12590 commits

Author	SHA1	Message	Date
Hauke Mehrtens	6dd2e9ae2c	brcm47xx: update the clock fixes for BCM5354 ... This updates the patches for BCM5354 to the version send for upstream Linux inclusion. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38037	2013-09-18 14:36:03 +00:00
Hauke Mehrtens	4c52ed50d7	brcm47xx: update board detection patches ... This is now the version which was send for mainline Linux kernel inclusion. The data needed to detection a board is now stored in init data. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38036	2013-09-18 14:33:54 +00:00
Hauke Mehrtens	e75ff873be	brcm47xx: add detection for Linksys E900 V1 ... Thank you Rafał for the data. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38035	2013-09-18 14:32:05 +00:00
John Crispin	1878a3d6ab	lantiq: add v3.10 patches ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38031	2013-09-17 21:46:10 +00:00
John Crispin	cd668944ef	lantiq: add wifi eep to a803 dts file ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38030	2013-09-17 21:46:04 +00:00
John Crispin	18b76c66fb	lantiq: add a subtarget for the xrx200 SoC family ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029	2013-09-17 21:46:00 +00:00
John Crispin	0782501483	lantiq: update dts files ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38027	2013-09-17 21:45:50 +00:00
John Crispin	8cd1c99707	ralink: add pinctrl driver ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38026	2013-09-17 21:45:44 +00:00
John Crispin	66bed0b019	ralink: change subtarget order ... this will make image builder build rt305x targets per default Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38025	2013-09-17 21:45:39 +00:00
Felix Fietkau	9158a08983	kernel: backport a fix for multiqueue selection to prevent tcp reordering with fair queueing ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38016	2013-09-17 10:07:52 +00:00
Hauke Mehrtens	c78e4fb220	brcm47xx: Add support for Huawei E970 ... This patch adds support for Huawei E970 wireless gateway devices. It has been tested on an E970 labelled as T-Mobile web'n'walk Box IV. E960/B970 should work too, from what I know it's basically the same hardware. The device has a Broadcom BCM5354 SoC and a built-in 3G USB modem. It uses a hardware watchdog which needs GPIO-7 to be toggled at least every 1-2 seconds. This patch uses gpio_wdt module (see my previous patch today) to take care of this. Tested and works: 3G wan, wlan+LED, VLAN config, failsafe using reset button, image to be used for upgrade from OEM firmware's web interface Link to the wiki page I've created: <http://wiki.openwrt.org/toh/huawei/e970> Issue: * lzma-loader crashes, so gzipped kernel is used. Presumably due to watchdog reset during kernel decompress. Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de> SVN-Revision: 38011	2013-09-16 21:09:10 +00:00
Hauke Mehrtens	0294358e11	kernel: add generic GPIO watchdog driver ... This is used on Huawei E970 (brcm47xx). Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de> SVN-Revision: 38010	2013-09-16 21:07:52 +00:00
Hauke Mehrtens	880be9ca2f	brcm47xx: add detection for Phicomm M1 ... Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38009	2013-09-16 19:53:09 +00:00
Hauke Mehrtens	bc5b56f42b	brcm47xx: detect Linksys E1200 V2 ... This adds detection for Linksys E1200 V2 Thank you Lightsword and Rafał. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38006	2013-09-16 19:49:02 +00:00
Hauke Mehrtens	23c34e820c	brcm47xx: mtd: bcm47xxpart: detect "factory" partition ... A new type of partition with magic FCTY was found on Huawei E970: 46 43 54 59 4b 51 37 4e 41 42 31 38 41 32 39 30 |FCTYKQ7NAB18A290| Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 38005	2013-09-16 19:47:30 +00:00
Hauke Mehrtens	f687ab2101	brcm47xx: bgmac: implement unaligned addressing for DMA rings that support it ... This is important patch for new devices that support unaligned addressing. That devices suffer from the backward-compatibility bug in DMA engine. In theory we should be able to use old mechanism, but in practice DMA address seems to be randomly copied into status register when hardware reaches end of a ring. This breaks reading slot number from status register and we can't use DMA anymore. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 38004	2013-09-16 19:46:34 +00:00
Gabor Juhos	a0d6cd4f49	kernel/3.10: add new Kconfig option for firmware partition split ... Add a new kernel config option for generic firmware partition split support and change the uImage split support to depend on the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to MTD_SPLIT_FIRMWARE_NAME to make it more generic. The patch is in preparation for multiple firmware format support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38002	2013-09-15 17:03:29 +00:00
Hauke Mehrtens	86405f2c4c	brcm47xx: add detection code for Huawei E970 ... This is based on a patch by Mathias Adam. Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38001	2013-09-15 17:00:45 +00:00
Gabor Juhos	554772a665	kernel: update 3.10 to 3.10.12 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38000	2013-09-15 16:00:41 +00:00
Hauke Mehrtens	57c6730ed6	brcm47xx: bgmac: allow bigger et_swtype nvram variable ... Without this patch it is impossible to read et_swtype, because the 1 byte space is needed for the terminating null byte. Now it should be possible to read decimal and hex vars of max 8 bit. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37999	2013-09-15 15:50:41 +00:00
Hauke Mehrtens	2693eab7fd	brcm47xx: mtd: bcm47xxpart: detect block aligned Squashfs partition ... Most of the bcm47xx devices use TRX format for storing kernel and some partition like Squashfs or JFFS2. This is pretty flexible solution, CFE (the bootloader) just writes (and later boots) TRX at some hardcoded place and paritions can vary in the size. However some devices don't use TRX format. Very recently we have discovered ZTE H218N that has kernel and rootfs partitions at some "random" places. This patch allows Linux find a rootfs partition after installing custom image with a CFE bootloader. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 37998	2013-09-15 15:47:45 +00:00
Gabor Juhos	4beccfcccb	kernel/3.10: move OpenWrt MTD options into a submenu ... Separate OpenWrt specific MTD options from the mainline option by moving those into a new submenu in the kernel configuration interface. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37997	2013-09-15 15:16:16 +00:00
Hauke Mehrtens	bd6d4c4ded	brcm47xx: update board detection patch ... * Use different structs depending on the number of nvram variables to check. * Add detection of ZTE H218N, this closes #14151. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37996	2013-09-15 15:08:29 +00:00
Hauke Mehrtens	f5989e7f59	kernel: b53: detect revision of BCM5325 ... The revision is stored in a different register than it is in other Broadcom switches. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37995	2013-09-15 13:30:49 +00:00
Hauke Mehrtens	49d7c57fd1	kernel: b53: fix vlan write for BCM5325 revison 3+ ... These switches are integrated in some recent BCM53XX and BCM47XX SoCs like the BCM53572. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37994	2013-09-15 13:29:14 +00:00
Hauke Mehrtens	c9399a1c81	brcm47xx: bgmac: fix internal switch initialization ... Some devices (BCM4749, BCM5357, BCM53572) have internal switch that requires initialization. We already have code for this, but because of the typo in code it was never working. This resulted in network not working for some routers and possibility of soft-bricking them. Use correct bit for switch initialization and fix typo in the define. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 37993	2013-09-15 09:39:19 +00:00
Hauke Mehrtens	1268e064aa	brcm47xx: detect Asus RT-N10 ... Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37989	2013-09-14 16:19:21 +00:00
Hauke Mehrtens	cde1d53625	kernel: b53: use hard coded switch reset gpio on some boards. ... The Linksys wrt310n v1 does not have a robo_reset config variable in nvram, but GPIO Pin 8 is the pin needed for resetting the external switch, Linksys hard coded it into their source code. Thank you Devastator for testing. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37988	2013-09-14 16:17:36 +00:00
Hauke Mehrtens	2da56b4ebc	kernel: b53: add soft reset for BCM539x switches ... Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37987	2013-09-14 16:14:02 +00:00
Hauke Mehrtens	3b3d4b6208	brcm47xx: tg3: use the phy address from et0phyaddr and not the default phy address. ... Thank you Devastator for testing. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37986	2013-09-14 16:10:37 +00:00
Gabor Juhos	ec5ee2f269	generic/3.10: remove unused defines from the rootfs split patch ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37981	2013-09-14 10:19:10 +00:00
Gabor Juhos	ac28225e24	generic/3.10: reduce number of ifdefs in the rootfs split code ... Use the config_enabled() macro where it is possible. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37980	2013-09-14 10:19:09 +00:00
Luka Perkov	02e858d88c	imx6: add network defaults for GW5400-A ... Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37979	2013-09-13 21:50:35 +00:00
Hauke Mehrtens	b73b915c54	brcm47xx: board detection, GPIO for Linksys E1000 V2.1 ... This patch adds board detection for the Linksys E1000 V2.1 router, as well as GPIO support for same. This fixes bug #14135. Currently, wired networking isn't working on the router, and I haven't tried the wireless, but with this patch, OpenWRT successfully boots, and all the LEDs and buttons work properly. Signed-off-by: Zachary Catlin <zcatlin@indiana.edu> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37977	2013-09-13 19:24:08 +00:00
Gabor Juhos	0aa1f0be43	ar71xx: refresh patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37976	2013-09-13 17:29:16 +00:00
Gabor Juhos	3a241f67a7	generic/3.10: refresh patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37975	2013-09-13 17:29:14 +00:00
Gabor Juhos	2d49e32715	generic/3.10: rename mtd patches ... - change patch numbers to group the related stuff together, - add mtd prefix where it is missing, - use hyphens in the patch names Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37974	2013-09-13 17:24:25 +00:00
Gabor Juhos	ad1c38fe97	cns21xx: remove 3.8 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37973	2013-09-13 16:39:36 +00:00
Gabor Juhos	c1c0d14192	cns21xx: switch to 3.10 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37972	2013-09-13 16:39:34 +00:00
Gabor Juhos	2421534612	cns21xx: add support for 3.10 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37971	2013-09-13 16:39:33 +00:00
Hauke Mehrtens	9141ab0ede	brcm47xx: detect WRT310NV1 ... Thanks Devastator for testing SVN-Revision: 37969	2013-09-13 15:56:35 +00:00
Gabor Juhos	826ef50014	cns21xx: make cns21xx-ehci a separate driver ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37968	2013-09-13 15:38:42 +00:00
Gabor Juhos	3b30bd5793	cns21xx: disable legacy PTY devices ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37967	2013-09-13 15:38:41 +00:00
Gabor Juhos	2af5facb25	cns21xx: fix broken case statement in led defaults file ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37966	2013-09-13 15:38:40 +00:00
Gabor Juhos	5e8df6f5bb	cns21xx: enable XZ_DEC_ARM and XZ_DEC_BCJ kernel options ... Squashfs is unable to decompress some blocks without that: [ 0.970000] SQUASHFS error: xz_dec_run error, data probably corrupt [ 0.980000] SQUASHFS error: squashfs_read_data failed to read block 0x29a72 [ 0.990000] SQUASHFS error: Unable to read fragment cache entry [29a72] [ 1.000000] SQUASHFS error: Unable to read page, block 29a72, size 14c50 [ 1.010000] SQUASHFS error: Unable to read fragment cache entry [29a72] [ 1.020000] SQUASHFS error: Unable to read page, block 29a72, size 14c50 [ 1.260000] SQUASHFS error: xz_dec_run error, data probably corrupt Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37965	2013-09-13 15:38:39 +00:00
Gabor Juhos	9754aca374	ar71xx: add support for TL-MR3040 v2 ... This patch adds support for building firmware images for the TP-Link TL-MR3040 v2. Tested and working on v2.1 hardware. Signed-off-by: Mads Hansen <d@taba.se> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37964	2013-09-13 15:28:50 +00:00
Gabor Juhos	897c00c145	ar71xx: add wireless bgn led support for dir-825-c1 ... I checked the GPL code drop from D-Link and tried to get the wireless and LAN switch LEDs to light up. I found some references in AthSDK/www/DIR-825_C1/bsp.h as well as AthSDK/www/DIR-825_C1/rootfs/etc/sysconfig/S2gpio.sh, but in the end I only got the led for 2.4GHz to work. Anyway, here's the patch. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37963	2013-09-13 15:01:40 +00:00
Hauke Mehrtens	0a0257d70e	brcm47xx: remove support for kernel 3.8 ... Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37959	2013-09-12 22:07:12 +00:00
Hauke Mehrtens	b4880b34ef	brcm47xx: add default config for new kernel config option ... SVN-Revision: 37958	2013-09-12 22:04:55 +00:00
Hauke Mehrtens	614e8f44bd	kernel: update bcma and ssb to wireless-testing master-2013-09-09 ... SVN-Revision: 37957	2013-09-12 22:03:45 +00:00
Luka Perkov	ed6d759f39	kernel: add support for ESMT F25L32PA with upstream submission ... Signed-off-by: Flavio Silveira <fggs@terra.com.br> SVN-Revision: 37956	2013-09-12 14:38:48 +00:00
Felix Fietkau	8eb57d0cd7	kernel: align the skb padding to power of two ... The skb is usually started by a padding which allows the protocols in the network stack to add their headers in front of the payload. The skb can be reallocated in case the preallocated padding is not large enough. This can for example happen in the function __skb_cow which will check the requested extra headroom and allocate more buffer when the requested headroom is bigger than the available one. The extra buffer is aligned again to the multiple of the NET_SKB_PAD of the target architecture. The macro used to create the multiple of the NET_SKB_PAD is written in a way which allows only values power two as alignment parameter. The currently used value of 48 bytes can not be written as n ** 2 but as 2 ** 4 + 2 ** 5. The extra buffer is therefore not always the multiple of 48 but can be 16, 64, 80, 128, 144 and so on. The generated values are also not monotonic (48 requested bytes are mapped to 80 allocated bytes and 49 requested bytes are mapped to 64 allocated bytes). These unexpected small values result in more reallocations of the buffer. This was noticed prominently during tests between two QCA9558 720 MHz devices which were connected via ethernet to PCs and had a HT40 802.11n 3x3 link between each other. The throughput PC-to-PC during iperf TCP runs increased reliable from 186 Mibit/s to 214 Mibit/s in one direction and from 195 Mibit/s to 220 Mibit/s in the other direction. This is a performance increase of ~14% just by reducing the amount of reallocations. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 37948	2013-09-11 14:30:15 +00:00
Florian Fainelli	4434bc361d	kernel: fix broken depends syntax introduced in r37933 ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37942	2013-09-11 12:45:24 +00:00
Florian Fainelli	3668004858	kernel: Fix FIQ code on VIVT CPUs (#14145) ... Backport an upstream patch to fix FIQ code on VIVT CPUs Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37940	2013-09-11 12:08:44 +00:00
Luka Perkov	2964a11933	imx6: backport ahci support ... Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37936	2013-09-10 22:26:36 +00:00
Luka Perkov	b2c852e685	imx6: add i2c retry on NAK ... Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 37935	2013-09-10 22:26:34 +00:00
Luka Perkov	460fb06e63	imx6: add gpio sysfs support ... Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 37934	2013-09-10 22:26:33 +00:00
Luka Perkov	7d73153e86	kernel: allow hwmon GSC driver for all targets ... - enable using hwmon GSC driver on all targets - add a kmod package for it Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 37933	2013-09-10 22:26:30 +00:00
Felix Fietkau	11926c2fd8	kernel: fix arch-dependent bug in hso module ... Currently, the module causes an oops at least on rt5350. These patches have been accepted upstream at: git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 37931	2013-09-10 13:47:44 +00:00
Hauke Mehrtens	f181b07af8	brcm47xx: add me as maintainer ... SVN-Revision: 37916	2013-09-07 15:46:27 +00:00
Gabor Juhos	abad211388	ar71xx: use the lzma loader for the WRT160NL ... Partition layout before: 0x000000040000-0x0000001a0000 : "kernel" 0x0000001a0000-0x0000007e0000 : "rootfs" mtd: partition "rootfs" set to be root filesystem mtd: partition "rootfs_data" created automatically, ofs=0x350000, len=0x490000 0x000000350000-0x0000007e0000 : "rootfs_data" after: 0x000000040000-0x000000140000 : "kernel" 0x000000140000-0x0000007e0000 : "rootfs" mtd: partition "rootfs" set to be root filesystem mtd: partition "rootfs_data" created automatically, ofs=0x2f0000, len=0x4f0000 0x0000002f0000-0x0000007e0000 : "rootfs_data" Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37915	2013-09-07 11:40:45 +00:00
Gabor Juhos	f346e316b4	ppc40x: remove 3.8 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37914	2013-09-07 11:34:08 +00:00
Gabor Juhos	8505ccfe74	ppc40x: switch to 3.10 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37913	2013-09-07 11:34:06 +00:00
Gabor Juhos	e9d7620196	ppc40x: add support for 3.10 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37912	2013-09-07 11:34:03 +00:00
Jonas Gorski	f8cd14921d	brcm63xx: drop linux 3.9 support ... It is EOL since quite a while, so no need to keep it around. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37911	2013-09-06 19:01:17 +00:00
Jonas Gorski	dc028776f0	brcm63xx: switch to linux 3.10 ... 3.10 is stable enough, and 3.9 is EOL since a while. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37910	2013-09-06 19:01:13 +00:00
Jonas Gorski	4b0655500a	kernel: b53: support phy ids for BCM5365 ... BCM5365 (and probably other older variants) use a different phy id, so the phy driver never attached for them. Fix this by adding the appropriate phy id to the fixup and the phy driver. Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37906	2013-09-05 20:30:34 +00:00
Imre Kaloz	445d1a8b27	Add missing symbol ... Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 37897	2013-09-05 10:08:59 +00:00
Hauke Mehrtens	4eced13a37	kernel: b53: allow access the MIB counters on BCM5365 ... b53_no_ops has no elements and b53_port_ops has one element, this makes the code access some random memory when trying to access the mib counter functions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37895	2013-09-04 16:15:10 +00:00
Gabor Juhos	07216b9f46	ar71xx: fix NetGear initramfs image names ... The '-initramfs' string is duplicated in the image names, fix it. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37892	2013-09-03 07:22:27 +00:00
Gabor Juhos	d120ec18b2	kernel: update 3.10 to 3.10.10 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37890	2013-09-02 19:12:54 +00:00
Gabor Juhos	c8cd8c94d8	ar71xx: image: reorder Image/Build/* macros ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37889	2013-09-02 19:05:58 +00:00
Gabor Juhos	1712fdd658	ar71xx: image: simplify more oneliner macros ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37888	2013-09-02 19:05:57 +00:00
Gabor Juhos	02551d3883	ar71xx: image: simplify oneliner loader macros ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37887	2013-09-02 19:05:56 +00:00
Gabor Juhos	0cdf133d20	ar71xx: image: simplify oneliner initramfs macros ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37886	2013-09-02 19:05:55 +00:00
Gabor Juhos	b125a0f6b9	ar71xx: image: simplify oneliner buildkernel macros ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37885	2013-09-02 19:05:54 +00:00
Florian Fainelli	33e7337d97	mcs814x: dlan-usb-extender: fix usbdev trigger ... Every device I connect to the USB port is detected as 2-1, not 1-1. So adjust the default setting accordingly. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37882	2013-09-02 18:25:01 +00:00
Gabor Juhos	4a11acf81b	ar71xx: optimize kernel generation ... When the squashfs and jffs2 images are generated in the same turn, the compressed kernel images are generated twice with the same parameters. Move compressed kernel generation into a separate phase to avoid that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37881	2013-09-02 18:03:39 +00:00
Gabor Juhos	0950922925	generic: remove linux version checks from myloader.c ... The myloader partition parser code uses ifdef wrappers to make the code usable on kernels below version 3.2. All targets are using kernel 3.3 at least so the wraper is not needed. Remove that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37880	2013-09-02 16:33:13 +00:00
Gabor Juhos	0ceeb6a068	ar71xx: image: dynamically generate Image/Build/Template/* macros ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37879	2013-09-02 16:10:44 +00:00
Gabor Juhos	122a61aa49	ar71xx: configure OBS4 line on TL-WR841N-v8/MR3420v2 ... It also fixes USB Power on MR3420v2. This time we took the information from the source of GPL: http://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg18970.html Confirmed and tested: https://dev.openwrt.org/ticket/13201#comment:41 Thanks to oguretsagressive for testing. Signed-off-by: Dmytro <dioptimizer@gmail.com> SVN-Revision: 37878	2013-09-02 16:09:12 +00:00
Gabor Juhos	1f007eeca1	ar71xx: remove fs_* variables from image/Makefile ... Those are not needed since we are generating the initramfs images along with the others. Remove the variables and use the template names directly. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37876	2013-09-02 09:24:59 +00:00
Gabor Juhos	e7a5947576	ar71xx: fix initramfs image generation for Cameo933x profiles ... Initramfs images are not generated for profiles which are using the squashfs-only template. Add the missing 'Image/Build/Template/squashfs-only/initramfs' to fix that. Also, 'Image/Build/Cameo933x/initramfs' uses wrong parameters for 'MkuImageLzma/initramfs' due to a misplaced commma. Remove that to fix the generated initramfs images. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37871	2013-09-02 07:42:03 +00:00
Gabor Juhos	968ed2e58a	x86/alix2: remove kernel config for 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37870	2013-09-02 07:36:46 +00:00
Gabor Juhos	5aa70d283f	x86/alix2: switch to 3.10.9 ... Taken from the 'alix2: update to LINUX_VERSION 3.10.9' patch: http://patchwork.openwrt.org/patch/3971/. Russell says in the original patch: "Initial whack at updating alix2 to a current kernel. It builds and runs without problems so far. I copied target/linux/config-3.8, target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to their 3.10 equivalents and tweaked until it built. The patches required no changes." Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37869	2013-09-02 07:36:45 +00:00
Gabor Juhos	562e76d22c	x86/alix2: add kernel config for 3.10 ... Taken from the 'alix2: update to LINUX_VERSION 3.10.9' patch: http://patchwork.openwrt.org/patch/3971/. Russell says in the original patch: "Initial whack at updating alix2 to a current kernel. It builds and runs without problems so far. I copied target/linux/config-3.8, target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to their 3.10 equivalents and tweaked until it built. The patches required no changes." The current patch contains additional configuration tweaks. Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37868	2013-09-02 07:36:44 +00:00
Gabor Juhos	11b1887c53	x86: add support for 3.10 ... Add kernel configuration and patches for Linux 3.10. Taken from the 'alix2: update to LINUX_VERSION 3.10.9' patch: http://patchwork.openwrt.org/patch/3971/. Russell says in the original patch: "Initial whack at updating alix2 to a current kernel. It builds and runs without problems so far. I copied target/linux/config-3.8, target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to their 3.10 equivalents and tweaked until it built. The patches required no changes." The current patch contains additional configuration tweaks, and the kernel patches were refreshed. Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37867	2013-09-02 07:36:40 +00:00
Luka Perkov	18a767156e	imx6: add uboot-envtools to default packages ... Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37859	2013-08-29 23:06:32 +00:00
Florian Fainelli	1e1becb174	mvebu: remove maintainer ship role ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37855	2013-08-28 16:19:59 +00:00
Felix Fietkau	999ec62da7	kernel: fix booting issues on imx23 and imx6 targets ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37854	2013-08-28 07:38:36 +00:00
Luka Perkov	ae660e85d3	imx6: disable sdma until license issues are solved ... Also, synchronize patches with upstream. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37853	2013-08-28 00:07:43 +00:00
Luka Perkov	ec52778a14	imx6: refresh 3.10 kernel config ... Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37850	2013-08-28 00:07:37 +00:00
Gabor Juhos	dd421c00a2	ar71xx: add some pending patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37849	2013-08-27 18:06:49 +00:00
Gabor Juhos	a4c2853261	kernel: don't hide the 'Warning: unable to open an initial console' message ... The 'Warning: unable to open an initial console' message indicates an error in the rootfs. Remove the patch which hides the warning. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37848	2013-08-27 12:03:01 +00:00
Gabor Juhos	012f214e6f	kernel: ensure that /dev/console exists in initramfs ... Linux expects that the /dev/console node is present in the rootfs image. Create the node in initramfs, in order to make std{in,out,err} usable even in early init process. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37846	2013-08-27 12:02:54 +00:00
Gabor Juhos	d6b4b8f612	ar71xx: don't hardwire cpu_has_dsp{,2} to zero ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37845	2013-08-27 10:48:25 +00:00
Gabor Juhos	9af6a5a88f	ar71xx: don't register USB device on WNDAP360 ... Apparently registering usb device on newest trunk causes this AP not to boot... Since there is no USB socket in that device anyway this can be simply removed (and device boots then no problem). [juhosg: - tweak subject line and description, - remove #include "dev-usb.h", - remove 'select ATH79_DEV_USB' from Kconfig] Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37844	2013-08-27 10:48:24 +00:00
Felix Fietkau	c75416292a	kernel: fixing a potential deadlock in block2mtd for kernel 3.6/3.8/3.9 ... Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 37842	2013-08-26 17:47:14 +00:00
Gabor Juhos	77e00faa33	x86/alix2: add kmod-usb2-pci to default packages ... The USB controller is sitting on the PCI bus and without the package the EHCI controller is not usable. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37835	2013-08-25 14:42:34 +00:00
Gabor Juhos	42914b0b0e	ar71xx: build factory image for DIR-505 A1 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37834	2013-08-24 10:11:53 +00:00
Gabor Juhos	f7eb3d94b9	ar71xx: allow to override kernel size in the CameoHornet profile ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37833	2013-08-24 10:11:45 +00:00
Gabor Juhos	043edd8074	kernel: update 3.10 to 3.10.9 ... Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37832	2013-08-23 17:31:04 +00:00
Gabor Juhos	6f232cba62	generic: refresh kernel configs with kconfig.pl ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37831	2013-08-23 17:31:02 +00:00
Gabor Juhos	a76371970e	ramips: remove lantiq specific patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37830	2013-08-23 17:07:28 +00:00
Gabor Juhos	9330662208	ramips: use correct image size parameter for DIR-610 A1 ... Fixes the following error: bash: line 0: [: ralink_default_fw_size_4M: integer expression expected Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37829	2013-08-23 17:07:27 +00:00
Gabor Juhos	0ebe286761	ramips: use correct parameters in the Seama template ... Fixes DIR-645 image generation errors: bash: line 0: [: wrgn39_dlob.hans_dir645: integer expression expected ... bash: wrgn39_dlob.hans_dir645 - 64: syntax error: invalid arithmetic operator (error token is ".hans_dir645 - 64") make[4]: *** [install] Error 1 Signed-off-by: Michael Lee <igvtee@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37828	2013-08-23 17:07:26 +00:00
Gabor Juhos	3afc3824ca	ramips: update the RT3883 PCI patch ... Fix the following warning: arch/mips/pci/pci-rt3883.c: In function 'rt3883_pci_probe': arch/mips/pci/pci-rt3883.c:458:4: warning: use of 'h' length modifier with 'a' type character [-Wformat] Signed-off-by: Michael Lee <igvtee@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37827	2013-08-23 17:07:25 +00:00
Gabor Juhos	2d89ba8210	kernel/3.10: backport of_pci_get_devfn function from 3.11 ... Fixes the following build error on ramips/rt3883: arch/mips/pci/pci-rt3883.c:488:3: error: implicit declaration of function \ 'of_pci_get_devfn' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors Although the function is only used by the PCI driver of the RT3883 SoC but at the moment but it might be useful for other targets as well. Signed-off-by: Michael Lee <igvtee@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37826	2013-08-23 17:07:20 +00:00
Zoltan Herpai	887ddc4192	imx23: bump kernel to 3.10.9 ... SVN-Revision: 37824	2013-08-22 19:30:46 +00:00
Zoltan Herpai	330c236833	imx23: add support for u-boot image build ... SVN-Revision: 37823	2013-08-22 19:29:07 +00:00
Felix Fietkau	3848e6a246	kernel: crashlog: Avoid out-of-bounds write ... vsnprintf returns the number of chars that would have been written, not the actual number of chars written. This can lead to crashlog_buf->len being too big which in turn can lead to get_maxlen() returning negative numbers. The length argument of kmsg_dump_get_buffer will be casted to a size_t which makes a negative input a big positive number allowing kmsg_dump_get_buffer to write out of bounds. Fix this by using vscnprintf which returns the actually written number of chars. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> SVN-Revision: 37820	2013-08-21 20:59:25 +00:00
Luka Perkov	3e28d0849e	malta: refresh configuration ... Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37819	2013-08-21 00:36:53 +00:00
Felix Fietkau	e2aa807b60	kernel: add back missing declaration in the MIPS DMA patch that broke octeon ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37811	2013-08-18 05:49:57 +00:00
Luka Perkov	4f679c1775	kernel: drop dead pwm code ... The files have last been used with 2.6.x kernel. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37810	2013-08-18 01:25:41 +00:00
Luka Perkov	a2dccb958c	kernel: drop dead glamo code ... The code is not used since the s3c24xx target was removed. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37809	2013-08-18 01:25:40 +00:00
Luka Perkov	f1509b1958	kernel: replace local m25p80 patches with upstream submission ... http://lists.infradead.org/pipermail/linux-mtd/2013-August/048154.html http://patchwork.ozlabs.org/patch/268019/ Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37808	2013-08-17 23:54:41 +00:00
Luka Perkov	18a36d3062	kernel: drop 010-mtd_mp25p80_add_gd25q32_gd25q64.patch ... The patch in question has been accepted upstream in commit: 55bf75b7dd8ec875d048824f3cdecf8254e292e5 Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37807	2013-08-17 22:29:05 +00:00
Luka Perkov	5c018d5096	kernel: drop 110-fix_mtd_include.patch ... Kernel builds just fine without this patch so we can just remove it. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37805	2013-08-17 17:09:41 +00:00
Hauke Mehrtens	af161b6576	brcm47xx: fix typo in Broadcom-bgmac-b43 profile name ... Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37803	2013-08-17 13:41:22 +00:00
Felix Fietkau	d16060d5a3	kernel: fix a small #ifdef bug in the noncoherent dma check rework ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37791	2013-08-15 09:29:53 +00:00
Felix Fietkau	e27f67b30a	kernel: improve dma ops inlining patches ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37790	2013-08-15 09:23:07 +00:00
Luka Perkov	5064c81457	ar71xx: add support for hornet-ub-x2 ... The hornet-ub-x2 is hornet-ub variant with double more flash and ram. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37788	2013-08-15 00:57:47 +00:00
John Crispin	dc7164d4ef	ramips: DIR-610-A1 Support ... http://patchwork.openwrt.org/patch/3933/ Signed-off-by: Flavio Silveira <fggs@terra.com.br> SVN-Revision: 37785	2013-08-14 19:35:27 +00:00
John Crispin	97a7daa72f	ramips: fix typo in network uci_defaults script ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37784	2013-08-14 19:08:55 +00:00
John Crispin	41f62983d3	ramips: dts file cleanup ... cleanup some inconsistencies in the dts files Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37783	2013-08-14 19:08:44 +00:00
John Crispin	eb7669fc5d	ar71xx: fix TL-WR710N board detection ... Fix for recognize TL-WR710N http://patchwork.openwrt.org/patch/3946/ Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 37782	2013-08-14 18:15:58 +00:00
John Crispin	6d7d09a126	ar71xx: Fix factory image for DIR 505 A1 ... Based on the original firmware, the file must have the tag HORNET-PACKET-DIR505A1-3, not HORNET-RT-DIR505A1-3. http://patchwork.openwrt.org/patch/3945/ Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 37781	2013-08-14 18:15:49 +00:00
John Crispin	36e3424fa5	ramips: add support for dir810l and asus rp-n53 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37780	2013-08-14 18:15:35 +00:00
John Crispin	632a3e3a79	ramips: various updates to the mt7620 dtsi file ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37779	2013-08-14 18:15:26 +00:00
John Crispin	9e5b0cc19c	ramips: update v3.10 patches ... Sync the patches with those sent upstream for v3.12. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37778	2013-08-14 18:15:15 +00:00
Felix Fietkau	8b8875b305	ocf: switch MODULE_LICENSE from BSD to "Dual BSD/GPL" to make the kernel recognize modules as GPL-compatible ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37769	2013-08-14 08:52:19 +00:00
Felix Fietkau	bbd4d4c8b8	ar71xx: ethernet: reduce tx dma ring size further to improve cache footprint ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37765	2013-08-13 10:35:10 +00:00
Felix Fietkau	3ead1e058c	kernel: add patch to inline mips dma mapping functions - reduces code size and improves performance ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37763	2013-08-12 17:26:08 +00:00
Felix Fietkau	58e049ea80	ar71xx: ethernet: reduce tx and rx DMA ring size to improve cache footprint ... 256 entries is a bit excessive, even for gigabit speeds Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37762	2013-08-12 17:26:03 +00:00
Felix Fietkau	f43b4ea962	ar71xx: ethernet: cache skb->len in the tx function to avoid accessing it again in completion ... Improves ethernet performance, especially during bridging Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37761	2013-08-12 17:26:00 +00:00
Felix Fietkau	e5fd991c6c	rtl8367: add support for configuring the VLAN FID ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37760	2013-08-12 17:25:25 +00:00
Felix Fietkau	53c3b2a193	ar71xx: fix typo ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37759	2013-08-12 12:41:53 +00:00
Felix Fietkau	f18fd5512e	ar71xx: ethernet: skip calls to netdev_completed_queue and netif_wake_queue if no tx cleanup was done ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37758	2013-08-12 11:44:35 +00:00
Felix Fietkau	81cfb9e5ed	ar71xx: ethernet: do not update the unused dev->last_rx field ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37757	2013-08-12 11:44:31 +00:00
Felix Fietkau	104ff48e25	ar71xx: add missing return statement in ethernet mtu change op ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37756	2013-08-12 11:44:28 +00:00
Luka Perkov	acb9bc0f5e	kernel: remove imx-sdma-fw because of license issues ... Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37755	2013-08-12 10:48:05 +00:00
Luka Perkov	3258334e79	imx6: use kmod-imx-sdma-fw-imx6 by default ... Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37754	2013-08-11 15:10:44 +00:00
Luka Perkov	5337af031e	imx6: fix sdma ... Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37752	2013-08-11 15:10:38 +00:00
Felix Fietkau	09f4018b2e	x86: Fix CONFIG_X86_GRUB_SERIAL="" ... With .config:CONFIG_X86_GRUB_SERIAL="" which (AFAICT) is the way to tell GRUB not to use a serial console, in target/linux/x86/image/Makefile:ifneq ($(CONFIG_X86_GRUB_SERIAL),) $(CONFIG_X86_GRUB_SERIAL) expands to `""' (a literal double double-quote), making the condition unconditionally false. This patch fixes the situation by passing CONFIG_X86_GRUB_SERIAL through qstrip before testing. Signed-off-by: Tamas TEVESZ <ice@extreme.hu> SVN-Revision: 37749	2013-08-10 18:35:29 +00:00
Felix Fietkau	7b05fe59a4	ar71xx: allow mtu > 1500 based on the configured tx/rx mtu register value ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37748	2013-08-10 15:31:38 +00:00
Florian Fainelli	007bd290ea	mcs814x: enable POSIX file locking ... opkg (and possible other tools) are currently broken as it requires file locking support enabled in the kernel. Without this results in a message like: root@OpenWrt:/etc/config# opkg update Collected errors: * opkg_conf_load: Could not lock /var/lock/opkg.lock: Permission denied. With this patch opkg is fully functional on this platform. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37745	2013-08-09 20:45:17 +00:00
John Crispin	94666dad1c	lantiq: fix TD-W8970 image generation to work with the new tool ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37727	2013-08-06 16:25:45 +00:00
John Crispin	f835cb6cc4	ar71xx: remove duplicate dir505 entry from board detection code ... https://dev.openwrt.org/ticket/14006 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37723	2013-08-06 14:12:02 +00:00
John Crispin	d13cbb04ad	lantiq: add support for tplink images to .../image/Makefile ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37722	2013-08-06 12:31:25 +00:00
John Crispin	5001afdc37	lantiq: make the split patch recognize the tplink header ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37721	2013-08-06 12:31:20 +00:00
John Crispin	7f2eaac407	lantiq: fix TDW8970.dts commandline and partition name ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37720	2013-08-06 12:31:16 +00:00
John Crispin	e993e0c2cf	lantiq: add tplink header id to sysupgrade and fix a comment ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37719	2013-08-06 12:31:10 +00:00
Luka Perkov	27fa640548	lantiq: add (incomplete) support for Aztech GR7000 ... *) can not connect to switch chip *) only one usb port is working *) wifi is not working Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37712	2013-08-06 10:17:16 +00:00
Florian Fainelli	d1914b4939	kernel: add some missing config symbols ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37710	2013-08-05 20:58:05 +00:00
Hauke Mehrtens	9d4145efe5	kernel: fix DMA error when BCM4331 is connected to BCM4706 ... The BCM4331 supports a PCIe max request size of 512 bytes and uses that, but the PCIe controller in the BCM4706 just supports 128 Bytes and that causes a DMA error for packages bigger than 126 bytes. This fixes the problem by setting the BCM4331 also to 128 Bytes. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37709	2013-08-05 16:17:05 +00:00
Gabor Juhos	9257d556c2	ramips: re-implement PCI mux ... Parallel flash access on RT3662/RT3883 based devices is broken without that. It was fixed already some time ago, but that change seems lost somewhere. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37708	2013-08-05 12:49:19 +00:00
Gabor Juhos	c80dd34924	ramips: allow to build Seama firmware images with arbitrary size ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37707	2013-08-05 12:35:22 +00:00
John Crispin	267810f73a	ar71xx: add usb modules to dir 505 profile ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37706	2013-08-05 11:08:30 +00:00
John Crispin	c83e665a2c	octeon: add a few missing symbols to the kernel config file ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37705	2013-08-05 10:42:09 +00:00
