Use the new INTERNAL_PHY_SDS() helper to describe the SFP ports. With
this change the driver now knows that ports 24/26 are driven by serdes
4/5.
For the RTL838x devices this is currently only an additional information
for the mdio bus. It is not evaluated further because everything is
hardcoded.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/18851
Signed-off-by: Robert Marko <robimarko@gmail.com>
Use the new INTERNAL_PHY_SDS() helper to describe the SFP ports. With
this change the driver now knows that ports 24/26 are driven by serdes
4/5.
For the RTL838x devices this is currently only an additional information
for the mdio bus. It is not evaluated further because everything is
hardcoded.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/18851
Signed-off-by: Robert Marko <robimarko@gmail.com>
Use the new INTERNAL_PHY_SDS() helper to describe the SFP ports. With
this change the driver now knows that ports 24/26 are driven by serdes
4/5.
For the RTL838x devices this is currently only an additional information
for the mdio bus. It is not evaluated further because everything is
hardcoded.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/18851
Signed-off-by: Robert Marko <robimarko@gmail.com>
Use the new INTERNAL_PHY_SDS() helper to describe the SFP ports. With
this change the driver now knows that ports 24/26 are driven by serdes
4/5.
For the RTL838x devices this is currently only an additional information
for the mdio bus. It is not evaluated further because everything is
hardcoded.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/18851
Signed-off-by: Robert Marko <robimarko@gmail.com>
Until now only the RTL930x devices make use of the following notation.
phy8: ethernet-phy@8 {
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
reg = <8>;
sds = <3>;
};
This indicates that the link is driven by a serdes directly without
external phy. As the devices have multiple serdes it must be clarified
what serdes is responsible for that port.
Nevertheless all other devices have the same requirements. E.g. RTL838x
usually drives port 24 from serdes 4 and port 26 from serdes 5. All this
currently works because the driver has a lot of hardcoded port/serdes
mapping.
Make the situation better by adding dts helpers that can describe the
topology as needed.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/18851
Signed-off-by: Robert Marko <robimarko@gmail.com>
OpenWrt library packages are often named using their ABI version,
for example 'libubus20250102'. Updates that cause the ABI version
to change result in changes to the package name. This makes it
impossible for downstream tools to determine when a package update
is available without further information.
The opkg package manager stores the ABI version as part of its
package metadata in the ABIVersion field. This makes extraction
of the canonical name of the package possible, allowing various
versions of a package to be associated with one another, their
versions or build dates compared.
We add a custom tag 'openwrt:abiversion=<ABI version>' to the
apk v3 package metadata, restoring the status quo and making it
functionally backwards compatible with opkg (the tag format was
selected per the guidelines in the apk-tools documentation).
Links: 1925de55be
Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19082
Signed-off-by: Robert Marko <robimarko@gmail.com>
This broke the armsr/armv8 build.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://github.com/openwrt/openwrt/pull/19200
Signed-off-by: Robert Marko <robimarko@gmail.com>
Run this script:
./scripts/kconfig-reorder.sh
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://github.com/openwrt/openwrt/pull/19200
Signed-off-by: Robert Marko <robimarko@gmail.com>
This allows the SFPs to work without manually switching port type.
Signed-off-by: Joe Holden <jwh@zorins.us>
Link: https://github.com/openwrt/openwrt/pull/18914
Signed-off-by: Robert Marko <robimarko@gmail.com>
The 4 sfp ports on the RTL8214FC are actually wired to the gpio expander instead of internal.
Relatively minor changes to the dts are required, simply overriding some of the properties
inherited from rtl8393_hpe_1920.dtsi.
The speed is reported as 100/full and the media type is incorrect, but the ports pass traffic
just fine.
Signed-off-by: Joe Holden <jwh@zorins.us>
Link: https://github.com/openwrt/openwrt/pull/18914
Signed-off-by: Robert Marko <robimarko@gmail.com>
The Qualcomm TSENS driver only exposes sensors to as a thermal
zone without registering hwmon, making these temperature sensors
unreadable by lm-sensors. This commit enables CONFIG_THERMAL and
CONFIG_THERMAL_HWMON for qualcommbe target to access the sensors
from hwmon.
Suggested-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Zheng Zhang <everything411@qq.com>
Link: https://github.com/openwrt/openwrt/pull/19137
Signed-off-by: Robert Marko <robimarko@gmail.com>
The Qualcomm TSENS driver only exposes sensors to as a thermal
zone without registering hwmon, making these temperature sensors
unreadable by lm-sensors. This commit enables CONFIG_THERMAL and
CONFIG_THERMAL_HWMON for qualcommax targets to access the sensors
from hwmon.
