Trim unnecessary 0s to fix the following dtc warnings:
../dts/mt7981b-cudy-re3000-v1.dts:135.20-139.6: Warning (unit_address_format): /soc/spi@11009000/flash@0/partitions/partition@00000: unit name should not have leading 0s
../dts/mt7981b-cudy-wr3000-v1.dts:153.20-157.6: Warning (unit_address_format): /soc/spi@11009000/flash@0/partitions/partition@00000: unit name should not have leading 0s
../dts/mt7981b-gatonetworks-gdsp.dts:276.20-280.6: Warning (unit_address_format): /soc/spi@11009000/flash@0/partitions/partition@00000: unit name should not have leading 0s
mt7988a-rfb-spim-nor.dtso:36.21-39.7: Warning (unit_address_format): /fragment@0/__overlay__/flash@0/partition@00000: unit name should not have leading 0s
../dts/mt7981a-ubnt-unifi-6-plus.dts:113.28-131.6: Warning (unit_address_format): /soc/spi@11009000/flash@0/partitions/partition@00000: unit name should not have leading 0s
../dts/mt7981b-wavlink-wl-wn586x3.dts:147.20-151.6: Warning (unit_address_format): /soc/spi@11009000/flash@0/partitions/partition@00000: unit name should not have leading 0s
../dts/mt7981b-wavlink-wl-wn573hx3.dts:102.20-106.6: Warning (unit_address_format): /soc/spi@11009000/flash@0/partitions/partition@00000: unit name should not have leading 0s
../dts/mt7981b-yuncore-ax835.dts:161.20-165.6: Warning (unit_address_format): /soc/spi@11009000/flash@0/partitions/partition@00000: unit name should not have leading 0s
../dts/mt7986a-zyxel-ex5601-t0-stock.dts:57.39-61.6: Warning (unit_address_format): /soc/spi@1100a000/spi_nand@0/partitions/partition@180000/nvmem-layout/macaddr@0004: unit name should not have leading 0s
../dts/mt7986a-zyxel-ex5601-t0-stock.dts:63.39-67.6: Warning (unit_address_format): /soc/spi@1100a000/spi_nand@0/partitions/partition@180000/nvmem-layout/macaddr@0024: unit name should not have leading 0s
../dts/mt7986a-zyxel-ex5601-t0-stock.dts:69.39-73.6: Warning (unit_address_format): /soc/spi@1100a000/spi_nand@0/partitions/partition@180000/nvmem-layout/macaddr@002a: unit name should not have leading 0s
../dts/mt7986a-zyxel-ex5601-t0-ubootmod.dts:56.39-60.6: Warning (unit_address_format): /soc/spi@1100a000/spi_nand@0/partitions/partition@180000/nvmem-layout/macaddr@0004: unit name should not have leading 0s
../dts/mt7986a-zyxel-ex5601-t0-ubootmod.dts:62.39-66.6: Warning (unit_address_format): /soc/spi@1100a000/spi_nand@0/partitions/partition@180000/nvmem-layout/macaddr@0024: unit name should not have leading 0s
../dts/mt7986a-zyxel-ex5601-t0-ubootmod.dts:68.39-72.6: Warning (unit_address_format): /soc/spi@1100a000/spi_nand@0/partitions/partition@180000/nvmem-layout/macaddr@002a: unit name should not have leading 0s
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Correct dts node name based on reg property to fix the
following dtc warnings:
mt7981-rfb-spim-nand.dtso:20.25-67.6: Warning (spi_bus_reg): /fragment@1/__overlay__/spi_nand@0: SPI bus unit address format error, expected "1"
mt7986a-rfb-spim-nand.dts:41.23-76.4: Warning (spi_bus_reg): /soc/spi@1100a000/spi_nand@0: SPI bus unit address format error, expected "1"
../dts/mt7981a-comfast-cf-e393ax.dts:135.23-206.4: Warning (spi_bus_reg): /soc/spi@1100a000/spi_nand@0: SPI bus unit address format error, expected "1"
../dts/mt7981b-openwrt-one.dts:305.10-342.4: Warning (spi_bus_reg): /soc/spi@1100a000/flash@0: SPI bus unit address format error, expected "1"
../dts/mt7986a-zyxel-ex5601-t0-common.dtsi:166.30-180.4: Warning (spi_bus_reg): /soc/spi@1100a000/spi_nand@0: SPI bus unit address format error, expected "1"
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Define define fb-io-fops module - Fbdev helpers for framebuffers in I/O memory
By creating a hidden module it is possible to load fb_io_fops.ko
according to the kernel version.
