In this new version channel 177 is supported.
Dropped patches:
[1] 001-patch-version.patch
[2] 205-ath10k-ct-silence-warning-caused-by-unsupported-retr.patch
[1] [2] 8adb310f84
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18731
Signed-off-by: Robert Marko <robimarko@gmail.com>
This additional board.d script creates the "/tmp/sysinfo/oem_name" file
and populates it with the proper OEM "supported_devices" metadata entry
to be used by the new fwtool.sh oem detection feature.
(#18554): add oem image dectection to fwtool.sh
Signed-off-by: Scott Mercer <TheRootEd24@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18656
Signed-off-by: Robert Marko <robimarko@gmail.com>
Update block NVMEM driver based on backported OF partition support.
Note the different MMC card DT binding compared to the previous
downstream solution: Instead of having a 'partitions' subnode inside
a 'block' node, the 'partitions' node now resides directly under the
node representing the card.
In order to make references to the 'boot0' or 'boot1' hw partitions
you will have to define 'partitions-boot0' or 'partitions-boot1', and
move the NVMEM layout into a partition (you may, of course, use
'fixed-partitions' for that, and cover the whole device, if needed).
See also https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/mmc/mmc-card.yaml?h=v6.13
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
On big endian platforms, scans show invalid info for WiFi 6 APs.
This commit backports patches to fix this issue.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/18717
Signed-off-by: Robert Marko <robimarko@gmail.com>
The RPi 5 Compute Module expects the same NVRAM as the one from RPi 4
on a different file.
Signed-off-by: Dave Marquard <dave-atx@users.noreply.github.com>
Link: https://github.com/openwrt/openwrt/pull/18722
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Add network config for single-port Gateworks venice boards such that the
ethernet port is the WAN port instead of the default being a LAN port.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Link: https://github.com/openwrt/openwrt/pull/18629
Signed-off-by: Robert Marko <robimarko@gmail.com>
Some DTS files have a qsgmii link mode for the CPU port. This does
not harm but it is wrong. The CPU port of the realtek switch is always
directly connected to the switch by some unknown wiring and should
therefore be described as internal. Align the wrongly defined DTS
files to the standard.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/18691
Signed-off-by: Robert Marko <robimarko@gmail.com>
- Fix order of patches (3d483a10327f was merged before 34d5a86ff7bb).
- Reorganize patch numbers now that < 6.12 patches are no longer needed.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This patch was added on linux v6.13 in order to avoid simple is_visible
functions on hwmon drivers.
See 79bc0af904
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Upstream e2015942e90a couldn't be backported to 6.6 because the following
symbols were missing:
- disable_work
- disable_work_sync
- enable_work
See e2015942e9
Upstream 34e5ededf4b8 couldn't be backported to 6.6 because the following
symbol was missing:
- pcim_iomap_region
See 34e5ededf4
Reorganize patch numbers now that < 6.12 patches are no longer needed.
The following patches still differ from upstream:
- e340bff27e63
phy_set_eee_broken symbol is missing in 6.12
https://github.com/torvalds/linux/commit/e340bff27e63
The following patches can't be backported to 6.12 due to missing symbols:
- 5e7a74b6a357
phy_disable_eee_mode symbol is missing in 6.12
https://github.com/torvalds/linux/commit/5e7a74b6a357
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
With kernel 6.11 iio-core gained a dependency to DMA_SHARED_BUFFER,
so add the appropriate dependency.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
With kernel 6.11 several mtk usb functions were moved from btusb to
btmtk, adding a usb core depdendency to btmtk (if enabled).
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Update b43-tools to the latest upstream version to fix a
compilation error with C23:
util.h:25:15: error: 'bool' cannot be defined via 'typedef'
25 | typedef _Bool bool;
| ^~~~
Changelog:
c6fc53f replace custom bool typedef with <stdbool.h>
dadf30c fix format warning in compilation
2fe10ea b43-fwdump: Fix forwarding of arguments to disassembler
Link: https://github.com/openwrt/openwrt/pull/18708
Signed-off-by: Nick Hainke <vincent@systemli.org>
libiconv 1.17 fails to compile with GCC15 when doing the host build,
luckily version 1.18 already contains the fixes required so update to it.
