difos/target/linux/ath79/dts/qca9557_fortinet_fap-221-c.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "qca955x.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/mtd/partitions/uimage.h>

/ {
	compatible = "fortinet,fap-221-c", "qca,qca9557";
	model = "Fortinet FAP-221-C";

	aliases {
		led-boot = &led_power;
		led-failsafe = &led_power;
		led-running = &led_power;
		led-upgrade = &led_power;
	};

	chosen {
		bootargs = "console=ttyS0,9600";
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
			linux,code = <KEY_RESTART>;
		};
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&enable_gpio_2_3 &jtag_disable_pins>;

		led_power: power_green {
			function = LED_FUNCTION_POWER;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
			default-state = "on";
		};

		wifi1_green {
			function = LED_FUNCTION_WLAN_2GHZ;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy1tpt";
		};

		wifi1_amber {
			function = LED_FUNCTION_WLAN_2GHZ;
			color = <LED_COLOR_ID_AMBER>;
			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
		};

		wifi2_green {
			function = LED_FUNCTION_WLAN_5GHZ;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy0tpt";
		};

		wifi2_amber {
			function = LED_FUNCTION_WLAN_5GHZ;
			color = <LED_COLOR_ID_AMBER>;
			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
		};

		warning_green {
			function = "warning";
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
		};

		warning_amber {
			function = "warning";
			color = <LED_COLOR_ID_AMBER>;
			gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
		};

		lan_green {
			function = LED_FUNCTION_LAN;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
		};
	};

	virtual_flash {
		compatible = "mtd-concat";

		devices = <&fwconcat0 &fwconcat1 &fwconcat2>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				compatible = "openwrt,uimage", "denx,uimage";
				openwrt,ih-magic = <0x73714f4b>;
				label = "firmware";
				reg = <0x0 0x0>;
			};
		};
	};
};

&pinmux {
	enable_gpio_2_3: pinmux_enable_gpio_2_3 {
		pinctrl-single,bits = <0x00 0x0  0xffff0000>;
	};
};

&spi {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <40000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			uboot: partition@0 {
				label = "u-boot";
				reg = <0x000000 0x040000>;
				read-only;

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					macaddr_uboot_3ff80: mac-address@3ff80 {
						compatible = "mac-base";
						reg = <0x3ff80 0xc>;
						#nvmem-cell-cells = <1>;
					};
				};
			};

			fwconcat0: partition@40000 {
				label = "fwconcat0";
				reg = <0x0040000 0x1400000>;
			};

			partition@1440000 {
				label = "loader";
				reg = <0x1440000 0x0010000>;
			};

			fwconcat1: partition@145000 {
				label = "fwconcat1";
				reg = <0x1450000 0x03f0000>;
			};

			fwconcat2: partition@1840000 {
				label = "reserved";
				reg = <0x1840000 0x07b0000>;
			};

			art: partition@1ff0000 {
				label = "art";
				reg = <0x1ff0000 0x0010000>;
				read-only;
			};
		};
	};
};

&mdio0 {
	status = "okay";

	phy5: ethernet-phy@5 {
		reg = <5>;
	};
};

&eth0 {
	status = "okay";
	nvmem-cells = <&macaddr_uboot_3ff80 0>;
	nvmem-cell-names = "mac-address";

	phy-handle = <&phy5>;
	phy-mode = "rgmii-id";

	pll-data = <0x82000000 0x80000101 0x80001313>;
};

&wmac {
	status = "okay";

	nvmem-cells = <&calibration_wmac>, <&macaddr_uboot_3ff80 1>;
	nvmem-cell-names = "calibration", "mac-address";
};

&pcie0 {
	status = "okay";

	wifi@0,0,0 {
		compatible = "qcom,ath10k";
		reg = <0x0 0 0 0 0>;
		nvmem-cells = <&calibration_pcie>, <&macaddr_uboot_3ff80 2>;
		nvmem-cell-names = "calibration", "mac-address";
	};
};

&art {
	  nvmem-layout {
		  compatible = "fixed-layout";
		  #address-cells = <1>;
		  #size-cells = <1>;

		  calibration_wmac: calibration@1000 {
			  reg = <0x1000 0x440>;
		  };

		  calibration_pcie: calibration@5000 {
			  reg = <0x5000 0x844>;
		  };
	  };
};