Fixes: 5048c9d ("kernel: modules: adjust the object files of kmod-fb ")
Package kmod-drm-radeon is missing dependencies for the following libraries:
fb_io_fops.ko
make[2]: *** [modules/video.mk:620: /__w/openwrt/openwrt/openwrt/bin/targets/x86/geode/packages/kmod-drm-radeon-6.12.28-r1.apk] Error 1
time: package/kernel/linux/compile#45.35#40.01#75.34
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/18771
Signed-off-by: Robert Marko <robimarko@gmail.com>
The "gpio-export" driver doesn't require a "reg" property in the
device tree, hence we don't need to use the "#size-cells" property
to describe the size of "reg".
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18290
Signed-off-by: Robert Marko <robimarko@gmail.com>
The re-factoring of the preinit factory partition mount script used the
incorrect mtd name for the EAP620HD and (I assume incorrect) for EAP660HD.
This corrects it to "factory_data".
Signed-off-by: Alex Thompson <thompson.alex.c@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18834
Signed-off-by: Robert Marko <robimarko@gmail.com>
rtw_ndev_notifier_call should ignore network devices created by other drivers, and it does so,
but when CONFIG_WIRELESS_EXT=n, it does not behave as expected.
Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18801
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The dependency of kmod-usb3 and kmod-usb-xhci-pci-renesas have
been reversed. Now we need to select kmod-usb-xhci-pci-renesas
instead of kmod-usb3.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18768
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The dependency of kmod-usb3 and kmod-usb-xhci-pci-renesas have
been reversed. Now we need to select kmod-usb-xhci-pci-renesas
instead of kmod-usb3.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18768
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The dependency of kmod-usb3 and kmod-usb-xhci-pci-renesas have
been reversed. Now we need to select kmod-usb-xhci-pci-renesas
instead of kmod-usb3.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18768
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Remove modifications for codes guarded by CONFIG_USB_PCI_AMD.
This kernel symbol is only visible on desktop level platform,
e.g. x86. They are not sensitive to firmware image size. This
patch also fixes function redefinition build errors:
drivers/usb/host/pci-quirks.c:621:6: error: redefinition of 'usb_asmedia_modifyflowcontrol'
621 | void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/usb/host/pci-quirks.c:22:
drivers/usb/host/pci-quirks.h:49:20: note: previous definition of 'usb_asmedia_modifyflowcontrol' with type 'void(struct pci_dev *)'
49 | static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: be6753dda0 ("generic: 6.12: manually rebuild pending patches")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18637
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
New m4 release was made after a long time, for us most importantly
it ships newer gnulib so it compiles against GCC15 without forcing GNU17.
* Noteworthy changes in release 1.4.20 (2025-05-10) [stable]
** Fix a bug in the `eval' builtin where it does not suppress warnings
about division by zero that occurs within a more complex expression on
the right hand side of || or && (present since short-circuiting was
introduced in 1.4.8b).
** The `syscmd' and `esyscmd' builtins no longer mishandle a command line
starting with `-' or `+' (present since "the beginning").
** Fix regression introduced in 1.4.19 where trace output (such as with
`debugmode(t)') could read invalid memory when tracing a series of
pushed macros that are popped during argument collection.
** Fix regression introduced in 1.4.19 where the `format' builtin
inadvertently took on locale-dependent parsing and output of floating
point numbers as a side-effect of introducing message translations.
While it would be nice for m4 to be fully locale-aware, such a behavior
change belongs in a major version release such as 1.6, and not a minor
release.
** Fix regression introduced in 1.4.11 where the experimental `changeword'
builtin could cause a crash if given a regex that does not match all
one-byte prefixes of valid longer matches. As a reminder, `changeword'
is not recommended for production use, and will likely not be present
in the next major version release.
** On non-Unix platforms where binary files differ from text, loading a
frozen file (which should be cross-platform compatible) now correctly
uses binary mode.
** Several documentation improvements to the manual.
** Update to comply with newer C standards, and inherit portability
improvements from gnulib.
