// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "rtl8393_hpe_1920.dtsi"

/ {
	compatible = "hpe,1920-48g-poe", "realtek,rtl8393-soc";
	model = "HPE 1920-48G-PoE (JG928A)";

	gpio_fan_array {
		compatible = "gpio-fan";

		gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
		gpio-fan,speed-map =    <5000 0>,
					<8200 1>;

		alarm-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
		#cooling-cells = <2>;
	};

        i2c0: i2c-gpio-0 {
                compatible = "i2c-gpio";
                sda-gpios = <&gpio1 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
                scl-gpios = <&gpio1 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
                i2c-gpio,delay-us = <2>;
                #address-cells = <1>;
                #size-cells = <0>;
        };

        sfp0: sfp-p49 {
                compatible = "sff,sfp";
                i2c-bus = <&i2c0>;
                los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
                mod-def0-gpio = <&gpio1 21 GPIO_ACTIVE_LOW>;
                // tx-fault unconnected (TODO?)
                // tx-disable connected to RTL8214FC (TODO?)
        };

        i2c1: i2c-gpio-1 {
                compatible = "i2c-gpio";
                sda-gpios = <&gpio1 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
                scl-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
                i2c-gpio,delay-us = <2>;
                #address-cells = <1>;
                #size-cells = <0>;
        };

        sfp1: sfp-p50 {
                compatible = "sff,sfp";
                i2c-bus = <&i2c1>;
                los-gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
                mod-def0-gpio = <&gpio1 25 GPIO_ACTIVE_LOW>;
                // tx-fault unconnected (TODO?)
                // tx-disable connected to RTL8214FC (TODO?)
        };

        i2c2: i2c-gpio-2 {
                compatible = "i2c-gpio";
                sda-gpios = <&gpio1 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
                scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
                i2c-gpio,delay-us = <2>;
                #address-cells = <1>;
                #size-cells = <0>;
        };

        sfp2: sfp-p51 {
                compatible = "sff,sfp";
                i2c-bus = <&i2c2>;
                los-gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
                mod-def0-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
                // tx-fault unconnected (TODO?)
                // tx-disable connected to RTL8214FC (TODO?)
        };

        i2c3: i2c-gpio-3 {
                compatible = "i2c-gpio";
                sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
                scl-gpios = <&gpio1 32 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
                i2c-gpio,delay-us = <2>;
                #address-cells = <1>;
                #size-cells = <0>;
        };

        sfp3: sfp-p52 {
                compatible = "sff,sfp";
                i2c-bus = <&i2c3>;
                los-gpio = <&gpio1 34 GPIO_ACTIVE_HIGH>;
                mod-def0-gpio = <&gpio1 33 GPIO_ACTIVE_LOW>;
                // tx-fault unconnected (TODO?)
                // tx-disable connected to RTL8214FC (TODO?)
        };
};

&ethernet0 {
        mdio: mdio-bus {
		EXTERNAL_SFP_PHY_FULL(48, 0)
		EXTERNAL_SFP_PHY_FULL(49, 1)
		EXTERNAL_SFP_PHY_FULL(50, 2)
		EXTERNAL_SFP_PHY_FULL(51, 3)
	};
};


&switch0 {
	ports {
		SWITCH_PORT(48, 49, qsgmii)
		SWITCH_PORT(49, 50, qsgmii)
		SWITCH_PORT(50, 51, qsgmii)
		SWITCH_PORT(51, 52, qsgmii)
	};
};

&uart1 {
	status = "okay";
};

&mdio_aux {
	status = "okay";

	gpio1: expander@0 {
		compatible = "realtek,rtl8231";
		reg = <0>;

		gpio-controller;
		#gpio-cells = <2>;
		gpio-ranges = <&gpio1 0 0 37>;

		led-controller {
			compatible = "realtek,rtl8231-leds";
			status = "disabled";
		};
	};
};