difos/target/linux/bcm27xx/patches-6.12/950-0873-PCI-brcmstb-Reuse-config-structure.patch

From 9d331103243a5314703a58b17fd21a5c104df1cc Mon Sep 17 00:00:00 2001
From: Stanimir Varbanov <svarbanov@suse.de>
Date: Mon, 20 Jan 2025 15:01:12 +0200
Subject: [PATCH] PCI: brcmstb: Reuse config structure

Instead of copying fields from pcie_cfg_data structure to
brcm_pcie reference it directly.

Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelil <florian.fainelli@broadcom.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 70 ++++++++++++---------------
 1 file changed, 31 insertions(+), 39 deletions(-)

--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -191,11 +191,11 @@
 #define SSC_STATUS_PLL_LOCK_MASK	0x800
 #define PCIE_BRCM_MAX_MEMC		3
 
-#define IDX_ADDR(pcie)			((pcie)->reg_offsets[EXT_CFG_INDEX])
-#define DATA_ADDR(pcie)			((pcie)->reg_offsets[EXT_CFG_DATA])
-#define PCIE_RGR1_SW_INIT_1(pcie)	((pcie)->reg_offsets[RGR1_SW_INIT_1])
-#define HARD_DEBUG(pcie)		((pcie)->reg_offsets[PCIE_HARD_DEBUG])
-#define INTR2_CPU_BASE(pcie)		((pcie)->reg_offsets[PCIE_INTR2_CPU_BASE])
+#define IDX_ADDR(pcie)			((pcie)->cfg->offsets[EXT_CFG_INDEX])
+#define DATA_ADDR(pcie)			((pcie)->cfg->offsets[EXT_CFG_DATA])
+#define PCIE_RGR1_SW_INIT_1(pcie)	((pcie)->cfg->offsets[RGR1_SW_INIT_1])
+#define HARD_DEBUG(pcie)		((pcie)->cfg->offsets[PCIE_HARD_DEBUG])
+#define INTR2_CPU_BASE(pcie)		((pcie)->cfg->offsets[PCIE_INTR2_CPU_BASE])
 
 /* Rescal registers */
 #define PCIE_DVT_PMU_PCIE_PHY_CTRL				0xc700
@@ -276,8 +276,6 @@ struct brcm_pcie {
 	int			gen;
 	u64			msi_target_addr;
 	struct brcm_msi		*msi;
-	const int		*reg_offsets;
-	enum pcie_soc_base	soc_base;
 	struct reset_control	*rescal;
 	struct reset_control	*perst_reset;
 	struct reset_control	*bridge_reset;
@@ -285,17 +283,14 @@ struct brcm_pcie {
 	int			num_memc;
 	u64			memc_size[PCIE_BRCM_MAX_MEMC];
 	u32			hw_rev;
-	int			(*perst_set)(struct brcm_pcie *pcie, u32 val);
-	int			(*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val);
 	struct subdev_regulators *sr;
 	bool			ep_wakeup_capable;
-	bool			has_phy;
-	u8			num_inbound_wins;
+	const struct pcie_cfg_data	*cfg;
 };
 
 static inline bool is_bmips(const struct brcm_pcie *pcie)
 {
-	return pcie->soc_base == BCM7435 || pcie->soc_base == BCM7425;
+	return pcie->cfg->soc_base == BCM7435 || pcie->cfg->soc_base == BCM7425;
 }
 
 /*
@@ -855,7 +850,7 @@ static int brcm_pcie_get_inbound_wins(st
 	 * security considerations, and is not implemented in our modern
 	 * SoCs.
 	 */
-	if (pcie->soc_base != BCM7712)
+	if (pcie->cfg->soc_base != BCM7712)
 		add_inbound_win(b++, &n, 0, 0, 0);
 
 	resource_list_for_each_entry(entry, &bridge->dma_ranges) {
@@ -872,10 +867,10 @@ static int brcm_pcie_get_inbound_wins(st
 		 * That being said, each BARs size must still be a power of
 		 * two.
 		 */
-		if (pcie->soc_base == BCM7712)
+		if (pcie->cfg->soc_base == BCM7712)
 			add_inbound_win(b++, &n, size, cpu_start, pcie_start);
 