John Crispin	288adb6634	lantiq: several a803 related fixes ... based on work from Matti Laasko that he posted in the wiki Signed-off-by: John Crispin <blogic@openwrt.or SVN-Revision: 37704	2013-08-05 10:42:00 +00:00
John Crispin	553a469728	ar71xx: add support for dir 505 a1 ... this patch is based on ... -> https://forum.openwrt.org/viewtopic.php?pid=179902#p179902 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37703	2013-08-05 10:41:48 +00:00
Gabor Juhos	99a12119ca	ar71xx: fix tl-wa901nd buttons code ... This patch fixes the code of the buttons for TP-Link WA901ND. Signed-off-by: Rocco Folino <lordzen@autistici.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37696	2013-08-05 09:09:39 +00:00
Gabor Juhos	ccec78beaa	ar71xx: ubnt unifi outdoor register gpio button ... This patch register the gpio buttons for the Ubiquiti UniFi Outdoor. Signed-off-by: Rocco Folino <lordzen@autistici.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37695	2013-08-05 09:09:37 +00:00
John Crispin	f0b5e7d419	x86: change /dev/console to tty to fix job control ... Job control is turned off because it cannot obtain controlling terminal on /dev/console, so it is impossible to do any job control operation behind real x86 device (keyboard+monitor or virtualized). This patch switches /dev/console to tty devices for ash on x86 generic target. Signed-off-by: Jiri Slachta <slachta@cesnet.cz> SVN-Revision: 37693	2013-08-04 17:05:33 +00:00
Luka Perkov	f5b9555cdc	imx6: sync usb chipidea with upstream ... Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37686	2013-08-04 14:20:15 +00:00
John Crispin	db083a41cf	generic: make the module reloc pacth work on mips64 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37685	2013-08-04 13:54:42 +00:00
John Crispin	3a2040ffee	octeon: add support for the octeon mips64 SoC ... This is the SoC used be the ESR Lite made by ubnt.com Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37684	2013-08-04 13:54:32 +00:00
Luka Perkov	8a4726bca8	imx6: remove sdma binary ... SVN-Revision: 37682	2013-08-04 13:28:26 +00:00
Hauke Mehrtens	2fcaba306e	brcm47xx: change board detection for some Asus devices ... This closes #13316 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37680	2013-08-04 12:36:13 +00:00
Hauke Mehrtens	cccc9e214b	kernel: do not build FW_LOADER as a module. ... CONFIG_FW_LOADER=y is set in the generic config and our packages in packages/kernel/linux are depending on it to be compiled into the kernel. This fixes some dependency problem where kmod-r8169 misses firmware_class.ko. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37672	2013-08-04 09:41:10 +00:00
Zoltan Herpai	36cc8cc856	imx23: add missing DTS config for lradc ... Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 37663	2013-08-03 10:37:25 +00:00
Zoltan Herpai	370ad94576	imx23: add hw crypto (dcp) support ... Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 37662	2013-08-03 10:35:18 +00:00
Hauke Mehrtens	b2d2ca4bbd	kernel: add missing config options ... SVN-Revision: 37660	2013-08-02 20:13:54 +00:00
Hauke Mehrtens	219eac1856	kernel: add missing config option ... SVN-Revision: 37657	2013-08-02 16:51:47 +00:00
Hauke Mehrtens	c47a55dd0d	kernel: add missing config option ... brcm47xx does not use CONFIG_B53_SPI_DRIVER, but it could be selected if spi is build as a module Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37656	2013-08-02 16:16:23 +00:00
Jonas Gorski	3e9ad14992	kernel: ocf: add missing kernel dependencies ... OCF_CRYPTOSOFT uses both symbols form crypto_hash and crypto_blkcipher, so let it select these through kernel config. Fixes the following build error: ERROR: "crypto_alloc_ahash" [crypto/ocf/cryptosoft.ko] undefined! ERROR: "crypto_ahash_digest" [crypto/ocf/cryptosoft.ko] undefined! ERROR: "crypto_ahash_setkey" [crypto/ocf/cryptosoft.ko] undefined! make[6]: *** [__modpost] Error 1 make[5]: *** [modules] Error 2 Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37652	2013-08-01 23:04:42 +00:00
Hauke Mehrtens	290dade033	brcm47xx: switch to kernel 3.10.4 ... This uses a new switch driver. The old ADMTEK Adm6996 switch is not supported any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37650	2013-08-01 21:01:59 +00:00
Hauke Mehrtens	7e14fd55fd	brcm47xx: use lib phy when tg3 is in use ... This is untested, but probably needed to make it work with the phy lib switch driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37649	2013-08-01 20:47:55 +00:00
Hauke Mehrtens	8966b86067	kernel: b53: use devm_gpio_request_one() to request gpio ... Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37648	2013-08-01 20:46:56 +00:00
Hauke Mehrtens	2b55968f5d	brcm47xx: improve detection of Linksys WRTSL54GS ... This closes #13319 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37647	2013-08-01 19:33:59 +00:00
Hauke Mehrtens	6d7f796b52	brcm47xx: remove support for kernel 3.9 ... This is not needed any more. SVN-Revision: 37646	2013-08-01 19:17:51 +00:00
Hauke Mehrtens	e1127aca07	kernel: b53: add support for GPIO reset ... This is needed for some switches used on bcm47xx SoCs like the one on the Asus RT-N66U. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37645	2013-08-01 19:05:34 +00:00
Hauke Mehrtens	2363cb3893	brcm47xx: add function to get a gpio pin by name ... bcm47xx_nvram_gpio_pin() returns a gpio pin number for a given name based on configuration data in nvram. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37644	2013-08-01 19:04:12 +00:00
John Crispin	169e184521	ramips: add Poray IP2202 support ... Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37640	2013-08-01 14:31:15 +00:00
John Crispin	ce4228b417	ramips: add Poray X8 support ... Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37639	2013-08-01 14:31:09 +00:00
John Crispin	54968110f1	ramips: add Poray X5/X6 Support ... Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37638	2013-08-01 14:31:04 +00:00
John Crispin	0dc3b44b0d	ramips: add Poray M4 4M/8M support ... Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37637	2013-08-01 14:30:58 +00:00
John Crispin	23d3b705df	ramips: add Poray M3 support ... Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37636	2013-08-01 14:30:53 +00:00
John Crispin	aaedf6c8c6	ramips: add basics for Poray devices ... This commit adds the basic elements to support Poray brand routers. It contains a tool to do the encryption/obfuscation that is used in Poray routers. Support for Poray devices was worked on by: Felix Kaechele <heffer@fedoraproject.org> Luis Soltero <lsoltero@globalmarinenet.com> Michel Stempin <michel.stempin@wanadoo.fr> Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37635	2013-08-01 14:30:46 +00:00
John Crispin	b4c722267e	lantiq: fix VG3503J ethernet/gphy led support ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37634	2013-08-01 14:30:40 +00:00
John Crispin	046b282429	ralink: add mt7620a_mt7610e profile ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37633	2013-08-01 14:30:33 +00:00
Zoltan Herpai	9eb3572b7b	imx23: add lradc support ... Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 37632	2013-08-01 09:36:37 +00:00
Zoltan Herpai	91e8082e2d	kernel: add missing iio config symbols for 3.10 ... Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 37631	2013-08-01 06:58:08 +00:00
Hauke Mehrtens	e2b2e3886b	brcm47xx: run mtd fixtrx linux every time ... With this patch it is possible to boot a device with kernel 3.10 a second time. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37625	2013-07-31 17:41:52 +00:00
Zoltan Herpai	0a6e0228d9	imx23: add SoC sound support ... Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 37622	2013-07-31 09:52:46 +00:00
Felix Fietkau	28d03a9983	kernel: update remaning platforms accidentally left out of r37617 ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37619	2013-07-30 08:00:25 +00:00
Felix Fietkau	8f04792531	kernel: update to linux 3.10.4, refresh patches ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37617	2013-07-29 22:42:22 +00:00
John Crispin	336c94c32d	lantiq: setup gphy leds on TPlink TDW8970 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37612	2013-07-29 13:10:42 +00:00
John Crispin	c3b5ee96b9	lantiq: add gphy pinmux definitions ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37611	2013-07-29 13:10:37 +00:00
John Crispin	61e6be686f	lantiq: set sane default for phy leds ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37610	2013-07-29 13:10:32 +00:00
John Crispin	c2600d13d1	ramips: fix indenting of spi partitions inside dts files ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37609	2013-07-29 13:10:26 +00:00
Felix Fietkau	99e3616dac	kernel: add missing config symbols for 3.10 ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37602	2013-07-29 12:48:57 +00:00
Felix Fietkau	73c4d73d6d	build: unify target independent optimization options ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37600	2013-07-29 09:38:29 +00:00
Felix Fietkau	cc26f768e4	kernel: stop patching -funit-at-a-time into CFLAGS, it has no effect on recent compilers ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37598	2013-07-29 09:38:21 +00:00
Hauke Mehrtens	ad59c4e646	bcm53xx: compile b53 switch driver ... SVN-Revision: 37587	2013-07-28 22:14:55 +00:00
Hauke Mehrtens	1377916ea7	bcm53xx: update patches ... This reorders the patchs and adds some new ones. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37586	2013-07-28 22:13:52 +00:00
Hauke Mehrtens	333252e493	bcm53xx: use clocksource patch as it was committed upstream ... Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37585	2013-07-28 21:22:50 +00:00
Hauke Mehrtens	3e8c39f239	bcm53xx: add initial bgmac patches ... Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37584	2013-07-28 21:20:15 +00:00
Hauke Mehrtens	24628e4ce7	bcm53xx: activate pci and usb in kernel config ... This is not working, just compiling Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37583	2013-07-28 21:10:42 +00:00
Luka Perkov	d6a23e1ae9	imx6: update default packages ... SVN-Revision: 37582	2013-07-28 20:34:21 +00:00
Luka Perkov	a08eab3ce8	imx6: add support for EHCI USB ... SVN-Revision: 37581	2013-07-28 20:34:19 +00:00
Gabor Juhos	65584ed54f	ar71xx: add profile and build image for the WNR612 v2 board ... Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3876/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37577	2013-07-28 10:23:38 +00:00
Gabor Juhos	41d136f2c8	ar71xx: add user-space support for the WNR612 v2 board ... Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3876/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37576	2013-07-28 10:23:37 +00:00
Gabor Juhos	6d8163505e	ar71xx: add kernel support for the Netgear WNR612 v2 board ... Netgear WNR612 v2: - cpu Atheros AR7240 (Python) @400MHz - flash 4MB - ram 32MB - ethernet 10/100: 1xwan + 2xlan (only two) - radio AR9285 [juhosg: use a separate kernel patch] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3876/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37575	2013-07-28 10:23:36 +00:00
Gabor Juhos	ede1587ed8	ar71xx: add profile and build image for the TL-WR710N board ... Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3873/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37574	2013-07-28 10:23:34 +00:00
Gabor Juhos	5f5257e234	ar71xx: add user-space support for the TL-WR710N board ... Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3873/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37573	2013-07-28 10:23:33 +00:00
Gabor Juhos	c5029c2ebf	ar71xx: add kernel support for the TP-LINK TL-WR710N v1 board ... Small router sold in EU: AR9330@400MHz, 1x USB2.0, 2x ethernet, 8MB flash, 32MB ram, one led, one button. See: http://galeria.tech-blog.pl/TP-Link_TL-WR710N-EU/ [juhosg: use a separate kernel patch] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3873/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37572	2013-07-28 10:23:32 +00:00
Gabor Juhos	af1dd57a37	ar71xx: build image for the MERCURY MW4530R board ... Mercury MW4530R is a TP-Link TL-WDR4310 clone but with a much lower price tag (~ $40). This patch is tested to work at trunk r37525. Signed-off-by: Leon Xu <ylxu72@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3856/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37571	2013-07-28 10:23:31 +00:00
Gabor Juhos	8b6f392b72	ar71xx: add model detection for the MERCURY MW4530R board ... Mercury MW4530R is a TP-Link TL-WDR4310 clone but with a much lower price tag (~ $40). This patch is tested to work at trunk r37525. Signed-off-by: Leon Xu <ylxu72@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3856/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37570	2013-07-28 10:23:29 +00:00
Gabor Juhos	b49dc036e8	ar71xx: TEW632BRP has buttons 'active low', fix board config ... Looks like trunk@37090 has changed the logic that determines if router's button was pressed. This resulted in TEW632BRP always booting into failsafe mode because it detected pressed button (which was not pressed). Measure with voltmeter has shown that buttons on this router are actually active-low. This patch reflects this fact in board configuration and fixes 'load info failsafe mode' issue. Note: it looks like Trendnet TEW632BRP and a close relative to TEW-652BRP V1.0 and D-Link DIR-615C1, so same problem may exist on those routers as well. This patch doesn't affect routers other than 632BRP and unfortunately I do not have hardware to test this issue with other routers. This patch fixes #13893 and is tested on actuall Trendnet TEW632BRP. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37569	2013-07-28 10:23:22 +00:00
John Crispin	8dd30fa775	ramips: add MPR-A1 support ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37568	2013-07-27 09:23:52 +00:00
John Crispin	13b7ab81cf	ralink: gpio driver should not set gpio to input when irq is querired ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37567	2013-07-27 09:23:45 +00:00
John Crispin	eb089abd28	ramips: add back dwc_otg driver ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37566	2013-07-27 09:23:40 +00:00
John Crispin	718b47f0b4	ramips: MPR-A2 should use memory auto detection ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37565	2013-07-27 09:23:34 +00:00
John Crispin	115c6f85cf	ramips: enable usb phy support on rt5350 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37564	2013-07-27 09:23:29 +00:00
John Crispin	f4c4ca0b00	ralink: switch back to dwc_otg ... dwc2 seems to not work well with 3G modems ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37563	2013-07-27 09:23:24 +00:00
John Crispin	4176b6fdd3	strict_strtoul is obsolete, use kstrtoul instead ... based on http://patchwork.openwrt.org/patch/3827/ Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37562	2013-07-27 09:23:18 +00:00
John Crispin	c4413b6e08	ramips: unbreak asiarf dts files ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37561	2013-07-26 15:19:19 +00:00
Gabor Juhos	f093cda481	ar71xx: add profile and fixup image generation for the TL-MR10U board ... Create a separate board profile and update the profile name in image/makefile. Also use the correct machtype string in kernel command line. Based on andelf's patch: http://andelf.diandian.com/post/2013-05-22/40050677370 Signed-off-by: Oleg Titov <oleg.titov@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3840/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37550	2013-07-26 07:32:01 +00:00
Gabor Juhos	f4d5ecdb9f	ar71xx: add user-space support for the TL-MR10U board ... Based on andelf's patch: http://andelf.diandian.com/post/2013-05-22/40050677370 Signed-off-by: Oleg Titov <oleg.titov@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3840/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37548	2013-07-26 07:31:59 +00:00
Gabor Juhos	ec7fe3fab7	ar71xx: add kernel support for the TL-MR10U board ... Based on andelf's patch: http://andelf.diandian.com/post/2013-05-22/40050677370 [juhosg: extend WR703N code to handle the TL-MR10U instead of adding a separate mach-tl-mr10u file]] Signed-off-by: Oleg Titov <oleg.titov@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3840/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37547	2013-07-26 07:31:57 +00:00
Gabor Juhos	e9688455f6	kernel: update 3.10 to 3.10.3 ... Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37546	2013-07-26 07:19:58 +00:00
John Crispin	bfe65eaf7a	lantiq: remove stale phy register setup properties from dts files ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37544	2013-07-25 20:54:51 +00:00
John Crispin	54b4074074	lantiq: add TP-Link TDW8970 image generation ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37543	2013-07-25 20:29:24 +00:00
John Crispin	a2c5540727	lantiq: add profile for TP-Link TDW8970 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37542	2013-07-25 20:29:20 +00:00
John Crispin	a99042c6a4	lantiq: add devicetree for TP-Link TDW8970 ... Signed-of-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37541	2013-07-25 20:29:15 +00:00
John Crispin	313636c1e4	lantiq: fix initramfs image generation for lzmaloader based images ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37540	2013-07-25 20:29:10 +00:00
John Crispin	a4d31c0353	lantiq: make macs loadable from mtd partitions ... This is a really ugly hack but it will have to do until we copy the ramips patches to the lantiq tree Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37539	2013-07-25 20:29:05 +00:00
John Crispin	32f7ae4ce6	lantiq: add a hook to make leds work on the secondary usb bus ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37538	2013-07-25 20:29:01 +00:00
John Crispin	4036be4408	lantiq: update pcie driver ... This is an intermediate commit until the new OF driver is functional. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37537	2013-07-25 20:28:56 +00:00
Lars-Peter Clausen	dee22d069f	xburst: Add missing kernel config symbol ... Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> SVN-Revision: 37534	2013-07-25 18:39:34 +00:00
John Crispin	04aaf7a03e	ramips: disable hg255d ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37532	2013-07-25 17:03:08 +00:00
John Crispin	7feebeb193	ramipe: disable HG255D support ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37531	2013-07-25 16:55:48 +00:00
John Crispin	9b2c7be0c4	ramips: important patch for HG255D ... r37505 add support for Huawei HG255D, but it only tested under a community hacked u-boot ("lintel u-boot"), which has a different mtd layout compared to origin one. If you install it on a box with origin u-boot, the origin factory part will be destroyed, and your wifi interface will never up!!! This patch shrink firmware part in mtd layout to exclude origin factory part, and I will prepare another patch to fix the eeprom extract issue for box with origin u-boot. Signed-off-by: Leon Xu <ylxu72@gmail.com> SVN-Revision: 37530	2013-07-25 16:01:58 +00:00
John Crispin	3ad136d9e3	ramips: Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board. ... Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board. http://www.asiarf.com/Smallest-Tiny-Ralink-802-11n-Wireless-AP-Router-Module-Board-AWM002-product-view-375.html Signed-off-by Jon Smirl <jonsmirl@gmail.com> SVN-Revision: 37521	2013-07-24 08:54:41 +00:00
John Crispin	3f3cac6136	ramips: fix HG255D VLAN initial detect issue ... Signed-off-by: Leon Xu <ylxu72@gmail.com> SVN-Revision: 37517	2013-07-23 13:07:00 +00:00
John Crispin	9181c569c4	linux/atheros: add 3.10 kernel support ... SVN-Revision: 37513	2013-07-22 19:10:59 +00:00
Lars-Peter Clausen	db32da6b16	xburst: Unmark broken ... 3.10 support is working fine for this platform, so unmark it broken. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> SVN-Revision: 37512	2013-07-22 18:44:05 +00:00
Lars-Peter Clausen	44745f714e	xburst: Remove 3.8 support ... 3.8 support for this platform is broken, so remove it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> SVN-Revision: 37511	2013-07-22 18:42:36 +00:00
Lars-Peter Clausen	32a83db347	xburst: Add 3.10 support ... Missing files from the previous commit. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> SVN-Revision: 37510	2013-07-22 18:41:23 +00:00
Lars-Peter Clausen	e7d77883c7	xburst: Add 3.10 support ... Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> SVN-Revision: 37509	2013-07-22 18:40:32 +00:00
Gabor Juhos	ea55883a51	ar71xx: fix switch port map for the Archer C7 ... The correct port number for the WAN port is 1. Update the VLAN port maps to reflect that. https://forum.openwrt.org/viewtopic.php?pid=203755#p203755 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37507	2013-07-22 16:02:13 +00:00
Gabor Juhos	bc91bec9f6	kernel/3.10: rework MIPS FPU emulation disable patch ... Get rid of some ifdefs, and make sure that the microMIPS specific code is disabled as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37506	2013-07-22 16:02:12 +00:00
John Crispin	0cc1e2acb4	ramips: Add support for Huawei HG255D in trunk ... HG255D is a kind of popular low-end home gateway in China, this patch bring the the trunk support for it. It is adapted from a local Chinese community (www.right.com.cn), so credit should given to them. This patch is tested to work except trivial LED issues. Signed-off-by: Leon Xu <ylxu72@gmail.com> SVN-Revision: 37505	2013-07-22 15:36:39 +00:00
Gabor Juhos	ef944dcb85	kernel: update 3.10 to 3.10.2 ... Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37502	2013-07-22 15:31:13 +00:00
Gabor Juhos	6a5b4ec7dc	kernel: update 3.9 to 3.9.11 ... Also refresh 3.9 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37501	2013-07-22 15:30:56 +00:00
John Crispin	8d0cd50f30	ralink: set remove dwc_otg from default packages and use dwc2 instead ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37499	2013-07-22 13:52:52 +00:00
John Crispin	ffe389c4c5	ralink: remove dwc_otg from modules.mk ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37498	2013-07-22 13:52:44 +00:00
John Crispin	5525b2136e	ralink: set v3.10 as default ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37497	2013-07-22 13:52:32 +00:00
Felix Fietkau	a50c18c632	kernel: fix crash in act_connmark in 3.9 and 3.10 (fixes #13916, #13876) ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37493	2013-07-21 13:53:54 +00:00
Hauke Mehrtens	a1ec175d7b	kernel: add missing config option CONFIG_SND_MXS_SOC ... This is needed by imx23 target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37492	2013-07-21 12:27:22 +00:00
Felix Fietkau	94439c2b5d	kernel: add a new global config symbol for enabling rfkill support (can be enabled by default via target feature flag) ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37491	2013-07-21 11:55:30 +00:00
Lars-Peter Clausen	8fc44d1f5f	kernel: Remove gpio-pwm patches ... There is no platform using the gpio-pwm driver, yet these patches break the generic PWM framework that is in upstream. So just remove them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> SVN-Revision: 37490	2013-07-21 11:43:16 +00:00
Felix Fietkau	bb141e06a2	kernel: merge a proposed fix from LKML for fixing infinite data returned by /proc/timer_list ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37484	2013-07-20 18:35:54 +00:00
Jonas Gorski	7ef37c8e3e	brcm63xx: add linux 3.10 support ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37481	2013-07-20 11:30:26 +00:00
Gabor Juhos	205f7248ae	Revert "ar71xx: override cpu_has_mmips feature" ... This reverts r37477. A generic patch is used to fix this globally, so revert the ar71xx specific change. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37480	2013-07-20 10:14:08 +00:00
Gabor Juhos	a2d12049e0	kernel/3.10: add a generic patch for cpu_has_mmips override ... Backport of commit 3ddc14add5e6341cf8ef4058c34c67ba7fd15317 from 3.11-rc1 Suggested-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37479	2013-07-20 10:14:05 +00:00
Gabor Juhos	f5f9bce168	kernel/3.10: make emulate_load_store_microMIPS static ... This allows the compiler to remove the emulate_load_store_microMIPS function if cpu_has_mmips is defined as zero. Backport of commit 74338805ec6869594d583535f941cb478c94dd73 from 3.11-rc1. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37478	2013-07-20 09:53:54 +00:00
Gabor Juhos	2d8fd8b58c	ar71xx: override cpu_has_mmips feature ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37477	2013-07-20 09:40:32 +00:00
Gabor Juhos	8a6575cf53	ar71xx: use mtd_get_part_size helper ... Drop the local get_mtd_part_size implementation and use the equivalent function provided by lib/functions.sh. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37476	2013-07-20 09:26:57 +00:00
Gabor Juhos	7ee96847cf	mpc85xx: remove 3.8 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37474	2013-07-20 09:13:04 +00:00
Gabor Juhos	294d7611c8	mpc85xx: switch to 3.10 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37473	2013-07-20 09:13:01 +00:00
Gabor Juhos	5803e27005	mpc85xx: add 3.10 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37472	2013-07-20 09:12:57 +00:00
Gabor Juhos	4a9d4271d0	ar71xx: build image for the TP-LINK TL-WR941N v6 board ... TL-WR941N v6 use almost same IC as WDR3500. [juhosg: change subject, and change fw layout from 4M to 4Mlzma] Patchwork: http://patchwork.openwrt.org/patch/3719/ Signed-off-by: ShuYu Wang <andelf@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37471	2013-07-20 08:54:45 +00:00
Gabor Juhos	187a69c631	linux: move more ARM_ERRATA symbols to the generic config ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37470	2013-07-20 07:43:54 +00:00
Gabor Juhos	a9de3a851a	linux: remove 3.7 support ... It is not used by any target. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37469	2013-07-20 07:37:27 +00:00
Gabor Juhos	c8933c968f	linux: remove duplicated 3.10 symbols from target config files ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37467	2013-07-20 07:21:52 +00:00
Jonas Gorski	b1b4e7db13	kernel: move CONFIG_NET_IP_TUNNEL to generic ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37465	2013-07-19 22:58:01 +00:00
Gabor Juhos	9e14f9df5f	malta: remove CONFIG_NET_CLS* overrides ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37464	2013-07-19 22:51:37 +00:00
Gabor Juhos	f4242a4324	malta: remove CONFIG_NET_SCH_* overrides ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37463	2013-07-19 22:51:36 +00:00
Gabor Juhos	2dee293d02	malta: remove CONFIG_*_PHY overrides ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37462	2013-07-19 22:51:35 +00:00
Gabor Juhos	e47a2a24a7	malta: remove 3.8 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37457	2013-07-19 17:12:53 +00:00
Gabor Juhos	784311eec3	malta: switch to 3.10 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37456	2013-07-19 17:12:52 +00:00
Gabor Juhos	64977a70de	malta: add support for 3.10 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37455	2013-07-19 17:12:51 +00:00
Gabor Juhos	620f07eed4	malta: update README ... The images which are usable with Qemu have a '-initramfs' suffix. Update the readme to reflect that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37454	2013-07-19 17:12:47 +00:00
Gabor Juhos	68d5ce18d0	malta: avoid redundant vmlinux-initramfs.elf copy ... Patchwork: http://patchwork.openwrt.org/patch/3811/ Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37453	2013-07-19 17:12:46 +00:00
Gabor Juhos	0f0f250b66	kernel: add missing symbols for 3.10 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37450	2013-07-19 17:12:36 +00:00
Gabor Juhos	8e674fdf1b	kernel: refresh config-3.10 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37449	2013-07-19 17:12:34 +00:00
Hauke Mehrtens	72f73ab041	x86: fix kmod-gpio-pc8736x dependencies ... Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37447	2013-07-19 14:55:51 +00:00
Jonas Gorski	29954b9ffc	kernel: remove gpio_buttons ... It hasn't been buildable for a long time, and there are no users of it anymore left as all of them have been switched to the upstream accepted version. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37436	2013-07-19 13:20:41 +00:00
Jonas Gorski	960002ed4b	x86: switch rdc to to gpio_keys_polled ... gpio_buttons have been deprecated since a long time. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37435	2013-07-19 13:20:39 +00:00
Jonas Gorski	6db050194e	ixp4xx: switch cambira to gpio_keys_polled ... gpio_buttons have been deprecated since a long time. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37434	2013-07-19 13:20:37 +00:00
Hauke Mehrtens	c7f8cb3f4f	kernel: update bcma and ssb to version from wireless-testing/master tag master-2013-07-18 ... This should fix some build problems in b43 with kernel 3.3. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37432	2013-07-19 12:02:34 +00:00
Jonas Gorski	21412ccb21	kernel: add missing kernel config symbol ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37423	2013-07-19 09:51:20 +00:00
Felix Fietkau	d2cbc1b6cf	imx23: add back the missing imx23 target dependency ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37417	2013-07-18 17:26:46 +00:00
Zoltan Herpai	8aa106cf43	imx23: ChipIdea changes ... - move ci_hdrc into generic modules - add separate package for imx-specific modules Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 37384	2013-07-17 22:49:16 +00:00
John Crispin	8028fb8096	ramips: add sysupgarde support for wl-330n3g ... https://dev.openwrt.org/ticket/13891 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37376	2013-07-17 09:44:57 +00:00
Luka Perkov	6a985ed219	imx6: add missing patches (r37363) ... SVN-Revision: 37364	2013-07-15 23:44:26 +00:00
Luka Perkov	af6eb6cc8c	imx6: add support for gw5400-a ... Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 37363	2013-07-15 23:18:39 +00:00
Luka Perkov	6ef9d30da7	imx6: use $PATH to locate dtc binary ... Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37362	2013-07-15 23:18:37 +00:00
John Crispin	dd22304691	ramips: make the old dwc driver depend on v3.9 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37357	2013-07-15 21:06:03 +00:00
John Crispin	072e1a254c	ramips: add v3.10 kernel config files ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37356	2013-07-15 21:05:58 +00:00
John Crispin	947abea261	kernel: v3.10 has no GENERIC_GPIO anymore ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37355	2013-07-15 21:05:53 +00:00
John Crispin	cb6375c20a	ramips: fix ehci/ohci OF binding ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37354	2013-07-15 21:05:47 +00:00
John Crispin	12a099eb07	ramips: update dtsi files to work with dwc2 driver ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37353	2013-07-15 21:05:42 +00:00
John Crispin	e8ebcffd02	ramips: add a explicit reset to dwc2 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37352	2013-07-15 21:05:36 +00:00
Felix Fietkau	8b92613b6c	ar71xx: fix uimage split for ew-dorin ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37350	2013-07-15 16:59:58 +00:00
Felix Fietkau	c77eca3108	ar71xx: refresh patches ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37349	2013-07-15 15:12:41 +00:00
Felix Fietkau	3197479290	kernel: refresh 3.10 patches ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37348	2013-07-15 15:12:37 +00:00
Felix Fietkau	a6db996b13	kernel: fix another corner case in the bridge state patch (#13874) ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37347	2013-07-15 15:12:33 +00:00
Felix Fietkau	93cb862260	kernel: fix a bridge issue that broke WDS client handling in 3.9+ ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37341	2013-07-15 12:25:58 +00:00
Hauke Mehrtens	866e229299	brcm47xx: fix name of patch ... SVN-Revision: 37340	2013-07-15 11:42:54 +00:00
John Crispin	bd78f2b56e	ramips: add a patch to make dwc2 work with boards that have an old bootloader ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37339	2013-07-15 11:34:13 +00:00
Felix Fietkau	9a9d97b749	bcm63xx: update ralink wlan firmware hotplug script for new eeprom size ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37337	2013-07-15 11:07:59 +00:00
Felix Fietkau	fc96e8e4b0	lantiq: update ralink wlan firmware hotplug script for new eeprom size ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37334	2013-07-15 11:06:07 +00:00
Felix Fietkau	93c73cfb14	kernel: fix block2mtd build after removing the device refresh ioctl ... fixes #13882 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37332	2013-07-15 11:01:48 +00:00
John Crispin	a0de18807b	ramips: add ralink v3.10 support ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37331	2013-07-15 10:06:55 +00:00
Luka Perkov	75b911ddc1	imx6: switch to askconsole ... Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37326	2013-07-15 00:03:40 +00:00
Luka Perkov	9e3eee974b	ar71xx: remove patches for 3.8 (leftover after r37315) ... Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37324	2013-07-14 22:57:47 +00:00
Florian Fainelli	758a411797	realview: switch to 3.10 kernel ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37322	2013-07-14 21:04:36 +00:00
Florian Fainelli	60e92f6e58	realview: add support for 3.10 kernel ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37321	2013-07-14 21:04:15 +00:00
Florian Fainelli	116990441b	kernel: add some more ARM related configuration symbols ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37320	2013-07-14 21:03:53 +00:00
John Crispin	955662ec47	lantiq: apply [37258] also to the 3.9 kernel patches ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37317	2013-07-14 18:28:02 +00:00
John Crispin	3d15bc6fb2	ar71xx: fix maximum watchdog timeout ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37315	2013-07-14 18:01:09 +00:00
John Crispin	f7cf157712	ramips: disable ill_acc driver by default ... The driver seems to be causoing boot rpoblems on some SoCs Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37314	2013-07-14 18:01:00 +00:00
John Crispin	89c0392736	ralink: drop v3.8 support ... Signed-off-by: John Crispin <blogic@opewnrt.org> SVN-Revision: 37311	2013-07-14 18:00:34 +00:00
Felix Fietkau	eb0a44917e	ar71xx: update to 3.10.1 ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37310	2013-07-14 17:29:56 +00:00
Hauke Mehrtens	f8d55e7541	brcm47xx: use b53 phy driver for the switch in kernel 3.10 ... This makes it possible to use swconfig to controll the switch. This was tested with devices using b43 and bgmac. This was not tested on devices using tg3. This does not support the adm switch used in some very old devices. SVN-Revision: 37304	2013-07-14 14:11:17 +00:00
Felix Fietkau	936683b2de	ar71xx: use uimage split for WHR-HP-G300N ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37303	2013-07-14 14:06:01 +00:00
Felix Fietkau	342946d858	ar71xx: use uimage split for dlrtdev ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37302	2013-07-14 14:05:57 +00:00
Felix Fietkau	594797cdd5	ar71xx: use uimage split for Allnet devices ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37301	2013-07-14 14:05:53 +00:00
Felix Fietkau	e5b7a20bea	ar71xx: use uimage split for Cameo devices ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37300	2013-07-14 14:05:50 +00:00
Felix Fietkau	4fc17e4d08	ar71xx: use uimage split for DIR-825B1 ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37299	2013-07-14 14:05:46 +00:00
Felix Fietkau	c263993197	ar71xx: use uimage split for Embedded Wireless Dorin ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37298	2013-07-14 14:05:42 +00:00
Felix Fietkau	083b0a06a3	ar71xx: use uimage split for Ubiquiti XM devices ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37297	2013-07-14 14:05:39 +00:00
Felix Fietkau	6702955857	ar71xx: increase kernel size for wndr3700 based devices ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37296	2013-07-14 14:05:35 +00:00
Felix Fietkau	25d910a78f	ar71xx: use uimage split for WZR-HP-G300NH2 ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37295	2013-07-14 14:05:31 +00:00
Felix Fietkau	6bff456212	ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37294	2013-07-14 14:05:27 +00:00
Felix Fietkau	fbde376c53	ar71xx: use uimage split for WZR-HP-G300NH ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37293	2013-07-14 14:05:23 +00:00
Felix Fietkau	a7c5f6708b	ar71xx: use uimage split for WZR-HP-G450H ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37292	2013-07-14 14:05:19 +00:00
Felix Fietkau	ab5e21a9a5	ar71xx: enable uimage split and use it for carambola2 ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37291	2013-07-14 14:05:16 +00:00
Felix Fietkau	8d5d96e833	ar71xx: remove linux 3.8 ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37290	2013-07-14 14:05:12 +00:00
Felix Fietkau	d1238718c2	ar71xx: move the watchdog driver to the kernel ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37289	2013-07-14 14:05:08 +00:00
Felix Fietkau	8cf868e1a6	ar71xx: set linux 3.10 as default ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37288	2013-07-14 14:05:04 +00:00
Hauke Mehrtens	a5c0ad6354	brcm47xx: add initial support for kernel 3.10 ... SVN-Revision: 37287	2013-07-14 13:44:45 +00:00
Hauke Mehrtens	3bc90a4d23	brcm47xx: fix switch handling ... This fixes some problems with the switch handling * It now send the messages again to indicate a button for failsafe mode should be pressed * it does not leak packages between wan and lan any more * the switch works again in normal mode The Ethernet connection has to be up when the switch driver switch-robo is insmoded therefor we just do it again. Explicitly set enable_vlan to prevent leaking packages. This should close #13869, #13868 and #13716 SVN-Revision: 37286	2013-07-14 13:19:58 +00:00
Felix Fietkau	17bbc92882	kernel: disable the yaffs2 /proc code to make it compile on linux 3.10 (#13848) ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37285	2013-07-14 13:10:22 +00:00
Hauke Mehrtens	ef0b9be95e	brcm47xx: do not load the kernel modules needed for Ethernet manually ... add the boot flag to make the kernel modules needed for Ethernet and diag load on startup. SVN-Revision: 37284	2013-07-14 12:59:00 +00:00
Felix Fietkau	656d475043	kernel: implement automatic rootfs split from the firmware partition in linux 3.10 (disabled by default) ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37283	2013-07-14 12:57:03 +00:00
Felix Fietkau	b95bdc8ab5	kernel/base-files: clean up old code related to refreshing mtd partitions, it is no longer used anywhere ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37282	2013-07-14 12:56:58 +00:00
Hauke Mehrtens	e800436de3	brcm47xx: do not change nvram without user interaction ... SVN-Revision: 37281	2013-07-14 12:56:42 +00:00
Hauke Mehrtens	da72edd7cd	kernel: refresh patches for kernel 3.8.13 ... SVN-Revision: 37276	2013-07-13 22:45:56 +00:00
Hauke Mehrtens	06accca1d7	kernel: update to kernel 3.10.1 and refresh patches ... SVN-Revision: 37275	2013-07-13 22:45:09 +00:00
Hauke Mehrtens	e574f75d16	kernel: update to kernel 3.9.10 and refresh patches ... SVN-Revision: 37274	2013-07-13 22:43:10 +00:00
Felix Fietkau	9b9c6facfc	ar71xx: fix ar933x watchdog clock (#13866) ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37273	2013-07-13 22:29:53 +00:00
Hauke Mehrtens	e041d370a7	brcm47xx: proc gets mounted without this patch ... SVN-Revision: 37272	2013-07-13 21:42:19 +00:00
Hauke Mehrtens	8dabd7a26b	brcm47xx: remove obsolete hotplug stuff ... SVN-Revision: 37271	2013-07-13 20:38:33 +00:00
Hauke Mehrtens	9e9261a718	bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs ... This was only tested on a Netgear R6250, but it could also work on other devices when the correct images are generated. It is only possible to boot into a ram disk, no Ethernet, Wifi, flash, USB is supported. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37268	2013-07-12 13:46:27 +00:00
John Crispin	39531131a9	ar71xx: add carambola2 support ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37260	2013-07-11 21:16:53 +00:00
John Crispin	93c4359512	lantiq: revert 36778 as it breaks irq assignment to pci devices ... Reported-by: Matti Laakso Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37258	2013-07-11 21:16:34 +00:00
Felix Fietkau	4932368398	kernel: add a patch that reduces module size by removing non-essential information (reduces default rootfs size by ~5k after lzma) ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37255	2013-07-11 20:56:27 +00:00
Felix Fietkau	19e3ec0570	kernel: disable CONFIG_RD_LZMA by default, it will be selected when actually needed ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37253	2013-07-11 20:56:19 +00:00