Suggested-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Zheng Zhang <everything411@qq.com>
Link: https://github.com/openwrt/openwrt/pull/19137
Signed-off-by: Robert Marko <robimarko@gmail.com>
In the development history of Intel's drivers, the i40evf driver was later
renamed the iavf driver. For example, some documents mention that
Intel® Network Connections Software Version 24.0 renamed the i40evf
and ixlv drivers to iavf. In subsequent versions, the i40evf driver was
gradually removed, and its functions were taken over by the iavf driver.
In the Linux system, relevant configuration instructions also exist. For
instance, the User Guide for X722 Onboard Network Card states that the
i40evf driver module should be disabled, and the iavf driver should be
installed and used.
blamed commit: 5d81b28a82
Signed-off-by: xiao bo <peterwillcn@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19197
Signed-off-by: Robert Marko <robimarko@gmail.com>
Now on Linux 6.12, stm32-dfsdm-adc also depends on
kmod-industrialio-backend.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/18740
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The stm32-dfsdm-adc module depends on it (kernel 6.12).
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/18740
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add kernel module package for Digital Camera Memory Interface Pixel
Processor (DCMIPP) support for kernel 6.12.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/18740
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The stm32 target now supports 6.12 kernel as testing.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/18740
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/18740
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The memory mapped TPM interface (TIS) can be used for
emulated or virtualized TPM instances with QEMU and
a simulation package like swtpm.
On QEMU the device will appear in the device tree
with a "tcg,tpm-tis-mmio" compatible.
For example:
qemu-system-aarch64 -machine virt -cpu max \
-bios u-boot.bin \
-nographic \
.... \
-hda openwrt-armsr-armv8-combined-efi.img \
-chardev socket,id=chrtpm,path=/tmp/mytpm/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-tis-device,tpmdev=tpm0
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Link: https://github.com/openwrt/openwrt/pull/19188
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This file is a leftover of cns3xxx target which has been dropped
in commit a9790dff53 ("cns3xxx: drop target").
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19191
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Ensure that hapd->own_addr is set properly, since hostapd_setup_bss
only handles it for secondary BSS interfaces
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add new and remove obsolete symbols for Kernel 6.12
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Link: https://github.com/openwrt/openwrt/pull/18975
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Link: https://github.com/openwrt/openwrt/pull/18975
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The patch of kernel 6.12 missing cpufreq part for
mt7988d, causing the ccifreq driver probe to fail.
Add it to avoid mt7988d devices boot hang.
Fixes: a9822e8 ("kernel/mediatek: 6.12: drop patches which have been applied upstream")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
These kernel config symbols are selected by all sub-targets. We
can merge them together to simplify the config files.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18632
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
All kernel config symbols are refreshed by `make kernel_oldconfig`.
Some symbols are moved to the generic/config-6.12 because the
refresh tool will automatically trim them.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18632
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Update to the latest version.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19143
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Change deprecated function strlcpy to strscpy
for compatibility with kernel 6.12.
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
Direct replacement is safe here since DEV_ASSIGN is only used by
TRACE macros and the return values are ignored.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/18927
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The SMP environment is prepared well for the RTL93X. Now describe the
power cluster controller in the DTS. Tested on RTL9311 based Linksys
LGS352C.
Without patch:
root@OpenWrt:~# dmesg | grep CPU
[ 0.140425] CPU1 revision is: 0001a120 (MIPS interAptiv (multi))
[ 0.191952] Synchronize counters for CPU 1: done.
[ 1.232191] CPU2: failed to start
[ 1.237863] No online CPU in core 1 to start CPU3
[ 2.273784] CPU3: failed to start
[ 2.277589] smp: Brought up 1 node, 2 CPUs
root@OpenWrt:~# cat /proc/cpuinfo | grep -E "model|proc"
processor : 0
cpu model : MIPS interAptiv (multi) V2.0
processor : 1
cpu model : MIPS interAptiv (multi) V2.0
With patch:
root@OpenWrt:~# dmesg | grep CPU
[ 0.000000] CPU0 revision is: 0001a120 (MIPS interAptiv (multi))
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Failed to get CPU clock: -2
[ 0.000000] CPU frequency from device tree: 1000MHz
[ 0.133360] smp: Bringing up secondary CPUs ...
[ 0.140418] CPU1 revision is: 0001a120 (MIPS interAptiv (multi))
[ 0.191950] Synchronize counters for CPU 1: done.
[ 0.230103] CPU2 revision is: 0001a120 (MIPS interAptiv (multi))
[ 0.289220] Synchronize counters for CPU 2: done.
[ 0.326189] CPU3 revision is: 0001a120 (MIPS interAptiv (multi))
[ 0.378861] Synchronize counters for CPU 3: done.