Link: https://github.com/openwrt/openwrt/pull/18821
Signed-off-by: Robert Marko <robimarko@gmail.com>
CONFIG_DRM_ACCEL_QAIC was not added to x86 generic config, but it needs to
be added as CONFIG_DRM_ACCEL_QAIC does not depend on x86_64 like others.
Fixes: 51b78aa ("kernel: package intel_vpu driver")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Backport GIC ITS support for RK356x SoC, which fixes long-standing
MSI/MSI-X bug. (Previously MSI-X could only work on one PCIe node)
e.g. [ 7.250882] r8125 0002:01:00.0: no MSI/MSI-X. Back to INTx.
Tested on Radxa E25 with kmod-r8125-rss driver.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/18800
Signed-off-by: Robert Marko <robimarko@gmail.com>
Replace RK356x RNG patch with upstream version to
add the tag flag them as upstreamed.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/18800
Signed-off-by: Robert Marko <robimarko@gmail.com>
Run 'make kernel_oldconfig' to get an up-to-date config.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/18800
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently, the empty CONFIG_HOST_FLAGS_OPT will be overridden by
"-O2". Fix this issue by checking if its parent menuconfig symbol
CONFIG_OPTIMIZE_HOST_TOOLS was defined.
Fixes: e3bec5692c ("rules.mk: set default host tools GCC optimization level to -O2")
Reported-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18815
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently, when you select the Default profile it does not honor DEFAULT:=n
nor BROKEN:=y in device profiles but rather just tries to build all of them.
This may work when building directly, but when using Image Builder it will
always fail since no kernel or anything else is present for devices that
have DEFAULT:=n or BROKEN:=Y set since those are skipped during build.
So, lets look for DEFAULT being set to "n" or BROKEN being set to "y" and
then remove clear _PROFILE_SET so they dont end up being marked for
installation.
Fixes: #18410
Link: https://github.com/openwrt/openwrt/pull/18814
Signed-off-by: Robert Marko <robimarko@gmail.com>
There are NAND IC-s that define 1-bit ECC as the minimal strength,
however that is unsupported by QPIC-SNAND as it only supports 4 or 8 bit
ECC.
Since most of these chips also support 4-bit ECC just fine, instead of
erroring out if 1-bit ECC is requested lets instead default to 4-bit ECC.
Fixes: 01b72ce61e ("qualcommax: ipq50xx: remove ECC user config from board files")
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18795
Signed-off-by: Robert Marko <robimarko@gmail.com>
Update to current SSDK head for 6.12 compatibility.
We must disable warnings for missing declarations and prototypes since
whole SSDK is litered with them and actually fixing them is like doing
whack a mole.
Link: https://github.com/openwrt/openwrt/pull/18795
Signed-off-by: Robert Marko <robimarko@gmail.com>
It seems that kernel cleaned up its kernels so we need to include
<linux/of_platform.h> for of_platform_device_create().
Link: https://github.com/openwrt/openwrt/pull/18795
Signed-off-by: Robert Marko <robimarko@gmail.com>
Using devm_clk_get_enabled() allows simplification of the driver and
dropping of the .remove OP as well.
Link: https://github.com/openwrt/openwrt/pull/18795
Signed-off-by: Robert Marko <robimarko@gmail.com>
6.12 PWM core introduced a bunch of incompatible changes, namely removal
of manual module owner assignment, complete PWM struct allocation and usage
refactor, etc.
So, update the driver to follow other drivers in 6.12 so it compiles.
Link: https://github.com/openwrt/openwrt/pull/18795
Signed-off-by: Robert Marko <robimarko@gmail.com>
Refresh kernel config by running kernel_menuconfig.
Manually enable CONFIG_HW_RANDOM and CONFIG_CRYPTO_DEV_QCOM_RNG as these
got somehow disabled by the refresh.
Link: https://github.com/openwrt/openwrt/pull/18795
Signed-off-by: Robert Marko <robimarko@gmail.com>
Refresh 6.12 patches, those that failed automatic refresh were refreshed
manually.
DT bindings patches that failed were dropped as we dont use them in practice.