Felix Fietkau	f5ae93e941	kernel: disable CONFIG_CLS_U32_PERF by default, it is usually not needed ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37252	2013-07-11 20:56:15 +00:00
John Crispin	2d854d022c	ar71xx: set priority of ath79_wdt to 1 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37251	2013-07-11 17:01:08 +00:00
Florian Fainelli	8149689393	ar71xx: fix TPLINK/TPLINKOLD initramfs images typos ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37237	2013-07-10 21:28:34 +00:00
Florian Fainelli	01865ae1cf	brcm2708: drop support for 3.3 kernel ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37236	2013-07-10 19:43:11 +00:00
Florian Fainelli	110687b491	brcm2708: package the i2c master driver module ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37235	2013-07-10 19:43:07 +00:00
Florian Fainelli	c263d5725b	brcm2708: package the SPI master controller driver ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37234	2013-07-10 19:43:02 +00:00
Florian Fainelli	7fb9279359	kernel: add a bunch of missing LCD Kconfig options ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37233	2013-07-10 19:42:58 +00:00
Florian Fainelli	f2ff0e9259	brcm2708: package the HW random module ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37232	2013-07-10 19:42:53 +00:00
Florian Fainelli	9e40952c92	ar71xx: fix Netgear initramfs images ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37230	2013-07-10 17:18:03 +00:00
Florian Fainelli	399283f875	ar71xx: fix some more issues with initramfs images ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37229	2013-07-10 15:22:47 +00:00
Felix Fietkau	eb2e09c5e9	ar71xx: make implicit alignment in struct pptp_addr explicit to fix ABI breakage caused by the unaligned access hacks patch ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37223	2013-07-10 11:33:43 +00:00
Florian Fainelli	44d22771ae	brcm2708: update maintainership ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37220	2013-07-09 20:53:13 +00:00
Florian Fainelli	15da5cfcdb	brcm2708: switch to 3.10 kernel ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37219	2013-07-09 20:53:08 +00:00
Florian Fainelli	de69c9edb0	brcm2708: add support for 3.10 kernel ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37218	2013-07-09 20:52:49 +00:00
Florian Fainelli	818d2603ee	kernel: add missing configuration symbols used on ARM platforms ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37217	2013-07-09 20:52:23 +00:00
Florian Fainelli	0b55984e1d	kernel: update PATCHES with a stricter policy ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37216	2013-07-09 20:52:07 +00:00
Felix Fietkau	64dde7d981	ar71xx: add linux 3.10 ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37214	2013-07-09 12:52:18 +00:00
Felix Fietkau	4b5c5934e1	kernel: debloat the lzma compress/decompress code some more ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37211	2013-07-09 12:52:04 +00:00
Felix Fietkau	51b1e8577c	kernel: do not accept sysrq characters via serial port ... many boards have a disconnected TTL level serial which can generate some garbage that can lead to spurious false sysrq detects. Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37210	2013-07-09 12:52:00 +00:00
Jonas Gorski	c183dbc542	kernel: add missing config symbol ... Should fix buildbot builds of ixp4xx. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37208	2013-07-09 07:51:09 +00:00
Zoltan Herpai	7d4c120557	imx23: add gpio_sysfs support ... Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 37207	2013-07-08 23:08:26 +00:00
John Crispin	099188695a	ralink: vlan offloading is causing problems. disable it ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37203	2013-07-08 16:34:52 +00:00
John Crispin	a6091a5c71	ralink: unbreak ralink i2c support ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37202	2013-07-08 09:01:57 +00:00
John Crispin	a154693bab	ralink: add i2c-ralink kmod info ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37200	2013-07-08 09:01:47 +00:00
Gabor Juhos	e194a31500	linux: refresh kernel configs with kconfig.pl ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37195	2013-07-08 08:40:22 +00:00
Gabor Juhos	e61a77a05c	ar71xx: disable JTAG on TL-WR841N-v8/MR3420v2 ... It also fixes USB Power on MR3420v2. Signed-off-by: Dmytro <dioptimizer@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37194	2013-07-08 08:40:21 +00:00
Gabor Juhos	446a962481	ar71xx: fix partition layout on Netgear WNDAP360 ... Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37193	2013-07-08 08:40:20 +00:00
Gabor Juhos	ca02639d17	ar71xx: fix for wrong eth0 mac assignment on Netgear WNDAP360 ... Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37192	2013-07-08 08:40:18 +00:00
Luka Perkov	9de461f202	lantiq: etop enable gbit port0 ... Signed-off-by: Antonios Vamporakis <vamporakis@yahoo.com> Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37191	2013-07-08 07:11:59 +00:00
Felix Fietkau	dbb2feb87d	kernel: disable zisofs and zlib by default, reduces kernel size after lzma by ~10k ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37187	2013-07-06 14:49:24 +00:00
Felix Fietkau	bb0d563919	imx23: fix kernel module dependencies ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37181	2013-07-06 14:48:56 +00:00
Luka Perkov	1a3ad5a037	lantiq: add device tree support for arv4519pw ... Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37178	2013-07-05 07:44:42 +00:00
Luka Perkov	ecfb0c6de6	ar71xx: merge patches [611-*,621-*] into 610-* ... Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37176	2013-07-04 23:31:39 +00:00
Zoltan Herpai	de17203c85	imx23: bump kernel to 3.10 ... - fix BOARDNAME - add profile for Olinuxino boards - prep image Makefile for u-boot inclusion, separate out bootlet build - update kernel config to reflect updated chipidea requirements - update rtc/watchdog config Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 37175	2013-07-04 22:25:26 +00:00
Zoltan Herpai	2a8630394d	kernel/generic: add missing regulator symbols for 3.10 ... Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 37169	2013-07-04 16:58:22 +00:00
Luka Perkov	1f546910cb	ar71xx: Buffalo WZR-HP-AG300H (600DHP) enable PCI ... Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37167	2013-07-04 13:45:29 +00:00
John Crispin	2da37a713e	ramips: fix RT-N13U gpio buttons ... https://dev.openwrt.org/ticket/13795 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37163	2013-07-04 13:31:23 +00:00
John Crispin	541bede918	brcm47xx: fix module insert order ... https://dev.openwrt.org/ticket/13811 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37161	2013-07-04 13:31:13 +00:00
Luka Perkov	7b6e3df6ab	ar71xx: $(KDIR_TMP) must be present before starting initramfs build ... Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37155	2013-07-04 12:48:52 +00:00
Jonas Gorski	fb81a9b5ed	ixp4xx: replace magic number with macros in avila/ixdp425/miccpt PCI routing setup ... Replace magic number with the appropriate macro in avila/ixdp425/miccpt PCI routing setup. Signed-off-by: Tamas TEVESZ <ice@extreme.hu> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37154	2013-07-03 17:51:54 +00:00
Jonas Gorski	cdd6c5b750	ixp4xx: switch to kernel 3.10 ... Fixes network issues at least on NSLU2 (#13801). Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37153	2013-07-03 17:51:44 +00:00
Luka Perkov	14b6674b39	lantiq: fix initramfs ... Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37143	2013-07-03 09:17:15 +00:00
Luka Perkov	62cb88f502	imx6: make kernel_oldconfig ... Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37134	2013-07-02 23:08:16 +00:00
Luka Perkov	c9926f77b4	ar71xx: Buffalo WZR-HP-AG300H (600DHP) change button type ... switch buttons should be declared as switch so the failsafe shell is not triggered by accident in procd Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37131	2013-07-02 10:45:32 +00:00
Florian Fainelli	c627ae768e	ar71xx: only invoke Initramfs building when enabled ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37129	2013-07-02 10:43:31 +00:00
John Crispin	fdfbac75c2	lantiq: xrx200_net compile fix ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37126	2013-07-02 09:34:45 +00:00
Jonas Gorski	87c0c2d81d	ixp4xx: add support for linux 3.10 ... Run tested on a NSLU2. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37124	2013-07-01 18:42:49 +00:00
Jonas Gorski	923a851ccf	kernel: add missing config symbol for 3.10 ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37123	2013-07-01 18:42:39 +00:00
Florian Fainelli	460233fa2a	ar71xx: fix initramfs images generation after r37049 ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37120	2013-07-01 15:37:25 +00:00
Jonas Gorski	96f8c15a36	kernel: update linux 3.10 to 3.10 final ... 3.10 final is out, so refresh patches and add md5sum. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37116	2013-07-01 13:21:06 +00:00
Felix Fietkau	5986a18c16	ramips: update wlan firmware hotplug script for new eeprom size ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37112	2013-06-30 21:03:48 +00:00
Jonas Gorski	0d9f760f27	kernel: update linux 3.9 to 3.9.8 ... Includes memory allocation fixes as well as several networking fixes. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37103	2013-06-30 13:10:12 +00:00
Jonas Gorski	6a4e78dca6	brcm63xx: Fixes and additions to the GPIO assignment of Huawei HW556 leds ... - Some fixes for the incorrect GPIO assignment of leds on Huawei HW556. - Addition of unassigned (LAN) leds which can be found on the back of the device. Signed-off-by: Angga Reza Fardana <angga@norture.com> Patchwork: http://patchwork.openwrt.org/patch/3744/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37102	2013-06-30 13:10:08 +00:00
Jonas Gorski	7d1cd9dfab	bcm63xx: Improve CFE version mod patch. ... Fix "cfe-" string length copy. Check if there's an extra byte a.b.c-d.e / a.b.c-d.e-f. Add support for Huawei CFE versions ("cfe-vd"). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3766/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37101	2013-06-30 13:10:05 +00:00
Jonas Gorski	6df83c3f89	bcm63xx: enable all SoCs for both subtargets ... Now that SMP kernels also work on older SoCs, also enable them for SMP. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37100	2013-06-30 13:10:03 +00:00
Jonas Gorski	e7d93889d7	bcm63xx: make smp kernels boot on older SoCs ... Enhance BMIPS support so SMP kernels work on older chips. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37099	2013-06-30 13:10:00 +00:00
Jonas Gorski	66f8f30f47	bcm63xx: update patches ... Update patches with their upstream versions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37098	2013-06-30 13:09:50 +00:00
John Crispin	124ef95f5f	lantiq: add v3.9 support ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37089	2013-06-29 18:16:56 +00:00
John Crispin	bfc7007226	lantiq: Add support for loading athxk eeproms through mtd ... This patch enables retrieving the wifi calibration data from an MTD partition. Try to copy mac address from ethernet before generating a random one. This fixes DGN3500 ath9k support. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 37087	2013-06-29 16:33:46 +00:00
John Crispin	fe8ecbd972	lantiq: fix kernel config for DEU support ... Trying to load the DEU modules results in unresolved symbols. This provides them. This requires the previous patch to be applied first. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 37086	2013-06-29 16:33:37 +00:00
John Crispin	b4f36358ff	lantiq: make xrx200 network driver use a tasklet for rx housekeeping ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37085	2013-06-29 16:33:28 +00:00
John Crispin	aff84655f5	lantiq: remove 3.7 kernel patches ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37084	2013-06-29 16:33:18 +00:00
John Crispin	6875316646	ramips: unbreak initramfs generation ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37080	2013-06-29 08:41:03 +00:00
Florian Fainelli	8ea5e19823	targets: fix remaining targets for initramfs builds ... Fix some bugs that slipped through while making initramfs non exclusive. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37079	2013-06-28 22:56:34 +00:00
Felix Fietkau	7acb84dde7	kernel: add global menuconfig option to enable kexec support ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37073	2013-06-28 11:27:20 +00:00
Felix Fietkau	900f78e3be	orion: disable normal router support for the harddisk subtarget ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37069	2013-06-28 11:27:06 +00:00
Felix Fietkau	059003fa90	orion: disable CONFIG_VM_EVENT_COUNTERS by default ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37068	2013-06-28 11:27:02 +00:00
Felix Fietkau	84ad1782f9	orion: dynamically generate /etc/config/network, the LaCie 2big Network does not use DSA ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37061	2013-06-28 11:26:37 +00:00
Felix Fietkau	6d6296e214	orion: add support for the lacie 2big network device ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37059	2013-06-28 11:26:29 +00:00
John Crispin	77b9fd52a6	ramips: fix ethernet driver ... make sure the driver does not crash under load Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37058	2013-06-28 11:22:11 +00:00
Florian Fainelli	6a4f2922f6	targets: prepare for supporting normal and initramfs images ... In order to support both normal images and initramfs, ensure that each target sets KERNELNAME properly so that the generic kernel building code can copy the corresponding files over $(KDIR) with the appropriate extension. Update the various paths to the kernel and wrapper images from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37049	2013-06-27 19:58:31 +00:00
John Crispin	36209234ab	ramips: fix rt2x00 ethernet compile bug ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37043	2013-06-27 16:45:40 +00:00
John Crispin	0d4e00c337	ramips: add missing symbols to rt288x config ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37042	2013-06-27 16:45:26 +00:00
John Crispin	1706c8d29a	ramips: fix ethernet stability issue introduced by recent kernel upgrade ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37041	2013-06-27 16:28:06 +00:00
Zoltan Herpai	e5c7a93d71	imx23: add new target for i.MX233-based boards ... Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 37038	2013-06-27 10:12:03 +00:00
Zoltan Herpai	41ad05299c	kernel/generic: add missing regulator symbols for 3.9 ... Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 37036	2013-06-26 21:48:17 +00:00
Jonas Gorski	9a077f70de	bcm63xx: fix DSL-274xB F1 default network config ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37032	2013-06-24 20:35:54 +00:00
John Crispin	5063f712a6	ramips: move ESW reset to preinit on RT305x/RT5350 ... RT305x/RT5350 SoCs require the switch to be reset before touching the ethernet interface, otherwise the driver will panic. As we already init the ethernet in preinit we therefor need to reset the switch before that. Signed-off-by: Felix Kaechele <felix@fetzig.org> SVN-Revision: 37027	2013-06-24 12:39:28 +00:00
John Crispin	d3723f93c6	ramips: make rt3883 usb work properly ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37024	2013-06-24 12:06:56 +00:00
John Crispin	dca18caa79	ramips: revert gpio regulator dts update ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37021	2013-06-24 11:09:50 +00:00
John Crispin	55fb6f3a05	ralink: update patches ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37016	2013-06-23 15:50:49 +00:00
Felix Fietkau	3df61e8279	kernel: fix a reference counting bug in overlayfs ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37014	2013-06-22 14:00:12 +00:00
John Crispin	44b1688e6c	lantiq: Tune the XWAY subtarget cflags ... This patch sets the cflags -mtune=34kc -mdsp only in XWAY subtarget, while the others remain with mtune=mips32r2. Although the Danube has a Mips 24KEc core performs well with the above cflags. Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com> SVN-Revision: 37006	2013-06-21 16:54:15 +00:00
John Crispin	5d441ae7ea	lantiq: set mips16 support. ... Set mips16 support in XWAY subtarget. This patch is based in changeset #36600 Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37005	2013-06-21 16:54:07 +00:00
John Crispin	81c57ec131	lantiq: Fix ARV7518 DTS definitions ... Fix EBU leds by removing req2 and gnt2 from pinmux. Fix rfkill button gpio. Enable reset button. Fix power led activation status. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 37004	2013-06-21 16:54:03 +00:00
John Crispin	67f5f188b1	base-files: input/button drivers get loaded before preinit by procd ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37000	2013-06-21 16:53:47 +00:00
John Crispin	e6ef318802	base-files: diag does not need to insmod any drivers, procd already did it for us ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36999	2013-06-21 16:53:43 +00:00
John Crispin	39df8d1a45	brcm47xx: dont manually insmod switch drivers ... Signed-off-by: John Crispin <bloic@openwrt.org> SVN-Revision: 36993	2013-06-21 16:53:15 +00:00
John Crispin	2be717560a	ar71xx: drop procd_init console hack ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36992	2013-06-21 16:53:11 +00:00
Imre Kaloz	c228ed04a1	increase kernel partition size to fix boot issues ... SVN-Revision: 36982	2013-06-21 10:57:05 +00:00
Florian Fainelli	4ef56823e0	brcm63xx: reduce the number of Ethernet DMA channels from 16 to 8 ... We currently used 16 DMA Ethernet channels, but the hardware only supports up to 8 (with 2 per enet and the remaining for USB slave). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36979	2013-06-20 18:47:36 +00:00
Felix Fietkau	2a5e1910d5	linux-3.8: backport a leds-gpio.c crash fix (fixes #13721) ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36968	2013-06-18 22:23:38 +00:00
Florian Fainelli	28535aad38	brcm63xx: refresh 3.9 patches ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36958	2013-06-18 10:54:28 +00:00
Florian Fainelli	a9d4bdee43	brcm63xx: provide a default sane MAC address for Cable Modem devices ... Cable modem devices currently poke at some random location in RAM and may end up having an invalid MAC address which is not suitable. Provide a default one which is sane. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36957	2013-06-18 10:54:24 +00:00
Florian Fainelli	8ae2b1155d	brcm63xx: create initramfs HCS images ... Cable Modem devices cannot load an ELF file directly so we need to provide them with a HCS image even when targetting initramfs. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36954	2013-06-17 22:57:04 +00:00
Florian Fainelli	0ce75bc440	brcm63xx: simplify HCS image creation ... $(KDIR)/vmlinux is already a binary image, there is no need to create another one. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36949	2013-06-17 19:32:56 +00:00
Florian Fainelli	78a66975d6	brcm63xx: remove support for 3.8 kernel ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36948	2013-06-17 19:32:47 +00:00
Florian Fainelli	d2894412d8	brcm63xx: switch to 3.9 kernel ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36947	2013-06-17 19:32:42 +00:00
Florian Fainelli	f03bbaf065	brcm63xx: fix missing antislash in BCM6345 ethernet patch ... This would cause build failure when disabling support for particular CPUs. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36946	2013-06-17 19:32:35 +00:00
Felix Fietkau	d3a7b5633c	kirkwood: disable the CONFIG_IP_ADVANCED_ROUTER kernel config override (#13702) ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36937	2013-06-15 11:50:50 +00:00
Hauke Mehrtens	9492d445de	brcm47xx: run make kernel_oldconfig for 3.9 kernel config ... SVN-Revision: 36928	2013-06-12 14:51:50 +00:00
Hauke Mehrtens	87f994d16d	brcm47xx: remove support for kernel 3.6 ... SVN-Revision: 36927	2013-06-12 14:48:45 +00:00
Hauke Mehrtens	990423f3ef	brcm47xx: add initial support for kernel 3.9 ... SVN-Revision: 36926	2013-06-12 14:47:53 +00:00
Steven Barth	46d199d1e8	linux: add ipv6 failed-policy routing action (by Jonas Gorski) ... SVN-Revision: 36911	2013-06-11 09:27:53 +00:00
John Crispin	76c79f50d7	lantiq: Fixes to athxk EEPROM loading ... Use platform data array for storing ath5k EEPROM instead of creating another one. EEPROM size is 2048 words (2 bytes), so we must read 4096 bytes from flash. No need to keep the checksum fix now that the EEPROM is loaded completely. Add a manual eeprom swap for ath9k and keep the endian way. Use mac-offset property retrieved from the DTS. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 36901	2013-06-10 08:25:12 +00:00
John Crispin	7638caf35d	lantiq: make kernel_oldconfig ... Seems the existing kernel config for 3.8 was cp'ed from 3.7; this patch is the result of "make kernel_oldconfig" with defaults for new options. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36900	2013-06-10 08:25:07 +00:00
John Crispin	f7daed8b9a	lantiq: diag.sh with both red and green power LEDs ... This provides a boot LED sequence suitable for devices with both red and green LEDs for power. This assumes no "default-on" settings in the device tree. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36899	2013-06-10 08:25:02 +00:00
John Crispin	fc9532aeaa	ramips: add HAME MPR-A2 support ... This patch adds support for HAME MPR-A2 router using a DTS file. The platform is Ralink RT5350. http://wiki.openwrt.org/toh/hame/mpr-a2 Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru> SVN-Revision: 36898	2013-06-10 08:24:56 +00:00
John Crispin	30786d2dd0	ramips: add support for belkin F7C027 wemo/homeautomatisation plug ... Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 36897	2013-06-10 08:24:50 +00:00
Luka Perkov	da7590cd21	lantiq: fix formating in .dts files ... Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 36882	2013-06-08 11:36:07 +00:00
Felix Fietkau	ab529a529b	ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36879	2013-06-07 13:42:50 +00:00
Felix Fietkau	1ace51360f	kernel/generic: add a few missing kernel config symbols ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36878	2013-06-07 13:42:39 +00:00
Florian Fainelli	2b9d084af9	brcm63xx: add user-space support for Netgear CVG834G ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36877	2013-06-06 22:22:20 +00:00
Florian Fainelli	42e69f45c7	brcm63xx: add kernel space and image support for the Netgear CVG834G ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36876	2013-06-06 22:22:14 +00:00
Florian Fainelli	966d47989b	brcm63xx: add Broadcom cable modem firmware format header ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36875	2013-06-06 22:22:09 +00:00
Florian Fainelli	600b59642e	brcm63xx: add support for BCM3368 ... Add support for the Broadcom BCM3368 cable modem chipset, includes: - Ethernet - SPI - UARTs - GPIOs - PCI Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36874	2013-06-06 22:21:58 +00:00
Jonas Gorski	1beaf031d1	target: don't build jffs2 nor images by default ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36863	2013-06-05 20:58:59 +00:00
Jonas Gorski	dd9a24663b	omap24xx: convert to use the new jffs2_nand ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36862	2013-06-05 20:58:55 +00:00
Jonas Gorski	e7b504ce8e	kirkwood: convert to use the new jffs2_nand ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36861	2013-06-05 20:58:53 +00:00
Jonas Gorski	9f7ef8d5f0	target: split jffs2 NAND out of jffs2 ... Make jffs2_nand a separate option so this can be triggered without forcing jffs2 images for nor targets. Adds a new NAND_BLOCKSIZE variable that allows setting the generated layout in <page_size>:<block_size> pairs. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36860	2013-06-05 20:58:03 +00:00
Imre Kaloz	799bdc990a	there's no reason to have these generic files in the bin dir either ... SVN-Revision: 36852	2013-06-05 06:46:41 +00:00
Imre Kaloz	28e8b8dc05	only copy uImages to the bin dir on ramdisk builds ... SVN-Revision: 36851	2013-06-05 06:17:12 +00:00
Imre Kaloz	e161581d45	don't copy the zImages to the bin dir, factory u-boots can't use them ... SVN-Revision: 36850	2013-06-05 06:04:48 +00:00
Gabor Juhos	5bb2e8030d	ar71xx: add support for WIFI button on tp-link tl-mr3220v2 ... The TP-LINK TL-MR3220 v2 has a button on the left side labeled "WIFI". This is GPIO 24. This patch adds the support for this button. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36848	2013-06-04 13:25:54 +00:00
Gabor Juhos	d187e3c32e	generic: add port mirroring/monitoring capability to rtl8366rb switch ... This patch adds swlib attributes to the RTL8366RB switch/PHY found in the TL-WR1043ND router that allow to mirror ethernet packets to a monitor port. Signed-off-by: Colin Leitner <colin.leitner@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36847	2013-06-04 13:25:52 +00:00
Imre Kaloz	a0e412a616	versioned files and dirs still make no sense when you support only a single kernel... ... SVN-Revision: 36836	2013-06-04 11:29:01 +00:00
Imre Kaloz	3a56df33ad	refresh patches ... SVN-Revision: 36835	2013-06-04 11:24:42 +00:00
Imre Kaloz	8170c9cfb0	add some more symbols ... SVN-Revision: 36834	2013-06-04 11:23:27 +00:00
Imre Kaloz	812bb43a47	move DT2 related kernel options into the harddist subtarget ... SVN-Revision: 36833	2013-06-04 11:19:41 +00:00
Imre Kaloz	58fa46c90c	drop support for the dns323 ... SVN-Revision: 36832	2013-06-04 11:13:18 +00:00
John Crispin	e9ef65175d	lantiq: revert [36779] as it caused a regression ... submitter was informed of a endinaess swap regression and replied with "works on my board" revert the patch and make arv7518 wifi work again Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36807	2013-05-31 13:25:07 +00:00
Gabor Juhos	da66ea52ec	ar71xx: register USB port for RB2011U* devices ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36801	2013-05-30 17:38:31 +00:00
Gabor Juhos	23bcceb058	ar71xx: create a separated network interface for the RB2011UAS SFP port ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36800	2013-05-30 17:38:30 +00:00
Gabor Juhos	151dca0935	ar71xx: make the SFP port usable on RB2011*S boards ... The port 6 of the switch is connected to the SFP cage on the RB2011*S boards. Add a helper function to correctly initialize the switch configuration data on those boards to make the SFP port usable. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36799	2013-05-30 17:38:28 +00:00
Gabor Juhos	a1f91282b4	generic: ar8216: allow to specify SGMII config via platform data ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36798	2013-05-30 17:38:26 +00:00
Gabor Juhos	c170d3c3e4	generic: ar8216: add get_port_link callback ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36797	2013-05-30 17:38:22 +00:00
Gabor Juhos	3467b17e69	ar71xx: rb2011: add switch led control values ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36796	2013-05-30 17:38:21 +00:00
Gabor Juhos	4cf6e53ccc	ar71xx: rb2011: update RGMII RX/TX delay values ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36795	2013-05-30 17:38:20 +00:00
Gabor Juhos	6da63a8793	ar71xx: rb2011: move NAND nCE init to rb2011_nand_init ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36794	2013-05-30 17:38:17 +00:00
Gabor Juhos	50c59c4797	ar71xx: add user-space support for RB2011UAS ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36793	2013-05-30 17:38:15 +00:00
Gabor Juhos	d6554bf66a	ar71xx: add kernel support for the RB2011UAS ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36792	2013-05-30 17:38:13 +00:00
Gabor Juhos	8e56b1e742	generic: ar8216: show chip revision in the kernel log ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36791	2013-05-30 16:25:14 +00:00
Gabor Juhos	d19dae6e2d	ar71xx: add profile and build image for the Archer C7 board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36790	2013-05-30 16:23:10 +00:00
Gabor Juhos	35b5b38316	ar71xx: add user-space support for TP-LINK Archer C7 board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36789	2013-05-30 16:23:09 +00:00
Gabor Juhos	91d7c3efc1	ar71xx: add kernel support for the TP-LINK Archer C7 board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36788	2013-05-30 16:23:07 +00:00
Gabor Juhos	f02765086d	ar71xx: add USB workarounds for AR934x/QCA955x SoCs ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36787	2013-05-30 16:23:06 +00:00
Gabor Juhos	6ff976a87a	ar71xx: add profile and build image for the DIR-601-B1 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36786	2013-05-30 16:19:30 +00:00
Gabor Juhos	424c4c0b0a	ar71xx: allow to build CameoHornet images for multiple regions ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36785	2013-05-30 16:19:29 +00:00
Gabor Juhos	184dd34b6d	ar71xx: allow to override fw version in CameoHornet profile ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36784	2013-05-30 16:19:28 +00:00
John Crispin	e60cb01c45	lantiq: ARV752DPW: fix reboot loop caused by wrong GPIO setting ... The GPIO buttons of ARV752DPW are active low. Treating them as active high caused a reboot loop as a reset-button press is detected by gpio-button-hotplug/gpio-keys-polled on startup. This fixes: https://dev.openwrt.org/ticket/12642 Signed-off-by: Rafael Gieschke <rafael@gieschke.de> SVN-Revision: 36783	2013-05-30 16:01:06 +00:00
John Crispin	c2b1e9eeef	lantiq: Fix ar8216 switch configuration ... On linux 3.8 the switch is named as "switch0", but the network configuration script names it as "eth0", causing no communication over ethernet due to no proper VLAN config. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 36782	2013-05-30 16:00:59 +00:00
John Crispin	090a75447b	lantiq: DGN3500 support ... This requires all the preceding patches and finishes support for the DGN3500, also removing an obsolete file. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36781	2013-05-30 16:00:50 +00:00
John Crispin	a9968d9cb8	lantiq: enable retrieving kernel args from bootloader ... This patch is a device tree enhancement that IMHO is worthy of mainline. It allows the bootloader's commandline to be preserved even when the device tree specifies one. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36780	2013-05-30 16:00:42 +00:00
John Crispin	d1f3751d05	lantiq: wifi calibration from MTD ... This patch enables retrieving the wifi calibration data from an MTD partition. It requires the previous patch. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36779	2013-05-30 16:00:32 +00:00
John Crispin	83c3cd4ed9	lantiq: postpone PCI and wifi init ... This postpones the initialization of PCI and wifi until after the MTD initialization, so that calibration data may be loaded from there. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36778	2013-05-30 16:00:24 +00:00
John Crispin	b585923cc9	lantiq: fix LED-handling oversights ... This reassigns the PPPoE status to the LED that was intended to indicate it, rather than the DSL sync light. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36777	2013-05-30 16:00:15 +00:00
John Crispin	1756047518	ramips: set correct description for rt305x subtarget ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36775	2013-05-30 15:59:56 +00:00
Luka Perkov	4b21af4268	imx6: add new target ... SVN-Revision: 36753	2013-05-29 01:27:29 +00:00
Luka Perkov	846e3d40a0	kernel: generic: remove upstream patches for 3.10-rc3 and refresh patches ... SVN-Revision: 36752	2013-05-29 01:27:27 +00:00
Gabor Juhos	c4d0a49348	ar71xx: typo in detect TL-MR10U/TL-MR11U ... At offset 0x40, signature for TL-MR10U/TL-MR11U begin from 0x00, not 0x10/0x11. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36727	2013-05-26 16:38:00 +00:00
Gabor Juhos	cc7bedf8a3	ar71xx: fix TL-MR10U usb power ... MR10U is closer to MR3040 than WR703N. This changes also enable USB power on GPIO18. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36726	2013-05-26 16:37:59 +00:00
Gabor Juhos	7d2182c455	kernel: update linux 3.9 to 3.9.4 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36725	2013-05-26 16:02:34 +00:00
Gabor Juhos	46225b99d9	kernel: update linux 3.8 to 3.8.13 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36724	2013-05-26 16:02:31 +00:00
Gabor Juhos	93ce462b7e	ar71xx: set eth0 mac address to match bottom label of the OM2P LC ... Signed-off-by: marek@open-mesh.com CC: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36723	2013-05-26 16:02:29 +00:00
Gabor Juhos	0842478e44	ar71xx: add TP-LINK TL-MR10U ... Small router with 4MB flash, 32MB RAM http://www.tp-link.com.cn/product_300.html Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36722	2013-05-26 16:02:26 +00:00
Luka Perkov	0998065a53	generic: ar8216: add port mirroring ... Tested on Buffalo WZR-600DHP with ar8316 switch. Commands used to mirror both RX and TX traffic from LAN port 1 to LAN port 4: $ swconfig dev switch0 set enable_mirror_rx 1 $ swconfig dev switch0 set enable_mirror_tx 1 $ swconfig dev switch0 set mirror_monitor_port 4 $ swconfig dev switch0 set mirror_source_port 1 Signed-off-by: Colin Leitner <colin.leitner@googlemail.com> Tested-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 36713	2013-05-24 13:10:22 +00:00
Felix Fietkau	fe7e52e4a4	ar71xx: disable jffs2 by default, it confuses users since many devices have incompatible eraseblock sizes ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36679	2013-05-21 09:45:46 +00:00
Jonas Gorski	a01be4a217	kernel: update 3.9 to 3.9.3 ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36676	2013-05-20 16:57:00 +00:00
Jonas Gorski	3ac261cd21	ar7: drop obsolete 3.3 support ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36674	2013-05-20 12:42:44 +00:00
Jonas Gorski	334e6d4e0c	ar7: drop obsolete 3.6 support ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36673	2013-05-20 12:42:41 +00:00
Jonas Gorski	49c81c6e00	ar7: switch to 3.9 ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36672	2013-05-20 12:42:38 +00:00
Jonas Gorski	c4b943c82c	ar7: add support for 3.9 ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36671	2013-05-20 12:42:36 +00:00
Jonas Gorski	4d0fcd0c49	kernel: add some missing symbols/move them to generic ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36670	2013-05-20 12:42:32 +00:00
Jonas Gorski	b751b5893c	brcm2708: make it boot on revision 2 raspberry pis ... * update the bootcode.bin to the newest version - gpu/cpu mem split is now configured through config.txt, so no need to create more than one sd card image (just edit the config.txt) - bootcode.bin now supports the never revision 2 raspberry pis * add a commented prepopulated config.txt for easier config changes Taken from <https://github.com/Evilpaul/RPi-config> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36668	2013-05-20 12:07:03 +00:00
Jonas Gorski	c0435a971e	kernel: generic: add 3.10-rc1 support ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36663	2013-05-19 18:36:15 +00:00
Jonas Gorski	0a62b7c148	bcm63xx: add 3.9 support ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36660	2013-05-19 18:32:13 +00:00
Jonas Gorski	1f4e5f77a0	bcm63xx: Simplify CFE detection. ... Check bootloader argument in mtd. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo@openwrt.org: split into two patches, one for detection, one letting bcm63xxpart use it.] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36659	2013-05-19 18:32:02 +00:00
Jonas Gorski	6e2b85b401	kernel: update 3.9 to 3.9.2 ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36658	2013-05-19 18:31:51 +00:00
Jonas Gorski	668604f91d	kernel: don't remove of_tables ... These are needed for OF setup of clocksource, clocks and irqchips. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36657	2013-05-19 11:27:28 +00:00
Felix Fietkau	56478636aa	ar71xx: remove the xfrm.h chunk from the unaligned access hacks, it breaks ipsec ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36646	2013-05-17 07:31:00 +00:00
Felix Fietkau	144cfb65a4	ar71xx: add hard_cfg offset detection for rb2011 support - fixes wlan on some newer devices ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36631	2013-05-13 19:13:33 +00:00
Felix Fietkau	2c5a5d8736	kernel: add missing PHY ID for an AR8327 switch variant ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36630	2013-05-13 19:13:27 +00:00
Felix Fietkau	eea89fea6a	build: add config symbols for different ARM arch levels ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36620	2013-05-13 15:04:58 +00:00
Jonas Gorski	526aedb705	kernel: move CONFIG_MIPS_SEAD3 to generic ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36617	2013-05-12 21:41:55 +00:00
Jonas Gorski	ed06d2ad5c	bcm63xx: don't build CRAMFS ... Don't build the CRAMFS file system module in the kernel, and save some bytes. No bcm63xx board needs this obsolete file system, neither those ones using the Redboot bootloader (liveboxes). Thus, there is no need to build it, since it has been replaced long time ago by squashfs. Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> SVN-Revision: 36616	2013-05-12 21:41:52 +00:00
Jonas Gorski	ccd7fbba87	led and buttons support for board DWV-S0 ... Signed-off-by: Gianluca Agliozzo <gianluca05@hotmail.it> [jogo@openwrt.org: fixup patch so it actually applies] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36615	2013-05-12 21:41:50 +00:00
Jonas Gorski	0a907fdb8a	bcm63xx: remove defconfig support ... All boards use uci-defaults, no need to keep defconfig support. SVN-Revision: 36610	2013-05-12 11:54:38 +00:00
Jonas Gorski	bbd02c6fb7	kernel: fix CVE-2013-1763 in older kernels ... Newer kernels were already fixed by upstream. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36607	2013-05-12 10:55:12 +00:00
Felix Fietkau	0be8dd36dc	ar71xx: set mips16 support, tune cflags for 34kc (works well on MIPS 24K as well, but helps a lot for 34K and 74K) ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36600	2013-05-09 23:32:46 +00:00
Jonas Gorski	0b03ff2028	kernel: make zlib and lzo modules selectable ... Fixes building kmod-lib-zlib and kmod-lib-lzo if nothing depends on them. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36592	2013-05-09 20:50:07 +00:00
Hauke Mehrtens	0b161c6f9e	kernel: b53: use correct oops for bcm5365 switch ... SVN-Revision: 36589	2013-05-09 20:01:58 +00:00
Jonas Gorski	98f6dc1b43	kernel: allow building zsmalloc as a module again ... zsmalloc was changed to a bool because of missing exports in the kernel, but we already export the required symbol, so change it back to tristate. Closes #13481. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36587	2013-05-09 19:19:36 +00:00
Gabor Juhos	cb3d71ca8e	ar71xx: use combined kernel image in the CameoHornet template ... This allow us to increase the kernel partition size, and ensures, that the -factory image still usable via the original interface. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36584	2013-05-08 17:11:10 +00:00
Gabor Juhos	f938a798f8	ar71xx: add profile and build image for the RNX-N360RT board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36582	2013-05-08 17:07:19 +00:00
Gabor Juhos	852b8e9490	ar71xx: add user-space model detection for the RNX-N360RT board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36581	2013-05-08 17:07:18 +00:00
Gabor Juhos	c70694e755	ar71xx: add profile and build image for Netgear WNDAP360 ... [juhosg: this has been created from the following patch: http://patchwork.openwrt.org/patch/3620/ ] Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36580	2013-05-08 17:03:43 +00:00
Gabor Juhos	33a2cbfd5c	ar71xx: add user-space support for Netgear WNDAP360 ... [juhosg: this has been created from the following patch: http://patchwork.openwrt.org/patch/3620/ ] Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36579	2013-05-08 17:03:42 +00:00
Gabor Juhos	10b3ca5ccb	ar71xx: add kernel support for Netgear WNDAP360 ... Here is corrected version (only thing not working are wifi LEDs). [juhosg: this has been created from the following patch: http://patchwork.openwrt.org/patch/3620/ ] Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36578	2013-05-08 17:03:34 +00:00
Gabor Juhos	39467e78e7	kernel: update linux 3.9 to 3.9.1 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36577	2013-05-08 08:53:55 +00:00
Gabor Juhos	e57c7d6c12	kernel: update linux 3.8 to 3.8.12 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36576	2013-05-08 08:53:53 +00:00
Gabor Juhos	d09ba5ef10	ar71xx: Fix AP135 partition layout ... Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36575	2013-05-08 08:53:49 +00:00