-		if (n > pcie->num_inbound_wins)
+		if (n > pcie->cfg->num_inbound_wins)
 			break;
 	}
 
@@ -889,7 +884,7 @@ static int brcm_pcie_get_inbound_wins(st
 	 * that enables multiple memory controllers.  As such, it can return
 	 * now w/o doing special configuration.
 	 */
-	if (pcie->soc_base == BCM7712)
+	if (pcie->cfg->soc_base == BCM7712)
 		return n;
 
 	ret = of_property_read_variable_u64_array(pcie->np, "brcm,scb-sizes", pcie->memc_size, 1,
@@ -1012,7 +1007,7 @@ static void set_inbound_win_registers(st
 		 * 7712:
 		 *     All of their BARs need to be set.
 		 */
-		if (pcie->soc_base == BCM7712) {
+		if (pcie->cfg->soc_base == BCM7712) {
 			/* BUS remap register settings */
 			reg_offset = brcm_ubus_reg_offset(i);
 			tmp = lower_32_bits(cpu_addr) & ~0xfff;
@@ -1036,15 +1031,15 @@ static int brcm_pcie_setup(struct brcm_p
 	int memc, ret;
 
 	/* Reset the bridge */
-	ret = pcie->bridge_sw_init_set(pcie, 1);
+	ret = pcie->cfg->bridge_sw_init_set(pcie, 1);
 	if (ret)
 		return ret;
 
 	/* Ensure that PERST# is asserted; some bootloaders may deassert it. */
-	if (pcie->soc_base == BCM2711) {
-		ret = pcie->perst_set(pcie, 1);
+	if (pcie->cfg->soc_base == BCM2711) {
+		ret = pcie->cfg->perst_set(pcie, 1);
 		if (ret) {
-			pcie->bridge_sw_init_set(pcie, 0);
+			pcie->cfg->bridge_sw_init_set(pcie, 0);
 			return ret;
 		}
 	}
@@ -1052,7 +1047,7 @@ static int brcm_pcie_setup(struct brcm_p
 	usleep_range(100, 200);
 
 	/* Take the bridge out of reset */
-	ret = pcie->bridge_sw_init_set(pcie, 0);
+	ret = pcie->cfg->bridge_sw_init_set(pcie, 0);
 	if (ret)
 		return ret;
 
@@ -1072,9 +1067,9 @@ static int brcm_pcie_setup(struct brcm_p
 	 */
 	if (is_bmips(pcie))
 		burst = 0x1; /* 256 bytes */
-	else if (pcie->soc_base == BCM2711)
+	else if (pcie->cfg->soc_base == BCM2711)
 		burst = 0x0; /* 128 bytes */
-	else if (pcie->soc_base == BCM7278)
+	else if (pcie->cfg->soc_base == BCM7278)
 		burst = 0x3; /* 512 bytes */
 	else
 		burst = 0x2; /* 512 bytes */
@@ -1199,7 +1194,7 @@ static void brcm_extend_rbus_timeout(str
 	u32 timeout_us = 4000000; /* 4 seconds, our setting for L1SS */
 
 	/* 7712 does not have this (RGR1) timer */
-	if (pcie->soc_base == BCM7712)
+	if (pcie->cfg->soc_base == BCM7712)
 		return;
 
 	/* Each unit in timeout register is 1/216,000,000 seconds */
@@ -1281,7 +1276,7 @@ static int brcm_pcie_start_link(struct b
 		brcm_pcie_set_gen(pcie, pcie->gen);
 
 	/* Unassert the fundamental reset */
-	ret = pcie->perst_set(pcie, 0);
+	ret = pcie->cfg->perst_set(pcie, 0);
 	if (ret)
 		return ret;
 