New in 1.18:
* Many more transliterations, in particular also of Emoji characters.
* The iconv_open function is now POSIX:2024 compliant: it recognizes a
suffix //NON_IDENTICAL_DISCARD in the 'tocode' argument, with the effect
that characters that cannot be represented in the target character set
will be silently discarded. Whereas the suffix //IGNORE in the 'tocode'
argument has the effect of discarding not only characters that cannot be
represented in the target character set, but also invalid multibyte
sequences in the input.
Accordingly, the iconvctl function accepts requests
ICONV_GET_DISCARD_INVALID, ICONV_SET_DISCARD_INVALID,
ICONV_GET_DISCARD_NON_IDENTICAL, ICONV_SET_DISCARD_NON_IDENTICAL.
* The iconv_open function and the iconv program now support multiple suffixes,
such as //TRANSLIT//IGNORE, not only one.
* GB18030 is now an alias for GB18030:2005. A new converter for GB18030:2022
is added. Since this encoding merely cleans up a few private-use-area
mappings, you can continue to use the GB18030 converter, for backward
compatibility. Its Unicode to GB18030 conversion direction has been
enhanced, to help transitioning away from PUA code points.
* When converting from/to an EBCDIC encoding, a non-standard way of
converting newlines can be requested
- at the C level, by calling iconvctl with argument ICONV_SET_FROM_SURFACE
or ICONV_SET_TO_SURFACE, or
- from the iconv program, by setting the environment variable
ICONV_EBCDIC_ZOS_UNIX to a non-empty value.
* Special support for z/OS: The iconv program adds a charset metadata tag to
its output file. (Contributed by Mike Fulton.)
* For conversions from UCS-2, UCS-4, UTF-16, UTF-32, invoking
iconv(cd,NULL,NULL,...) now preserves the byte order state.
Link: https://github.com/openwrt/openwrt/pull/18698
Signed-off-by: Robert Marko <robimarko@gmail.com>
It seems that this was required many years ago (It was added in 2012),
probably due to relying on outdated or broken libtool versions, but 1.17
uses libtool 2.4.7.
After trying building both host and target libiconv versions on Fedora and
MacOS I cannot seem to find what patch-libtool is supposed to fixup.
So, I can only presume that it is completely uneeded these days and can
be dropped.
Link: https://github.com/openwrt/openwrt/pull/18698
Signed-off-by: Robert Marko <robimarko@gmail.com>
Bump version to fix compiling with GCC14.
This fixes the following compile problem:
```
dns320l-daemon.c: In function 'main':
dns320l-daemon.c:740:18: error: implicit declaration of function 'isprint' [-Wimplicit-function-declaration]
740 | else if (isprint (optopt))
| ^~~~~~~
dns320l-daemon.c:50:1: note: include '<ctype.h>' or provide a declaration of 'isprint'
49 | #include "dns320l-daemon.h"
+++ |+#include <ctype.h>
50 |
dns320l-daemon.c:799:5: error: implicit declaration of function 'umask' [-Wimplicit-function-declaration]
799 | umask(0);
| ^~~~~
dns320l-daemon.c:864:5: error: 'return' with no value, in function returning non-void [-Wreturn-mismatch]
864 | return;
| ^~~~~~
dns320l-daemon.c:691:5: note: declared here
691 | int main(int argc, char *argv[])
| ^~~~
```
Link: https://github.com/openwrt/openwrt/pull/18688
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Update libtool to the current stable 2.5.4 release.
130-trailingslash.patch was upstream, 100 and 110 patches were
manually refreshed while rest was automatically refreshed via quilt.
Link: https://github.com/openwrt/openwrt/pull/18655
Signed-off-by: Robert Marko <robimarko@gmail.com>
Commit d7e82c78d7 added a generic kernel patch that exposes a new
symbol REALTEK_PHY_HWMON when REALTEK_PHY and HWMON are enabled. The new
symbol was added to kmod-phy-realtek, but the kmod is not used in the
realtek target.
Fixes: d7e82c78d7 ("generic: backport Realtek PHY patches from upstream")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Backport patch from upstream GCC 14 branch which fixes linking with
MIPS16 on the pistachio target.