John Crispin	eb10f052ce	lantiq: enable portmaps again and set max port to 2 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36573	2013-05-07 10:58:52 +00:00
John Crispin	036fb79052	ramips: drop 3.7 support ... Signed-off-by; John Crispin <blogic@openwrt.org> SVN-Revision: 36572	2013-05-07 10:58:44 +00:00
John Crispin	16a17b318a	ramips: properly setup the FEATURES variable ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36571	2013-05-07 10:58:30 +00:00
John Crispin	bd6e12d904	ramips: fix memory detection rt5350 ... Signed-off-by: Felix Kaechele <felix@fetzig.org> SVN-Revision: 36568	2013-05-06 18:23:56 +00:00
John Crispin	899120ddef	ramips: enable dsp extensions for rt305x and rt3883 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36567	2013-05-06 16:45:59 +00:00
John Crispin	849ff98669	ramips: fix fypo in ethernet driver rt288x, rt3883 ... Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 36565	2013-05-06 16:45:43 +00:00
John Crispin	eddd7f5773	ramips: Update ARC Freestation profile ... These devices are actually built around the 8devices Carambola dev board. ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are supported with this image, see "ARCFlex Firmware Downloads": http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History Funnily enough if present the external USB wlan ends up being wlan-0, with the SoC device being wlan-1. - Invert port map so special handling of vlan config can be removed. - Add LED config similar to original ArcOS firmware. - Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1 - Get MACs from factory partition. - Update description to list supported devices. - Carambola uses RT3050 (not RT3052), though my Carambola CPU actually reports itself as being an RT3350 while still having RT3050F markings. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36564	2013-05-06 16:45:35 +00:00
John Crispin	4f1ff28f08	ramips: Support setting active_low in devicetree gpio-export ... Support setting active_low in devicetree gpio-export. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36563	2013-05-06 16:45:27 +00:00
John Crispin	6af3b6721b	ralink: unbreak uart pinmux handling ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36562	2013-05-06 16:45:20 +00:00
John Crispin	7c04b3bd66	ramips: fix gpio base numbering ... make banks 0 based to unbreak userland ABI Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36561	2013-05-06 16:45:12 +00:00
John Crispin	338ff04cab	ramips: add gpio base properties to dtsi files ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36560	2013-05-06 16:45:04 +00:00
John Crispin	65760ede8b	ramips: unbreak rt2880 support ... Signed-off-by: John Crsipin <blogic@openwrt.org> SVN-Revision: 36559	2013-05-06 16:44:56 +00:00
John Crispin	28bdb9efe9	ramips: fix DIR-602D1 flash size ... Fix DIR-620D1 flash size. Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 36558	2013-05-06 16:44:47 +00:00
John Crispin	1c89a60431	ramips: unbreak gpio handling for uart mux group ... this should fix the handling of corner cases Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36543	2013-05-04 11:36:51 +00:00
Gabor Juhos	bb429757c8	at91: build .dtb file for the CalAmp LMU500 board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36542	2013-05-03 19:01:00 +00:00
Gabor Juhos	ccf95fe938	ar71xx: Fix AP135 PCI ... AP135 has a pluggable PCIE slot unlike AP136. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36541	2013-05-03 19:00:58 +00:00
Felix Fietkau	18c588a570	ar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce the frequency of DMA stop failures ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36530	2013-05-03 09:12:19 +00:00
Felix Fietkau	30c4360345	kernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is used by iproute2 ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36529	2013-05-02 15:59:57 +00:00
Jonas Gorski	24636fcabf	bcm63xx: split into two subtargets, generic and SMP ... Make SMP a subtarget, since it only supports BCM6362 and BCM6368. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36527	2013-05-02 15:28:31 +00:00
Jonas Gorski	d11efa1428	bcm63xx: add SMP support for BCM6362 and BCM6368 ... BCM6358 requires further work due to its shared TLB. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36526	2013-05-02 15:28:26 +00:00
Jonas Gorski	8f15326acc	kernel: generic: don't strip /proc/irq on SMP ... /proc/irq is needed for changing the SMP affinity of interrupts. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36525	2013-05-02 15:28:12 +00:00
Jonas Gorski	a80a4f3ec2	bcm63xx: fix hsspi flash registration for BCM6362 ... Use busnum 1 for HSSPI so it won't conflict on chips having both SPI controllers. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36524	2013-05-02 15:28:10 +00:00
Jonas Gorski	999a956f4c	bcm63xx: fix/enable livebox minipci ... Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> SVN-Revision: 36523	2013-05-02 15:28:07 +00:00
Jo-Philipp Wich	6ac2b3b76a	atheros: remove static gpio_request() from board setup and include generic kmod-gpio-button-hotplug instead. ... This change is based on a patch by Karl Palsson <karlp@remake.is> See http://patchwork.openwrt.org/patch/3536/. SVN-Revision: 36513	2013-05-02 11:46:53 +00:00
Gabor Juhos	8a9fe26f20	kernel: update linux 3.8 to 3.8.11 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36507	2013-05-01 22:15:18 +00:00
Florian Fainelli	db02b0e4ee	brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch ... And while at it, also include a define check for BCM6328, thanks to Gabor for spotting this. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36506	2013-05-01 21:52:25 +00:00
Florian Fainelli	292368409e	brcm63xx: add missing binary operands to BCM6345 ethernet patch ... Thanks to Emilio Arias for reporting it. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36505	2013-05-01 21:12:40 +00:00
Florian Fainelli	6f48ccea02	brcm63xx: remove 3.7 kernel support ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36504	2013-05-01 21:12:26 +00:00
Gabor Juhos	0ae43dbe9d	ar71xx: rename WNR2000v3 support patch ... Update the numbering of kernel patch for supporting Netgear WNR2000v3 from 617 to 618. Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36498	2013-04-30 10:44:11 +00:00
Gabor Juhos	d557a51a40	x86/geos: switch to 3.8.10 ... Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36496	2013-04-30 10:44:09 +00:00
Gabor Juhos	0fa71ca3e5	linux/3.9: implement pcibios_get_phb_of_node for MIPS ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36495	2013-04-30 10:44:08 +00:00
Gabor Juhos	41445b41cc	linux/3.8: use backported pcibios_get_phb_of_node patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36494	2013-04-30 10:44:07 +00:00
Gabor Juhos	f718179af5	kernel: update linux 3.8 to 3.8.10 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36493	2013-04-30 10:43:59 +00:00
Gabor Juhos	8e466dcdf4	at91: add missing config symbols ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36492	2013-04-30 10:43:58 +00:00
Gabor Juhos	d35545f3d7	linux/3.{8,9}: add missing symbols ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36491	2013-04-30 10:43:57 +00:00
Gabor Juhos	25c45c0d53	linux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODEL ... It is forced to 'y' since r36342. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36490	2013-04-30 10:43:56 +00:00
John Crispin	eff12a630d	ramips: move dlink profile to correct sub folder - 2nd try ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36489	2013-04-30 10:34:20 +00:00
John Crispin	1db4587bc7	ramips: move dlink profile to correct sub folder ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36487	2013-04-30 08:24:26 +00:00
Hauke Mehrtens	ca7f9638d5	broadcom-diag: support for the WNDR3700v3 ... I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the bootloader and stock firmware will accept. The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving its LEDs through an HC164 8-bit shift register. Signed-off-by: Owen Kirby <osk@exegin.com> SVN-Revision: 36482	2013-04-28 21:11:17 +00:00
Hauke Mehrtens	7dee0dae35	brcm47xx: use kernel 3.8.10 as default kernel ... The biggest change with this kernel is a new partition parser. SVN-Revision: 36480	2013-04-28 18:25:16 +00:00
Hauke Mehrtens	00a7ace7cf	brcm47xx: add board detection for NETGEAR WNDR4500 V2 ... SVN-Revision: 36478	2013-04-28 18:19:31 +00:00
Hauke Mehrtens	e7e4afbb64	kernel: fix a memory leak in split_rootfs_data() ... allocate_partition() copies all the content of dpart into a new struct. SVN-Revision: 36475	2013-04-28 17:01:56 +00:00
Hauke Mehrtens	1bac172c44	kernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing master-2013-04-26. ... SVN-Revision: 36473	2013-04-28 16:52:11 +00:00
Jonas Gorski	ad1d3f00cb	kernel: update linux 3.9 patches to rc8 ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36469	2013-04-28 11:55:23 +00:00
Jonas Gorski	a33dd13c98	kernel: add missing bcma defines and header file for bcrmfmac ... Fixes build failure when having kmod-mmc and brcmfmac selected. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36468	2013-04-28 11:10:42 +00:00
Gabor Juhos	7c2632fbc5	ar71xx: add user-space support for WNR2000v3 ... Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36461	2013-04-26 17:00:54 +00:00
Gabor Juhos	b29b7b65ea	ar71xx: add profile and build image for WNR2000v3 ... Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36460	2013-04-26 17:00:53 +00:00
Gabor Juhos	9b3c0d11a2	ar71xx: Add Netgear WNR2000v3 support ... Network connectivity works fine (LAN and WAN). For GPIOs, only pwr led and the green wan leds are supported for now. Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36459	2013-04-26 17:00:52 +00:00
Gabor Juhos	183e2af1c7	ar71xx: add profile and build image for the TL-WR720N v3 board ... Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36458	2013-04-26 17:00:50 +00:00
Gabor Juhos	7c4e2c1f72	ar71xx: add user-space support for the TL-WR720N v3 board ... Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36457	2013-04-26 17:00:49 +00:00
Gabor Juhos	5c11773f8a	ar71xx: add kernel support for TPLINK WR720N v3 ... Add support for TPLINK WR720N v3 which has 4MB flash, 32MB ram, 2 ethernet interfaces, 1 USB 2.0 port. The patch is mostly a modification from mach-tl-wr703n.c. GPIO numbers for the slider switch is from mach-tl-mr3020n.c. Tested on my device and they worked fine. Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36456	2013-04-26 17:00:48 +00:00
Gabor Juhos	c0691e29f1	mpc85xx: Add subtargets Generic and P1020 ... Only difference between Generic and P1020 is that P1020 enables SMP with two CPUs in the kernel config. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36454	2013-04-26 16:57:43 +00:00
Gabor Juhos	36d4fd70bc	kernel: update linux 3.8 to 3.8.9 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36453	2013-04-26 16:55:42 +00:00
Gabor Juhos	988ae9cbf8	at91: upgrade to kernel 3.8.7 and use devicetree ... This upgrades the AT91 target to 3.8.7, and migrates to device tree. This allows a single kernel to be built for most at91 variants which simplifies things quite a bit. The immediate result is that all subtargets are nuked, and any boards without dts files are no longer supported, though the target now includes more boards than before. The adc driver was also nuked as 3.8.7 includes a new one under the IIO subsystem. Signed-off-by: Adam Porter <porter.adam@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36452	2013-04-26 16:55:40 +00:00
Gabor Juhos	c63bb1a18e	ramips: rt3883: fix build error ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36451	2013-04-26 16:55:28 +00:00
John Crispin	b42a173664	lantiq: make leds and network work on VG3503J ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36445	2013-04-25 19:03:41 +00:00
John Crispin	520bf46375	lantiq: fix board detection helpers ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36444	2013-04-25 19:03:37 +00:00
John Crispin	157c86371f	lantiq: move dts files to thir own folder ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36443	2013-04-25 19:03:32 +00:00
John Crispin	4664e21293	generic: fix rtl8366_smi compile warning ... drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_sw_set_vlan_ports': drivers/net/phy/rtl8366_smi.c:1125:6: warning: 'pvid' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36442	2013-04-25 19:03:29 +00:00
John Crispin	9ae3adbe3c	lantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36441	2013-04-25 19:03:25 +00:00
John Crispin	d3d18ae812	lantiq: make lzma-loader based images for VG3503J ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36440	2013-04-25 19:03:21 +00:00
John Crispin	a46acc80e4	lantiq: update VG3503J.dts to match new partition layout ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36439	2013-04-25 19:03:17 +00:00
John Crispin	46306c2e47	lantiq: add lzma-loader source ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36438	2013-04-25 19:03:13 +00:00
John Crispin	e141b73f9d	ramips: remove now unneeded user-space board detection ... Now that ALL5002 and ALL5003 each got their own DTS and board names, remove the now no longer needed user-space part which previously differentiated between ALL5002 and ALL5003. Signed-off-by: Daniel Golle <dgolle@allnet.de> Patchwork: http://patchwork.openwrt.org/patch/3558/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36436	2013-04-25 19:03:05 +00:00
John Crispin	cf3885eb0f	ramips: introduce DTS for ALL5003 ... Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c. With the change to DTS, this is no longer accurate, as ALL5002 is based on Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding rt5350.dtsi need to be included for ALL5003. Signed-off-by: Daniel Golle <dgolle@allnet.de> Patchwork: http://patchwork.openwrt.org/patch/3557/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36435	2013-04-25 19:03:01 +00:00
John Crispin	978567a89e	ramips: set preinit interface to eth0 by default. ... This makes any ramips device accessible via ethernet in failsafe mode. Based on: https://dev.openwrt.org/changeset/36322 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3567/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36434	2013-04-25 19:02:57 +00:00
John Crispin	7bfab6e308	ramips: Add Alpha ASL-26555 support. ... This board uses a TrendChip SOC with its own RAM/Flash for ADSL support. We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN. There are two versions (Chile 8MB and Spain 16MB). Wiki: http://wiki.openwrt.org/toh/alpha/asl26555 Signed-off-by: Esteban Benito <estebanjbs@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3571/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36433	2013-04-25 19:02:53 +00:00
John Crispin	c7216d0cab	ramips: Add support of D-link DIR-620D1 ... Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36432	2013-04-25 19:02:48 +00:00
John Crispin	deb3635923	ramips: sync kernel patches with the mips-next tree ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36431	2013-04-25 19:02:42 +00:00
John Crispin	831c7ea04f	preinit: move cmdline failsafe= handling ot the generic code ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36430	2013-04-25 19:02:37 +00:00
Jonas Gorski	90986b5581	bcm63xx: update patches with upstream submissions ... SVN-Revision: 36407	2013-04-23 13:55:36 +00:00
Jonas Gorski	2a1a16d2d5	bcm63xx: switch to linux 3.8 ... SVN-Revision: 36406	2013-04-23 13:55:17 +00:00
Steven Barth	4e8f7f37ed	Change default IPv6 config to enable DHCPv6-PD ... SVN-Revision: 36384	2013-04-22 19:40:16 +00:00
Felix Fietkau	a8a01b42ae	kernel: allow __netdev_alloc_skb_ip_align to be called with dev = NULL ... SVN-Revision: 36378	2013-04-22 15:01:36 +00:00
Felix Fietkau	cd35ea2174	ar71xx: merge more unaligned access hacks from cerowrt-next ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36374	2013-04-22 12:53:21 +00:00
Felix Fietkau	f58dcb59c6	kernel: backport SSB/BCMA changes in preparation for a compat-wireless update ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36367	2013-04-19 12:39:40 +00:00
Gabor Juhos	f03960723a	linux/3.9: add missing config symbol ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36365	2013-04-19 08:07:38 +00:00
Gabor Juhos	e07848664c	linux/3.[89]: update bridge_remove_ipv6_dependency patch ... Fixes the following warning: CC [M] net/ipv6/addrconf.o net/ipv6/addrconf.c: In function 'addrconf_init': net/ipv6/addrconf.c:4944:2: warning: assignment from incompatible pointer type [enabled by default] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36364	2013-04-19 08:07:37 +00:00
Gabor Juhos	151cadfe32	kernel: update linux 3.8 to 3.8.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36363	2013-04-19 08:07:34 +00:00
Felix Fietkau	96bb7c123b	build: consistently use 'depends on' instead of 'depends' ... make the syntax more compatible with kernel menuconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36351	2013-04-17 15:36:41 +00:00
John Crispin	e3003ea2a9	fix prepare_generic_squashfs ... prepare_generic_squashfs was called twice on the generated images breaking mount_root Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36349	2013-04-17 11:54:09 +00:00
John Crispin	8001e6a689	fix rt305x gpio ... https://dev.openwrt.org/ticket/13359 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36343	2013-04-16 06:58:18 +00:00
Felix Fietkau	a662200205	kernel: force CONFIG_NET_SCHED=y for fq_codel (#13360) ... SVN-Revision: 36342	2013-04-15 20:40:29 +00:00
Imre Kaloz	57b68daee9	refresh against -rc7 ... SVN-Revision: 36340	2013-04-15 16:10:01 +00:00
Gabor Juhos	604395650a	kernel: update linux 3.8 to 3.8.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36332	2013-04-14 09:25:53 +00:00
Gabor Juhos	68c54dc34f	mpc85xx: use static SPI bus number for TL-WDR4900 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36329	2013-04-12 19:44:41 +00:00
Gabor Juhos	54635e7f78	linux/3.8: backport 'spi/of: Use DT aliases for assigning bus number' from 3.9 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36328	2013-04-12 19:44:38 +00:00
John Crispin	d3a46c4b7f	update rt2880 config-3.8 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36327	2013-04-12 18:57:01 +00:00
John Crispin	92259c4803	fix up the rt2880 patches ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36326	2013-04-12 18:56:53 +00:00
John Crispin	a6424245e6	fix RT-N15 support ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36325	2013-04-12 18:56:44 +00:00
John Crispin	7af1fa46ad	update rt2880.dtsi ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36324	2013-04-12 18:56:36 +00:00
John Crispin	10f432ba9d	fix rtl8366s OF binding ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36323	2013-04-12 18:56:05 +00:00
Gabor Juhos	687b3f04ce	mpc85xx: set preinit interface to eth0 by default ... This makes the WDR4900 accessible via ethernet in failsafe mode. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36322	2013-04-12 18:30:25 +00:00
Gabor Juhos	40e15b1fbf	mpc85xx: Generate fdt for P1020RDB ... Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36321	2013-04-12 18:30:24 +00:00
Gabor Juhos	f43bdf34cd	mpc85xx: Add P1020RDB board support ... Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36320	2013-04-12 18:30:22 +00:00
John Crispin	d5f87e193c	add VG3503J support ... this adds basic support. the bootloader on these units is locked down. until we have a replacement we can do basic testing with these env variables in uboot. set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize) set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000 unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle. please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36315	2013-04-11 19:18:07 +00:00
John Crispin	fbc1e3732b	add FE phy firmware ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36314	2013-04-11 19:17:48 +00:00
John Crispin	0d32469457	add missing pinmux patch ... Fix lantiq pinmux which affected PCI and USB. Known affected boards are: ARV4518 and ARV7518. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 36312	2013-04-11 07:12:37 +00:00
Felix Fietkau	6436b3f736	cns3xxx: fix USB ehci/ohci platform driver ... Update ehci/ohci driver registration to conform to the new platform drivers. This fixes missing USB host support in 3.8.x Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 36309	2013-04-10 16:20:50 +00:00
Felix Fietkau	edd8048107	kernel: calibrate the TWD timer even when booting with only one CPU, it is used for the watchdog timer base ... Fixes booting on single-core CNS3xxx devices Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36308	2013-04-10 16:07:50 +00:00
Felix Fietkau	06733c2650	kernel: keep the igmp proc support even with PROC_STRIPPED, some tools still use it ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36307	2013-04-10 13:45:12 +00:00
Felix Fietkau	7fa2957103	kernel: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36304	2013-04-10 13:11:29 +00:00
Felix Fietkau	df3d4690bd	kernel: keep dropped stats in fq_codel ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36303	2013-04-10 13:11:25 +00:00
Felix Fietkau	ec3a8846fc	kernel: tune fq_codel defaults for common netdevice speeds ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36302	2013-04-10 13:11:21 +00:00
Felix Fietkau	307965026a	kernel: add patches by Dave Täht to reduce buffer size in longer queues to reduce memory pressure ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36301	2013-04-10 13:11:16 +00:00
Florian Fainelli	915969ff2c	kernel: refresh patches against 3.9-rc6 ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36297	2013-04-09 16:16:20 +00:00
Florian Fainelli	c3366cd164	kernel: add support for PMC PM25LQ032 SPI Flash in m25p80.c ... Add support for PMC PM25LQ032 (4MB) SPI Flash used in Hame MPR-A1 and clones. Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36296	2013-04-09 16:16:16 +00:00
Florian Fainelli	518d6a9273	kernel: backport switch user API changes after r36283 ... 3.3 and 3.6 kernels do not make use of the UAPI headers, still they need to provide an up-to-date switch.h copy for swconfig to build. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36295	2013-04-09 15:47:01 +00:00
John Crispin	fb47fd0d6b	unbreak portmapping - typo fix ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36293	2013-04-09 14:39:01 +00:00
John Crispin	bc7b310959	move memory detect node to dtsi files ... Signed-of-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36290	2013-04-09 14:19:36 +00:00
John Crispin	48feea4861	Add Netgear WNCE2001 (OF version) ... Add Netgear WNCE2001. This is a small RT3052 device with 4MB spi flash and 32MB ram. 2 built-in antennas, 1x fastE, no USB, reset & wps switch. On my model the AP/RT switch is unpopulated, but I verified the gpio mapping for it. The stock firmware is running an unprotected tftpd which allows you to read any file from the filesystem. Serial port is present on testpads (See image on the wiki page). There are more testpads below the shield near the SoC, which may have JTAG. Slight annoyance: The bootloader is checksumming kernel&rootfs, but can be tricked by zeroing checksum and length fields in the checksum partition, see target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming The manufacturer image is very similar to the DAP one, so I slightly modified mkdapimg to support generating it. The resulting openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin can be used to flash from stock to OpenWRT using the stock firmware upgrade function, without using the serial port. http://www.netgear.com/landing/wnce2001.aspx http://wiki.openwrt.org/toh/netgear/wnce2001 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36289	2013-04-09 14:19:33 +00:00
John Crispin	e468abcae0	remove bootargs from dts ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36288	2013-04-09 14:19:28 +00:00
John Crispin	82c3b7ce26	add ofpart info to the devicetrees ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36287	2013-04-09 14:19:24 +00:00
John Crispin	f1e9d30ffc	add sample swconfig portmap ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36286	2013-04-09 14:19:20 +00:00
John Crispin	fcd962cc71	set of_node before registring the switch ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36285	2013-04-09 14:19:17 +00:00
John Crispin	fff58a5801	allow loading port maps from OF ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36283	2013-04-09 14:19:09 +00:00
Steven Barth	ea94d66b0f	Adapt default network configuration for IPv6 ... SVN-Revision: 36278	2013-04-09 08:03:08 +00:00
Gabor Juhos	130f67210a	ramips: TEW-691GR.dts fixes ... * fix pinmux settings * remove spi node * add nor-flash node * enable mdio-bus and add phy handle Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36276	2013-04-08 12:34:17 +00:00
Gabor Juhos	a4a148f222	ramips: rt3883: enable the AR8216 driver ... It is needed for the TEW-69{1,2}GR boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36275	2013-04-08 12:34:15 +00:00
Gabor Juhos	a9d977b2af	ramips: add profile for the Omnima EMB-HPM board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36274	2013-04-08 11:12:04 +00:00
Gabor Juhos	82705b30b3	ramips: OMNI-EMB-HPM.dts fixes ... * add mdio-bus and phy nodes * set phy-handle for the ethernet node * define flash partiions * cleanup flash node properties Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36273	2013-04-08 11:12:03 +00:00
Gabor Juhos	909fabe574	ramips: add mdio-bus node to rt3883.dtsi ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36272	2013-04-08 11:12:02 +00:00
Gabor Juhos	78ee80f2e8	ramips: fix MDIO/PHY handling ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36271	2013-04-08 11:12:01 +00:00
Gabor Juhos	30e5bae84a	ramips: fix console speed for OMNI-EMB-HPM ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36270	2013-04-08 08:24:51 +00:00
Gabor Juhos	cd7ce5226d	ramips: avoid invalid pointer dereference in pinmux code ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36269	2013-04-08 08:24:50 +00:00
Gabor Juhos	4c85227cf4	ramips: TEW-692GR.dts fixes ... * fix pinmux settings * remove spi node * add PCI node * add nor-flash node Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36268	2013-04-08 07:11:35 +00:00
Gabor Juhos	97635d7a8e	ramips: add PCI node into RTN56U.dts ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36264	2013-04-07 20:56:22 +00:00
Gabor Juhos	474264f64c	ramips: add PCI node for rt3883.dtsi ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36263	2013-04-07 20:56:21 +00:00
Gabor Juhos	6c8951313c	ramips: rt3883: enable PCI support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36262	2013-04-07 20:56:20 +00:00
Gabor Juhos	b6b0a8fbee	ramips: fix RT3883 PCI driver ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36261	2013-04-07 20:56:18 +00:00
Gabor Juhos	1700bf5b2e	ramips: refresh patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36260	2013-04-07 17:05:05 +00:00
Gabor Juhos	6de8743e44	ramips: add missing cpu-feature-override.h files ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36259	2013-04-07 17:05:04 +00:00
Gabor Juhos	68875710fd	ramips: fix broken patch name ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36258	2013-04-07 16:26:27 +00:00
Gabor Juhos	16d0ce52b0	ramips: fix polarity of GPIO buttons for RT-N56U ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36257	2013-04-07 16:24:33 +00:00
Gabor Juhos	9e6ae6ab5d	x86/generic: remove old kernel configs ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36256	2013-04-07 15:53:17 +00:00
Gabor Juhos	0d0bfe3d41	x86/generic: switch to 3.8 ... Only tested within a VM. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36255	2013-04-07 15:53:15 +00:00
Gabor Juhos	f5d28ea3ce	x86/generic: add config for 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36254	2013-04-07 15:53:13 +00:00
Gabor Juhos	71a51e3b91	x86/alix2: remove old kernel configs ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36253	2013-04-07 15:53:11 +00:00
Gabor Juhos	15d311ec18	x86/alix2: switch to 3.8 ... Tested on an alix2d13 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36252	2013-04-07 15:53:09 +00:00
Gabor Juhos	9d05b1b683	x86/alix2: add config for 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36251	2013-04-07 15:53:08 +00:00
Gabor Juhos	89f690843f	x86: add support for 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36250	2013-04-07 15:53:05 +00:00
Gabor Juhos	d1f28c6d1f	ramips: add nor-flash node for the RT-N56U ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36249	2013-04-07 14:46:11 +00:00
Gabor Juhos	0c3c29ca38	ramips: fix pinmux settings for the RT-N56U ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36248	2013-04-07 14:46:10 +00:00
Gabor Juhos	66fbe78a93	ramips: pinmux fixes ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36247	2013-04-07 14:46:09 +00:00
Gabor Juhos	aedf05caa0	ramips: remove trailing whitespaces from dts files ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36246	2013-04-07 13:32:37 +00:00
Gabor Juhos	017aabe292	ramips: handle PCI interrupts in plat_irq_dispatch ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36245	2013-04-07 13:25:38 +00:00
John Crispin	811f7f9f2d	fix typos inside dts files ... Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de> SVN-Revision: 36244	2013-04-07 11:47:03 +00:00
John Crispin	709b19ed9f	fix default commandline in dts files ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36243	2013-04-07 11:46:54 +00:00
Gabor Juhos	85675528da	ramips: add cfi_cmdset_0002 patches ... The parallel flash access on the RT-N56U is broken without those patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36242	2013-04-07 11:37:15 +00:00
Felix Fietkau	fde143b66f	cns3xxx: remove the watchdog IRQ from the resources, it breaks the driver init and is useful only for testing ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36241	2013-04-07 11:24:30 +00:00
Gabor Juhos	10d8e4b66c	ramips: remove top-level {address,size}-cells properties from .dts files ... Those are defined in the SoC specific .dtsi files. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36237	2013-04-07 08:19:10 +00:00
Hauke Mehrtens	4a46687d25	brcm47xx: use old partition names again for kernel 3.8 ... This fixes sysupgrade. The partition names are used all over the Internet in various howtos. Thank you russell for spotting this problem. SVN-Revision: 36235	2013-04-06 22:22:26 +00:00
Hauke Mehrtens	204bde8d98	brcm47xx: fix error in board detection when nvram is not available. ... SVN-Revision: 36234	2013-04-06 19:02:25 +00:00
Gabor Juhos	d45ef216e6	linux/3.8: implement pcibios_get_phb_of_node for MIPS ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36233	2013-04-06 17:33:03 +00:00
Gabor Juhos	51fa28e2c2	linux/3.8: backport devm_ioremap_resource from 3.9 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36232	2013-04-06 17:33:00 +00:00
Gabor Juhos	756b810178	ramips: fix ethernet switch node in DIR-645.dts ... Fix a typo in the node name and add vendor prefix for the compatible string. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36231	2013-04-06 17:19:35 +00:00
Gabor Juhos	747b795b56	generic: rtl8367: add compatible string with vendor prefix ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36230	2013-04-06 17:19:31 +00:00
Gabor Juhos	f5d8d80ca9	generic: rtl8367b: fix rtl8367b_extif_init_of ... * disable external interface if its property is not present * show an error message if the extif property is not valid * use proper error values intead of -1 * fix memory leak * wrap long lines Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36229	2013-04-06 17:03:09 +00:00
Gabor Juhos	32d3b456f0	linux/3.8: add more missing symbols ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36228	2013-04-06 16:56:47 +00:00
Gabor Juhos	89539462a8	linux/3.8: add missing symbol ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36226	2013-04-06 16:38:36 +00:00
Gabor Juhos	1ef39b43dd	ramips: remove spi node from RTN56.dts ... The RT-N56U board uses a parallel flash. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36223	2013-04-06 12:37:40 +00:00
Gabor Juhos	d57e662cda	ramips: fix ethernet switch node in RTN56U.dts ... The RT-N56U uses an RTL8367M switch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36222	2013-04-06 12:37:38 +00:00
Gabor Juhos	4becd8590c	ramips: rt3883: enable the RTL8367 driver ... That is needed by the Asus RT-N56U board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36221	2013-04-06 12:37:37 +00:00
Gabor Juhos	38bd9b4337	generic: rtl8367: allow to load extif config from OF ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36220	2013-04-06 12:37:36 +00:00
Gabor Juhos	585d19d168	generic: rtl8367: fix a typo in MODULE_DEVICE_TABLE macro ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36219	2013-04-06 12:37:34 +00:00
Gabor Juhos	68c931c637	generic: rtl8367: add vendor prefix to the compatible string ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36218	2013-04-06 12:37:32 +00:00
Gabor Juhos	348640f4b3	ramips: rt3883: sync 3.8 config ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36217	2013-04-06 12:37:31 +00:00
John Crispin	d16de0b69f	fix typo pinmmux -> pinmux ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36216	2013-04-06 11:46:34 +00:00
Gabor Juhos	f78c902cfd	kernel: update linux 3.8 to 3.8.6 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36215	2013-04-06 11:40:44 +00:00
Gabor Juhos	202fb45deb	refresh kernel configs with kconfig.pl ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36214	2013-04-06 11:40:41 +00:00
John Crispin	df7af06f1f	fix dir-615 h1 network config ... http://patchwork.openwrt.org/patch/3527/ Signed-off-by: Daniel Petre <dani@ip6.ro> SVN-Revision: 36213	2013-04-05 23:37:45 +00:00
John Crispin	e1a74d8ff7	fix typo that made gpiomuxing fail ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36212	2013-04-05 23:10:42 +00:00
Florian Fainelli	495296bba9	malta: add le64 and be64 sub targets ... These two subtargets are used to build a 64-bit malta kernel along with 64-bit userland support. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36211	2013-04-05 12:36:48 +00:00
Florian Fainelli	12b925dcbf	malta: move 32-bits options to subtarget config ... Preliminary change to add support for MIPS64-based malta subtargets. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36210	2013-04-05 12:36:45 +00:00
Florian Fainelli	5eb8ba7f19	malta: move endianness kernel configuration to subtarget ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36209	2013-04-05 12:36:41 +00:00
Florian Fainelli	348cae15d2	buildroot: factor knowledge of a 64bits architecture ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36204	2013-04-05 12:36:19 +00:00
Florian Fainelli	46dfa04a08	malta: enable mips16 feature flag ... The malta platform supports mips16 advertise this feature flag. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36203	2013-04-05 12:36:16 +00:00
Florian Fainelli	9e1d2c15d9	buildroot: allow enabling MIPS16 user-space build ... Enabling MIPS16 is made conditional on advertising the "mips16" feature for a specific target since it requires support from the CPU (HAS_MIPS16) and the actual use of MIPS16 for building packages (USE_MIPS16). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36202	2013-04-05 12:36:12 +00:00
John Crispin	d9bb7ff7a5	Migrate lantiq platform to common led helper functions ... http://patchwork.openwrt.org/patch/3316/ Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 36187	2013-04-03 10:01:07 +00:00
John Crispin	a4c745ee74	add a missing patch that makes board detection work again ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36186	2013-04-03 10:01:03 +00:00
John Crispin	c838ec2391	Patch for invoking (pre)init ... http://patchwork.openwrt.org/patch/3485/ Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 36183	2013-04-03 10:00:50 +00:00
John Crispin	93899a1329	add profile for tenda w150m board ... http://patchwork.openwrt.org/patch/3371/ Signed-off-by: Chi Zhang <zhangchi866@gmail.com> SVN-Revision: 36176	2013-04-03 10:00:21 +00:00
John Crispin	7e54357bd5	fix ALL5002 default package selection ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36175	2013-04-03 10:00:16 +00:00
John Crispin	37401dca92	Build WW factory image for DAP-1350 ... http://patchwork.openwrt.org/patch/3466/ Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36174	2013-04-03 10:00:12 +00:00
John Crispin	910b705155	add Huawei D105 ... http://patchwork.openwrt.org/patch/3510/ Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 36173	2013-04-03 10:00:08 +00:00
John Crispin	c1710901c5	add profile for the Edimax 3g-6200NL board ... http://patchwork.openwrt.org/patch/3214/ Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net> SVN-Revision: 36172	2013-04-03 10:00:03 +00:00
John Crispin	f3643374c4	there is no ttyS1 console ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36171	2013-04-03 09:59:59 +00:00
John Crispin	99e0ff1123	make v3.8 the default ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36170	2013-04-03 09:59:55 +00:00
John Crispin	c8d5f5e0ef	add new image/Makefile ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36169	2013-04-03 09:59:51 +00:00
John Crispin	770b28f146	add the dts files that describe the boards in future ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36168	2013-04-03 09:59:46 +00:00
John Crispin	2328e8389e	fix upvel profile names ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36167	2013-04-03 09:59:41 +00:00
John Crispin	94972a5268	fix rt3883 config-3.8 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36166	2013-04-03 09:59:37 +00:00
John Crispin	0716ae8abe	fix rt305x config-3.8 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36165	2013-04-03 09:59:33 +00:00
John Crispin	dce4945972	mark rt288x broken until the test hardware arrives in the mail ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36164	2013-04-03 09:59:16 +00:00
John Crispin	46f141637c	add patches for v3.8 ... Signed-off-by: John Crsipin <blogic@openwrt.org> SVN-Revision: 36163	2013-04-03 09:59:10 +00:00
John Crispin	4f86ea43ca	remove old ralink 3.8 patches ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36162	2013-04-03 09:58:48 +00:00
John Crispin	d4db00205d	move files to files-3.7 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36161	2013-04-03 09:58:44 +00:00
John Crispin	86a691144b	add feature gpio ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36160	2013-04-03 09:58:37 +00:00
John Crispin	1105bd2897	add OF support to rtl8367b driver ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36159	2013-04-03 09:58:33 +00:00
John Crispin	cc34858d4a	make firmware loading work on v3.9 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36158	2013-04-03 09:58:28 +00:00
Felix Fietkau	72f5901eb1	mpc85xx: enable ath9k and wpad-mini by default ... SVN-Revision: 36142	2013-04-01 09:53:29 +00:00
Hauke Mehrtens	98ef9e5411	brcm47xx: generate images for Linksys E.... models ... Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 36139	2013-03-27 15:51:28 +00:00
Hauke Mehrtens	b4eabad019	gemini: remove usage of ehci_port_power() it was removed in kernel 3.8 ... SVN-Revision: 36138	2013-03-27 15:48:07 +00:00
Hauke Mehrtens	31c9452120	brcm47xx: activate image generation for some Netgear devices which are on the market and should be supported. ... SVN-Revision: 36137	2013-03-27 15:35:52 +00:00
Hauke Mehrtens	a9e5a178ef	brcm47xx: generate images for more WRT...N models ... Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 36136	2013-03-27 15:34:55 +00:00
Imre Kaloz	b92e750027	upgrade to 3.9-rc4, disable unsupported boards ... SVN-Revision: 36128	2013-03-25 14:18:32 +00:00
Imre Kaloz	c90078ce87	refresh patches against -rc4 ... SVN-Revision: 36127	2013-03-25 13:53:48 +00:00
Imre Kaloz	f26378fd7c	add missing symbols ... SVN-Revision: 36126	2013-03-25 13:53:17 +00:00
Gabor Juhos	f7da2127ab	ar71xx: fix ethernet LEDs on the TL-WDR3500 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36122	2013-03-25 06:40:03 +00:00
Gabor Juhos	39c132d154	ar71xx: add GPIO output select values for AR934x ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36121	2013-03-25 06:40:00 +00:00
Gabor Juhos	849201b1d8	ar71xx: add default LED configuration for the WL-WRD3500 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36120	2013-03-24 21:07:21 +00:00
Gabor Juhos	cd5cca4ba8	ar71xx: fix USB power GPIO on the TL-WDR3500 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36119	2013-03-24 19:23:47 +00:00
