// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

#include "mt7981b.dtsi"

/ {
	model = "TP-Link FR365 v1";
	compatible = "tplink,fr365-v1", "mediatek,mt7981";

	aliases {
		serial0 = &uart0;
		led-boot = &led_status;
		led-failsafe = &led_status;
		led-running = &led_status;
		led-upgrade = &led_status;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	memory {
		reg = <0 0x40000000 0 0x20000000>;
	};

	gpio-keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			linux,code = <KEY_RESTART>;
			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led_status: led_status {
			function = LED_FUNCTION_STATUS;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&pio 4 GPIO_ACTIVE_LOW>;
		};

		led_usb: led_usb {
			function = LED_FUNCTION_USB;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
		};

		led_sfp: led_sfp {
			label = "green:sfp";
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&pio 5 GPIO_ACTIVE_LOW>;
		};

		led_wlan: led_wlan {
			function = LED_FUNCTION_WLAN;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&pio 34 GPIO_ACTIVE_LOW>;
		};

		led_port2_act: led_port2_act {
			label = "green:port2_act";
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&pio 8 GPIO_ACTIVE_LOW>;
		};

		led_port2_linespeed: led_port2_linespeed {
			label = "green:port2_linespeed";
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&pio 13 GPIO_ACTIVE_LOW>;
		};
	};

	usb_vbus: regulator-usb-vbus {
		compatible = "regulator-fixed";
		regulator-name = "usb_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		regulator-boot-on;
	};

	sfp1: sfp-1 {
		compatible = "sff,sfp";
		i2c-bus = <&i2c0>;
		los-gpios = <&pio 11 GPIO_ACTIVE_HIGH>;
		mod-def0-gpios = <&pio 0 GPIO_ACTIVE_LOW>;
		maximum-power-milliwatt = <3000>;
		tx-disable-gpios = <&pio 10 GPIO_ACTIVE_HIGH>;
	};
};

&eth {
	status = "okay";

	gmac0: mac@0 {
		compatible = "mediatek,eth-mac";
		reg = <0>;
		phy-mode = "2500base-x";

		fixed-link {
			speed = <2500>;
			full-duplex;
		};
	};

	gmac1: mac@1 {
		compatible = "mediatek,eth-mac";
		reg = <1>;
		phy-mode = "gmii";
		phy-handle = <&int_gbe_phy>;
		label = "port2";
	};
};

&mdio_bus {
	switch: switch@1f {
		compatible = "mediatek,mt7531";
		reg = <31>;
		reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
		interrupt-controller;
		#interrupt-cells = <1>;
		interrupt-parent = <&pio>;
		interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
	};
};

&spi0 {
	pinctrl-names = "default";
	pinctrl-0 = <&spi0_flash_pins>;
	status = "okay";

	spi_nand@0 {
		compatible = "spi-nand";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0>;

		spi-max-frequency = <52000000>;
		spi-tx-bus-width = <4>;
		spi-rx-bus-width = <4>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "bl2";
				reg = <0x0000000 0x0100000>;
				read-only;
			};

			partition@100000 {
				label = "u-boot-env";
				reg = <0x0100000 0x0080000>;
			};

			partition@180000 {
				label = "Factory";
				reg = <0x0180000 0x0200000>;
				read-only;
			};

			partition@380000 {
				label = "fip";
				reg = <0x0380000 0x0200000>;
				read-only;
			};

			partition@580000 {
				label = "ubi";
				reg = <0x0580000 0x2400000>;
				compatible = "linux,ubi";

				volumes {
					ubi_rootdisk: ubi-volume-fit {
						volname = "kernel";
					};
				};
			};

			partition@2980000 {
				label = "ubi.b";
				reg = <0x2980000 0x2400000>;

				volumes {
					ubi_rootdisk_2: ubi-volume-fit {
						volname = "kernel";
					};
				};
			};

			partition@4d80000 {
				label = "support-list";
				reg = <0x4d80000 0x0020000>;
				read-only;
			};

			partition@4da0000 {
				label = "user-config";
				reg = <0x4da0000 0x0a00000>;
				read-only;
			};

			partition@57a0000 {
				label = "partition-table";
				reg = <0x57a0000 0x0020000>;
				read-only;
			};

			partition@57c0000 {
				label = "device-info";
				reg = <0x57c0000 0x0020000>;
				read-only;
			};

			partition@57e0000 {
				label = "device-info.b";
				reg = <0x57e0000 0x0020000>;
				read-only;
			};

			partition@5800000 {
				label = "tddp";
				reg = <0x5800000 0x0020000>;
				read-only;
			};

			partition@5820000 {
				label = "tddp.b";
				reg = <0x5820000 0x0020000>;
				read-only;
			};

			partition@5840000 {
				label = "extra-para-ubi";
				reg = <0x5840000 0x0200000>;
			};

			partition@5a40000 {
				label = "firmware-info";
				reg = <0x5a40000 0x0020000>;
				read-only;
			};

			partition@5a60000 {
				label = "firmware-info.b";
				reg = <0x5a60000 0x0020000>;
				read-only;
			};

			partition@5a80000 {
				label = "log";
				reg = <0x5a80000 0x0200000>;
				read-only;
			};

			partition@5c80000 {
				label = "log.b";
				reg = <0x5c80000 0x0200000>;
				read-only;
			};

			partition@5e80000 {
				label = "wlan";
				reg = <0x5e80000 0x0500000>;
				read-only;
			};

			partition@6380000 {
				label = "wlan.b";
				reg = <0x6380000 0x0500000>;
				read-only;
			};

			partition@6880000 {
				label = "database";
				reg = <0x6880000 0x1100000>;
				read-only;
			};

			partition@7980000 {
				label = "log_recovery";
				reg = <0x7980000 0x0080000>;
				read-only;
			};

			partition@7a00000 {
				label = "panic-oops";
				reg = <0x7a00000 0x0080000>;
				read-only;
			};
		};
	};
};

&switch {
	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
			reg = <0>;
			label = "port3";
		};

		port@1 {
			reg = <1>;
			label = "port4";
		};

		port@2 {
			reg = <2>;
			label = "port5";
		};

		port@3 {
			reg = <3>;
			label = "port6";
		};

		port@5 {
			reg = <5>;
			label = "port1";
			phy-mode = "2500base-x";
			managed = "in-band-status";
			sfp = <&sfp1>;
		};

		port@6 {
			reg = <6>;
			ethernet = <&gmac0>;
			phy-mode = "2500base-x";

			fixed-link {
				speed = <2500>;
				full-duplex;
			};
		};
	};
};

&pio {
	i2c0_pins: i2c0-pins {
		mux {
			function = "i2c";
			groups = "i2c0_1";
		};
	};

	spi0_flash_pins: spi0-pins {
		mux {
			function = "spi";
			groups = "spi0", "spi0_wp_hold";
		};

		conf-pu {
			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
			drive-strength = <8>;
			mediatek,pull-up-adv = <0>; /* bias-disable */
		};

		conf-pd {
			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
			drive-strength = <8>;
			mediatek,pull-up-adv = <0>; /* bias-disable */
		};
	};
};

&i2c0 {
	pinctrl-names = "default";
	clock-frequency = <400000>;
	pinctrl-0 = <&i2c0_pins>;
	status = "okay";
};

&uart0 {
	status = "okay";
};

&watchdog {
	status = "okay";
};

&xhci {
	status = "okay";
	vbus-supply = <&usb_vbus>;
	mediatek,u3p-dis-msk = <0x01>;
};

&usb_phy {
	status = "okay";
};

&wifi {
	status = "okay";
};