@@ -1465,12 +1460,12 @@ static int brcm_phy_cntl(struct brcm_pci
 
 static inline int brcm_phy_start(struct brcm_pcie *pcie)
 {
-	return pcie->has_phy ? brcm_phy_cntl(pcie, 1) : 0;
+	return pcie->cfg->has_phy ? brcm_phy_cntl(pcie, 1) : 0;
 }
 
 static inline int brcm_phy_stop(struct brcm_pcie *pcie)
 {
-	return pcie->has_phy ? brcm_phy_cntl(pcie, 0) : 0;
+	return pcie->cfg->has_phy ? brcm_phy_cntl(pcie, 0) : 0;
 }
 
 static int brcm_pcie_turn_off(struct brcm_pcie *pcie)
@@ -1481,7 +1476,7 @@ static int brcm_pcie_turn_off(struct brc
 	if (brcm_pcie_link_up(pcie))
 		brcm_pcie_enter_l23(pcie);
 	/* Assert fundamental reset */
-	ret = pcie->perst_set(pcie, 1);
+	ret = pcie->cfg->perst_set(pcie, 1);
 	if (ret)
 		return ret;
 
@@ -1584,7 +1579,7 @@ static int brcm_pcie_resume_noirq(struct
 		goto err_reset;
 
 	/* Take bridge out of reset so we can access the SERDES reg */
-	pcie->bridge_sw_init_set(pcie, 0);
+	pcie->cfg->bridge_sw_init_set(pcie, 0);
 
 	/* SERDES_IDDQ = 0 */
 	tmp = readl(base + HARD_DEBUG(pcie));
@@ -1805,12 +1800,7 @@ static int brcm_pcie_probe(struct platfo
 	pcie = pci_host_bridge_priv(bridge);
 	pcie->dev = &pdev->dev;
 	pcie->np = np;
-	pcie->reg_offsets = data->offsets;
-	pcie->soc_base = data->soc_base;
-	pcie->perst_set = data->perst_set;
-	pcie->bridge_sw_init_set = data->bridge_sw_init_set;
-	pcie->has_phy = data->has_phy;
-	pcie->num_inbound_wins = data->num_inbound_wins;
+	pcie->cfg = data;
 
 	pcie->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pcie->base))
@@ -1845,7 +1835,7 @@ static int brcm_pcie_probe(struct platfo
 	if (ret)
 		return dev_err_probe(&pdev->dev, ret, "could not enable clock\n");
 
-	pcie->bridge_sw_init_set(pcie, 0);
+	pcie->cfg->bridge_sw_init_set(pcie, 0);
 
 	if (pcie->swinit_reset) {
 		ret = reset_control_assert(pcie->swinit_reset);
@@ -1884,7 +1874,8 @@ static int brcm_pcie_probe(struct platfo
 		goto fail;
 
 	pcie->hw_rev = readl(pcie->base + PCIE_MISC_REVISION);
-	if (pcie->soc_base == BCM4908 && pcie->hw_rev >= BRCM_PCIE_HW_REV_3_20) {
+	if (pcie->cfg->soc_base == BCM4908 &&
+	    pcie->hw_rev >= BRCM_PCIE_HW_REV_3_20) {
 		dev_err(pcie->dev, "hardware revision with unsupported PERST# setup\n");
 		ret = -ENODEV;
 		goto fail;
@@ -1904,7 +1895,8 @@ static int brcm_pcie_probe(struct platfo
 		}
 	}
 
-	bridge->ops = pcie->soc_base == BCM7425 ? &brcm7425_pcie_ops : &brcm_pcie_ops;
+	bridge->ops = pcie->cfg->soc_base == BCM7425 ?
+				&brcm7425_pcie_ops : &brcm_pcie_ops;
 	bridge->sysdata = pcie;
 
 	platform_set_drvdata(pdev, pcie);