Gabor Juhos	4daefc9480	ar71xx: remove numeric suffix of the TL-WDR3500 USB LED ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36118	2013-03-24 19:23:45 +00:00
Gabor Juhos	a4a2a7189f	ar71xx: add diag support for the TL-WDR3500 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36117	2013-03-24 19:23:43 +00:00
Gabor Juhos	38c991311b	ar71xx: add default switch configuration for the TL-WDR3500 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36116	2013-03-24 19:23:36 +00:00
Hauke Mehrtens	bb81e695f9	kernel: add missing config options for au1000 target ... SVN-Revision: 36115	2013-03-24 14:01:38 +00:00
Hauke Mehrtens	18c47be19a	kernel: add missing CONFIG_BLK_DEV_IDE_AU1XXX config option. ... SVN-Revision: 36102	2013-03-21 14:56:04 +00:00
Hauke Mehrtens	4995f23669	kernel: REGMAP_SPI should only be selectable when SPI_MASTER is selected ... This was turned from a silent confg option without a text to a normal config option which could be selected without any other option depending on this. This could cause the situation where REGMAP_SPI was selected without SPI_MASTER being selected. SVN-Revision: 36101	2013-03-21 14:50:59 +00:00
Hauke Mehrtens	d5cf67297a	brcm47xx: generate images for some more devices ... These devices should be supported by trunk now. SVN-Revision: 36099	2013-03-20 22:01:18 +00:00
Hauke Mehrtens	c9544f4af0	kernel: add some fixes for kernel 3.9 ... This patch fixes some compile problems with kernel 3.9 and adds some missing linux 3.9 handling into kernel packages. SVN-Revision: 36098	2013-03-20 21:59:24 +00:00
Hauke Mehrtens	99638c5288	kernel: add some missing config options for kernel 3.9 ... SVN-Revision: 36097	2013-03-20 21:53:51 +00:00
Florian Fainelli	b1cc7a90a4	kernel: make SND_COMPRESS_OFFLOAD symbol visible for selection (#13193) ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36091	2013-03-19 14:13:39 +00:00
Florian Fainelli	fe157ea1ba	uml: remove 3.6 kernel patches ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36080	2013-03-17 19:47:04 +00:00
Florian Fainelli	1898218119	uml: remove 3.3. kernel patches ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36079	2013-03-17 19:46:59 +00:00
Florian Fainelli	c36db5f66a	uml: switch to 3.8 kernel ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36078	2013-03-17 19:46:54 +00:00
Florian Fainelli	a987d1aaa3	uml: add support for 3.8 kernel ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36077	2013-03-17 19:46:49 +00:00
Florian Fainelli	499f92c3db	uml: remove 3.2 patches ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36076	2013-03-17 19:46:43 +00:00
Florian Fainelli	ce33aaafcf	ep93xx: switch to 3.8 kernel ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36075	2013-03-17 19:46:37 +00:00
Florian Fainelli	a5551d366a	kernel: refresh 3.9 patches ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36074	2013-03-17 19:46:32 +00:00
Florian Fainelli	472bb8d51a	ep93xx: add support for 3.8 kernel ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36073	2013-03-17 19:46:25 +00:00
Florian Fainelli	743e9e7009	ep93xx: account for sound soc directory rename in 3.7 ... sound/soc/ep93xx -> sound/soc/cirrus Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36071	2013-03-17 19:45:55 +00:00
Florian Fainelli	6a7100c760	kernel: set regmap-core module license ... Fixes the following issues: [ 7.660000] regmap_core: module license 'unspecified' taints kernel [ 7.690000] Disabling lock debugging due to kernel [ 7.700000] regmap_core: Unknown symbol lzo1x_decompress_safe (err 0 [ 7.710000] regmap_core: Unknown symbol lzo1x_1_compress (err 0 [ 7.720000] regmap_core: Unknown symbol devres_add (err 0 [ 7.730000] regmap_core: Unknown symbol debugfs_create_bool (err 0 [ 7.750000] regmap_core: Unknown symbol devres_alloc (err 0 [ 7.760000] regmap_core: Unknown symbol debugfs_remove_recursive (err 0 [ 7.770000] regmap_core: Unknown symbol debugfs_create_file (err 0 [ 7.780000] regmap_core: Unknown symbol devres_free (err 0 [ 7.800000] regmap_core: Unknown symbol devres_find (err 0 [ 7.810000] regmap_core: Unknown symbol debugfs_create_dir (err 0) Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36070	2013-03-17 19:45:48 +00:00
Florian Fainelli	7987c8d0dc	au1000: remove support for 3.3. kernel ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36067	2013-03-17 14:33:47 +00:00
Florian Fainelli	c56c18168e	au1000: switch to 3.6 kernel ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36066	2013-03-17 14:33:41 +00:00
Florian Fainelli	5592a619d0	au1000: keep the MTX-1 watchdog pin low during boot ... Do this until the watchdog driver is loaded and the user-space watchdog daemon can start pinging the watchdog. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36065	2013-03-17 14:33:36 +00:00
Florian Fainelli	d5c2e83fa5	ep93xx: remove 3.3 kernel support ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36064	2013-03-17 14:33:23 +00:00
Florian Fainelli	9cef30a519	mcs814x: use devm_request_and_ioremap in mcs814x-rng driver ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36063	2013-03-17 14:33:18 +00:00
Florian Fainelli	8ed2299646	mcs814x: use devm_request_and_ioremap helper for nuport_mac driver ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36062	2013-03-17 14:33:13 +00:00
Florian Fainelli	8bc84bac31	mcs814x: remove PCI code ... None of the boards we support are using it nor have it wired out of the SoC, just remove it. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36061	2013-03-17 14:33:07 +00:00
Florian Fainelli	a9ef927cce	mcs814x: implement MULTI_IRQ_HANDLER ... Allows us to get rid of the IRQ entry point assembly Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36060	2013-03-16 22:25:47 +00:00
Florian Fainelli	18908139f3	mcs814x: use the standard device tree binding to represent a PHY node ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36059	2013-03-16 22:25:41 +00:00
Gabor Juhos	1996cfe9dd	mpc85xx: add profile and build image for the TL-WDR4900 v1 board ... Now that the ethernet switch is working, create firmware images to make impatient users happy. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36051	2013-03-15 16:11:45 +00:00
Gabor Juhos	72253b9073	generic: ar8216: start AR8327 switch from the probe routine ... The AR8327 switch gets its configuration from platform data or from the device-tree. This allows to start it from the probe routine. Doing so makes it usable with ethernet drivers which only connects to the PHY device when the ethernet interface is opened. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36050	2013-03-15 16:06:28 +00:00
Gabor Juhos	5503686f69	generic: ar8216: add ar8xxx_start helper ... Move switch starting code into a separate function. This makes it usable from other places. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36049	2013-03-15 16:06:25 +00:00
Gabor Juhos	44ce8dac88	mpc85xx: add AR8327 initvals to the TL-WDR4900 devicetree ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36048	2013-03-15 15:53:06 +00:00
Gabor Juhos	7ba6a8d8e8	generic: ar8216: add OF configuration support for AR8327 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36047	2013-03-15 15:50:08 +00:00
Gabor Juhos	ee12b1b7d5	generic: ar8216: separate platform_data based AR8327 code ... Move platform_data specific configuration code into a separate routine. Do it in preparation for the upcoming OF support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36046	2013-03-15 15:50:05 +00:00
Gabor Juhos	d88f66ae21	generic: ar8216: don't use platform_data in ar8327_init_port ... Fetch the PORT_STATUS values in ar8327_hw_init and store those in a private data stucture for later use. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36045	2013-03-15 15:50:02 +00:00
Gabor Juhos	9d3f70d503	generic: ar8216: move the ar8327_get_port_init_status function ... It will be used in ar8327_probe routine. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36044	2013-03-15 15:50:00 +00:00
Gabor Juhos	17d735fc46	generic: ar8216: simplify and rename ar8327_config_port ... Return with the PORT_STATUS register value instead of writing that directly into the corresponding register. Also rename the function to ar8327_get_port_init_status. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36043	2013-03-15 15:49:57 +00:00
Gabor Juhos	3fee1bddbe	generic: ar8216: remove superfluous pdata checks ... The presence of the platform data is already verified in ar8327_hw_init, and the driver does not start without that anyway. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36042	2013-03-15 15:49:55 +00:00
Gabor Juhos	07532dca7f	kernel: update linux 3.8 to 3.8.3 ... Also refresh the related generic/platform patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36039	2013-03-15 14:39:51 +00:00
Gabor Juhos	d614f8a880	ar71xx: build images for the TL-MR11U v2 ... [juhosg: use different profile name for v1 and v2, and add multi profile to build for both versions] Signed-off-by: Guilhem Lettron <guilhem@lettron.fr> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36038	2013-03-15 14:35:52 +00:00
Gabor Juhos	35d41db979	ar71xx: rw2458n - Use eeprom (art) from wifi card ... Use eeprom (art) from included wifi card, not hard coded in flash. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36037	2013-03-15 14:35:50 +00:00
Gabor Juhos	8deffcba7e	ar71xx: Error fix in Kernel for MR3420v2 Ethernet Switch configuration ... Error in using another MDIO (AP123 platform using only one GE1 device for eth0 and eth1) for the router mr3420v2. ?onfirmed: https://forum.openwrt.org/viewtopic.php?pid=194779#p194779 Routers in this sense are the same and the only difference is: USB port, USB led, instead of the GPIO-switch we have GPIO-button. Signed-off-by: Dmytro <dioptimizer@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36036	2013-03-15 14:35:48 +00:00
John Crispin	4d5860cdd6	ACMP252: fix USB-enable GPIO and use default PCI configuration for now ... EEPROM is an actial serial EEPROM on the WiFi module, therefore we can remove ralink_eep from the dts. USB power-enable GPIO turned out to be GPIO #3 (found via probing/brute-force). PCI works with default settings as long as the vendor bootloader is used. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 36030	2013-03-14 18:43:54 +00:00
John Crispin	0dbe4f502d	fix buttons on vr9 eval kit ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36029	2013-03-14 18:43:49 +00:00
John Crispin	9b4a8c6d1e	select vdsl packages on vr9 boards ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36028	2013-03-14 18:43:44 +00:00
John Crispin	0f7f1f3347	fix fritzbox 3370 partitions/memory/cmdline ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36027	2013-03-14 18:43:39 +00:00
John Crispin	5452dbad61	build jffs images for nand based fritzbox ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36026	2013-03-14 18:43:34 +00:00
John Crispin	b98ae2b149	bump to v3.8 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36014	2013-03-14 18:42:29 +00:00
John Crispin	3ab75692f3	move GPHY FW blobs to non versioned folder ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36013	2013-03-14 18:42:21 +00:00
Florian Fainelli	b2e63b8ea8	kernel: add support for 3.9-rc2 ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36008	2013-03-14 14:45:56 +00:00
John Crispin	1360067c4a	update the /init file to start /sbin/init ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36002	2013-03-13 18:11:13 +00:00
John Crispin	043d56b646	make sure the console works when using procd as our pid 1 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36000	2013-03-13 18:11:00 +00:00
Gabor Juhos	f0f72ce262	gemini: remove 3.3 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35995	2013-03-12 18:22:34 +00:00
Gabor Juhos	04f2ef9e66	gemini: switch to 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35994	2013-03-12 18:22:33 +00:00
Gabor Juhos	54b9b4d8a5	gemini: add support for 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35993	2013-03-12 18:22:22 +00:00
John Crispin	48a4b3a0cd	fixes NO_XIP on CFI0001 flash ... This patch disables the execute-in-place (XIP) support for flash on lantiq. This has to be disabled since the bus which flash is connected to does not support unaligned accesses. Resolves data bus errors on Lantiq routers with Intel command set flash. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 35992	2013-03-12 13:53:08 +00:00
John Crispin	e3a6ea65e1	add support for AudioCodes AC-252 ... user-space support for extracting the EEPROM for the RaLink WiFi is still missing. Besides this, it's all working. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 35990	2013-03-12 13:52:54 +00:00
John Crispin	0b881eea72	unbreak dgn3500 spi-gpio ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 35989	2013-03-12 13:52:47 +00:00
John Crispin	b22cbac68f	make sure errors get sent to /dev/null ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 35988	2013-03-12 13:52:40 +00:00
John Crispin	fad5f5700e	make sure errors get sent to /dev/null ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 35987	2013-03-12 13:52:33 +00:00
Gabor Juhos	76934b6779	avr32: remove 3.3 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35985	2013-03-12 13:28:33 +00:00
Gabor Juhos	a71b9f5d04	avr32: switch to 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35984	2013-03-12 13:28:32 +00:00
Gabor Juhos	19b2c06b09	avr32: add support for 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35983	2013-03-12 13:28:31 +00:00
Gabor Juhos	f04cccb842	avr32: add sysupgrade support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35982	2013-03-12 13:28:27 +00:00
Gabor Juhos	6c3dd84897	avr32: add firmware partition ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35981	2013-03-12 13:28:23 +00:00
Gabor Juhos	cb9fad715c	avr32: add diag support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35980	2013-03-12 13:28:21 +00:00
Gabor Juhos	de0d19ac3d	avr32: create network config dynamically ... The default network configuration from base-files is not correct for the NGW100 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35979	2013-03-12 13:28:19 +00:00
Gabor Juhos	73caeba522	avr32: built the firmware images from the lzma compressed uImage ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35978	2013-03-12 13:28:16 +00:00
Gabor Juhos	12a213227e	mpc52xx: remove 3.3 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35977	2013-03-12 07:18:37 +00:00
Gabor Juhos	1ed39da53d	mpc52xx: switch to 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35976	2013-03-12 07:18:36 +00:00
Gabor Juhos	ae0af74654	mpc52xx: add support for 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35975	2013-03-12 07:18:34 +00:00
Gabor Juhos	fe3df4b593	ramips: add profile and build image for the Upvel UR-326N4G board ... Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35972	2013-03-11 21:02:45 +00:00
Gabor Juhos	d543f4b771	ramips: add user-space support for the Upvel UR-326N4G board ... [juhosg: fix mac address setup] Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35971	2013-03-11 21:02:43 +00:00
Gabor Juhos	3c2ef04a0e	ramips: add kernel support for the Upvel UR-326N4G board ... [juhosg: add missing symbols to config-3.{7,8}] Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35970	2013-03-11 21:02:40 +00:00
Gabor Juhos	14ca5fc98b	ar71xx: om2p-hs: use correct bit mask to disable JTAG functionality ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35966	2013-03-11 19:52:54 +00:00
Gabor Juhos	72fc0c1906	ar71xx: add AR934X_GPIO_FUNC_* defines ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35965	2013-03-11 19:52:51 +00:00
Gabor Juhos	44cc1507e9	ar71xx: makefile changes to build image for MR3420v2 ... Patch-by: Dmytro <dioptimizer@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3440/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35964	2013-03-11 15:55:25 +00:00
Gabor Juhos	2998abab7c	ar71xx: add user-space support for MR3420v2 ... Patch-by: Dmytro <dioptimizer@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3442/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35962	2013-03-11 15:55:22 +00:00
Gabor Juhos	902dd27383	ar71xx: add kernel support for MR3420v2 ... [juhosg: use gpio_request_one to enable the USB power] Patch-by: Dmytro <dioptimizer@gmail.com> Signed-off-by: Gabor Juhos <juhosg@opewrt.org> SVN-Revision: 35961	2013-03-11 15:55:20 +00:00
Gabor Juhos	5c5e1c0a9d	ar71xx: enabling control GPIO14 and GPIO15 on MR3040/MR11U ... LAN1 and LAN2 LEDs not present (it pulled to ground via resistors) on MR3040 and MR11U devices. This little patch enabling ability to control GPIO14 and GPIO15. Patch-by: Dmytro <dioptimizer@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3439/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35960	2013-03-11 15:55:19 +00:00
Gabor Juhos	257bfc21af	ar71xx: add profile support for dir-835-a1 ... Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Patchwork: http://patchwork.openwrt.org/patch/3427/mbox/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35959	2013-03-11 15:55:17 +00:00
Gabor Juhos	3fa3cbae7c	ar71xx: add user space support for dir-835-a1 ... Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Patchwork: http://patchwork.openwrt.org/patch/3425/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35958	2013-03-11 15:55:15 +00:00
Gabor Juhos	a7525f5f5d	ar71xx: add kernel support for dir-835-a1 ... [juhosg: - remove custom mdio bus info and platform data for ar8327, clear the .led_cfg field from dir835a1_setup instead, - remove arguments of dir835c1_generic_setup function, register the LEDs directly from the board specific setup instead] Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Patchwork: http://patchwork.openwrt.org/patch/3426/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35957	2013-03-11 15:55:13 +00:00
Felix Fietkau	bd6c9d6252	cns3xxx: ethernet - clean the tx ring before refilling the rx ring to reduce memory pressure ... SVN-Revision: 35953	2013-03-11 02:29:53 +00:00
Felix Fietkau	d7a529709a	cns3xxx: ethernet - clean the tx ring only in the poll function, not in the xmit handler ... SVN-Revision: 35952	2013-03-11 02:29:47 +00:00
Felix Fietkau	0d13baff1e	cns3xxx: increase number of ethernet driver rx buffers ... SVN-Revision: 35951	2013-03-10 21:59:32 +00:00
Felix Fietkau	ee2b511e1f	cns3xxx: prevent the ethernet driver from accessing uninitialized dma descriptor entries ... SVN-Revision: 35950	2013-03-10 21:59:28 +00:00
Felix Fietkau	d22ac8d8fb	cns3xxx: minor ethernet driver cleanup ... SVN-Revision: 35949	2013-03-10 21:59:21 +00:00
Hauke Mehrtens	e1f24d99e1	brcm47xx: refresh config ... SVN-Revision: 35948	2013-03-10 20:42:26 +00:00
Hauke Mehrtens	89d4fceee2	xburst: fix compilation: remove the __dev attributes ... SVN-Revision: 35946	2013-03-10 20:26:28 +00:00
Hauke Mehrtens	45b24fa771	kernel: add some missing config options found by the buildbot. ... SVN-Revision: 35945	2013-03-10 20:25:19 +00:00
Felix Fietkau	9facda9570	cns3xxx: use kmalloc instead of kzalloc for ethernet rx buffers ... SVN-Revision: 35943	2013-03-10 18:25:20 +00:00
Felix Fietkau	c44506fcbd	cns3xxx: fix an rx irq handling corner case ... When an rx interrupt comes in, rx interrupts are disabled and NAPI polling is scheduled. During the NAPI poll, the driver first processes received frames in the ring, then fills the dma descriptor slots with new buffers and calls tx complete, before finally re-enabling rx interrupts and completing NAPI (if below the budget). If the hardware rx queue overflows before the napi complete is called, the hardware will not throw any further rx interrupts and rx processing stops completely. Fix this by keeping NAPI polling scheduled until it completes a poll without receiving any packets, and also handle NAPI completion before refilling rx or completing tx. SVN-Revision: 35942	2013-03-10 18:25:16 +00:00
Felix Fietkau	c1adc79328	cns3xxx: fix ethernet driver memory barrier usage ... SVN-Revision: 35941	2013-03-10 18:25:11 +00:00
Gabor Juhos	9a71711d39	realview: remove 3.3 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35940	2013-03-10 18:06:31 +00:00
Gabor Juhos	35dd42f976	realview: switch to 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35939	2013-03-10 18:06:29 +00:00
Felix Fietkau	53e0f10246	kernel: prevent -f*-sections from leaking into the boot zImage wrapper on arm ... SVN-Revision: 35938	2013-03-10 17:04:36 +00:00
Felix Fietkau	2b83c9bd8a	kernel: ensure that the arm exception handlers get preserved ... SVN-Revision: 35937	2013-03-10 17:04:31 +00:00
Felix Fietkau	f0d7ba33ef	kernel: use -ffunction-sections, -fdata-sections and --gc-sections on ARM to reduce kernel image size, disable those flags when tracing on MIPS to fix compile errors ... SVN-Revision: 35936	2013-03-10 14:51:42 +00:00
Gabor Juhos	5b3ab0e21e	xburst: remove 3.3 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35934	2013-03-10 13:24:54 +00:00
Gabor Juhos	00caedf86e	xburst: switch to 3.8 ... Compile tested only, so add broken flag. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35933	2013-03-10 13:24:52 +00:00
Gabor Juhos	8942d4dc04	xburst: add support for 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35932	2013-03-10 13:24:50 +00:00
Gabor Juhos	15718f5387	linux/3.8: add missing config symbols ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35931	2013-03-10 13:24:47 +00:00
Gabor Juhos	f25c050aa9	adm5120: remove 3.7 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35930	2013-03-10 13:24:46 +00:00
Gabor Juhos	5502bbe2ca	adm5120: switch to 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35929	2013-03-10 13:24:45 +00:00
Gabor Juhos	c42da71d8b	malta: remove 3.7 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35928	2013-03-10 13:24:44 +00:00
Gabor Juhos	6720fc6952	malta: switch to 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35927	2013-03-10 13:24:43 +00:00
Gabor Juhos	82dc64b19b	atheros: remove 3.3 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35926	2013-03-10 13:24:42 +00:00
Gabor Juhos	5b8e106ae6	atheros: switch to 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35925	2013-03-10 13:24:40 +00:00
Gabor Juhos	ce5806378e	mpc83xx: remove 3.7 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35924	2013-03-10 13:24:39 +00:00
Gabor Juhos	c79c132229	mpc83xx: switch to 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35923	2013-03-10 13:24:38 +00:00
Gabor Juhos	27ba973c06	rb532: remove 3.7 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35922	2013-03-10 13:21:40 +00:00
Gabor Juhos	501e4d331d	rb532: switch to 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35921	2013-03-10 13:21:33 +00:00
Gabor Juhos	8223205a29	rb532: add support for 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35920	2013-03-10 13:21:29 +00:00
Gabor Juhos	e8a5312bef	ar71xx: correct board name to make LEDs work on RB750 ... Patch by: Denver A <denvera@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3419/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35919	2013-03-10 07:20:57 +00:00
Gabor Juhos	d85ffaabe9	ppc40x: remove __dev_{in,ex}it annotations ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35918	2013-03-10 07:20:54 +00:00
Felix Fietkau	446409f43e	cns3xxx: reduce buffer allocation size to 2048 bytes, improves ethernet performance ... SVN-Revision: 35917	2013-03-10 01:27:04 +00:00
Felix Fietkau	95431b7843	cns3xxx: remove linux 3.3 support ... SVN-Revision: 35916	2013-03-10 01:01:55 +00:00
Felix Fietkau	3d919b7c08	cns3xxx: disable CONFIG_PROC_STRIPPED and add an init script to set the ethernet cpu affinity (improves lan<->wlan bridging performance) ... SVN-Revision: 35915	2013-03-10 01:01:51 +00:00
Hauke Mehrtens	44ed7d664a	brcm47xx: add some more partition parser fixes by Rafał Miłecki ... SVN-Revision: 35912	2013-03-09 19:48:03 +00:00
Hauke Mehrtens	694050a4cf	brcm47xx: netconfig: add bacis support for swconfig ... Parse the cpu port from swconfig and explicitly mark the cpu port as tagged. SVN-Revision: 35911	2013-03-09 19:24:43 +00:00
Felix Fietkau	72af5b4b35	kernel: add a missing config symbol for 3.8 ... SVN-Revision: 35910	2013-03-09 19:04:37 +00:00
Felix Fietkau	95f14d052a	cns3xxx: add linux 3.8 support and use it by default ... SVN-Revision: 35908	2013-03-09 18:51:46 +00:00
Felix Fietkau	85348d602e	kernel: fix mpcore watchdog symbol export ... SVN-Revision: 35907	2013-03-09 18:51:39 +00:00
Gabor Juhos	938361b055	cns21xx: remove 3.7 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35886	2013-03-04 16:08:41 +00:00
Gabor Juhos	a61431b154	cns21xx: switch to 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35885	2013-03-04 16:08:39 +00:00
Gabor Juhos	3e3fc552bc	ppc44x: remove 3.7 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35884	2013-03-04 15:16:37 +00:00
Gabor Juhos	d24041665c	ppc44x: switch to 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35883	2013-03-04 15:16:35 +00:00
Gabor Juhos	c67127ad23	ppc40x: remove 3.7 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35882	2013-03-04 15:16:33 +00:00
Gabor Juhos	341b5ba939	ppc40x: switch to 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35881	2013-03-04 15:16:32 +00:00
Florian Fainelli	b412a81524	brcm63xx: fix LED names for various boards ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35880	2013-03-04 13:42:35 +00:00
Gabor Juhos	947bc9d36f	ar71xx: add backported watchdog patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35879	2013-03-04 12:08:28 +00:00
Gabor Juhos	1d55249d7c	ar71xx: use backported QCA955x patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35878	2013-03-04 11:48:15 +00:00
Gabor Juhos	64a9fe2894	ar71xx: use backported PCI patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35877	2013-03-04 11:48:08 +00:00
Gabor Juhos	12d49b5195	ar71xx: use backported MISC IRQ patch ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35876	2013-03-04 11:48:06 +00:00
Gabor Juhos	4c31b9f43e	ar71xx: use backported GPIO patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35875	2013-03-04 11:48:04 +00:00
Luka Perkov	120028af99	ar71xx: enable building ramdisk images for WZRHPG30XNH board types ... Signed-off-by: Luka Perkov <luka@openwrt.org> Acked-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35874	2013-03-04 11:37:28 +00:00
Gabor Juhos	0ad50b0bec	ar71xx: use backported SPI patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35873	2013-03-04 09:40:44 +00:00
Gabor Juhos	c28cdfab31	mpc85xx: remove 3.7 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35872	2013-03-04 09:37:25 +00:00
Gabor Juhos	84e960f7aa	mpc85xx: switch to 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35871	2013-03-04 09:37:24 +00:00
Gabor Juhos	3ee484d54c	ar71xx: remove 3.7 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35870	2013-03-04 09:03:50 +00:00
Gabor Juhos	d5adb0dbdd	ar71xx: switch to 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35869	2013-03-04 08:47:38 +00:00
Gabor Juhos	a87a96da67	kernel: update linux 3.8 to 3.8.2 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35868	2013-03-04 08:43:55 +00:00
Luka Perkov	a5ebfc79ba	ar71xx: rework changes from r35840 ... Signed-off-by: Luka Perkov <luka@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35865	2013-03-03 21:59:34 +00:00
Gabor Juhos	26fbc15a86	kernel: update linux 3.8 to 3.8.1 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35862	2013-03-03 13:58:52 +00:00
Gabor Juhos	da79a4c698	linux/3.8: add missing config symbols ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35861	2013-03-03 13:58:10 +00:00
Gabor Juhos	23b3b3a194	kernel: update linux 3.7 to 3.7.10 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35860	2013-03-03 13:57:40 +00:00
Gabor Juhos	4491da2bd4	ar71xx: update MAC address assignment for dir-825-c1 ... Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35855	2013-03-03 12:47:37 +00:00
Gabor Juhos	200aa6db83	ar71xx: fixes leds for dir-825-c1 ... Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35854	2013-03-03 12:47:33 +00:00
Gabor Juhos	8798c73860	ramips: set -march=24kec for rt305x and rt3883 to enable use of DSP extension ... All known rt305x and rt3883 implementations support at least the 24kec instruction set which includes the DSP extension. For rt288x, the previous value mips32r2 is kept. The cpu target is now set per sub-archtecture, according to cpu-feature-overrides.h of each SoC family. [juhosg: define ARCH_PACKAGES variable for rt305x/rt3883 in order to differentiate the packages compiled with the 24Kec option.] Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35853	2013-03-03 12:47:31 +00:00
Gabor Juhos	59ad675ef1	ramips: add user-space detection for ALL5002/ALL5003 ... Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35852	2013-03-03 12:47:28 +00:00
Gabor Juhos	50e51e5ecc	ramips: indicate support for ALL5003 ... add ALL5003 to board description in mach-all5002.c adapt detection in user-space accordingly (no functional changes) Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35851	2013-03-03 12:47:25 +00:00
Gabor Juhos	367ab0a40f	ramips: enhance user-space board detection ... Similar to ar71xx, detect only once and cache the strings in /tmp/sysinfo/model and /tmp/sysinfo/boardname. Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35850	2013-03-03 12:47:02 +00:00
Gabor Juhos	1ba2272ca5	ramips: fix whitespace in /lib/ramips.sh ... Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35849	2013-03-03 12:46:08 +00:00
Felix Fietkau	a9c584c277	Revert "[cns3xxx]: clean up PCI bus topology" (r35079) ... It breaks PCIe IRQ mapping and possibly other things SVN-Revision: 35842	2013-03-02 00:32:54 +00:00
Luka Perkov	107e0c6d1f	ar71xx: add support for Buffalo WZR 600DHP ... Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 35840	2013-03-01 13:46:01 +00:00
Hauke Mehrtens	04af8bd108	brcm47xx: bgmac: omit the fcs ... This fixes #13058 and hopefully #12927 SVN-Revision: 35834	2013-02-28 13:27:21 +00:00
Hauke Mehrtens	9805096f48	brcm47xx: bgmac: update to version form netdev git repository ... SVN-Revision: 35833	2013-02-28 13:24:39 +00:00
Gabor Juhos	5412b6f32e	ramips: add support for 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35801	2013-02-25 21:28:42 +00:00
Gabor Juhos	a08646642e	ramips: image: don't break make process if mkimage command fails ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35800	2013-02-25 21:28:40 +00:00
Gabor Juhos	275db5b4c4	ramips: remove port_power_off field from ehci_platform_data ... It is removed in 3.8. Also add a revert patch for 3.7. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35799	2013-02-25 21:28:38 +00:00
Gabor Juhos	5e1d6ce077	ramips: remove __dev_{init,exit} annotations ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35798	2013-02-25 21:28:34 +00:00
Hauke Mehrtens	2c34e1aba5	brcm47xx: use bcm47xx_board_get() and detect some more boards in flash partition driver ... SVN-Revision: 35791	2013-02-25 20:56:37 +00:00
Hauke Mehrtens	5d3b728372	brcm47xx: board detection WNDR3400v2 ... WNDR3400v2 is based on BCM53xx . Image that is created breaks the router somehow therefore "#". CFE and NVRAM contain different vars - example: CFE line original: Device eth0: hwaddr 74-44-01-37-C6-69, ipaddr 192.168.1.1, mask 255.255.255.0 CFE after openwrt: Device eth0: hwaddr 00-FF-FF-FF-FF-FF, ipaddr 192.168.1.1, mask 255.255.255.0 Logs were posted earlier on this mailing list: https://lists.openwrt.org/pipermail/openwrt-devel/2012-July/016174.html Different logs with factory firmware are in the wiki: http://wiki.openwrt.org/toh/netgear/wndr3400#wndr3400v2 (and on wikidevi for example) Signed off by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 35790	2013-02-25 20:55:46 +00:00
Gabor Juhos	f7879cd8d8	ar71xx: add profile and build image fot the TL-WA830RE v1 board ... Added support for the TP-LINK TL-WA830RE v1 Range Extender. Based on the WA901ND v1 support. Hardware IDs checked against original firmware. Patch was successfully tested on hardware. Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35789	2013-02-25 20:37:35 +00:00
Gabor Juhos	ea71239d8a	ar71xx: add model detection for the TL-WA830RE board ... Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35788	2013-02-25 20:37:33 +00:00
Hauke Mehrtens	0f2fc0adfd	brcm47xx: use same board detection code as kernel 3.8 ... SVN-Revision: 35770	2013-02-24 18:10:42 +00:00
Gabor Juhos	05de472518	adm5120: add support for 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35769	2013-02-24 18:08:14 +00:00
Gabor Juhos	3d65d0291c	adm5120: remove __dev{init,exit} annotations ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35768	2013-02-24 18:08:03 +00:00
Gabor Juhos	0ab5ab2c08	adm5120: remove a superfluous patch ... The NO_IRQ symbol is not used by the amba core since upstream commit: dfb85185bda373a70409c70c2632b02fb0f8f449 AMBA: get rid of last two uses of NO_IRQ This gets rid of the last two users of NO_IRQ in AMBA primecell drivers. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35748	2013-02-22 16:01:19 +00:00
Gabor Juhos	6419ffd20d	adm5120: avoid warning caused by wrong AMBA irq values ... The amba core throws a warning if -1 is used as an irq value since upstream commit: 2eac58d5026e4ec8b17ff8b62877fea9e1d2f1b3 ARM: amba: make use of -1 IRQs warn Make the core warn about the use of -1 (NO_IRQ) Cange the value of the unused IRQs to zero for the UART devices to get rid of the warning. Based on #12729. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35747	2013-02-22 16:01:17 +00:00
Gabor Juhos	42cdd3bef4	cns21xx: add support for 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35737	2013-02-21 20:45:24 +00:00
Gabor Juhos	9ec9adf3ea	mpc83xx: add support for 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35736	2013-02-21 20:39:22 +00:00
Gabor Juhos	c50881d7ba	ppc44x: add support for 3.8 ... Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35735	2013-02-21 19:23:31 +00:00
Gabor Juhos	fd645abca4	ppc40x: add support for 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35734	2013-02-21 19:23:29 +00:00
Gabor Juhos	4da13625d5	mpc85xx: add user-space support for the TL-WDR4900 v1 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35733	2013-02-21 19:20:34 +00:00
Gabor Juhos	bd2c77b264	mpc85xx: update 3.8 config ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35732	2013-02-21 18:44:40 +00:00
Gabor Juhos	bcac3c5569	ar71xx: fix MAC address assignment on the DIR-825-Bx boards ... Use the same MAC addresses as the original firmware. Based on a patch from #10421. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Tested-by: Gabor Varga <vargagab@gmail.com> SVN-Revision: 35730	2013-02-21 17:58:21 +00:00
Gabor Juhos	d785803bfa	mpc85xx: add support for 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35729	2013-02-21 17:48:31 +00:00
Gabor Juhos	cf2324fd6b	ar71xx: add support for 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35728	2013-02-21 17:47:15 +00:00
Gabor Juhos	9cc3a60b5a	atheros: add support for linux kernel v3.8 ... This builds and boots. Because of the function pointer indirection (e.g. mtd_info's read function pointer is assigned to spiflash_read), it is difficult for me to understand where the calls are coming from (could be anywhere, conditionally pointing at spiflash versions), so I punted and used the renamed function pointers (_erase, _read, _write). If someone knows better what to do, please fix. Cleaned up other sundry kernel tracking issues like get_phy_id and __devinit,etc. [juhosg: don't switch to that yet] Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35727	2013-02-21 17:45:54 +00:00
Gabor Juhos	babd5aa2fc	linux/3.8: add missing config symbols ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35726	2013-02-21 16:52:34 +00:00
Jonas Gorski	ff20c0e1fc	bcm63xx: Fix sysupgrade for tag-version 7 and 8 ... Fix sysupgrade for tag-version 7 and 8. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 35724	2013-02-21 11:45:41 +00:00
Jonas Gorski	3010a0b616	generic: b53: clear SM_SW_FWD_MODE unconditionally when enabling VLAN ... Setting this bit stops BCM53125 (bgmac actually) from receiving any packets. This bit is cleared conditionally in b53_switch_reset and it seems the same is done in bcmrobo.c which never sets that bit again. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 35723	2013-02-21 11:45:38 +00:00
Jonas Gorski	23e71c56ba	generic: b53: remove empty spaces ... Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 35722	2013-02-21 11:45:36 +00:00
Jonas Gorski	1cd62d06ca	ramips: print image build warnings/errors to stderr ... Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35721	2013-02-21 11:45:33 +00:00
Jonas Gorski	a0956a88d4	cns21xx: print image build warnings/errors to stderr ... Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35720	2013-02-21 11:45:31 +00:00
Jonas Gorski	b91eab631b	ar71xx: print image build warnings/errors to stderr ... Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35719	2013-02-21 11:45:29 +00:00
Gabor Juhos	fad3fc1ad0	mpc85xx: add kmod-leds-gpio to the default packages ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35708	2013-02-21 10:26:03 +00:00
Gabor Juhos	c837cae29c	mpc85xx: disable a bunch of unused device nodes on the TL-WDR4900 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35707	2013-02-21 10:26:00 +00:00
Hauke Mehrtens	9afdb046d3	brcm47xx: do not use vlan0 any more. ... The Broadcom switch driver says that vlan0 should not be used with any switch other than bcm5325. This makes OpenWrt always use vlan1 and vlan2 instead. SVN-Revision: 35704	2013-02-20 15:31:43 +00:00
Gabor Juhos	4305c6cda1	mpc85xx: add kernel support for the TL-WDR4900 v1 board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35690	2013-02-20 08:27:27 +00:00
Gabor Juhos	33ba984628	mpc85xx: use a foreach loop to copy boot images ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35689	2013-02-20 08:27:26 +00:00
Gabor Juhos	4341b11f3e	ar71xx: remove __dev{init,exit} annotations from kernel files ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35687	2013-02-19 20:52:06 +00:00
Gabor Juhos	7d0d29ab6e	linux/3.8: add missing Kconfig symbols ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35686	2013-02-19 20:52:03 +00:00
Gabor Juhos	76b797c759	mpc85xx: add default profile ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35677	2013-02-19 14:53:17 +00:00
Gabor Juhos	debb9a4a97	mpc85xx: add gpio-keys to OF match table ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35676	2013-02-19 14:53:16 +00:00
Gabor Juhos	69cc70a43c	mpc85xx: enable squashfs feature ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35675	2013-02-19 14:53:15 +00:00
Gabor Juhos	ae9100e969	mpc85xx: add swconfig to default packages ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35674	2013-02-19 14:53:12 +00:00
Gabor Juhos	ed0f43f1e2	kernel: update linux 3.8-rcX to 3.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35672	2013-02-19 09:17:38 +00:00
Florian Fainelli	1dd9e661be	x86/rdc: migrate to common led helper functions ... Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35664	2013-02-18 10:38:05 +00:00
Florian Fainelli	677714309b	rb532: migrate platform to common led helper functions ... Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35663	2013-02-18 10:38:02 +00:00
Florian Fainelli	2bfa1ed82c	cobalt: migrate platform to common led helper functions ... Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35662	2013-02-18 10:37:58 +00:00
Florian Fainelli	d7092aceb8	brcm63xx: migrate platform to common led helper functions ... Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35661	2013-02-18 10:37:55 +00:00
Florian Fainelli	5953e79888	au1000: migrate to common led helper functions ... Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35660	2013-02-18 10:37:52 +00:00
Florian Fainelli	15b66e0cbe	ar7: migrate to common led helper functions ... Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35659	2013-02-18 10:37:43 +00:00
Gabor Juhos	90011a99f3	ramips: migrate to common led helper functions ... [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35652	2013-02-18 09:56:29 +00:00
Gabor Juhos	32b41c4dd0	cns21xx: migrate to common led helper functions ... [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35651	2013-02-18 09:56:28 +00:00
Gabor Juhos	f6691c09c1	ar71xx: migrate to common led helper functions ... [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35650	2013-02-18 09:56:27 +00:00
Gabor Juhos	546b336d2d	adm5120: migrate to common led helper functions ... [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35649	2013-02-18 09:56:26 +00:00