[ 0.413829] smp: Brought up 1 node, 4 CPUs
processor : 0
cpu model : MIPS interAptiv (multi) V2.0
processor : 1
cpu model : MIPS interAptiv (multi) V2.0
processor : 2
cpu model : MIPS interAptiv (multi) V2.0
processor : 3
cpu model : MIPS interAptiv (multi) V2.0
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/19110
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Introduced with Linux 6.7, in commit:
5c2f7727d437 ("mtd: mtdpart: check for subpartitions parsing result"),
when a parser returns an error, this will be passed up, and
consequently, all parent mtd partitions get torn down.
Adjust the mtdsplit_uimage driver to only return an error if there is a
critical problem in reading from the mtd device or allocating memory.
Otherwise return 0 to indicate that no partitions were found.
Also add logging to indicate what went wrong.
E.g. on Realtek devices that are booted for the first time through
initramfs with OpenWrt never installed before boot log will show
[ 0.975518] Creating 7 MTD partitions on "spi0.0":
[ 0.981062] 0x000000000000-0x0000000e0000 : "u-boot"
[ 1.041320] 0x0000000e0000-0x0000000f0000 : "u-boot-env"
[ 1.060683] 0x0000000f0000-0x000000100000 : "u-boot-env2"
[ 1.080992] 0x000000100000-0x000000200000 : "jffs2-cfg"
[ 1.100988] 0x000000200000-0x000000300000 : "jffs2-log"
[ 1.120599] 0x000000300000-0x000000fe0000 : "firmware"
[ 1.157426] mtdsplit_uimage: no rootfs after uImage in "firmware"
[ 1.176456] mtdsplit_uimage: no rootfs after uImage in "firmware"
[ 1.200262] 0x000000fe0000-0x000001000000 : "log"
Similar issues were fixed before with commit ade045084b
("kernel: mtdsplit_minor: return 0 if not fatal") and
c78765213e ("kernel: mtdsplit_uimage: return 0 if not fatal")
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/19163
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Due to a bug, USB is not powered on after boot on hAP ac.
This prevents extroot configurations from working as overlayfs is mounted
before USB device can be powered on. This commit fixes this by enabling USB
in devicetree.
Related discussion links:
- https://forum.openwrt.org/t/usb-power-is-off-on-boot/229007
---
Extroot configuration requires the USB to be powered on before
preinit_main/80_mount_root. Probably the simplest approach is to enable
it in the devicetree. Another approach would be to add a script into
/lib/preinit that will power on USB via /sys/class/gpio/usb-power/value
E.g.
cat /lib/preinit/79_power_on_usb
do_power_on_usb(){
echo '1' > /sys/class/gpio/usb-power/value
}
boot_hook_add preinit_main do_power_on_usb
Signed-off-by: Valeriy Manzhos <manzhos.va@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19149
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
JDCloud RE-SP-01B is a dual-band WiFi 5 router based on the MT7621AT.
Specifications:
- SoC: MediaTek MT7621AT
- RAM: 512MB DDR3
- Flash: 32MB SPI NOR
- WiFi: MediaTek MT7603EN (2.4GHz), MediaTek MT7615N (5GHz)
- Ethernet: 1x WAN, 2x LAN (Gigabit Ethernet)
- LEDs: red, blue, green (GPIO controlled)
- Button: Reset (GPIO controlled)
- eMMC: Single onboard (32GB/64GB/128GB)
- USB: 1x USB 2.0 port
MAC Address Structure:
The MAC addresses share the structure DC:D8:7C:XX:XX:XX, where:
- WAN, LAN, and 2.4GHz WiFi: same as the label MAC address.
- 5GHz WiFi: label MAC address + 0x800000.
The manufacturer writes the label MAC address at different
offsets depending on the storage version of the device:
e.g.
128GB version: &config + 0x442a
64GB version: &config + 0x4429
So `get_mac_ascii()` is used here to search for the
base label MAC address of the device.
Ref:
https://github.com/openwrt/openwrt/pull/17409#discussion_r1899674262https://github.com/immortalwrt/immortalwrt/commit/c0c480d
Flash Instruction:
A 3rd party bootloader is required to boot the image. You can
use a SOP16 test clip to burn the image/bootloader to the flash.
The official bootloader does provide a web recovery interface
which only accepts an official image. To access it, you will
need to hold the reset button and power on the device, set your
IP address to 192.168.68.2 and visit http://192.168.68.1.
Co-authored-by: Chukun Pan <amadeus@jmu.edu.cn>
Signed-off-by: Yijie Jin <jinyijie@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/17409
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