This fixes the following link problem:
```
/builder/shared-workdir/build/staging_dir/toolchain-mipsel_24kc+24kf_gcc-14.2.0_musl/lib/gcc/mipsel-openwrt-linux-musl/14.2.0/../../../../mipsel-openwrt-linux-musl/bin/ld.bfd: ./liblua.so: undefined reference to `__mips16_ledf2'
/builder/shared-workdir/build/staging_dir/toolchain-mipsel_24kc+24kf_gcc-14.2.0_musl/lib/gcc/mipsel-openwrt-linux-musl/14.2.0/../../../../mipsel-openwrt-linux-musl/bin/ld.bfd: ./liblua.so: undefined reference to `__mips16_call_stub_df_2'
/builder/shared-workdir/build/staging_dir/toolchain-mipsel_24kc+24kf_gcc-14.2.0_musl/lib/gcc/mipsel-openwrt-linux-musl/14.2.0/../../../../mipsel-openwrt-linux-musl/bin/ld.bfd: ./liblua.so: undefined reference to `__mips16_muldf3'
```
Link: https://github.com/openwrt/openwrt/pull/18688
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This fixes the following compile problem:
```
dns320l-daemon.c: In function 'main':
dns320l-daemon.c:740:18: error: implicit declaration of function 'isprint' [-Wimplicit-function-declaration]
740 | else if (isprint (optopt))
| ^~~~~~~
dns320l-daemon.c:50:1: note: include '<ctype.h>' or provide a declaration of 'isprint'
49 | #include "dns320l-daemon.h"
+++ |+#include <ctype.h>
50 |
dns320l-daemon.c:799:5: error: implicit declaration of function 'umask' [-Wimplicit-function-declaration]
799 | umask(0);
| ^~~~~
dns320l-daemon.c:864:5: error: 'return' with no value, in function returning non-void [-Wreturn-mismatch]
864 | return;
| ^~~~~~
dns320l-daemon.c:691:5: note: declared here
691 | int main(int argc, char *argv[])
| ^~~~
```
Link: https://github.com/openwrt/openwrt/pull/18688
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This fixes the following compile problem:
```
arv7506pw11.c: In function 'show_boot_progress':
arv7506pw11.c:59:24: error: 'return' with a value, in function returning void [-Wreturn-mismatch]
59 | return 0;
| ^
arv7506pw11.c:56:6: note: declared here
56 | void show_boot_progress(int arg)
| ^~~~~~~~~~~~~~~~~~
arv7506pw11.c:71:16: error: 'return' with a value, in function returning void [-Wreturn-mismatch]
71 | return 0;
| ^
arv7506pw11.c:56:6: note: declared here
56 | void show_boot_progress(int arg)
| ^~~~~~~~~~~~~~~~~~
```
Link: https://github.com/openwrt/openwrt/pull/18688
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This fixes the following compile problem:
```
checking for asm/types.h... dsl_cpe_linux.c: In function 'DSL_CPE_ThreadInit':
dsl_cpe_linux.c:779:25: error: assignment to 'DSL_CPE_Thread_t' {aka 'int'} from 'pthread_t' {aka 'struct __pthread *'} makes integer from pointer without a cast [-Wint-conversion]
779 | pThrCntrl->tid = tid;
| ^
dsl_cpe_linux.c: In function 'DSL_CPE_ThreadDelete':
dsl_cpe_linux.c:862:44: error: passing argument 1 of 'pthread_cancel' makes pointer from integer without a cast [-Wint-conversion]
862 | switch(pthread_cancel(pThrCntrl->tid))
| ~~~~~~~~~^~~~~
| |
| DSL_CPE_Thread_t {aka int}
In file included from dsl_cpe_linux.h:35:
/builder/shared-workdir/build/staging_dir/toolchain-mips_mips32_gcc-14.2.0_musl/include/pthread.h:98:20: note: expected 'pthread_t' {aka 'struct __pthread *'} but argument is of type 'DSL_CPE_Thread_t' {aka 'int'}
98 | int pthread_cancel(pthread_t);
| ^~~~~~~~~
dsl_cpe_linux.c: In function 'DSL_CPE_ThreadIdGet':
dsl_cpe_linux.c:1123:11: error: returning 'pthread_t' {aka 'struct __pthread *'} from a function with return type 'DSL_CPE_Thread_t' {aka 'int'} makes integer from pointer without a cast [-Wint-conversion]
1123 | return pthread_self();
| ^~~~~~~~~~~~~~
```
While at it, fix also some additional build warnings.