Gabor Juhos	3f749d1e8e	kernel: update linux 3.7 to 3.7.9 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35644	2013-02-17 21:32:42 +00:00
Gabor Juhos	451dd745bd	generic: ar8216: cleanup function/variable names ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35642	2013-02-17 12:48:25 +00:00
Gabor Juhos	51996304c4	generic: ar8216: rename struct ar8216_priv to ar8xxx_priv ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35641	2013-02-17 12:48:23 +00:00
Gabor Juhos	4215b1c93c	ar71xx: add user-space support for the Mikrotik RB951G board ... [juhosg: change rb-951g to rb-951g-2hnd in the scripts] Patchwork: http://patchwork.openwrt.org/patch/3257/ Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35634	2013-02-17 10:08:41 +00:00
Gabor Juhos	7a709573d7	ar71xx: add kernel support for the Mikrotik RB951G board ... This is platform definition for the RB951G device. It's mostly rework of RB2011UAS patchset with network taken from the RB751 patches. The main difference is the flash layout used by this device. [juhosg: - remove dead code from mach-rb951g - add "-2HnD" suffix to the machine name - use a separate 615-MIPS-ath79-RB951G-support.patch] Patchwork: http://patchwork.openwrt.org/patch/3257/ Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35633	2013-02-17 10:08:35 +00:00
Hauke Mehrtens	1a8218d6e4	brcm47xx: add initial support for kernel 3.8 ... This contains the following new bigger changes: * new partition parser which still could lake some features or have bugs * new nand flash driver * using physmap-flash flash driver for parallel flash * some changes to the serial flash driver With these changes OpenWrt starts using more of the mainline flash drivers. SVN-Revision: 35632	2013-02-16 20:28:24 +00:00
Gabor Juhos	17c36f540c	ar71xx: fix kmod-usb2 package name ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35629	2013-02-16 17:33:06 +00:00
Gabor Juhos	4375dae6d3	ramips: fix kmod-usb2 package name ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35628	2013-02-16 17:26:52 +00:00
Gabor Juhos	62e80eba31	mpc85xx: add input drivers to default packages, and load those during preinit ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35626	2013-02-16 17:13:38 +00:00
Hauke Mehrtens	ce6a7543fe	brcm47xx: BGMAC - Adjust AutoLoad number to be prior to switch modules ... Adjust the "AutoLoad" number for the BGMAC module to be prior to the switch modules. This probably isn't real important as the modules are loaded in the correct order by preinit anyway. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 35625	2013-02-16 16:27:33 +00:00
Hauke Mehrtens	9de704a03b	brcm47xx: improve cpuport detection for filesafe ... Do not try to load bcm57xx.ko any more this is not needed for kernel 2.6 and 3.X Ask the switch driver where the CPU port is. SVN-Revision: 35624	2013-02-16 16:24:15 +00:00
Hauke Mehrtens	92d16f38d7	brcm47xx: fix network config on simpleshare ... The included patch will generate a correct network configuration on the simpletech simpleshare. Thank you for the patch Will Holmes (RealOpty) This closes #12361. SVN-Revision: 35623	2013-02-16 15:24:48 +00:00
Hauke Mehrtens	a21ba013f5	brcm47xx: handle return values of cfe_env_get() correctly. ... This closes #12746. SVN-Revision: 35622	2013-02-16 15:19:24 +00:00
Hauke Mehrtens	283bff02a2	brcm47xx: bgmac: fix unaligned accesses to network headers. ... SVN-Revision: 35621	2013-02-16 14:38:17 +00:00
Hauke Mehrtens	5fed2916c3	brcm47xx: fix unaligned access to mac address ... The mac address should be aligned to u16 to prevent an unaligned access in drivers/ssb/pci.c where it is casted to __be16. This closes #9824. SVN-Revision: 35618	2013-02-16 13:46:00 +00:00
Hauke Mehrtens	d9580d224a	brcm47xx: try to automatically detect if the wan port is at port 4 and not at port 0. ... This should fix #13000. SVN-Revision: 35617	2013-02-16 12:37:24 +00:00
Gabor Juhos	7f20c2e19a	update x86 generic to kernel v3.7 ... Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35616	2013-02-16 12:12:52 +00:00
Gabor Juhos	7fd8525853	ramips: use the new macaddr_* helpers instead of maccalc ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35615	2013-02-16 11:50:25 +00:00
Gabor Juhos	753d713e92	ramips: use the mtd_get_mac_* helpers ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35613	2013-02-16 11:50:21 +00:00
Jonas Gorski	dd77663fb0	kernel: add missing config options ... r35336 exposed PTP, which has additional drivers on ixp4xx, causing it to not build with PTP enabled. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35611	2013-02-16 11:39:45 +00:00
Jonas Gorski	485e52e1d8	bcm63xx: make nvram checksum failures non fatal ... fixes #12982. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35605	2013-02-15 12:23:49 +00:00
Gabor Juhos	162b8e23a5	kernel: update linux 3.7 to 3.7.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35604	2013-02-15 07:36:15 +00:00
Gabor Juhos	f35c369710	generic: ar8216: move PHY4 RGMII workaround code out of the loop ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35603	2013-02-14 14:55:40 +00:00
Gabor Juhos	d64888ffc0	generic: ar8216: register the switch from the probe routine ... Currently the switch gets registered when an ethernet driver connects to a PHY of the switch. This method does not work with the ethernet drivers which are connecting to the PHY from their ndo_open callback. With those ethernet drivers, the driver tries to register the switch each time when the etherned device is opened and this causes a deadlock. Move the switch registration into the probe routine to fix this problem. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35602	2013-02-14 14:01:24 +00:00
Florian Fainelli	31dc805f88	x86: update config-3.7 for x86 (turn off CONFIG_GPIO_ICH) ... Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35601	2013-02-14 13:00:07 +00:00
Hauke Mehrtens	c0f6c75cf7	brcm47xx: if the cpuport of the switch is port 8 assume vlan0ports: "1 2 3 4 8" and vlan0ports: "0 8" ... SVN-Revision: 35597	2013-02-14 12:38:16 +00:00
Gabor Juhos	9d86ba2ed4	mpc85xx: enable swconfig and the ar8216 driver ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35592	2013-02-13 16:51:23 +00:00
Gabor Juhos	6d18518e02	mpc85xx: enable the squashfs driver ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35591	2013-02-13 16:51:21 +00:00
Gabor Juhos	c3b3f77621	mpc85xx: enable XZ_DEC_BCJ and XZ_DEC_POWERPC support ... Squashfs is unable to decompress some blocks without that: [ 199.494500] SQUASHFS error: xz_dec_run error, data probably corrupt [ 199.500910] SQUASHFS error: squashfs_read_data failed to read block 0xbff26 [ 199.508016] SQUASHFS error: Unable to read data cache entry [bff26] [ 199.514440] SQUASHFS error: Unable to read page, block bff26, size 153f8 [ 199.521311] SQUASHFS error: Unable to read data cache entry [bff26] [ 199.527724] SQUASHFS error: Unable to read page, block bff26, size 153f8 [ 199.534594] SQUASHFS error: Unable to read data cache entry [bff26] [ 199.541009] SQUASHFS error: Unable to read page, block bff26, size 153f8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35590	2013-02-13 16:51:19 +00:00
Gabor Juhos	7484006498	ar71xx: fix factory image creation for dir-825-c1 ... Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35589	2013-02-13 16:36:26 +00:00
Gabor Juhos	5f10ec3c36	ar71xx: fix switch-config for dir-825-c1 ... Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35588	2013-02-13 16:36:23 +00:00
Hauke Mehrtens	54ca3eed5d	brcm47xx: configure vlan correctly on some recent devices. ... SVN-Revision: 35587	2013-02-13 16:05:52 +00:00
Hauke Mehrtens	4663d424a3	brcm47xx: add some more fixes to bgmac ... Thank you Rafał Miłecki and Nathan Hintz SVN-Revision: 35574	2013-02-12 20:10:38 +00:00
Hauke Mehrtens	7c0208b336	brcm47xx: update tg3 to the version send upstream ... SVN-Revision: 35573	2013-02-12 20:09:15 +00:00
Luka Perkov	7973ef64d6	mvebu: remove boards suffix ... SVN-Revision: 35572	2013-02-12 10:18:53 +00:00
Gabor Juhos	bae4bfe3f8	kernel: update linux 3.7 to 3.7.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35571	2013-02-12 09:51:11 +00:00
Gabor Juhos	1f9ede9cfc	ar71xx: add script for automatic switch name migration ... Thanks to Jonas Gorski for the help. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35567	2013-02-11 21:41:16 +00:00
Felix Fietkau	2e7a4b088d	ar71xx: allow unknown multicast frames to pass to the CPU on AR934x ... SVN-Revision: 35564	2013-02-11 18:59:05 +00:00
Gabor Juhos	9525a075c1	ar8216: remove superfluous code from ar8216_config_init ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35562	2013-02-11 16:57:31 +00:00
Gabor Juhos	94806a13af	ar71xx: use switchX names in network configuration ... Accessing the AR8xxx switches via the name of the attached ethernet device is not possible since r35560. Change the uci-defaults script to use switchX names in switch configurations. Reported-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35561	2013-02-11 16:54:52 +00:00
Gabor Juhos	9c86d268eb	generic: ar8216: don't use ethernet device name in register_switch ... The switches are accessed via an MDIO bus. Set the alias to the name of the MDIO bus, and show that in the message along with the name of the switch switch device. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35560	2013-02-11 16:11:31 +00:00
Gabor Juhos	3f3eba88f6	generic: ar8216: reuse the private data from ar8216_probe ... The private data of the switch is already allocated in ar8216_priv, assign that to each PHY on the same MDIO bus. Also remove the redundant code from ar8216_config_init. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35559	2013-02-11 16:11:30 +00:00
Gabor Juhos	1afb759b35	generic: ar8216: use phydev instead of pdev everywhere ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35555	2013-02-11 13:25:43 +00:00
Gabor Juhos	0b1fe07e8e	generic: ar8216: use pr_* macros for kernel messages ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35554	2013-02-11 13:14:00 +00:00
Gabor Juhos	eea297884e	generic: ar8216: fix PHY features setup ... Sujith says: This commit breaks the WAN port on my AP96 - DHCP fails. Reverting it fixes the issue. commit b67cc3a0cdd02973610d4d5a63226d1c44841e94 Author: juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> Date: Fri Feb 8 09:13:18 2013 +0000 generic: ar8216: simplify phy features setup Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@355183c298f89-4303-0410-b956-a3cf2f4a3e73 This change restores the previous behaviour and moves the code into the ar8216_probe function. Reported-by: Sujith Manoharan <sujith@msujith.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Tested-by: Sujith Manoharan <sujith@msujith.org> SVN-Revision: 35549	2013-02-11 10:05:35 +00:00
Gabor Juhos	617076c613	generic: ar8216: add ar8xxx_probe_switch helper ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35547	2013-02-10 19:02:01 +00:00
Gabor Juhos	98b13e39ac	generic: ar8216: rename ar8xxx_mib_cleanup to ar8xxx_mib_stop ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35546	2013-02-10 18:42:08 +00:00
Gabor Juhos	f97170a720	generic: ar8216: free mib counters from ar8xxx_free ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35545	2013-02-10 18:42:07 +00:00
Gabor Juhos	7924e517af	generic: ar8216: add ar8xxx_free helper ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35544	2013-02-10 18:42:05 +00:00
Gabor Juhos	77b3c551c4	generic: ar8216: add ar8xxx_create{,mii} helpers ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35543	2013-02-10 18:42:04 +00:00
Gabor Juhos	5f70b1db2a	generic: ar8216: remove redundant phy address check ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35542	2013-02-10 18:38:12 +00:00
Gabor Juhos	14fd37258b	generic: ar8216: only set phy_ptr if packet mangling is used ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35541	2013-02-10 18:38:10 +00:00
Gabor Juhos	393163b098	generic: ar8216: add defines for the AR8316 POSTRIP register ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35539	2013-02-10 13:18:48 +00:00
Gabor Juhos	5ed480598d	generic: ar8216: don't probe the chip multiple times ... It is only needed when the private data is allocated. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35538	2013-02-10 13:05:15 +00:00
Gabor Juhos	774da6c7a4	generic: ar8216: add sanity check to ar8216_probe ... Verify that the mdio bus has PHY devices with a supported PHY ID at address 0-4. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35537	2013-02-10 13:05:14 +00:00
Gabor Juhos	4720c75cf7	generic: ar8216: skip probe on unused PHY addresses ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35536	2013-02-10 13:05:12 +00:00
Jonas Gorski	f07a33afc2	ar71xx: register the micro sd card reader on RB493G ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35535	2013-02-10 12:31:38 +00:00
Jonas Gorski	eedc3554fe	generic: b53: fix reverted error check in probe ... b53_switch_detect returns value returned by b53_read8, which is 0 for success. So fail (and return error) only if b53_switch_detect returned something else than 0. This fixes supported and advertising being zeros for MDIO access. Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 35534	2013-02-10 12:31:36 +00:00
Jonas Gorski	200359a520	bcm63xx: handle huawei nvram layout ... Use a different length for calculating the nvram checksum on hauwei boards. Fixes boot on HW553 and HW556. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35533	2013-02-10 12:31:31 +00:00
Gabor Juhos	de123c4409	generic: ar8216: move sleep out of the loop ... It is enough to sleep once after ANEG is enabled on all PHYs. This reduces boot time on boards with AR8316 switch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35532	2013-02-09 13:26:04 +00:00
Gabor Juhos	6ff973bdda	ar71xx: Routerboard 751 Mac Address Offset Fix ... We utilize many Routerboard 751's and discovered that our latest batch of RB751's would not initialize the wireless radio. We have determined Mikrotik has changed where the mac address was located inside hardconfig. As such we utilize "routerboot_find_tag" to find the location of the mac address. We should remove "RB751_MAC_ADDRESS_OFFSET" as it is ambiguous by machine manufacturing date. The newer batch of RB751's that we received had a RB751_MAC_ADDRESS_OFFSET 0x10. Signed-off-by: Davey Hutchison <dhutchison@bluemesh.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35519	2013-02-08 09:34:53 +00:00
Gabor Juhos	aa04441904	generic: ar8216: simplify phy features setup ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35518	2013-02-08 09:13:18 +00:00
Gabor Juhos	9c1f95a416	generic: ar8216: don't use mdio bus specific functions in ar8216_id_chip ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35517	2013-02-08 09:13:14 +00:00
Gabor Juhos	5393efc0c7	generic: ar8216: use inline function to convert swdev to ar8216 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35514	2013-02-07 15:18:36 +00:00
Gabor Juhos	b87a1c757d	generic: ar8216: add mii_bus field to struct ar8216_priv ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35513	2013-02-07 15:18:35 +00:00
Gabor Juhos	c130a3feac	generic: mvswitch: add detach callback ... Use the detach callback to disable packet mangling to avoid possible NULL pointer dereference. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35512	2013-02-07 15:18:34 +00:00
Gabor Juhos	4be8c22e74	generic: ar8216: add detach callback ... The current code uses the 'remove' callback to disable packet mangle on the underlying ethernet device. However the attached_dev is always NULL when the 'remove' callback is called by phylib, and this causes NULL pointer dereference, like this: [ 475.300000] CPU 0 Unable to handle kernel paging request at virtual address 000000f0, epc == 801cdcf0, ra == 801c7eac [ 475.310000] Oops[#1]: [ 475.310000] Cpu 0 [ 475.310000] $ 0 : 00000000 00000000 00000000 00000001 [ 475.310000] $ 4 : 828dde00 00000005 828dde08 ffffffff [ 475.310000] $ 8 : 00380081 00380081 82902a40 00000001 [ 475.310000] $12 : 00000037 00370081 00000001 00000000 [ 475.310000] $16 : 82865000 828dde08 828dde00 00000001 [ 475.310000] $20 : 00000080 00460000 00000002 77151448 [ 475.310000] $24 : 00000000 801abfd4 [ 475.310000] $28 : 82cc2000 82cc3d58 0053c3c4 801c7eac [ 475.310000] Hi : 00000007 [ 475.310000] Lo : 00000004 [ 475.310000] epc : 801cdcf0 ar8216_remove+0x1c/0x94 [ 475.310000] Tainted: G O [ 475.310000] ra : 801c7eac phy_remove+0x4c/0x6c [ 475.310000] Status: 1000cc03 KERNEL EXL IE [ 475.310000] Cause : 00800008 [ 475.310000] BadVA : 000000f0 [ 475.310000] PrId : 00019750 (MIPS 74Kc) [ 475.310000] Modules linked in: ath79_wdt ledtrig_usbdev ledtrig_netdev ag71xx(-) nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ft p ipt_MASQUERADE iptable_nat xt_nat nf_nat_ipv4 nf_nat pppoext_conntrack xt_CT iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_co nntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpu dp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80 211(O) compat(O) arc4 crypto_blkcipher aead ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O) [ 475.310000] Process rmmod (pid: 1160, threadinfo=82cc2000, task=83969920, tls=7747c440) [ 475.310000] Stack : 828dde08 802f5004 802f4680 00000001 828ddf70 801c7eac 802f4680 801ad6d8 82902940 00000000 828dde08 802f5004 802f4680 801ad770 00000002 80269d94 00000000 00000001 00000080 828dde08 828dde3c 801ad7fc 82902940 00000000 83859100 00000000 8384dd2c 8384dd2c 828dde08 801ad230 82902800 00000000 00000000 001a0041 828dde08 828dde08 802e80e8 801aac44 00000080 00460000 ... [ 475.310000] Call Trace: [ 475.310000] [<801cdcf0>] ar8216_remove+0x1c/0x94 [ 475.310000] [<801c7eac>] phy_remove+0x4c/0x6c [ 475.310000] [<801ad770>] __device_release_driver+0x6c/0xd0 [ 475.310000] [<801ad7fc>] device_release_driver+0x28/0x40 [ 475.310000] [<801ad230>] bus_remove_device+0xd8/0x10c [ 475.310000] [<801aac44>] device_del+0x110/0x170 [ 475.310000] [<801aacb8>] device_unregister+0x14/0x28 [ 475.310000] [<801c92b0>] mdiobus_unregister+0x4c/0x70 [ 475.310000] [<82913060>] ag71xx_remove_ar8216_header+0xdc/0x5a8 [ag71xx] [ 475.310000] [ 475.310000] Code: 1200001c 8c82017c ac800128 <8c4500f0> 3c03ffdf 3463ffff 00a31824 ac4300f0 ac4000e0 Add a detach callback and disable packet mangling in that to fix the problem. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35511	2013-02-07 15:18:32 +00:00
Gabor Juhos	fe61fc2d7d	generic: add detach callback to struct phy_driver ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35510	2013-02-07 15:18:24 +00:00
Hauke Mehrtens	07db9e8eab	brcm47xx: fix name of kmod-ocf-ubsec-ssb ... This also removes kmod-ocf, because kmod-crypto-ocf is automatically selected by kmod-ocf-ubsec-ssb. Thank you Manuel Munz <freifunk@somakoma.de> for the patch. SVN-Revision: 35509	2013-02-06 22:51:25 +00:00
Hauke Mehrtens	a52832164b	brcm47xx: bgmac: make it possible to set the devices into promisc mode when it is already up ... This fixes #12927. SVN-Revision: 35507	2013-02-06 14:57:00 +00:00
Florian Fainelli	6b0da6db6a	remove support for 3.6 kernel ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35506	2013-02-05 22:36:54 +00:00
Florian Fainelli	e22926a46b	make default version 3.7.6 ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35505	2013-02-05 22:36:50 +00:00
Florian Fainelli	57803a98ec	remove superfluous calls to /lib/brcm63xx.sh ... The first preinit script 03_do_brcm63xx.sh does the right job of exporting variables for the other subsequent preinit scripts to use them. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35504	2013-02-05 22:25:30 +00:00
Florian Fainelli	84d306d23c	remove references to the old switch driver ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35503	2013-02-05 22:25:19 +00:00
Mirko Vogt	ec19a23bae	fix trx checksum after first boot and add led/button definitions for boards RTA770BW and RTA770W ... SVN-Revision: 35501	2013-02-05 14:57:43 +00:00
Mirko Vogt	f460388ce2	add support for board named RTA770W ... Actually this board is the very same as the rta770bw, where the additional 'b' within the name just indicates 'Annex B'. The ADSL Modem itself is able to handle both, Annex A as well as Annex B - the loaded firmware makes the only difference SVN-Revision: 35500	2013-02-05 14:57:40 +00:00
Gabor Juhos	395d0bdc1f	generic: ar8216: clear driver specific data pointer in phy_device ... This is needed to avoid a NULL pointer dereference: [ 19.525270] Unable to handle kernel paging request for data at address 0x00000018 [ 19.532750] Faulting instruction address: 0xc016e104 [ 19.537714] Oops: Kernel access of bad area, sig: 11 [#1] [ 19.543102] P1010 RDB [ 19.545365] Modules linked in: booke_wdt nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat xt_nat d [ 19.590725] NIP: c016e104 LR: c0171490 CTR: 00000000 [ 19.595681] REGS: c4bc3c10 TRAP: 0300 Tainted: G W O (3.7.6) [ 19.602284] MSR: 00029000 <CE,EE,ME> CR: 82002022 XER: 20000000 [ 19.608381] DEAR: 00000018, ESR: 00000000 [ 19.612382] TASK = c4cd9c80[2070] 'ifconfig' THREAD: c4bc2000 GPR00: 00000001 c4bc3cc0 c4cd9c80 00000000 c7811000 00000000 00000000 0000e8ec GPR08: 0000e8eb 00000000 00029000 00000001 00000000 100801f8 1005c51c 1005c514 GPR16: 1005c468 1005c54c 1005c258 1005c530 10060000 00000000 c7811000 ffff8914 GPR24: c7815030 c793e400 10063adb 00000000 c7811000 c045594c c78ca600 c7815000 [ 19.646352] NIP [c016e104] register_switch+0x98/0x2d0 [ 19.651397] LR [c0171490] ar8216_config_init+0x2d8/0x3f4 [ 19.656697] Call Trace: [ 19.659138] [c4bc3cc0] [c0170490] ar8216_mii_read+0x64/0xc4 (unreliable) [ 19.665835] [c4bc3d00] [c0171490] ar8216_config_init+0x2d8/0x3f4 [ 19.671835] [c4bc3d20] [c016cf8c] phy_init_hw+0x50/0x6c [ 19.677053] [c4bc3d30] [c016d078] phy_attach_direct+0xd0/0xf8 [ 19.682793] [c4bc3d50] [c016d154] phy_connect_direct+0x24/0x68 [ 19.688621] [c4bc3d70] [c0183b70] of_phy_connect+0x48/0x6c [ 19.694102] [c4bc3d90] [c0175aac] gfar_enet_open+0x254/0x3d8 [ 19.699755] [c4bc3db0] [c019acc4] __dev_open+0xc0/0x120 [ 19.704975] [c4bc3dd0] [c019af98] __dev_change_flags+0xd4/0x15c [ 19.710888] [c4bc3df0] [c019b0d4] dev_change_flags+0x1c/0x60 [ 19.716544] [c4bc3e10] [c01ebb94] devinet_ioctl+0x290/0x690 [ 19.722111] [c4bc3e70] [c01ec8d4] inet_ioctl+0x88/0xbc [ 19.727245] [c4bc3e80] [c0186b98] sock_ioctl+0x258/0x294 [ 19.732551] [c4bc3ea0] [c009c00c] do_vfs_ioctl+0x6a4/0x728 [ 19.738031] [c4bc3f10] [c009c0d4] sys_ioctl+0x44/0x70 [ 19.743077] [c4bc3f40] [c000c74c] ret_from_syscall+0x0/0x3c [ 19.748646] --- Exception: c01 at 0x48091b34 [ 19.748646] LR = 0x480e4b64 [ 19.756033] Instruction dump: [ 19.758991] 2f830000 907f0050 3860fff4 419e021c 837f0000 38000000 901f0038 901f0040 [ 19.766744] 901f003c 7f600034 5400d97e 0f000000 <801b0018> 2f800000 40be0010 801b001c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35497	2013-02-05 08:39:26 +00:00
Gabor Juhos	2e7f38c243	generic: ar8216: unregister switch on error path ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35496	2013-02-05 08:39:24 +00:00
Gabor Juhos	1bb8ad6050	mpc85xx: enable GPIO sysfs interface ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35495	2013-02-05 07:48:02 +00:00
Gabor Juhos	6ba265a573	mpc85xx: enable Freescale eSPI driver and m25p80 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35494	2013-02-05 07:48:01 +00:00
Gabor Juhos	eea43ffd33	mpc85xx: sync kernel config ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35493	2013-02-05 07:47:59 +00:00
Hauke Mehrtens	8ba8225686	brcm47xx: fix detection of Asus RT-N16 ... This fixes #12936. SVN-Revision: 35492	2013-02-04 22:49:05 +00:00
Hauke Mehrtens	a1e3c0ca46	Add Failsafe support for Linksys E3000V1 / WRT610NV2 ... Adds specification of the correct cpu_port for Linksys E3000V1 and WRT610NV2 in /lib/preinit/05_init_interfaces_brcm. The list of devices will need to be expanded. Is there a way to determine the correct cpu_port to use in a generic sense; for instance, if "/proc/switch/eth0/port/8" exists, or if "/sys/class/net/eth0/device/driver/module/drivers/bcma:bgmac" exists? Could a similar method be used in "/etc/init.d/netconfig"? Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 35491	2013-02-04 22:40:57 +00:00
Hauke Mehrtens	c2198aba32	brcm47xx: Fix switch config on 4716/53115 devices ... Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> SVN-Revision: 35490	2013-02-04 22:38:37 +00:00
Gabor Juhos	b97aee1ee8	coldfire: R.I.P. ... The target still uses 2.6.38. The support of that kernel version has been removed ~9 months ago. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35489	2013-02-04 15:23:10 +00:00
Gabor Juhos	c41002971a	leon: R.I.P. ... It is broken since ~9 months and nobody takes care of that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35488	2013-02-04 15:23:08 +00:00
Gabor Juhos	539e0b5b84	imx21: R.I.P. ... It is broken since ~22 months and nobody takes care of that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35487	2013-02-04 15:23:07 +00:00
Gabor Juhos	e7dee4ea87	octeon: R.I.P. ... It is broken since ~8 months and nobody takes care of that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35486	2013-02-04 15:23:05 +00:00
Gabor Juhos	da44b916cf	omap35xx: R.I.P. ... It is broken since ~22 months and nobody takes care of that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35485	2013-02-04 15:23:04 +00:00
Jonas Gorski	8506964e6d	bcm63xx: add support for linux 3.8 ... Based on 3.8-rc6 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35482	2013-02-04 10:19:55 +00:00
Jonas Gorski	3b4fced67d	bcm63xx: add support for linux 3.7 ... Based on 3.7.6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35481	2013-02-04 10:19:50 +00:00
Jonas Gorski	0e9365b346	kernel: generic: update the ehci overcurrent patch to upstream submission ... Adds support for setting this in the generic platform driver's platform_data. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35480	2013-02-04 10:19:37 +00:00
Jonas Gorski	e0fe5596f8	kernel: generic: add back the patch exporting bcm63xx tag header ... It went missing when adding linux 3.7 support. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35479	2013-02-04 10:19:35 +00:00
Jonas Gorski	34ad8f4e75	kernel: generic: update to 3.8-rc6 ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35478	2013-02-04 10:19:28 +00:00
Jonas Gorski	a15e1a950d	bcm63xx: refresh 3.6 patches ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35477	2013-02-04 10:19:24 +00:00
Gabor Juhos	08ff976720	kernel: update linux 3.7 to 3.7.6 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35476	2013-02-04 10:02:56 +00:00
Gabor Juhos	b1168e70d3	ar71xx: use backported PCI_MEM_SIZE patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35470	2013-02-02 18:17:58 +00:00
Gabor Juhos	b9b341f05a	ar71xx: rename ar933x_uart patch ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35469	2013-02-02 18:17:53 +00:00
Gabor Juhos	9ed81a91f3	ramips: build image for the Omnima EMB HPM board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35468	2013-02-02 17:21:06 +00:00
Gabor Juhos	813aec6796	ramips: add user-space support for the Omnima EMB HPM board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35467	2013-02-02 17:21:05 +00:00
Gabor Juhos	d578f3ac38	ramips: rt3883: add kernel support for the Omnima EMB HPM board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35466	2013-02-02 17:21:01 +00:00
Gabor Juhos	b99b2ff553	ramips: add userspace support for the Edimax BR-6425 ... [juhosg: remove sysupgrade changes] Signed-off-by: Yuval Adam <yuv.adm@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35463	2013-02-02 17:01:50 +00:00
Gabor Juhos	0a42e38bad	ramips: add kernel support for the Edimax BR-6425 board ... Signed-off-by: Yuval Adam <yuv.adm@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35462	2013-02-02 17:01:47 +00:00
Gabor Juhos	4ac6eb480b	x86/kvm_guest: add support for 3.7 ... Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35460	2013-02-02 15:31:57 +00:00
Gabor Juhos	c340ef2ae2	x86: add missing symbols for 3.7 ... Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35459	2013-02-02 15:31:55 +00:00
Gabor Juhos	0f46f47512	x86/kvm_guest: add missing symbols for 3.3 ... Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35458	2013-02-02 15:31:54 +00:00
Gabor Juhos	ab3e3cacaa	alix2: convert from kernel version 3.3.8 to 3.7.5 ... [juhosg: use 3.7.5 instead of 3.7.3] Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35457	2013-02-02 15:31:52 +00:00
Gabor Juhos	4c223d7d4f	generic: convert crypto-ocf from kernel_thread to kthread ... recent kernels have finally stopped exporting kernel_thread, since a deprecation circa 2006. This patch attempts to convert to the newer kernel kthread API, particularly in random.c [juhosg: remove randomproc variable, it is not required after the patch] Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35456	2013-02-02 15:31:44 +00:00
Gabor Juhos	7c87d28054	ar71xx: fixes whitespaces for dir-825-c1 ... Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35455	2013-02-02 15:02:19 +00:00
Gabor Juhos	ecf55822bb	mpc85xx: nuke 3.6 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35453	2013-02-02 10:05:43 +00:00
Gabor Juhos	242859abae	mpc85xx: switch to 3.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35452	2013-02-02 10:05:40 +00:00
Gabor Juhos	cde71c305c	mpc85xx: add support for linux 3.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35451	2013-02-02 10:05:37 +00:00
Gabor Juhos	bbfd8cbf94	linux/3.7: add missing config symbols ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35450	2013-02-02 10:05:08 +00:00
Gabor Juhos	9a438b2271	ar71xx: build images for the TP-LINK TL-WR743ND v2 ... AR9331 based, these same as 741v4 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35449	2013-02-02 10:01:15 +00:00
Gabor Juhos	668e529220	generic: fix gc_sections patch ... Due to the patch, essential '.data..*' sections are merged into the '.data' section: --- vmlinux.good.sect 2013-02-01 23:49:16.000000000 +0100 +++ vmlinux.bad.sect 2013-02-01 23:49:02.000000000 +0100 @@ -1,5 +1,5 @@ -vmlinux.good: file format elf32-powerpc +vmlinux.bad: file format elf32-powerpc Sections: Idx Name Size VMA LMA File off Algn @@ -53,43 +53,35 @@ CONTENTS, ALLOC, LOAD, READONLY, DATA 24 .machine.desc 00000460 c04e1000 004e1000 004f1000 2**2 CONTENTS, ALLOC, LOAD, DATA - 25 .data 0000f6a0 c04e2000 004e2000 004f2000 2**12 + 25 .data 0001635c c04e2000 004e2000 004f2000 2**12 CONTENTS, ALLOC, LOAD, DATA - 26 .data..init_task 00002000 c04f2000 004f2000 00502000 2**3 - CONTENTS, ALLOC, LOAD, DATA - 27 .data..page_aligned 00002000 c04f4000 004f4000 00504000 2**12 - CONTENTS, ALLOC, LOAD, DATA - 28 .data..cacheline_aligned 00000c00 c04f6000 004f6000 00506000 2**5 - CONTENTS, ALLOC, LOAD, DATA - 29 .data..read_mostly 000015e0 c04f6c00 004f6c00 00506c00 2**3 - CONTENTS, ALLOC, LOAD, DATA - 30 .sbss 000002e0 c04f9000 004f9000 005081e0 2**3 + 26 .sbss 000002e0 c04fa000 004fa000 0050835c 2**3 <...> This causes boot hang on powerpc. Modify the patch to ensure that the kernel specific '.data..*' sections remain separate. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35447	2013-02-02 09:30:47 +00:00
Gabor Juhos	31af0dc186	ar71xx: fix mac address calculation on the OpenMesh MR600 ... Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35446	2013-02-02 08:47:41 +00:00
Gabor Juhos	257b21f2d4	mpc85xx: nuke 3.3 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35445	2013-02-01 17:49:56 +00:00
Gabor Juhos	cf2faab4ae	mpc85xx: switch to 3.6 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35444	2013-02-01 17:49:54 +00:00
Gabor Juhos	56849d146c	mpc85xx: add support for 3.6 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35443	2013-02-01 17:49:53 +00:00
Gabor Juhos	630fffbead	mpc85xx: fix dts name for P1010RDB ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35442	2013-02-01 17:49:52 +00:00
Gabor Juhos	a2529eab2b	linux/3.6: add missing config symbols ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35441	2013-02-01 17:30:18 +00:00
Gabor Juhos	fb936218a1	linux/3.6: refresh patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35440	2013-02-01 17:30:15 +00:00
Gabor Juhos	495820f7a0	mpc85xx: remove broken flag ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35439	2013-02-01 17:28:54 +00:00
Gabor Juhos	4cb7e749ab	mpc85xx: build fdt file for the PB1010RDB board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35438	2013-02-01 17:28:51 +00:00
Gabor Juhos	20ca35570e	mpc85xx: enable PB1010RDB support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35437	2013-02-01 17:28:49 +00:00
Gabor Juhos	21b15ddda5	mpc85xx: image: fix building of multiple dtb files ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35436	2013-02-01 17:28:47 +00:00
Gabor Juhos	d158dfc607	linux/3.3: disable crashlog on PPC ... It causes NULL pointer dereference: [ 0.638235] __ioremap(): phys addr 0x7f00000 is RAM lr c025d61c [ 0.644090] Unable to handle kernel paging request for data at address 0x00000000 [ 0.651533] Faulting instruction address: 0xc025d620 [ 0.656483] Oops: Kernel access of bad area, sig: 11 [#1] [ 0.661856] P1010 RDB [ 0.664113] Modules linked in: [ 0.667152] NIP: c025d620 LR: c025d61c CTR: c000dc38 [ 0.672101] REGS: c7831ef0 TRAP: 0300 Not tainted (3.3.8) [ 0.677740] MSR: 00029000 <CE,EE,ME> CR: 42022082 XER: 20000000 [ 0.683817] DEAR: 00000000, ESR: 00000000 [ 0.687811] TASK = c782c000[1] 'swapper' THREAD: c7830000 [ 0.693017] GPR00: a1ee0000 c7831fa0 c782c000 00000000 0000214c ffffffff c7831ea6 0001ffff [ 0.701350] GPR08: c03697cc c035fba0 c03697cc c0360000 42022022 00000000 00000000 00000000 [ 0.709682] GPR16: c0000a00 00000014 3fffffff 00ffa000 00000015 07fc42bc c0360000 00000000 [ 0.718015] GPR24: 00000000 00000000 00001680 c0360000 00000000 c025d5e8 c0390000 c038b824 [ 0.726535] NIP [c025d620] crashlog_init_fs+0x38/0xd8 [ 0.731560] LR [c025d61c] crashlog_init_fs+0x34/0xd8 [ 0.736503] Call Trace: [ 0.738939] [c7831fa0] [c025d61c] crashlog_init_fs+0x34/0xd8 (unreliable) [ 0.745712] [c7831fb0] [c0001e98] do_one_initcall+0xd4/0x198 [ 0.751357] [c7831fe0] [c02537f4] kernel_init+0x9c/0x120 [ 0.756647] [c7831ff0] [c000c2dc] kernel_thread+0x4c/0x68 [ 0.762022] Instruction dump: [ 0.764975] 3860fff4 bfc10008 3fc0c039 90010014 3bfeb824 801f0004 2f800000 41be00a0 [ 0.772699] 7c030378 38804000 4bdb38cd 3c00a1ee <81630000> 6000dead 7c691b78 907eb824 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35435	2013-02-01 17:28:44 +00:00
Gabor Juhos	fb2e2a56d7	refresh kernel configs ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35434	2013-02-01 17:28:40 +00:00
Gabor Juhos	6805275fdc	ar71xx: sysupgrade - fix OpenMesh MR600 total flash size ... Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35433	2013-02-01 15:50:54 +00:00
Gabor Juhos	979676ffcc	ar71xx: add sysupgrade support for OpenMesh MR600v2 ... Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35430	2013-02-01 15:50:47 +00:00
Gabor Juhos	2af995ba1d	ar71xx: add user-space support for OpenMesh MR600v2 ... Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35429	2013-02-01 15:50:45 +00:00
Gabor Juhos	8837d3a49b	ar71xx: add kernel support for the OpenMesh MR600v2 ... Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35428	2013-02-01 15:50:42 +00:00
Gabor Juhos	150bb9d0b1	ar71xx: remove unused OpenMesh MR600 led definitions ... Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35427	2013-02-01 15:50:39 +00:00
Gabor Juhos	fe3db74276	ar71xx: remove unused OpenMesh MR6000 platform code ... Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35426	2013-02-01 15:50:37 +00:00
Gabor Juhos	492cbcdd6b	ar71xx: build image for the TL-WDR3500 board ... Based on http://patchwork.openwrt.org/patch/3208/ Thanks-to: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gui Iribarren <gui@altermundi.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35425	2013-02-01 15:50:34 +00:00
Gabor Juhos	119dc460a3	ar71xx: add user-space support for TL-WDR3500 board ... Based on http://patchwork.openwrt.org/patch/3208/ Thanks-to: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gui Iribarren <gui@altermundi.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35424	2013-02-01 15:50:32 +00:00
Gabor Juhos	5bd02ca895	ar71xx: add kernel support for the TL-WDR3500 board ... WDR3500 is similar to WDR3600 except it doesn't have gigabit ethernet, and has only 1 USB port. Pending issues: * Leds are not working at all (except power and wlan_5g) * LAN switch ethernet ports are reversed with respect to case label. [Label] -> soft device [LAN1] -> eth0.4 [LAN2] -> eth0.3 [LAN3] -> eth0.2 [LAN4] -> eth0.1 Based on http://patchwork.openwrt.org/patch/3208/ Thanks-to: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gui Iribarren <gui@altermundi.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35423	2013-02-01 15:50:29 +00:00
Jonas Gorski	ce8b226046	bcm63xx: replace kmod-switch with swconfig in default package set ... Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35407	2013-01-30 00:19:21 +00:00
Gabor Juhos	f7ff677169	ar71xx: add profile and build image for dir-825-c1 ... Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35403	2013-01-29 22:50:57 +00:00
Gabor Juhos	2a5193308f	ar71xx: add user space support for dir-825-c1 ... [juhosg: fix whitespaces in some scripts] Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35402	2013-01-29 22:50:54 +00:00
Gabor Juhos	800da21cb1	ar71xx: add kernel support for dir-825-c1 ... [juhosg: - remove unused GPIO stuff - use a separate kernel patch for machine integration] Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35401	2013-01-29 22:50:50 +00:00
Gabor Juhos	5a2aa8f184	generic: fix default compression selection in ubifs ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35398	2013-01-29 21:32:22 +00:00
Gabor Juhos	da9a704e92	ar71xx: add profile and generate images for the AP132 board ... Based on http://patchwork.openwrt.org/patch/3162/ Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35397	2013-01-29 19:12:34 +00:00
Gabor Juhos	5d4ddbce72	ar71xx: add user-space support for the AP132 board ... Based on http://patchwork.openwrt.org/patch/3162/ Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35396	2013-01-29 19:12:32 +00:00
Gabor Juhos	5ca187570f	ar71xx: add kernel support for Atheros AP132 Reference Board ... Based on http://patchwork.openwrt.org/patch/3162/ Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35395	2013-01-29 19:12:30 +00:00
Gabor Juhos	8a9d92f125	ar71xx: fix ethernet device registration for the QCA9556 SoC ... Based on http://patchwork.openwrt.org/patch/3162/ Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35394	2013-01-29 19:12:28 +00:00
Gabor Juhos	e9dbff1193	ar71xx: add kernel support for the QCA9556 SoC ... Based on http://patchwork.openwrt.org/patch/3162/ Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35393	2013-01-29 19:12:26 +00:00
Gabor Juhos	df15e5cd61	ar71xx: enable fast flash read on dual-flash devices ... This improves flash read speed on various Buffalo units. mtd_speedtest results on the WZR-HP-AG300H: old new delta eraseblock read speed: 726 KiB/s 2068 KiB/s +184.85% page read speed: 699 KiB/s 1973 KiB/s +182.26% 2 page read speed: 711 KiB/s 2043 KiB/s +187.34% Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35392	2013-01-29 19:12:25 +00:00
Gabor Juhos	562ba537fc	kernel: update linux 3.7 to 3.7.5 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35390	2013-01-29 18:29:45 +00:00
John Crispin	c6744513a3	fix mtd_mp25p80_add_gd25q32_gd25q64.patch ... SVN-Revision: 35378	2013-01-29 11:06:57 +00:00
Florian Fainelli	714b2cfef3	Fix GigaDevice GD25Q32/GD25Q64 SPI Flash bad commit ... Fix GigaDevice GD25Q32/GD25Q64 SPI Flash bad commit. The patch was added to "linux/generic/patches-3.6" instead of "target/linux/generic/patches-3.6". I also fixed a missing patch space and refreshed generic patches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35367	2013-01-29 09:46:11 +00:00
Gabor Juhos	e252a1492c	generic: fix build failure in MIPS kexec code if SMP is enabled ... Fix it for older kernels as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35366	2013-01-29 09:44:58 +00:00
Gabor Juhos	22ce389e6a	ar71xx: add TP-LINK WA-801ND to run-time model detection ... A small cosmetic fix to show the HW model name correctly in LuCI. Patch-by: Amir Sagie <openwrt-devel@taproot.org.il> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35365	2013-01-29 09:40:29 +00:00
Gabor Juhos	1b3c6ad1fb	generic: fix build failure in MIPS kexec code if SMP is enabled ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35364	2013-01-29 09:40:23 +00:00