Link: https://github.com/openwrt/openwrt/pull/18795
Signed-off-by: Robert Marko <robimarko@gmail.com>
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Link: https://github.com/openwrt/openwrt/pull/18795
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch can help save over 60% of package build time. -O2
optimization level is the default value before the commit
e8b470139c ("tools: add options to optimize host binaries").
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18812
Signed-off-by: Robert Marko <robimarko@gmail.com>
Version 6.14 - April 7, 2025
* Feature: list PHYs (--show-phys)
* Feature: target a specific PHY with some commands (--phy)
* Feature: more attributes for C33 PSE (--show-pse, --set-pse)
* Feature: source information for cable tests (--cable-test[-tdr])
* Feature: JSON output for module info (-m)
* Feature: misc RSS hash info improvements (-x)
* Feature: tsinfo hwtstamp provider (--{get,set}-hwtimestamp-cfg)
* Fix: fix wrong auto-negotiation state (no option)
* Fix: more explicit RSS context action (-n)
* Fix: print PHY address as decimal (no option)
* Fix: fix return value on flow hashing error (-N)
* Fix: fix JSON output for IRQ coalescing
* Fix: fix MDI-X info output (no option)
* Misc: code cleanup in module parsers
* Misc: provide module_info JSON schema
* Misc: add '-j' alias for --json
* Misc: provide AppStream metainfo XML
* Misc: update message descriptions for debugging output
Signed-off-by: Piotr Kubik <piotr.kubik@adtran.com>
Signed-off-by: Chad Monroe <chad@monroe.io>
Link: https://github.com/openwrt/openwrt/pull/18803
Signed-off-by: Robert Marko <robimarko@gmail.com>
CONFIG_IDPF is Intel(R) Infrastructure Data Path Function Support and it
should be disabled by default, if needed it can be packaged as a kmod.
Disable to prevent spreading out through target configs.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Noticed that CONFIG_HISILICON_ERRATUM_162100801 was being added to
qualcommax 6.12 config.
Since we dont support any Hisilicon chips, disable it in generic config
before it starts spreading in target configs.
Signed-off-by: Robert Marko <robimarko@gmail.com>
DRM_ACCEL symbols were not added to geode and legacy thus making the kernel
prompt for them on compilation.
Fixes: 51b78aaaae ("kernel: package intel_vpu driver")
Signed-off-by: Robert Marko <robimarko@gmail.com>
RFC4541, section 2.1.2 says:
Packets with a destination IP (DIP) address in the 224.0.0.X range
which are not IGMP must be forwarded on all ports.
And section 3 says:
In IPv6, the data forwarding rules are more straight forward because
MLD is mandated for addresses with scope 2 (link-scope) or greater.
The only exception is the address FF02::1 which is the all hosts
link-scope address for which MLD messages are never sent. Packets
with the all hosts link-scope address should be forwarded on all
ports.
However, currently when a listener on FF12::1 or FF12:🔢0:1 for
example joins then not only packets to these addresses but also for
FF02::1 won't be flooded to all ports anymore, too. Which violates
RFC4541.
This happens because A): They all map to the same ethernet multicast
address, that is 33:33:00:00:00:01. And B) the VLAN profile L2
unknown MC flood setting will only apply flooding of 33:33:00:00:00:01
if there is no specific listener registered for it.
So to fix this, avoid registering an MDB entry in the switch for
33:33:00:00:00:01 at all.
The downside of this is that FF12::1, FF12:🔢0:1 etc.
will always be flooded, too. However fixing the handling of 224.0.0.X
and FF02::1 and adhering to RFC4541 must have priority to avoid
undesired packetloss, to avoid breaking IPv4/IPv6.
Tested-on: ZyXEL GS1900-24HP v1
Fixes: cde31976e3 ("realtek: Add support for Layer 2 Multicast")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Link: https://github.com/openwrt/openwrt/pull/18769
Signed-off-by: Robert Marko <robimarko@gmail.com>
Remove property 'status = "disabled"' for partitions in Zyxel NBG7815.
This option is mainly used for NAND memory and here we have SPI memory.
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18787
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fix "property has invalid length" warning for two devices:
- TP-Link EAP620 HD v1
- Zyxel NBG7815
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18787
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fixes the following warning:
[ 180.314652] NOHZ tick-stop error: local softirq work is pending, handler #08!!!
Signed-off-by: Felix Fietkau <nbd@nbd.name>