Link: https://github.com/openwrt/openwrt/pull/18688
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Avoids some pointless boilerplate.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18675
Signed-off-by: Robert Marko <robimarko@gmail.com>
This seems to be some manual patch editing or rebasing bug.
Found with grep ' '.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18675
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fix following warnings by including the corresponding headers:
backports-6.12.6/drivers/net/wireless/ath/ath9k/hsr.c:50:6: error: no previous prototype for 'ath9k_hsr_init' [-Werror=missing-prototypes]
50 | void ath9k_hsr_init(struct ath_hw *ah)
| ^~~~~~~~~~~~~~
backports-6.12.6/drivers/net/wireless/ath/ath9k/hsr.c:165:5: error: no previous prototype for 'ath9k_hsr_disable' [-Werror=missing-prototypes]
165 | int ath9k_hsr_disable(struct ath_hw *ah)
| ^~~~~~~~~~~~~~~~~
backports-6.12.6/drivers/net/wireless/ath/ath9k/hsr.c:177:5: error: no previous prototype for 'ath9k_hsr_enable' [-Werror=missing-prototypes]
177 | int ath9k_hsr_enable(struct ath_hw *ah, int bw, int fq)
| ^~~~~~~~~~~~~~~~
backports-6.12.6/drivers/net/wireless/ath/ath9k/hsr.c:234:5: error: no previous prototype for 'ath9k_hsr_status' [-Werror=missing-prototypes]
234 | int ath9k_hsr_status(struct ath_hw *ah)
| ^~~~~~~~~~~~~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18637
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Update USB shutdown callback for the 6.12 kernel. A sprintf
overlaps issue is also fixed in this patch. Unfortunately,
there are dozens of missing-prototypes warnings so it's hard
to fix them one by one. Let's just silence them.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18637
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This patch fixes a lot of missing-prototypes warnings for the
upcoming 6.12 kernel.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18637
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Convert platform driver .remove to .remove_new to fix the
incompatible pointer type error on 6.12 kernel.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18637
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Fix mt76 build error on 6.12 kernel:
In file included from /workspaces/openwrt/build_dir/target-x86_64_musl/linux-x86_64/mt76-2025.04.11~be28ef77/mt76x0/eeprom.c:13:
/workspaces/openwrt/staging_dir/target-x86_64_musl/usr/include/mac80211-backport/asm/unaligned.h:3:15: fatal error: asm/unaligned.h: No such file or directory
3 | #include_next <asm/unaligned.h>
| ^~~~~~~~~~~~~~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18637
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Move rt2x00lib_read_eeprom() function prototype from rt2800lib.h to
rt2x00.h and make rt6352_enable_pa_pin() static to fix the missing
prototypes warnings:
/workspaces/openwrt/build_dir/target-x86_64_musl/linux-x86_64/mac80211-regular/backports-6.12.6/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c:213:5: error: no previous prototype for 'rt2x00lib_read_eeprom' [-Werror=missing-prototypes]
213 | int rt2x00lib_read_eeprom(struct rt2x00_dev *rt2x00dev)
| ^~~~~~~~~~~~~~~~~~~~~
/workspaces/openwrt/build_dir/target-x86_64_musl/linux-x86_64/mac80211-regular/backports-6.12.6/drivers/net/wireless/ralink/rt2x00/rt2800lib.c:308:6: error: no previous prototype for 'rt6352_enable_pa_pin' [-Werror=missing-prototypes]
308 | void rt6352_enable_pa_pin(struct rt2x00_dev *rt2x00dev, int enable)
| ^~~~~~~~~~~~~~~~~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18637
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
A patch was added upstream to temporary enable RTC clock configuration only
for STM32MP15 boards. Use this patch instead of reverting commit 03a581e2.
Now for STM32MP135 boards RTC clock configuration is handled by optee-os.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/18628
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
