From 763693bb98ba47d2b21e4128cf761dd9ceb74041 Mon Sep 17 00:00:00 2001 From: Kieran Bingham Date: Wed, 23 Apr 2025 12:50:28 +0100 Subject: [PATCH] overlays: README: Fix 4 lane CSI2 documentation for Pi5 Several cameras can be connected that support 4 data lane operation. Fix the documentation to reflect these apply to Pi5 and CM5. This fixes the documentation for: imx258, imx290, and imx327. Signed-off-by: Kieran Bingham --- arch/arm/boot/dts/overlays/README | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/arch/arm/boot/dts/overlays/README +++ b/arch/arm/boot/dts/overlays/README @@ -2757,7 +2757,7 @@ Params: rotation Mounting Compute Module (CSI0, i2c_vc, and cam0_reg). vcm Configure a VCM focus drive on the sensor. 4lane Enable 4 CSI2 lanes. This requires a Compute - Module (1, 3, or 4). + Module (1, 3, 4, or 5) or Pi 5. Name: imx290 @@ -2766,7 +2766,7 @@ Info: Sony IMX290 camera module. variants. Load: dtoverlay=imx290, Params: 4lane Enable 4 CSI2 lanes. This requires a Compute - Module (1, 3, or 4). + Module (1, 3, 4, or 5) or Pi 5. clock-frequency Sets the clock frequency to match that used on the board. Modules from Vision Components use 37.125MHz @@ -2809,7 +2809,7 @@ Info: Sony IMX327 camera module. variants. Load: dtoverlay=imx327, Params: 4lane Enable 4 CSI2 lanes. This requires a Compute - Module (1, 3, or 4). + Module (1, 3, 4, or 5) or Pi 5. clock-frequency Sets the clock frequency to match that used on the board. Modules from Vision Components use 37.125MHz