John Crispin	756a7c5451	fix for non-blinking LAN LEDs ... https://dev.openwrt.org/ticket/12830 SVN-Revision: 35359	2013-01-28 18:06:31 +00:00
John Crispin	a0f7a3c214	dont load gptu on ase ... fixes #12792 SVN-Revision: 35357	2013-01-28 17:46:07 +00:00
John Crispin	d93706154b	ramips: reset switch on single-port devices ... Signed-off-by: Daniel Gole <dgolle@allnet.de> SVN-Revision: 35356	2013-01-28 17:44:41 +00:00
John Crispin	0de0955931	refresh patches ... SVN-Revision: 35355	2013-01-28 17:44:20 +00:00
John Crispin	0183df8ed9	Fix ARV7518 USB ... This patch correctly fixes USB on Lantiq ARV7518. There was a failed attempt on fixing this on r35077 (https://dev.openwrt.org/changeset/35077/). Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 35354	2013-01-28 17:43:35 +00:00
John Crispin	3534757bb9	Add ath9k eeprom and pci fixup support ... Add ath9k eeprom and pci fixup support (again) for linux 3.7. On linux 3.3, the fixup forced the regdomain to 0x67, causing low TX power. This patch only corrects checksum, the rest of the EEPROM isn't changed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 35353	2013-01-28 17:43:25 +00:00
John Crispin	5eb43d4cf8	Add support for ARV4518PW R01 and rename R01A. ... There are two different versions of SMC7908A-ISP: R01 and R01A. R01 has an internal clock for PCI, meanwhile R01A has an external clock. This fixes: https://dev.openwrt.org/ticket/12884 Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 35352	2013-01-28 17:42:59 +00:00
Felix Fietkau	1dc9c8ef69	kernel: disable CONFIG_CRYPTO_MANAGER2, it is not needed ... SVN-Revision: 35342	2013-01-27 23:23:39 +00:00
Hauke Mehrtens	68aeb7af8e	brcm47xx: load pps_core and ptp before tg3 to make the interface available for failsafe. ... SVN-Revision: 35341	2013-01-27 21:48:28 +00:00
Hauke Mehrtens	a9175c90cf	kernel: b53: the b53 spi driver depends on spi ... SVN-Revision: 35340	2013-01-27 21:39:53 +00:00
Hauke Mehrtens	62554217fc	kernel: add packages for pps and ptp, they are needed by tg3 in kernel 3.8 ... SVN-Revision: 35336	2013-01-27 21:18:52 +00:00
Felix Fietkau	8193bbe59a	netfilter: add support for flushing conntrack via /proc ... SVN-Revision: 35330	2013-01-27 19:02:38 +00:00
Felix Fietkau	156a6e7999	kernel: clean up crypto kconfig options on 3.8 ... SVN-Revision: 35329	2013-01-27 17:49:09 +00:00
Hauke Mehrtens	721bf97863	kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8 ... These attributes where removed with kernel 3.8 and are now causing compile errors. SVN-Revision: 35328	2013-01-27 17:48:48 +00:00
Felix Fietkau	ed7ca5d44e	kernel: clean up crypto related kconfig options ... SVN-Revision: 35327	2013-01-27 17:23:12 +00:00
Felix Fietkau	8a1091ad53	ar71xx: disable support for unsupported mtd configuration, saves about 5K kernel size after lzma ... SVN-Revision: 35326	2013-01-27 16:38:27 +00:00
Felix Fietkau	044c316167	kernel: prevent cryptomgr from pulling in useless extra dependencies for tests that are not run ... Reduces kernel size after LZMA by about 5k on MIPS SVN-Revision: 35325	2013-01-27 16:21:08 +00:00
Hauke Mehrtens	e083c7926b	brcm47xx: create image for Netgear WNDR3400 V1 ... SVN-Revision: 35323	2013-01-26 20:34:38 +00:00
Hauke Mehrtens	05623aebef	brcm47xx: add initial board detection code ... SVN-Revision: 35322	2013-01-26 20:34:00 +00:00
Hauke Mehrtens	a83d7bb109	brcm47xx: add gpio to irq function again ... SVN-Revision: 35321	2013-01-26 20:33:23 +00:00
Felix Fietkau	8933b918cd	kernel: use -ffunction-sections, -fdata-sections and --gc-sections on mips ... in combination with kernel symbol export stripping this significantly reduces the kernel image size SVN-Revision: 35320	2013-01-26 16:26:13 +00:00
Gabor Juhos	15be1c9ee7	kernel: update linux 3.7 to 3.7.4 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35318	2013-01-24 17:08:37 +00:00
Florian Fainelli	680f460861	kernel: refresh 3.8 patches ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35317	2013-01-24 17:04:52 +00:00
Florian Fainelli	9781461a3d	mvebu: update to 3.8-rc4 ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35316	2013-01-24 17:04:46 +00:00
Hauke Mehrtens	4a69e20a10	kernel: add missing config options for 3.8 ... SVN-Revision: 35315	2013-01-24 14:48:15 +00:00
Hauke Mehrtens	76c12ff797	brcm47xx: change generic profiles ... The default profile now contains Ethernet drivers for all the types found on supported boards. There are other profiles for each Ethernet driver. SVN-Revision: 35314	2013-01-24 14:38:10 +00:00
Felix Fietkau	b60fc82ce5	kernel: remove the cisco sip phone patch for 3.7 and 3.8 as well ... SVN-Revision: 35310	2013-01-23 16:31:38 +00:00
Felix Fietkau	8ce8960959	ar71xx: sync kernel sizes where possible to fix images for some devices (#12874) ... SVN-Revision: 35309	2013-01-23 16:29:25 +00:00
Jonas Gorski	8411e5c06e	bcm63xx: switch to b53 and swconfig ... Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307	2013-01-23 10:12:40 +00:00
Jonas Gorski	17d51121a6	bcm63xx: expose the internal switch to b53 ... Allow b53 access to the internal switch of BCM6328, BCM6362 and BCM6368. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35306	2013-01-23 10:12:37 +00:00
Jonas Gorski	bb0118c66f	generic: add b53 swconfig switch driver ... Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports switches connected through MDIO, SPI or memory mapped registers, and supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch chips. Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35305	2013-01-23 10:12:33 +00:00
Jonas Gorski	3e998d9cf9	bcm63xx: move bcm63xx-spi into the kernel ... The SPI driver is needed for supporting to boot from SPI flash on BCM6358 and BCM6368, and for SPI connected switches. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35304	2013-01-23 10:12:13 +00:00
Felix Fietkau	46e4246d61	kernel: remove 340-module_alloc_size_check.patch from linux 3.8, it is not necessary anymore ... SVN-Revision: 35248	2013-01-19 19:14:37 +00:00
Gabor Juhos	ed6d399f8d	ramips: add profile and build image for the Tenda 3G300M ... Factory image should be used to flash from original firmware. [juhosg: use the GENERIC_4M template] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35246	2013-01-19 17:05:07 +00:00
Gabor Juhos	9891603eb5	ramips: add user-space support for the Tenda 3G300M ... Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35245	2013-01-19 17:05:06 +00:00
Gabor Juhos	7eff5d2df0	ramips: add kernel support for the Tenda 3G300M ... Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons and seven leds. Factory image should be used to flash from original firmware. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35244	2013-01-19 17:05:03 +00:00
Gabor Juhos	f7a943694f	ramips: use MkImage for Hauppauge Broadway, Netcore NW718 and Tenda W306R V2.0 ... These targets need custom image names specified in the uImage header. MkImage accepts an optional 4th argument to do exactly that. Reuse the facility to generate factory images. Compile-tested, the generated files inspected with "file" utility. [juhosg: - keep the factory.bin images to avoid users confusion, - use GENERIC_4M template for the W306R V2.0 - update commit log] Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35243	2013-01-19 15:36:13 +00:00
Gabor Juhos	6aebe6a65d	ramips: allow to override image name/suffix in GENERIC_{4,8}M macros ... Sysupgrade/KRuImage and BuildFirmware/Generic macros are changed as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35242	2013-01-19 15:36:11 +00:00
Gabor Juhos	60dde219d4	ramips: do not stop the build if some targets fail ... This becomes crucial when you are using a generic profile to build an image larger than 4M, e.g. for w502u. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35238	2013-01-19 08:51:45 +00:00
Jonas Gorski	c3eeff807f	generic: rtl8366_smi: only assign pvid if no pvid was set yet ... Only assign a pvid if the current pvid is 0. Fixes using mixed tagged and untagged traffic on a port and the untagged vlan isn't the last one of which the port is a member. Tested on RTL8366S and RTL8367R. Fixes #8501. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35227	2013-01-18 15:19:11 +00:00
Jo-Philipp Wich	3a2cccda2e	all targets: use numerically prefixed uci-defaults file names to better control order of execution ... SVN-Revision: 35217	2013-01-18 12:42:53 +00:00
Gabor Juhos	0de21d9747	kernel: update linux 3.7 to 3.7.3 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35216	2013-01-18 11:44:42 +00:00
Florian Fainelli	c8215775f3	mvebu: enable PCI in kernel configuration ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35214	2013-01-17 22:29:26 +00:00
Florian Fainelli	5e45a4344c	mvebu: enable PCIe on Marvell Armada 370 Reference Design ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35213	2013-01-17 22:29:22 +00:00
Florian Fainelli	cf9343ac86	mvebu: enable USB on Armada 370 Reference Design ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35212	2013-01-17 22:29:18 +00:00
Florian Fainelli	7e1e7063c2	mvebu: add preliminary support for PCI express ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35211	2013-01-17 22:29:13 +00:00
Florian Fainelli	29c21b973b	mvebu: refresh patches ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35210	2013-01-17 22:28:58 +00:00
Florian Fainelli	28acc6588d	kernel: refresh 3.8 patches ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35209	2013-01-17 22:28:53 +00:00
Florian Fainelli	a286a55c6f	mvebu: add board detection scripts ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35208	2013-01-17 22:28:48 +00:00
Florian Fainelli	f7858466e2	mvebu: enable /proc/devicetree usage ... This is going to be used for proper user-space board identification (ala mcs814x). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35207	2013-01-17 22:28:37 +00:00
Florian Fainelli	15b4681e3e	mvebu: add default profile ... Such that relevant kernel modules are selected (USB, I2C, SATA, RTC, SDIO) Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35206	2013-01-17 22:28:33 +00:00
Jo-Philipp Wich	7399df1d69	x86: explicitely pass staging directory to grub-mkimage instead of relying on build time defaults (#12821) ... SVN-Revision: 35200	2013-01-17 15:46:26 +00:00
Gabor Juhos	57f7408b8a	generic: add EHCI|OHCI platform driver fix to 3.[36] ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35194	2013-01-17 13:54:14 +00:00
Felix Fietkau	576aa2af0c	ramips: enable BR6425N in kernel config ... Though originally contained in the patch applied in r35020, the move to 3.7 in r34845 lost the kernel .config option. Reintroduce it to config-3.7. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 35191	2013-01-17 09:39:44 +00:00
Florian Fainelli	05466923b8	mvebu: add support for EHCI controller ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35181	2013-01-15 19:55:50 +00:00
Florian Fainelli	c53a347034	mvebu: add support for the Marvell Armada 370 Reference Design board ... Keep the patches in sync with the upstream developments. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35179	2013-01-15 19:55:40 +00:00
Florian Fainelli	58f8c5d87a	mvebu: enable SMP with SMP on UP enabled ... The same kernel works ok for both Armada 370 (UP) and Armada XP (SMP) Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35178	2013-01-15 19:55:31 +00:00
Florian Fainelli	fa1afc1fa9	mvebu: add support for RTC ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35176	2013-01-15 19:55:19 +00:00
Felix Fietkau	b3b04e9fb1	kernel: port 203-kallsyms_uncompressed.patch and 305-mips_module_reloc.patch to 3.8 ... SVN-Revision: 35162	2013-01-14 18:55:36 +00:00
Gabor Juhos	78dc69e1d4	generic: remove EHCI platform driver fix from 3.8 ... It is not needed on 3.8. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35160	2013-01-14 17:53:55 +00:00
Gabor Juhos	b035c594ae	generic: add EHCI|OHCI platform driver fix from the cns21xx target ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35159	2013-01-14 17:47:23 +00:00
Florian Fainelli	1e103b2ecc	target: enable XZ BCJ decompressor code after r35097 ... Required to actually be able to mount squashfs xz compressed filesystems. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35156	2013-01-14 16:34:25 +00:00
Felix Fietkau	e0e3509b5c	kernel: add a config option for keeping the kallsyms table uncompressed, saving ~9kb kernel size after lzma on ar71xx ... SVN-Revision: 35154	2013-01-14 16:08:18 +00:00
Felix Fietkau	1474359bd3	ar71xx: fix unaligned access in cls_u32 ... SVN-Revision: 35132	2013-01-13 16:48:23 +00:00
Felix Fietkau	e67b6ee395	ar71xx: fix unaligned access in a few more places ... SVN-Revision: 35130	2013-01-13 15:37:58 +00:00
Felix Fietkau	b5bcbdfbb5	ar71xx: improve unaligned access patches, add a net_hdr_word() macro which assumes 2-byte aligned access and generates better code than {get,put}_unaligned_cpu32 ... SVN-Revision: 35129	2013-01-13 14:54:39 +00:00
Felix Fietkau	53e0ba49b9	ar71xx: avoid __packed define in the unaligned access hack patch, make the ipv6 address struct also 2-byte-aligned/packed ... SVN-Revision: 35127	2013-01-13 13:06:09 +00:00
Felix Fietkau	5d55cece6e	kernel: add back the mips module relocation patch ... SVN-Revision: 35126	2013-01-13 12:23:42 +00:00
Felix Fietkau	764520975c	ar71xx: add more cpu feature overrides, slightly reduces kernel size ... SVN-Revision: 35125	2013-01-13 11:33:48 +00:00
Felix Fietkau	310724c14d	ar71xx: extend the unaligned access hacks to a few more places that showed up in the new kernel ... SVN-Revision: 35124	2013-01-13 11:33:44 +00:00
Hauke Mehrtens	2bf03f971d	brcm47xx: BCMA - Update default IRQ assignment per upstream change ... Update the default IRQ assignment for unrecognized devices per the upstream change. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 35121	2013-01-12 15:00:01 +00:00
Gabor Juhos	5d1ecfc26d	refresh kernel configs with kconfig.pl ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35119	2013-01-12 12:29:55 +00:00
Gabor Juhos	ef75e6c71a	malta: remove 3.6 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35118	2013-01-12 12:29:53 +00:00
Gabor Juhos	3d057de4db	malta: build lzma and gzip compressed uImages ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35117	2013-01-12 12:29:52 +00:00
Gabor Juhos	df8a8f2515	adm5120: remove 3.6 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35116	2013-01-12 12:25:42 +00:00
Gabor Juhos	d472567997	adm5120: switch to 3.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35115	2013-01-12 12:25:40 +00:00
Gabor Juhos	eb2188c0e2	ar71xx: remove 3.6 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35114	2013-01-12 12:25:38 +00:00
Gabor Juhos	fe86bc9370	ar71xx: switch to 3.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35113	2013-01-12 12:25:36 +00:00
Gabor Juhos	ca882f230d	mpc83xx: remove 3.6 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35112	2013-01-12 12:25:34 +00:00
Gabor Juhos	eba037cd1f	mpc83xx: switch to 3.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35111	2013-01-12 12:25:32 +00:00
Gabor Juhos	ff2ce330a5	ramips: remove 3.6 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35110	2013-01-12 12:25:30 +00:00
Gabor Juhos	d53f8c3ded	ramips: switch to 3.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35109	2013-01-12 12:25:28 +00:00
Gabor Juhos	f8f009ca43	rb532: remove 3.6 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35108	2013-01-12 12:25:26 +00:00
Gabor Juhos	cd71dcdab7	rb532: switch to 3.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35107	2013-01-12 12:25:24 +00:00
Gabor Juhos	7098354885	ppc44x: remove 3.6 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35106	2013-01-12 12:25:21 +00:00
Gabor Juhos	83fccacec2	ppc44x: switch to 3.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35105	2013-01-12 12:25:20 +00:00
Gabor Juhos	9d3bae8f0e	ppc40x: remove 3.6 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35104	2013-01-12 12:25:18 +00:00
Gabor Juhos	06fea75afb	ppc40x: switch to 3.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35103	2013-01-12 12:25:16 +00:00
Gabor Juhos	a51f602494	cns21xx: remove 3.6 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35102	2013-01-12 12:25:14 +00:00
Gabor Juhos	bdc6ec4974	cns21xx: switch to 3.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35101	2013-01-12 12:25:12 +00:00
Gabor Juhos	c19c30cefd	kernel: update linux 3.7 to 3.7.2 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35100	2013-01-12 11:43:08 +00:00
Florian Fainelli	ecf230710f	mvebu: update to 3.8-rc3 ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35086	2013-01-10 17:20:25 +00:00
Hauke Mehrtens	548cb59826	brcm47xx: update bgmac driver to the version in mainline kernel ... SVN-Revision: 35083	2013-01-10 14:22:19 +00:00
Hauke Mehrtens	885eea1842	kernel: update bcma and ssb to master-2013-01-09 from wireless-testing ... SVN-Revision: 35080	2013-01-10 14:05:18 +00:00
Imre Kaloz	a2950fabd4	clean up PCI bus topology ... This makes the PCI bus topology more standard for devices behind a bridge Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 35079	2013-01-10 13:25:12 +00:00
Imre Kaloz	b63b970866	clean up PCI bus topology ... This makes the PCI bus topology more standard for devices behind a bridge Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 35078	2013-01-10 13:23:33 +00:00
John Crispin	64910f4490	fixes USB reset on ARV7518 ... SVN-Revision: 35077	2013-01-10 06:44:58 +00:00
John Crispin	4834d09a3f	fixes none-pci build ... SVN-Revision: 35062	2013-01-09 09:04:09 +00:00
Florian Fainelli	25475a095e	mvebu: add inital support for Marvell Armada XP/370 SoCs ... This brings in the initial support for the Marvell Armada XP/370 SoCs. Successfully tested on RD-A370-A1 and DB-MV784MP-GP boards the following interfaces: - Ethernet - SDIO - GPIOs - SATA Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35058	2013-01-08 22:20:16 +00:00
Florian Fainelli	97acd10458	add support for 3.8 kernel ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35057	2013-01-08 22:20:11 +00:00
Florian Fainelli	9b601b79d0	add support for 3.8 kernel ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35056	2013-01-08 22:20:06 +00:00
Florian Fainelli	8dbed04ec9	kernel: add support for 3.8-rc2 ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35055	2013-01-08 22:19:31 +00:00
Hauke Mehrtens	7b0af8193b	brcm47xx: BGMAC Driver corrections ... 1) Fix what appears to be a logic error in bgmac_phy_advertise. 2) Fix bgmac_ioctl to use passed phy_id; needed for switch-robo interface w/ the driver to work correctly. I still have the issue with the interface always being HD when the speed/duplex is set manually (e.g., echo "100FD" > /proc/switch/eth0/port/N/media). Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 35052	2013-01-07 22:51:39 +00:00
Florian Fainelli	4ec57bdc06	update to 3.7 ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35045	2013-01-07 18:16:36 +00:00
Gabor Juhos	ba4de984b9	ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards ... The PHY_SWAP and PHY_ADDR_SWAP bits are initialized differently by different versions of the bootloader. This leads to broken ethernet connection with OpenWrt on some boards. Turn both SWAP bits OFF on these boards to make it consistent regardless of the bootloader used. Based on a patch by Michel Stempin <michel.stempin@wanadoo.fr>. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35037	2013-01-07 14:30:37 +00:00
Gabor Juhos	251e4608b0	ar71xx: add missing Makefile entry to the 74HC153 GPIO patch ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35035	2013-01-07 14:14:41 +00:00
Felix Fietkau	5154270694	orion: debloat the kernel some more ... SVN-Revision: 35023	2013-01-06 15:09:47 +00:00
Felix Fietkau	75657ff8a9	kernel: add missing config symbol ... SVN-Revision: 35021	2013-01-06 15:09:39 +00:00
John Crispin	f2f9332350	adds support for Edimax BR-6524N ... fixes #12754 Signed-off-by: <rq@akl.lt> SVN-Revision: 35020	2013-01-06 11:11:42 +00:00
John Crispin	d5d2e8b4db	missing underscore in 3.3 regmap patch ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 35018	2013-01-06 10:01:53 +00:00
Felix Fietkau	2e8409cce3	kernel: port the regmap fix to 3.6 (#12749), refresh patches for other versions ... SVN-Revision: 35016	2013-01-05 13:33:44 +00:00
John Crispin	e6aac19237	fix regmap debloat patch ... SVN-Revision: 35015	2013-01-05 00:20:05 +00:00
Jonas Gorski	e952eaa112	bcm63xx: Add Huawei HG556a support ... Add Huawei EchoLife HG556a support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo@openwrt.org: added some code style fixes] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35011	2013-01-04 14:47:57 +00:00
Jonas Gorski	0e58173fa5	bcm63xx: Fix caldata partition mtd patch ... Allow bcm63xxpart to receive a caldata offset if calibration data is contained in flash. Tested-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 35010	2013-01-04 14:47:50 +00:00
Jonas Gorski	10fc07daac	bcm63xx: remove 3.3 support ... 3.6 is tested enough to be considered stable. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35009	2013-01-04 14:47:43 +00:00
Felix Fietkau	96f3911981	kernel: move regmap bloat out of the kernel image if it is only being used in modules ... SVN-Revision: 34999	2013-01-03 18:39:50 +00:00
Hauke Mehrtens	a105eea1a1	brcm47xx: various fixes and code cleanups for irq code ... This is based on a patch send by Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34997	2013-01-03 16:56:54 +00:00
Hauke Mehrtens	4443997fd8	brcm47xx: add bgmac driver ... This Ethernet driver is in early development stage and still has some problems. This was working on my bcm4716 based device. Thanks to Rafał Miłecki <zajec5@gmail.com> for writing this driver. SVN-Revision: 34995	2013-01-03 02:05:22 +00:00
Hauke Mehrtens	8f6bdcffa1	brcm47xx: build b44 as a module ... SVN-Revision: 34994	2013-01-03 02:00:25 +00:00
Hauke Mehrtens	22d62d311a	brcm47xx: run ifup before starting the switch ... In addition check_module is not needed, nobody checks the return value. SVN-Revision: 34993	2013-01-03 01:59:43 +00:00
Hauke Mehrtens	97b2b601c7	brcm47xx: BCMA - IRQ Update - Fix IRQ Flag for I2S Core ... Adjust the IRQ Flag value from 8 to 7 for I2S Core for BCM4716 and BCM4748 (per the Broadcom SDK). IRQ Flag values greater than 7 are ignored when setting the interrupt masks. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34990	2013-01-03 01:56:13 +00:00
Hauke Mehrtens	f74e847301	brcm47xx: improve IRQ handling for bcma based devices ... This was party inspirited by patches send by Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34989	2013-01-03 01:55:34 +00:00
Hauke Mehrtens	25afeba608	brcm47xx: add a new version of the nvram rewrite patch ... This is the version like it was send for mainline inclusion. SVN-Revision: 34988	2013-01-03 01:53:30 +00:00
Hauke Mehrtens	edc7ab525f	brcm47xx: move patches already in the mainline kernel to the front ... SVN-Revision: 34987	2013-01-03 01:51:31 +00:00
Hauke Mehrtens	76c767f122	brcm47xx: remove support for kernel version 3.3 ... SVN-Revision: 34986	2013-01-03 01:48:43 +00:00
Jo-Philipp Wich	7a73c2f91f	generic: add some missing kernel config symbols spotted on x86 ... SVN-Revision: 34981	2013-01-02 19:10:24 +00:00
Felix Fietkau	741f6ba7ef	x86: fix typo in alix2/net5501 default packages ... SVN-Revision: 34972	2013-01-02 16:09:23 +00:00
John Crispin	569bbe4970	rt5350 switch support fix ... RT5350 frame engine need reset frame engine and embedded switch together. Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 34969	2013-01-02 11:28:21 +00:00
Gabor Juhos	373b0b9ad1	generic: fix UBIFS build error if XZ compression is disabled ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34959	2013-01-02 08:53:07 +00:00
Gabor Juhos	d91117459c	adm5120: add support for 3.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34954	2013-01-01 13:15:49 +00:00
Gabor Juhos	f0520f1714	adm5120: nuke 3.3 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34953	2013-01-01 13:15:44 +00:00
Gabor Juhos	b4315df8e1	adm5120: switch to 3.6 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34952	2013-01-01 13:15:41 +00:00
Gabor Juhos	edd36342e5	adm5120: add support for 3.6 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34951	2013-01-01 13:15:36 +00:00
Gabor Juhos	92cd48e9ea	adm5120: remove NAND_NO_AUTOINCR flag from rb1xx.c ... Also add a compatibility patch for 3.3. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34950	2013-01-01 13:15:30 +00:00
Gabor Juhos	03e09078dc	adm5120: use mtd_read helper in trxsplit.c ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34949	2013-01-01 13:15:20 +00:00
Gabor Juhos	e1b13e15b2	adm5120: don't include asm/system.h in adm5120-hcd.c ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34948	2013-01-01 13:15:16 +00:00
Gabor Juhos	cbe5d664e1	generic: add missing symbol for 3.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34947	2013-01-01 13:15:11 +00:00
Gabor Juhos	e1965a1d1a	ar71xx: register the NAND flash controller device on the AP135/136 boards ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34946	2013-01-01 13:10:41 +00:00
Gabor Juhos	66efec6783	ar71xx: allow to register the NAND flash controller on the QCA955x ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34945	2013-01-01 13:10:36 +00:00
Gabor Juhos	2c77e5d7b3	ar71xxx: allow to select ATH79_DEV_NFC for QCA955x ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34944	2013-01-01 13:10:34 +00:00
Gabor Juhos	d8446d65fe	ar71xxx: allow to build the ar934x_nfc driver for QCA955x ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34943	2013-01-01 13:10:29 +00:00
Gabor Juhos	93c322cacc	ar71xx: fix NAND controller base for QCA955x SoCs ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34942	2013-01-01 13:10:26 +00:00
Gabor Juhos	b57cc9a538	ar71xx: fold AP135 patch ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34941	2013-01-01 13:10:22 +00:00
John Crispin	624eb36fff	adds missing symbol ... SVN-Revision: 34939	2012-12-30 21:31:10 +00:00
John Crispin	ce57efa3ea	fixes usb port on arv 4518 ... SVN-Revision: 34935	2012-12-30 12:38:40 +00:00
Gabor Juhos	fb07876f25	ramips: rt305x: fix garbled name in mach-mzk-w300nh2.c ... Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34934	2012-12-30 08:23:48 +00:00
Gabor Juhos	6708d68c24	ramips: build firmware image for the Planex MZK-W300NH2 Router ... Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3077/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34927	2012-12-29 17:50:40 +00:00
Gabor Juhos	8b1ac2ae37	ramips: add user-space support for the Planex MZK-W300NH2 Router ... Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3077/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34926	2012-12-29 17:50:38 +00:00
Gabor Juhos	d6d06aceb0	ramips: rt305x: add kernel support for the Planex MZK-W300NH2 Router ... This is a Japanese market router, for details check http://www.planex.co.jp/product/router/mzk-w300nh2/. It has only 16MB RAM, but base OpenWRT install worked fine for days without issues. Even an image with built-in Luci worked, but don't expect smooth experience, due to the lack of RAM. Wifi was not extensively tested, but seems it is working. GPIO LEDs & buttons, factory flash image and switch config are confirmed working. Tested against revision 34882 + this patch. [juhosg: move user-space support and image generation changes into separate patches] Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3077/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34925	2012-12-29 17:50:35 +00:00
Gabor Juhos	76537041eb	ramips: build image for Airlive AIR3GII ... Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/2913/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34924	2012-12-29 17:50:34 +00:00
Gabor Juhos	3aad9b4c9b	ramips: add user-space support for Airlive AIR3GII ... Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/2913/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34923	2012-12-29 17:50:32 +00:00
Gabor Juhos	3fcb8bb0dd	ramips: rt305x: add kernel support for AirLive AIR3GII ... AirLive AIR3GII is Ralink RT5350F based device with 100Mbps switch, USB port, 4MB flash and 32MB ram. Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade Does not work: wifi (chip RT5350), reset button [ 13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected. [ 13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device. Other problem: LAN leds is reverse (lights when not cable connected and vice versa) [juhosg: move user-space support and image generation changes into separate patches] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/2913/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34922	2012-12-29 17:50:28 +00:00
Gabor Juhos	87271e9f28	ar71xx: add support for 3.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34920	2012-12-29 16:02:31 +00:00
Gabor Juhos	a3a6e0f039	ar71xx: Build the AP135 images ... Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34919	2012-12-29 16:02:28 +00:00
Gabor Juhos	dddf05bde2	ar71xx: Add userspace support for AP135 ... Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34918	2012-12-29 16:02:27 +00:00
Gabor Juhos	1a379c5112	ar71xx: Add support for AP135 ... Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34917	2012-12-29 16:02:24 +00:00
Gabor Juhos	c6580f64b8	ar71xx: use a backported patch to fix AR933x UART baud rate calculation ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34915	2012-12-29 13:52:38 +00:00
Felix Fietkau	348dc70c8c	ar71xx: change the unaligned access hack to assume an alignment of 2 bytes, slightly improves performance and code size ... SVN-Revision: 34912	2012-12-28 21:30:24 +00:00
Felix Fietkau	41a039f464	mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration ... SVN-Revision: 34909	2012-12-28 19:17:19 +00:00
Felix Fietkau	9bb8b9fadb	kernel: remove the cisco SIP NAT patch, at least on 3.6 it crashes ... SVN-Revision: 34901	2012-12-27 22:59:51 +00:00
Hauke Mehrtens	981b7410f8	brcm47xx: bcma: correct M25P32 serial flash ID ... Thank you Rafał Miłecki. SVN-Revision: 34900	2012-12-27 19:18:40 +00:00
Gabor Juhos	386c37b4c2	mpc83xx: add support for 3.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34892	2012-12-26 10:40:54 +00:00
Gabor Juhos	f67a7a479e	mpc83xx: nuke 3.3 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34891	2012-12-26 10:40:51 +00:00
Gabor Juhos	36af140fe4	mpc83xx: switch to 3.6.11 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34890	2012-12-26 10:40:50 +00:00
Gabor Juhos	c4c8307ca1	mpc83xx: add support for 3.6 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34889	2012-12-26 10:40:48 +00:00
Gabor Juhos	e537b8a093	mpc83xx: create package for the rbppc_cf module ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34888	2012-12-26 10:40:47 +00:00
Gabor Juhos	fff75fe5b6	generic: more missing symbols for 3.{6,7} ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34887	2012-12-26 10:40:41 +00:00
Gabor Juhos	f5b1cba606	ar71xx: build image for the AP136-020 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34886	2012-12-26 09:50:37 +00:00
Gabor Juhos	f3f05d86fe	ar71xx: add user-space support for AP136-020 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34885	2012-12-26 09:50:36 +00:00
Gabor Juhos	ed1889db33	ar71xx: add kernel support for the AP136-020 board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34884	2012-12-26 09:50:34 +00:00
Gabor Juhos	c887a7fe4e	ar71xx: rename AP136 to AP136-010 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34883	2012-12-26 09:50:31 +00:00
Gabor Juhos	f8b4dfd172	ar71xx: dynamically set AR8327's PAD configuration on AP136 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34882	2012-12-25 18:45:32 +00:00
Gabor Juhos	d4b4c7d102	generic: ar8216: add sgmii_delay_en field to ar8327_platform_data ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34881	2012-12-25 18:45:31 +00:00
Gabor Juhos	1dc2b6e8fa	ar71xx: ag71xx: show PHY interface mode in dmesg ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34880	2012-12-25 18:45:29 +00:00
Gabor Juhos	69da894432	ramips: fix ASUS WL-330N3G MAC address ... The ASUS WL-330N and WL-330N3G has the MAC address stored at offset 4, not 40. This is verified by reading original ASUS firmware GPL_WL-330N3G_source.1028/user/rc/common_ex.c and GPL_WL-330N_source.1021/user/rc/common_ex.c. Tested on WL-330N3G, it now gets the same MAC as is printed on the label on the router. Signed-off-by: Jan Kardell <jan.kardell@arkub.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34877	2012-12-24 06:52:41 +00:00
Gabor Juhos	c5a36f13f0	ramips: fix wifi EEPROM extraction on DIR-615-Dx models ... Patch from #12636. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34876	2012-12-24 06:52:38 +00:00
Imre Kaloz	2c05915b24	add nol2x0 cmdline to disable l2x0 cache ... L2 cache via L2X0 cache controller available on some ARM boards can provide a performance boost in some situations but decrease performance in others. This adds a kernel cmdline to disable L2X0 for cns3xxx based boards. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 34874	2012-12-23 18:53:38 +00:00
Gabor Juhos	c3cb63661f	generic: ar8216: don't use 0 as default VID on AR8327 ... VID0 is reserved for priority-tagged packets. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34862	2012-12-22 18:30:04 +00:00
Gabor Juhos	fa9d06c7f4	generic: more missing symbols for 3.{6,7} ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34861	2012-12-22 17:22:41 +00:00
Gabor Juhos	8105c6badd	ramips: unify eeprom file name for the built-in wireless MAC ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34860	2012-12-22 16:09:03 +00:00
Gabor Juhos	c81b4475c9	ramips: rt3883: fix build error ... The cpuport_cfg field has been renamed to port0_cfg. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34859	2012-12-22 13:50:47 +00:00
Gabor Juhos	64d31e6c6b	ar71xx: register the second ethernet interface on the AP136 ... Also fix the default network configuration according to the new setup. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34854	2012-12-22 12:12:50 +00:00
Gabor Juhos	5dec87afef	ar71xx: fix ethernet device registration for QCA9558 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34853	2012-12-22 12:12:48 +00:00
Gabor Juhos	84a7051cef	ar71xx: rename QCA9558 ETH_CFG bit defines ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34852	2012-12-22 12:12:46 +00:00
Gabor Juhos	4085a5773d	ar71xx: fixup allowed PHY interface types for QCA9558 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34851	2012-12-22 12:12:44 +00:00
Gabor Juhos	f01a786825	ar71xx: don't assign any MII bus device on QCA9558 by default ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34850	2012-12-22 12:12:43 +00:00
Gabor Juhos	9edcd9d3a3	ar71xx: ag71xx: fix mii_bus_dev sanity check ... The mii_bus device is not required if phy_mask is zero. The driver will use a fixed connection if it is not specified. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34849	2012-12-22 12:12:41 +00:00
Gabor Juhos	ad0f03d250	ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_dev ... Trying to do that causes a NULL pointer dereference: CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 801d170c, ra == 801d18d4 Oops[#1]: Cpu 0 $ 0 : 00000000 00000000 00000000 00000001 $ 4 : 00000000 802e6390 ffff8f45 00000001 $ 8 : 804b5360 ffffff80 802f93bc 00000000 $12 : 802f93e8 00000000 00000000 00000000 $16 : 8381aba0 8381aba0 00000000 00000000 $20 : 8295eff0 00000032 80000000 004101b8 $24 : 00000000 777265b0 $28 : 82936000 82937cf0 00420000 801d18d4 Hi : 00000000 Lo : 00000001 epc : 801d170c ar7240sw_reset+0x1c/0x19c Tainted: G O ra : 801d18d4 ag71xx_ar7240_start+0x28/0xc0 Status: 1100fc03 KERNEL EXL IE Cause : 00800008 BadVA : 00000000 PrId : 00019750 (MIPS 74Kc) Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tab les ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) c ompat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button _hotplug(O) Process netifd (pid: 677, threadinfo=82936000, task=82cbe140, tls=77803750) Stack : ffffffff 80087900 00000001 82937d74 8381aba0 8381aba0 00000000 00000000 8295eff0 801d18d4 8295eff0 801fa4a4 00420000 80092158 00000002 8381aba0 8381a800 00000000 00000080 801cf900 8027e720 00000000 00000000 8009223c 8381a800 8381a82c 8027e720 00000000 00000000 7f9d14f0 00420000 801ec08c 8381a800 801ebfb0 33000000 82937e30 00000001 8381a800 00001003 801ec348 ... Call Trace: [<801d170c>] ar7240sw_reset+0x1c/0x19c [<801d18d4>] ag71xx_ar7240_start+0x28/0xc0 [<801cf900>] ag71xx_open+0x1d0/0x258 [<801ec08c>] __dev_open+0xcc/0x130 [<801ec348>] __dev_change_flags+0xc0/0x160 [<801ec490>] dev_change_flags+0x20/0x6c [<801ec5c8>] dev_ifsioc+0xec/0x348 [<801ecdb8>] dev_ioctl+0x594/0x67c [<800ec00c>] do_vfs_ioctl+0x598/0x5ec [<800ec0b0>] sys_ioctl+0x50/0x90 [<8006a3c4>] stack_done+0x20/0x40 Code: afbf0024 afb40020 afb10014 <8c910000> 00809021 24100104 24130704 8e440000 02002821 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34848	2012-12-22 12:12:40 +00:00
Gabor Juhos	3931c9524c	generic: ar8316: allow to configure port 6 via platform data on AR8327 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34847	2012-12-22 12:12:37 +00:00
Gabor Juhos	a0b31f97bb	generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34846	2012-12-22 12:12:35 +00:00
Gabor Juhos	b44cdcde8e	ramips: add support for 3.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34845	2012-12-22 12:11:13 +00:00
Gabor Juhos	b81667cb23	ramips: convert to use {e,o}hci-platform driver ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34843	2012-12-22 12:11:08 +00:00
Gabor Juhos	c0e1a6f342	generic/3.6: add platform specific power callbacks to {e,o}hci_platform drivers ... Backport of upstream commits: 86e4cb35f2260374df4139c2352afe7fe247cb60 usb: host: ehci-platform: BUG_ON() to WARN_ON() on probe b6dd245c4594482d46507a0bfd100439be367952 usb: host: ohci-platform: BUG_ON() to WARN_ON() on probe 04216bedafb1b3992a6c2b7f1518281d2ba5fc7b usb: host: ehci-platform: add platform specific power callback e4d37aeb373a5edceecc1dadc76fabbe8bc18e44 usb: host: ohci-platform: addplatform specific power callback Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34842	2012-12-22 12:11:06 +00:00
John Crispin	efe3225e2b	ar9 did not load atm driver properly ... SVN-Revision: 34840	2012-12-22 10:16:52 +00:00
John Crispin	379cd6e25e	dont use input layer for gpio buttons ... SVN-Revision: 34839	2012-12-21 20:04:20 +00:00
John Crispin	90a3761b0b	default switch setup for WBMR ... SVN-Revision: 34838	2012-12-21 20:04:12 +00:00
John Crispin	ae0b9ff1ce	Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143) ... Tested only on the wbmr-hp-g300h, could affect/break other devices. Signed-off-by: Sebastian Mayr <sebastian.mayr@student.uibk.ac.at> SVN-Revision: 34837	2012-12-21 20:04:04 +00:00
John Crispin	9818a1f00b	adds script to set wps info on boards with a wps button ... SVN-Revision: 34836	2012-12-21 20:03:59 +00:00
John Crispin	3134205dfd	minor tweaks to WBMR image ... SVN-Revision: 34835	2012-12-21 20:03:54 +00:00
John Crispin	f4b2439554	add missing PHY_BASIC_FEATURES to 100mbit phys ... SVN-Revision: 34826	2012-12-21 14:41:35 +00:00
John Crispin	861bf6af49	fix typo inside fritz3370 devicetree file ... SVN-Revision: 34825	2012-12-21 14:41:30 +00:00
John Crispin	54c096527a	more devicetree fixes ... SVN-Revision: 34824	2012-12-21 13:47:55 +00:00
John Crispin	59cc6d9ddd	improve button handling ... SVN-Revision: 34823	2012-12-21 13:47:50 +00:00
John Crispin	7ce4c81647	add phy-reset gpio handling to xrx200-net ... SVN-Revision: 34822	2012-12-21 13:47:44 +00:00
John Crispin	42d668174e	add more lantiq phy ids based on daniels uboot code ... SVN-Revision: 34821	2012-12-21 13:47:40 +00:00
John Crispin	16c5946f8b	refresh patch and install v1.1 gphy blobs ... SVN-Revision: 34820	2012-12-21 13:47:35 +00:00
John Crispin	123343d424	make to rtl8366_smi of binding use gpio_is_valid ... SVN-Revision: 34816	2012-12-21 13:47:14 +00:00
Gabor Juhos	840d0d246c	kernel: add solos-pci update for 3.3 ... Same patches that I just merged for 3.6 and 3.7, except with one additional fix that went into v3.4 that needed to be included. Submitted more for the benefit of the AA branch than for trunk. [juhosg: refresh the patch with quilt] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34813	2012-12-21 10:38:33 +00:00
Gabor Juhos	04ce7e213f	rb532: add support for 3.7 ... Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34812	2012-12-20 19:25:43 +00:00
