difos/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-db149.dts

#include "qcom-ipq8064-v1.0.dtsi"

/ {
	model = "Qualcomm IPQ8064/DB149";
	compatible = "qcom,ipq8064-db149", "qcom,ipq8064";

	aliases {
		serial0 = &gsbi2_serial;
	};

	reserved-memory {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		rsvd@41200000 {
			reg = <0x41200000 0x300000>;
			no-map;
		};
	};
};

&qcom_pinmux {
	rgmii0_pins: rgmii0_pins {
		mux {
			pins = "gpio2", "gpio66";
			drive-strength = <8>;
			bias-disable;
		};
	};
};

&gsbi2 {
	qcom,mode = <GSBI_PROT_I2C_UART>;
	status = "okay";

	gsbi2_serial: serial@12490000 {
		status = "okay";
	};
};

&gsbi4 {
	status = "disabled";
};

&gsbi4_serial {
	status = "disabled";
};

&flash {
	m25p,fast-read;

	partition@0 {
		label = "lowlevel_init";
		reg = <0x0 0x1b0000>;
	};

	partition@1 {
		label = "u-boot";
		reg = <0x1b0000 0x80000>;
	};

	partition@2 {
		label = "u-boot-env";
		reg = <0x230000 0x40000>;
	};

	partition@3 {
		label = "caldata";
		reg = <0x270000 0x40000>;
	};

	partition@4 {
		label = "firmware";
		reg = <0x2b0000 0x1d50000>;
	};
};

&hs_phy_0 {
	status = "okay";
};

&ss_phy_0 {
	status = "okay";
};

&usb3_0 {
	status = "okay";
};

&hs_phy_1 {
	status = "okay";
};

&ss_phy_1 {
	status = "okay";
};

&usb3_1 {
	status = "okay";
};

&pcie0 {
	status = "okay";
};

&pcie1 {
	status = "okay";
};

&pcie2 {
	status = "okay";
};

&mdio0 {
	status = "okay";

	pinctrl-0 = <&mdio0_pins>;
	pinctrl-names = "default";

	switch@10 {
		compatible = "qca,qca8337";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x10>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				label = "cpu";
				ethernet = <&gmac0>;
				phy-mode = "rgmii";
				tx-internal-delay-ps = <1000>;
				rx-internal-delay-ps = <1000>;

				fixed-link {
					speed = <1000>;
					full-duplex;
				};
			};

			port@1 {
				reg = <1>;
				label = "lan4";
				phy-mode = "internal";
				phy-handle = <&phy_port1>;
			};

			port@2 {
				reg = <2>;
				label = "lan3";
				phy-mode = "internal";
				phy-handle = <&phy_port2>;
			};

			port@3 {
				reg = <3>;
				label = "lan2";
				phy-mode = "internal";
				phy-handle = <&phy_port3>;
			};

			port@4 {
				reg = <4>;
				label = "lan1";
				phy-mode = "internal";
				phy-handle = <&phy_port4>;
			};

			port@5 {
				reg = <5>;
				label = "wan";
				phy-mode = "internal";
				phy-handle = <&phy_port5>;
			};

			/*
			port@6 {
				reg = <0>;
				label = "cpu";
				ethernet = <&gmac2>;
				phy-mode = "rgmii";

				fixed-link {
					speed = <1000>;
					full-duplex;
					pause;
					asym-pause;
				};
			};
			*/
		};

		mdio {
			#address-cells = <1>;
			#size-cells = <0>;

			phy_port1: phy@0 {
				reg = <0>;
			};

			phy_port2: phy@1 {
				reg = <1>;
			};

			phy_port3: phy@2 {
				reg = <2>;
			};

			phy_port4: phy@3 {
				reg = <3>;
			};

			phy_port5: phy@4 {
				reg = <4>;
			};
		};
	};

	phy6: ethernet-phy@6 {
		reg = <6>;
	};

	phy7: ethernet-phy@7 {
		reg = <7>;
	};
};

&gmac0 {
	status = "okay";
	phy-mode = "rgmii";
	qcom,id = <0>;

	pinctrl-0 = <&rgmii0_pins>;
	pinctrl-names = "default";
};

&gmac1 {
	status = "okay";
	phy-mode = "sgmii";
	qcom,id = <1>;

	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&gmac2 {
	status = "okay";
	phy-mode = "sgmii";
	qcom,id = <2>;
	phy-handle = <&phy6>;
};

&gmac3 {
	status = "okay";
	phy-mode = "sgmii";
	qcom,id = <3>;
	phy-handle = <&phy7>;
};