
|
|
DEVICE_VENDOR := Sercomm
|
|
DEVICE_MODEL := H500-s
|
|
DEVICE_VARIANT := lowi
|
|
DEVICE_LOADADDR := $(KERNEL_LOADADDR)
|
|
KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
|
|
CHIP_ID := 63268
|
|
SOC := bcm63167
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SUBPAGESIZE := 512
|
|
VID_HDR_OFFSET := 2048
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
kmod-leds-bcm6328
|
|
SERCOMM_FSVER := 1001
|
|
SERCOMM_HWVER := 1434b31
|
|
SERCOMM_SWVER := 3305
|
|
endef
|
|
TARGET_DEVICES += sercomm_h500-s-lowi
|
|
|
|
define Device/sercomm_h500-s-vfes
|
|
$(Device/sercomm-nand)
|
|
DEVICE_VENDOR := Sercomm
|
|
DEVICE_MODEL := H500-s
|
|
DEVICE_VARIANT := vfes
|
|
DEVICE_LOADADDR := $(KERNEL_LOADADDR)
|
|
KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
|
|
CHIP_ID := 63268
|
|
SOC := bcm63167
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SUBPAGESIZE := 512
|
|
VID_HDR_OFFSET := 2048
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
kmod-leds-bcm6328
|
|
SERCOMM_FSVER := 1001
|
|
SERCOMM_HWVER := 142584b
|
|
SERCOMM_SWVER := 3417
|
|
endef
|
|
TARGET_DEVICES += sercomm_h500-s-vfes
|
|
|
|
define Device/sercomm_shg2500
|
|
$(Device/sercomm-nand)
|
|
DEVICE_VENDOR := Sercomm
|
|
DEVICE_MODEL := SHG2500
|
|
DEVICE_LOADADDR := $(KERNEL_LOADADDR)
|
|
KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
|
|
CHIP_ID := 63268
|
|
SOC := bcm63168
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SUBPAGESIZE := 512
|
|
VID_HDR_OFFSET := 2048
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
broadcom-4360-sprom \
|
|
kmod-i2c-gpio kmod-leds-sercomm-msp430
|
|
SERCOMM_FSVER := 1001
|
|
SERCOMM_HWVER := 1424e4a
|
|
SERCOMM_SWVER := 3207
|
|
endef
|
|
TARGET_DEVICES += sercomm_shg2500
|
|
|
|
define Device/smartrg_sr505n
|
|
$(Device/bcm63xx-cfe)
|
|
DEVICE_VENDOR := SmartRG
|
|
DEVICE_MODEL := SR505n
|
|
DEVICE_LOADADDR := $(KERNEL_LOADADDR)
|
|
CHIP_ID := 63268
|
|
SOC := bcm63168
|
|
CFE_BOARD_ID := 963168MBV_17AZZ
|
|
FLASH_MB := 16
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
kmod-leds-bcm6328
|
|
endef
|
|
TARGET_DEVICES += smartrg_sr505n
|