Gabor Juhos	e1b5eeeaa4	ramips: Add USB support for DAP-1350 platform. ... It seems to work as intended, but only lightly tested. Patch-by: Bryan Steele <brynet@gmail.com> SIgned-off-by: Gabor Juhos <juhsog@openwrt.org> SVN-Revision: 34811	2012-12-20 19:17:17 +00:00
Gabor Juhos	311d921e12	rb532: nuke 3.3 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34810	2012-12-20 19:09:03 +00:00
Gabor Juhos	befb29c7a3	rb532: switch to 3.6.11 ... Compile tested only. The target is broken anyway, so the kernel version does not matter too much. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34809	2012-12-20 19:09:01 +00:00
Gabor Juhos	dbcb4708fb	rb532: add support for 3.6 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34808	2012-12-20 19:09:00 +00:00
Gabor Juhos	5399d00ae6	ppc44x: add support for 3.7 ... Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34807	2012-12-20 18:11:22 +00:00
Gabor Juhos	2d6a41cf5d	kernel: add solos-pci patches from 3.8 for new hardware ... [juhosg: refresh patches with quilt, skip the patch for 3.3] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34806	2012-12-20 17:14:57 +00:00
Gabor Juhos	d21275a36b	linux: add missing symbols for 3.{6,7} ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34805	2012-12-20 17:14:56 +00:00
Gabor Juhos	a81fa11243	cns21xx: add support for 3.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34801	2012-12-20 14:51:17 +00:00
Gabor Juhos	1d7ba088e6	ppc40x: add support for 3.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34800	2012-12-20 14:51:16 +00:00
Gabor Juhos	708c8c3d0d	ppc40x: add missing NULL terminator to avoid boot panic on PPC40x ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34799	2012-12-20 14:37:39 +00:00
Gabor Juhos	e108cb91c0	ar71xx: rename fix-ar933x-reset patch ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34798	2012-12-20 14:13:16 +00:00
Gabor Juhos	5da1d7daa5	ppc40x/44x: disable SWIOTLB ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34797	2012-12-20 14:09:39 +00:00
John Crispin	1b0aaff246	adds a fix for ar8216 mii detection on etop driver ... SVN-Revision: 34795	2012-12-19 16:20:24 +00:00
Mirko Vogt	4d4b2d3ced	merge /lib/functions/boot.sh and /lib/functions.sh ... SVN-Revision: 34794	2012-12-19 16:07:53 +00:00
Mirko Vogt	e34a4e0c7b	Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh) ... SVN-Revision: 34793	2012-12-19 16:07:50 +00:00
Mirko Vogt	439a869090	Do not overload mount-call - trying to reduce confusion ... The behaviour of calling 'mount' differed depending on whether it called the busybox-mount, the mount of util-linux, the mount defined in /lib/functions.sh and /lib/functions/boot.sh /etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh, both re-defining 'mount'. SVN-Revision: 34792	2012-12-19 16:07:46 +00:00
John Crispin	687920ba3e	minor basefiles fixes ... SVN-Revision: 34790	2012-12-19 15:17:42 +00:00
John Crispin	e472671bde	fix gptu clocks ... SVN-Revision: 34789	2012-12-19 15:17:31 +00:00
John Crispin	5495ffbfdf	more board file fixes ... SVN-Revision: 34788	2012-12-19 15:17:11 +00:00
Gabor Juhos	c0515a5a8b	ppc44x: nuke 3.3 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34787	2012-12-19 09:45:43 +00:00
Gabor Juhos	aedd9433fa	ppc44x: switch to 3.6.11 ... Compile tested only. The target is broken anyway, so the kernel version does not matter too much. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34786	2012-12-19 09:45:42 +00:00
Gabor Juhos	982d3e3f7a	ppc44x: add support for 3.6 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34785	2012-12-19 09:45:40 +00:00
Gabor Juhos	5f82aa4d15	ar71xx: merge machine patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34783	2012-12-19 08:50:45 +00:00
Gabor Juhos	cf99770800	ar71xx: build image for the TL-MR3220 v2 ... Based on the following patch: http://patchwork.openwrt.org/patch/3043/ [juhosg: reorder MR3220 MultiProfile entry] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34782	2012-12-19 08:50:44 +00:00
Gabor Juhos	b1b7aa674e	ar71xx: add user-space support for the TL-MR3220 v2 ... Based on the following patch: http://patchwork.openwrt.org/patch/3043/ [juhosg: add uci-defaults/network support] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34780	2012-12-19 08:50:41 +00:00
Gabor Juhos	0767605d17	ar71xx: add kernel support for the TL-MR3220 v2 ... Based on the following patch: http://patchwork.openwrt.org/patch/3043/ [juhosg: - remove custom LED and button arrays - use separate machine specific patch - update Kconfig] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34779	2012-12-19 08:50:35 +00:00
John Crispin	4aa8272c8b	fix gptu patch - tapi should now load ... SVN-Revision: 34777	2012-12-18 20:12:57 +00:00
Gabor Juhos	c62586382a	ppc40x: nuke 3.3 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34776	2012-12-18 20:10:37 +00:00
Gabor Juhos	7d0cf4f7a0	ppc40x: switch to 3.6.11 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34775	2012-12-18 20:10:34 +00:00
Gabor Juhos	565cdf58b5	ppc40x: add support for 3.6 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34774	2012-12-18 20:10:31 +00:00
Gabor Juhos	2143de1a3d	generic: disable crashlog on ppc ... It causes panic on boot: [ 0.194287] __ioremap(): phys addr 0x1f00000 is RAM lr crashlog_init_fs [ 0.200902] Unable to handle kernel paging request for data at address 0x00000000 [ 0.208347] Faulting instruction address: 0xc026cb10 [ 0.213282] Oops: Kernel access of bad area, sig: 11 [#1] [ 0.218586] PowerPC 40x Platform [ 0.221783] Modules linked in: [ 0.224817] NIP: c026cb10 LR: c026cb10 CTR: c000c1b8 [ 0.229745] REGS: c1825ed0 TRAP: 0300 Not tainted (3.6.11) [ 0.235435] MSR: 00029030 <EE,ME,IR,DR> CR: 42004082 XER: 00000000 [ 0.241745] DEAR: 00000000, ESR: 00000000 [ 0.245724] TASK = c181e000[1] 'swapper' THREAD: c1824000 GPR00: c026cb10 c1825f80 c181e000 00000000 0000004b 0000004b c029a4dd 6f675f69 GPR08: 6e69745f c0290440 00000000 00000000 22004084 00000000 01ffc400 004011f8 GPR16: 00000001 ffffffff 00000000 007fff00 01ff6120 01f94298 01fff258 c02631b8 GPR24: c02604bc 00000019 c02a0000 c02a0000 c027c644 00000000 c02c0000 c02bd388 [ 0.279089] NIP [c026cb10] crashlog_init_fs+0x30/0xe0 [ 0.284095] LR [c026cb10] crashlog_init_fs+0x30/0xe0 [ 0.289000] Call Trace: [ 0.291442] [c1825f80] [c026cb10] crashlog_init_fs+0x30/0xe0 (unreliable) [ 0.298185] [c1825f90] [c00023fc] do_one_initcall+0xdc/0x1c8 [ 0.303812] [c1825fc0] [c02638c4] kernel_init+0x110/0x1a4 [ 0.309154] [c1825ff0] [c000ad4c] kernel_thread+0x4c/0x68 [ 0.314488] Instruction dump: [ 0.317429] 9421fff0 7c0802a6 bfc10008 3fc0c02c 90010014 3bfed388 3800fff4 807f0004 [ 0.325117] 2f830000 41be00a4 38804000 4bda2809 <81630000> 7c691b78 907ed388 6d605e11 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34773	2012-12-18 20:10:02 +00:00
Gabor Juhos	1e8ab43834	generic: add missing symbols for 3.{6,7} ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34772	2012-12-18 20:09:58 +00:00
John Crispin	af48676b28	update to 3.7.1 ... SVN-Revision: 34771	2012-12-18 19:32:01 +00:00
Gabor Juhos	1080f68b2b	etrax: R.I.P. ... It is broken and it is not maintained by anyone since long time. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34768	2012-12-18 17:54:04 +00:00
Gabor Juhos	b86e82e5cc	s3c2442: R.I.P. ... It is broken and it is not maintained by anyone since long time. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34767	2012-12-18 17:54:02 +00:00
Gabor Juhos	db831511d2	goldfish: R.I.P. ... It is broken and it is not maintained by anyone since long time. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34766	2012-12-18 17:53:53 +00:00
Gabor Juhos	979bc5536d	ps3: R.I.P. ... It is broken and it is not maintained by anyone since long time. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34765	2012-12-18 17:53:51 +00:00
Gabor Juhos	6f794eeedb	pxcab: R.I.P. ... It is broken and it is not maintained by anyone since long time. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34764	2012-12-18 17:53:17 +00:00
Gabor Juhos	029553b698	refresh kernel configs with kconfig.pl ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34763	2012-12-18 15:54:15 +00:00
Gabor Juhos	7ff7340304	geos: add missing config-3.7 file ... Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34762	2012-12-18 15:51:45 +00:00
Gabor Juhos	149534f3ed	ar71xx: image: add OpenMesh profile ... It allows to build firmware images for all OpenMesh products in one step. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34761	2012-12-18 15:16:05 +00:00
Gabor Juhos	8903f8581b	kernel: update linux 3.7 to 3.7.1 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34760	2012-12-18 15:13:31 +00:00
Gabor Juhos	b2caa5db24	cns21xx: remove broken flag ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34759	2012-12-18 14:51:58 +00:00
Gabor Juhos	39796c434c	cns21xx: nuke 3.3 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34758	2012-12-18 14:51:58 +00:00
Gabor Juhos	991ebc29d7	cns21xx: switch to 3.6.11 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34757	2012-12-18 14:51:57 +00:00
Gabor Juhos	9e1a54296a	cns21xx: fix build errors on 3.6 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34756	2012-12-18 14:51:55 +00:00
Gabor Juhos	5a680f1cbf	geos: update to 3.7 ... Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34755	2012-12-18 14:50:48 +00:00
Gabor Juhos	9b15d3e22a	kernel: add 3.7 support for x86 ... Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34754	2012-12-18 14:50:47 +00:00
Gabor Juhos	d537f76ddd	kernel: Fix Cisco SIP NAT patch to build with 3.7 ... Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34753	2012-12-18 14:50:45 +00:00
Gabor Juhos	0c64d55b14	kernel: add missing config option BATTERY_DS2781 for 3.7 ... Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34749	2012-12-18 14:50:41 +00:00
Gabor Juhos	44b9898251	kernel: update linux 3.6 to 3.6.11 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34748	2012-12-18 14:41:16 +00:00
Gabor Juhos	fe8efb72ca	ramips: nuke 3.3 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34744	2012-12-17 22:28:11 +00:00
Gabor Juhos	fc0da6852e	ar71xx: nuke 3.3 support ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34743	2012-12-17 22:28:09 +00:00
Felix Fietkau	1bdea42662	kernel: fix a warning in the O_DIRECT debloat patch ... SVN-Revision: 34740	2012-12-17 20:55:49 +00:00
Felix Fietkau	2bda7a5b41	kernel: add some debloat patches, strip down procfs and make O_DIRECT support optional, saves ~15K after lzma on MIPS ... SVN-Revision: 34737	2012-12-17 15:11:39 +00:00
Gabor Juhos	d153bdbba9	generic: rtl836x: fix compiler warnings ... CC drivers/net/phy/rtl8366rb.o In file included from drivers/net/phy/rtl8366s.c:16:0: include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default] include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/phy/rtl8366s.c: In function 'rtl8366s_probe': drivers/net/phy/rtl8366s.c:1094:2: warning: label 'err_out' defined but not used [-Wunused-label] drivers/net/phy/rtl8366s.c:1055:32: warning: unused variable 'pdata'[-Wunused-variable] CC drivers/net/phy/rtl8366rb.o In file included from drivers/net/phy/rtl8366rb.c:17:0: include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default] include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/phy/rtl8366rb.c: In function 'rtl8366rb_probe': drivers/net/phy/rtl8366rb.c:1214:2: warning: label 'err_out' defined but not used [-Wunused-label] drivers/net/phy/rtl8366rb.c:1175:32: warning: unused variable 'pdata'[-Wunused-variable] CC drivers/net/phy/rtl8367.o In file included from drivers/net/phy/rtl8367.c:15:0: include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default] include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/phy/rtl8367.c: In function 'rtl8367_probe': drivers/net/phy/rtl8367.c:1712:2: warning: label 'err_out' defined but not used [-Wunused-label] drivers/net/phy/rtl8367.c:1677:32: warning: unused variable 'pdata' [-Wunused-variable] CC drivers/net/phy/rtl8367b.o In file included from drivers/net/phy/rtl8367b.c:15:0: include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default] include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/phy/rtl8367b.c: In function 'rtl8367b_probe': drivers/net/phy/rtl8367b.c:1494:2: warning: label 'err_out' defined but not used [-Wunused-label] drivers/net/phy/rtl8367b.c:1459:32: warning: unused variable 'pdata' [-Wunused-variable] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34731	2012-12-17 13:02:18 +00:00
Gabor Juhos	61d715505c	ar71xx: add profile and build image for UniFi AP Pro ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34730	2012-12-17 12:28:21 +00:00
Gabor Juhos	abbd18776e	ar71xx: add user-space support for UniFi AP Pro ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34728	2012-12-17 12:28:11 +00:00
Gabor Juhos	ff3f28265f	ar71xx: add kernel support for the UniFi AP Pro ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34727	2012-12-17 12:28:02 +00:00
John Crispin	7bcb6b5479	make pinctrl-falcon honour status="disbaled"; ... SVN-Revision: 34714	2012-12-16 10:03:28 +00:00
John Crispin	573cf13419	fix falcon profile ... SVN-Revision: 34713	2012-12-16 10:03:23 +00:00
John Crispin	33d3433d75	fix i2c-lantiq module ... SVN-Revision: 34712	2012-12-16 10:03:18 +00:00
John Crispin	b637eb598d	add falcon devicetree files ... SVN-Revision: 34711	2012-12-16 10:03:11 +00:00
Felix Fietkau	8c3306b8b6	kernel: add a missing config symbol for 3.7 ... SVN-Revision: 34710	2012-12-15 22:00:03 +00:00
Jonas Gorski	eba8cccd88	linux: generic: rtl836*: fix compilation with !CONFIG_OF ... fixes the following errors caused by r34682: CC [M] drivers/net/phy/rtl8366_smi.o In file included from drivers/net/phy/rtl8366_smi.c:26:0: drivers/net/phy/rtl8366_smi.h:149:46: warning: 'struct platform_device' declared inside parameter list [enabled by default] drivers/net/phy/rtl8366_smi.h:149:46: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/phy/rtl8366_smi.c:1398:65: warning: 'struct platform_device' declared inside parameter list [enabled by default] drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_smi_probe_plat': drivers/net/phy/rtl8366_smi.c:1400:44: error: dereferencing pointer to incomplete type drivers/net/phy/rtl8366_smi.c:1402:11: error: dereferencing pointer to incomplete type drivers/net/phy/rtl8366_smi.c:1403:16: error: dereferencing pointer to incomplete type drivers/net/phy/rtl8366_smi.c: At top level: drivers/net/phy/rtl8366_smi.c:1415:46: warning: 'struct platform_device' declared inside parameter list [enabled by default] drivers/net/phy/rtl8366_smi.c:1415:21: error: conflicting types for 'rtl8366_smi_probe' drivers/net/phy/rtl8366_smi.h:149:21: note: previous declaration of 'rtl8366_smi_probe' was here drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_smi_probe': drivers/net/phy/rtl8366_smi.c:1420:31: error: dereferencing pointer to incomplete type drivers/net/phy/rtl8366_smi.c:1424:10: error: dereferencing pointer to incomplete type drivers/net/phy/rtl8366_smi.c:1425:3: warning: passing argument 1 of 'rtl8366_smi_probe_of' from incompatible pointer type [enabled by default] drivers/net/phy/rtl8366_smi.c:1392:19: note: expected 'struct device_node *' but argument is of type 'struct platform_device *' drivers/net/phy/rtl8366_smi.c:1427:3: warning: passing argument 1 of 'rtl8366_smi_probe_plat' from incompatible pointer type [enabled by default] drivers/net/phy/rtl8366_smi.c:1398:5: note: expected 'struct platform_device *' but argument is of type 'struct platform_device *' drivers/net/phy/rtl8366_smi.c: At top level: drivers/net/phy/rtl8366_smi.c:1438:1: error: conflicting types for 'rtl8366_smi_probe' drivers/net/phy/rtl8366_smi.h:149:21: note: previous declaration of 'rtl8366_smi_probe' was here make[7]: *** [drivers/net/phy/rtl8366_smi.o] Error 1 make[6]: *** [drivers/net/phy] Error 2 make[5]: *** [drivers/net] Error 2 make[4]: *** [drivers] Error 2 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 34703	2012-12-15 13:32:02 +00:00
John Crispin	3ca51b5399	select hcd as a default package for the dgn3500 ... SVN-Revision: 34702	2012-12-15 11:01:16 +00:00
John Crispin	85e4da7e23	EASY80920 has 2 usb ports ... SVN-Revision: 34701	2012-12-15 11:01:11 +00:00
John Crispin	3dac521a49	remove 3.3 and 3.6 ... SVN-Revision: 34699	2012-12-15 02:01:08 +00:00
John Crispin	1dece11487	cleanup basefiles ... SVN-Revision: 34698	2012-12-15 02:01:00 +00:00
John Crispin	601bc28669	clean up modules.mk ... SVN-Revision: 34697	2012-12-15 02:00:55 +00:00
John Crispin	2c33df0376	add devicetrees ... SVN-Revision: 34691	2012-12-15 02:00:20 +00:00
John Crispin	3a948770cf	add linux-v3.7 ... SVN-Revision: 34687	2012-12-15 01:59:45 +00:00
John Crispin	d8678644f9	make rtl8366 driver OF capable ... SVN-Revision: 34682	2012-12-15 01:59:08 +00:00
Hauke Mehrtens	4901ac8225	brcm47xx: improve suppressing printing if a module was found in preinit function. ... Thank you Bastian Bittorf SVN-Revision: 34680	2012-12-14 22:45:12 +00:00
Gabor Juhos	57d7df3a35	generic: export include/linux/switch.h on 3.3, 3.6 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34678	2012-12-14 12:11:48 +00:00
Gabor Juhos	a860153cce	generic: disintegrate UAPI from include/linux/switch.h ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34677	2012-12-14 12:11:41 +00:00
Gabor Juhos	8aed692309	generic: refresh patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34676	2012-12-14 08:47:39 +00:00
Gabor Juhos	272ef8ac00	generic: update pci_disable_usb_common_quirks patch ... Fixes the following compiler warning: drivers/usb/host/pci-quirks.c:459:23: warning: 'quirk_usb_handoff_uhci' defined but not used [-Wunused-function] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34675	2012-12-14 08:32:56 +00:00
Gabor Juhos	2e2c88b625	ar71xx: reorder some patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34674	2012-12-14 07:16:56 +00:00
Gabor Juhos	34411a0cbd	ar71xx: merge unifi outdoor patch into the ubnt-xm one ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34673	2012-12-14 07:16:50 +00:00
Hauke Mehrtens	6c8efbfdc0	brcm47xx: Additional BCM4716 support ... Additional BCM4716 support. Still needs working ethernet driver. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34672	2012-12-13 18:57:38 +00:00
Hauke Mehrtens	6672d869da	brcm47xx: BCMA - Broadcom 2011 SDK Updates ... I noticed these changes when reviewing the 2011 Broadcom SDK. I haven't noticed any obvious changes in behavior with them applied; but thought I should at least pass them on. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34670	2012-12-13 18:54:04 +00:00
Hauke Mehrtens	97d22306da	brcm47xx: return the real irq number in bcma_core_irq ... The irq signal numbers that are send by the cpu are increased by 2 from the number programmed into the mips core by bcma. Return the irq number on which the irqs are send in bcma_core_irq() now. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34669	2012-12-13 18:51:10 +00:00
Gabor Juhos	6e4082f170	kernel: fix solos-pci skb double-free in DMA mode ... [juhosg: refresh the patches with quilt] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34667	2012-12-13 18:39:31 +00:00
Florian Fainelli	321852348f	kernel: fix perf build with uclibc toolchains on x86 ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34666	2012-12-13 17:34:22 +00:00
Florian Fainelli	5e7d69554e	kernel/3.6: backport an upstream build for perf with uClibc ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34662	2012-12-13 15:40:27 +00:00
Felix Fietkau	2bb7f82d8a	kernel: fix porting mistakes on the 3.6+ SIP NAT patch causing crashes ... SVN-Revision: 34657	2012-12-13 13:07:13 +00:00
Hauke Mehrtens	71712ec522	brcm47xx: this usb patch is not needed, the Broadcom SDK does it the other way. ... SVN-Revision: 34655	2012-12-13 00:12:42 +00:00
Hauke Mehrtens	5be97468f6	brcm47xx: use kernel 3.6.10 by default now ... SVN-Revision: 34654	2012-12-13 00:11:55 +00:00
Hauke Mehrtens	235c065e12	brcm47xx: suppress printing if a module was found in preinit function. ... SVN-Revision: 34653	2012-12-13 00:11:11 +00:00
Hauke Mehrtens	3a4a6cfd64	kernel: in kernel 3.6.8 and later tg3 depends on hwmon.ko ... SVN-Revision: 34652	2012-12-13 00:09:55 +00:00
Hauke Mehrtens	1bd8db0bd6	kernel: update bcma and ssb to master-2012-12-11-2 from wireless-testing ... SVN-Revision: 34651	2012-12-12 22:42:18 +00:00
Gabor Juhos	d085aad288	ar71xx: add profile and build initramfs image for the WNDR4300 ... It is not yet possible to use the default squasfsh/jffs2 images on NAND flashes, so only initramfs image is supported for now. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34650	2012-12-12 16:49:52 +00:00
Gabor Juhos	dcdfcb75f0	ar71xx: add user-space support for the NETGEAR WNDR4300 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34649	2012-12-12 16:49:51 +00:00
Gabor Juhos	bc82db7d78	ar71xx: add kernel support for the NETGEAR WNDR4300 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34647	2012-12-12 16:49:49 +00:00
Gabor Juhos	75b71f4a74	ar71xx: add ap91_pci_init_simple helper ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34646	2012-12-12 16:49:48 +00:00
Gabor Juhos	d7cebac243	ar71xx: add ath79_wmac_register_simple helper ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34645	2012-12-12 16:49:47 +00:00
Gabor Juhos	ec26814b0e	ar71xx: refresh 3.3 patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34644	2012-12-12 16:49:46 +00:00
Gabor Juhos	cdfc300948	ar71xx: remove superfluous USB patches for 3.3 ... SVN-Revision: 34643	2012-12-12 16:49:43 +00:00
Gabor Juhos	eece71be56	generic: fix 8139cp patch for 3.6 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34640	2012-12-12 08:37:27 +00:00
Gabor Juhos	2b378d11c8	kernel: update linux 3.6 to 3.6.10 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34639	2012-12-11 20:14:39 +00:00
Florian Fainelli	ed15c452a1	kernel: update to 3.7 final ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34626	2012-12-11 11:31:17 +00:00
Florian Fainelli	aa2dc106c6	switch to 3.6 kernel ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34623	2012-12-10 21:06:10 +00:00
Florian Fainelli	ff6116cbdf	add 3.6 kernel support ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34622	2012-12-10 21:06:05 +00:00
Florian Fainelli	17c76e5ca8	add sound feature ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34621	2012-12-10 21:05:48 +00:00
Florian Fainelli	cbfca35c76	generic: backport a fix for the input keymap-matrix module ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34620	2012-12-10 21:05:42 +00:00
Florian Fainelli	87c8808ca5	keyboard driver depends on input-matrixkmap for 3.6+ ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34619	2012-12-10 21:05:36 +00:00
Florian Fainelli	5c28c5255f	generic: backport an upstream fix for building snd-soc-pcm as a module ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34617	2012-12-10 21:05:27 +00:00
Florian Fainelli	f016b935d3	also list kmod-sound-core in the default packages ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34615	2012-12-10 21:05:11 +00:00
Gabor Juhos	dfd718d13d	mac80211: ath9k: allow to load EEPROM data via firmware API ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34606	2012-12-10 15:46:15 +00:00
Florian Fainelli	374a72411a	generic/kernel: add a fix for a common MIPS build failure. ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34602	2012-12-10 15:04:10 +00:00
Florian Fainelli	c1c6a23f13	kernel/generic: refresh 3.7 patches ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34601	2012-12-10 15:03:55 +00:00
Florian Fainelli	0f90806014	kernel/generic: port r34599 over 3.7 kernel ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34600	2012-12-10 15:03:51 +00:00
Florian Fainelli	67e85c0018	kernel/generic: fix build failure on missing uhci symbol ... linux-3.6.8/drivers/usb/host/pci-quirks.c:471: undefined reference to `uhci_check_and_reset_hc' Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34599	2012-12-10 14:24:28 +00:00
John Crispin	c2ae0ec02a	add support for Hauppauge Broadway ... This patch introduces OpenWRT support for the base Hauppauge/PCTV Broadway platform. It doesn't deal with the TV tuner or transcoder at this point, but the core functionality is working (Ethernet, wireless, USB, buttons, LEDs, etc). Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> SVN-Revision: 34595	2012-12-10 14:13:01 +00:00
Gabor Juhos	3cbc1a49e2	ar71xx: load ar934x_nfc driver earlier ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34589	2012-12-10 10:38:11 +00:00
Gabor Juhos	1f7ae58a2c	ar71xx: ar934x_nfc: allow to control DMA data swap via platform data ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34588	2012-12-10 10:38:07 +00:00
Gabor Juhos	2581173660	kernel: update linux 3.6 to 3.6.9 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34578	2012-12-08 15:01:33 +00:00
Gabor Juhos	47f9b2a110	ar71xx: TP-LINK also has a family TL-WDR ... Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34577	2012-12-07 19:10:57 +00:00
Gabor Juhos	d7ba2b4840	ar71xx: add profile and build image for TP-LINK TL-WA801N/ND ... Patch-by: Amir Sagie <openwrt-devel@taproot.org.il> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34576	2012-12-07 19:10:56 +00:00
Florian Fainelli	deeeb5f671	create Linksys WRTU54G-TM profile ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34572	2012-12-07 18:02:31 +00:00
Florian Fainelli	33f6c5ddb9	kernel: add missing USB configuration symbols after r34501 ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34568	2012-12-07 11:01:53 +00:00
Florian Fainelli	8236584b13	rename interrupt number constants ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34566	2012-12-06 22:41:14 +00:00
Florian Fainelli	f1e4da0389	remove the now deprecated /proc/adm8668 interface ... Proper gpiolib support is hooked instead. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34565	2012-12-06 22:41:09 +00:00
Florian Fainelli	849662a8ec	add a gpiolib driver ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34564	2012-12-06 22:41:04 +00:00
Florian Fainelli	78b235cfc3	do not reset WAN and LAN blocks ... This is taken care of by the tulip driver accordingly. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34563	2012-12-06 22:40:58 +00:00
Florian Fainelli	b3f36553cc	enable and advertise USB support ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34562	2012-12-06 22:40:54 +00:00
Florian Fainelli	a5aed4ec3a	add support for on-board EHCI controller ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34561	2012-12-06 22:40:49 +00:00
Florian Fainelli	88f6bf64cf	remove the "old" tulip forked driver ... We can now use the mainline tulip driver. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34559	2012-12-06 22:40:40 +00:00
Florian Fainelli	40ab1facd2	use the tulip platform driver ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34558	2012-12-06 22:40:36 +00:00
Florian Fainelli	445e77fdb5	patch the tulip driver to accept a platform variant ... Isolate the PCI specific parts and group them under CONFIG_TULIP_PCI CONFIG_TULIP_PLATFORM can be enabled for a platform style Tulip driver. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34557	2012-12-06 22:40:31 +00:00
Florian Fainelli	b1f1381c27	move clock frequencies into clock driver ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34556	2012-12-06 22:40:26 +00:00
Florian Fainelli	60663b12b2	add CONFIG_GPIO_PL061 config symbol ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34555	2012-12-06 22:40:21 +00:00
Florian Fainelli	1232f91efb	replace the custom mtd driver with a partition parser ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34554	2012-12-06 22:40:17 +00:00
Florian Fainelli	b516c8d89d	cleanup PCI controller code ... At some point we should make the ADM5120 PCI controller driver a real platform driver and share that one between the two targets. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34553	2012-12-06 22:40:12 +00:00
Florian Fainelli	1ed763b888	cleanup and make interrupt code more robust ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34552	2012-12-06 22:40:02 +00:00
Florian Fainelli	47ccbaaa91	remove frequency from /proc/cpuinfo ... This is not the place to expose it and duplicates code reading the system frequency. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34551	2012-12-06 22:39:57 +00:00
Florian Fainelli	e37f6fb458	provide a system clock to be used by the MIPS timer ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34550	2012-12-06 22:39:52 +00:00
Florian Fainelli	79c2ce01b7	get rid of the UART defines ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34549	2012-12-06 22:39:47 +00:00
Florian Fainelli	afc2b07be1	get rid of the specific UART driver and use AMBA PL010 ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34548	2012-12-06 22:39:43 +00:00
Florian Fainelli	2dee2133c5	implement early_printk without an early_console ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34547	2012-12-06 22:39:33 +00:00
Florian Fainelli	f85115efd8	simplify IRQ controller code ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34546	2012-12-06 22:39:27 +00:00
Florian Fainelli	50303d52e2	use platform_add_devices ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34545	2012-12-06 22:39:22 +00:00
Florian Fainelli	192c1e90bc	move time related functions to their own file ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34544	2012-12-06 22:39:18 +00:00
Florian Fainelli	1f939889ca	move setup-related functions to their own file ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34543	2012-12-06 22:39:08 +00:00
Felix Fietkau	abc03de599	kernel: add missing config symbols ... SVN-Revision: 34532	2012-12-06 14:11:16 +00:00
Felix Fietkau	a3843e7ec7	kernel 3.6+: nuke obsolete patches that are messing up oprofile builds ... SVN-Revision: 34506	2012-12-05 16:49:48 +00:00
Florian Fainelli	512baafc6b	kernel/3.3: move OHCI and EHCI platform drivers to generic ... These patches are not specific to bcm47xx and will be used on other platforms as well. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34501	2012-12-05 14:18:05 +00:00
Florian Fainelli	822ee5053e	cns3xxx: fix dwc_otg driver compat with udc-core ... function. This removes those from the dwc_otg driver and removes the patch that comments out the linkage of udc-core so that the dwc_otg driver can co-exist happily with other USB Device Controllers. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34475	2012-12-04 16:19:18 +00:00
Florian Fainelli	fd0729f35c	cns3xxx: advertise pcie usb usbgadget features ... Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34474	2012-12-04 16:19:12 +00:00
Florian Fainelli	d9d0814fc2	Fix Comtrend AR-5381u Power LED ... Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34471	2012-12-04 15:19:50 +00:00
Florian Fainelli	d3cda51994	do no longer rename amba-pl010 serial devices names ... Back in the days when we could not override /etc/inittab, it made a lot of sense to rename ttyAM to ttyS since this was the only supported serial device(s), we can now just put in an appropriate /etc/inittab file now. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34469	2012-12-03 16:18:40 +00:00
Felix Fietkau	a7220cd9f8	kernel: disable more pci quirks to save space on platforms that don't need them ... SVN-Revision: 34467	2012-12-03 10:33:47 +00:00
Felix Fietkau	ec885796c0	kernel 3.6+: switch to a crc32 implementation that is more suitable for small caches. reduces kernel image size by ~22 KiB on mips ... SVN-Revision: 34461	2012-12-02 18:37:41 +00:00
Felix Fietkau	24b31c9428	kernel: fix stripping symbol exports ... SVN-Revision: 34458	2012-12-02 17:42:17 +00:00
Hauke Mehrtens	2ac9ac5163	brcm47xx: read sprom vars without prefix for boardrev and boardtype if the prefixed one is not available. ... SVN-Revision: 34454	2012-12-02 16:11:39 +00:00
Felix Fietkau	38d3b8d0ea	kernel: patch in a working copy of elf.h instead of using relative path based hackery in #include statements ... SVN-Revision: 34449	2012-12-02 15:26:19 +00:00
Gabor Juhos	e0e43655ce	ramips: fix serial console for Belkin F5D8235 v1/v2 ... Based on a patch from #12533. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34445	2012-12-02 14:16:12 +00:00
Gabor Juhos	890f83dfb3	Update linux-atm fixes to reflect the final upstream pull request ... [juhosg: refresh the patches with quilt] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34443	2012-12-02 13:04:04 +00:00
Jo-Philipp Wich	476ea2bcb4	imagebuilder: use file_copy to deploy files/ in the image generation phase ... SVN-Revision: 34439	2012-12-02 12:20:43 +00:00
Florian Fainelli	4a1e2123eb	kernel: remove references to TARGET_ubicom32 ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34431	2012-11-30 10:53:51 +00:00
Florian Fainelli	527afd0e9a	remove target ... This target is unused, does not support any off the shelf hardware and has been a maintenance burden for quite some time now. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34430	2012-11-30 10:53:47 +00:00
Florian Fainelli	c830644d97	remove Linux 3.3 support ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34426	2012-11-29 21:43:02 +00:00
Florian Fainelli	763f780553	use a default kernel command-line to mount squashfs and jffs2 ... This fixes bug #9055. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34424	2012-11-29 21:42:53 +00:00
Gabor Juhos	7cde0281f4	kernel: Fix 8139cp ring buffer initialisation, tx timeout recovery, add BQL ... Patches queued upstream in net-next.git Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34415	2012-11-29 17:58:28 +00:00
Gabor Juhos	4f5defdc3b	ar71xx: switch to 3.6.8 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34414	2012-11-29 17:53:42 +00:00
Gabor Juhos	ea17e36482	kernel: Update Geos to 3.6.8 ... Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34411	2012-11-29 17:37:19 +00:00
Gabor Juhos	543c2c27d1	kernel: Add ATM fixes pending upstream merge (queue reduction, race fixes) ... Patches about to go into net-next.git Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34410	2012-11-29 17:37:18 +00:00
Gabor Juhos	df6727639a	kernel: Add missing CONFIG_BATTERY_DS2781 option to generic 3.6 config ... Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34409	2012-11-29 17:37:16 +00:00
Gabor Juhos	44131bd785	ramips: rt305x: add profile and build image for the Asus RT-N13U ... Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34407	2012-11-29 17:37:14 +00:00
Gabor Juhos	d3994b7408	ramips: rt305x: add user-space support for the Asus RT-N13U ... Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34406	2012-11-29 17:37:13 +00:00
Gabor Juhos	0ec59e6235	ramips: rt305x: add kernel support for the Asus RT-N13U Wireless-N300 Router ... The work has been backported from openwrt-dreambox with some modifications & code cleanup. * updated config-3.3 * updated config-3.6 * renamed rt-n13 to rt-n13u * fixed mach-rt-n13u.c [juhosg: move user-space support and image generation into separate patches] Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34405	2012-11-29 17:37:11 +00:00
Gabor Juhos	c2f018fca2	remove common symbols from 3.6 configs ... The removed symbols are present in the generic configuration. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34404	2012-11-29 15:21:41 +00:00
Gabor Juhos	1f516235ea	remove common symbols from 3.3 configs ... The removed symbols are present in the generic configuration. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34403	2012-11-29 15:21:35 +00:00
Gabor Juhos	3a4d0ebd5c	kernel: update linux 3.6 to 3.6.8 ... Also refresh the affected patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34402	2012-11-29 07:42:19 +00:00
Florian Fainelli	ee16e144bb	use physmap-flash part_probe_types ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34398	2012-11-27 18:42:49 +00:00
Florian Fainelli	0588d13a3e	Fix typo in 96338GW power LED. ... Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34396	2012-11-27 18:42:42 +00:00
Florian Fainelli	dd852e242d	add AudioCodes AC495 SoC ... Found in the AudioCodes Tulip AC494 ATA. Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34395	2012-11-27 18:42:39 +00:00
Florian Fainelli	d59ba20030	do not call clk_put() on the timer clock ... We don't support disabling the clock, but this is actually what it would do. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34394	2012-11-27 18:42:36 +00:00
Florian Fainelli	5d6208f34d	do not list specific board compatible strings ... The general practice is to use the general SoC compatible string in both the DTS and the board specific .c file. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34393	2012-11-27 18:42:32 +00:00
Florian Fainelli	94b7be6dd7	remove unused variables from Makefile.boot ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34392	2012-11-27 18:42:28 +00:00
Hauke Mehrtens	efd00e6240	brcm47xx: fix title of Bcm4705-wl profile ... SVN-Revision: 34378	2012-11-25 16:41:00 +00:00
Hauke Mehrtens	a3d976aff5	brcm47xx: add profile for bcm4705 with wl driver ... SVN-Revision: 34336	2012-11-25 16:15:27 +00:00
Gabor Juhos	57b7879a4e	ramips: ramips_eth: use Kconfig definition to enable debug ... The Kconfig identifier to enable debugging in the driver was different from the actually used one. Fix that. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34332	2012-11-25 14:25:54 +00:00
Gabor Juhos	21d5df8700	ramips: add DIR-615 D userspace support ... Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and Makefile changes to build images for this target. However, without the userspace bits a ramips machine can't use wifi as the necessary "eeprom" data is to be extracted by a hotplug script; also, sysupgrade support and default led configuration are missing. An IRC user reported these changes allowed him to use wifi on his hardware. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34331	2012-11-25 14:25:27 +00:00
Hauke Mehrtens	608efcdbd0	kernel: add CONFIG_BCMA_POSSIBLE=y to generic config as it is set in most of the target configs. ... SVN-Revision: 34330	2012-11-25 14:14:17 +00:00
Hauke Mehrtens	aa8e887a46	brcm47xx: whitespace cleanups ... SVN-Revision: 34329	2012-11-25 14:03:51 +00:00
Hauke Mehrtens	be77f9951c	brcm47xx: fix cpu clock detection on ASUS WL-520gU ... The ASUS WL-520gU and some other similar Asus devices have a BCM5354 running at 200MHZ and not at 240 which is the default for this SoC. This fixes #4083. SVN-Revision: 34325	2012-11-24 20:28:06 +00:00
Hauke Mehrtens	264873b3c5	brcm47xx: watchdog: deactivate NOWAYOUT. ... In the old configuration the SoC issued a reboot if the watchdog was killed also if it was kill with TERM and not KILL. This will fix #11724. SVN-Revision: 34324	2012-11-24 20:24:27 +00:00
Hauke Mehrtens	c62d86ecb8	brcm47xx: update watchdog driver ... This watchdog driver should work with SoC having a PMU. This fixes #11720. SVN-Revision: 34323	2012-11-24 20:07:25 +00:00
Jonas Gorski	60e0e0d6e6	bcm63xx: Add a fixup for rt2x00 devices. ... This patch adds support for defining rt2x00 eeprom data. This eeprom data can be extracted from flash or loaded directly from a firmware file. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 34322	2012-11-24 14:19:22 +00:00
Jonas Gorski	746b4cec06	bcm63xx: Enable LED pin support for ath9k pci fixup. ... Some boards need specifying LED pin in order to get it working. For example, in board HW556 (Huawei HG556a) "led_pin" must be "2". By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1". Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 34321	2012-11-24 14:19:16 +00:00
Jonas Gorski	1baeede939	bcm63xx: fix spi transfer handling ... * Accept transfers without bits_per_word set. * Work around the inability of the hardware of keeping CS asserted. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 34320	2012-11-24 14:19:09 +00:00
Gabor Juhos	b0b994cf76	ar71xx: set pad6 cfg for AR8327 on the AP136 board ... Also override the pll_1000 value. Without these settings ethernet suffers from packet loss. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34316	2012-11-23 20:55:34 +00:00
Gabor Juhos	49d4b5581d	generic: ar8216: set delay values for SGMII mode on AR8327 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34315	2012-11-23 20:55:26 +00:00
Florian Fainelli	6b63716262	add preliminary support for musl ... Musl is an alternative C-library, see http://www.musl-libc.org for more infos. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34314	2012-11-23 20:02:29 +00:00
Jo-Philipp Wich	b73f22de1e	imagebuilder: merge r25078 to align files/ handling with current buildroot ... SVN-Revision: 34301	2012-11-22 19:46:54 +00:00
Gabor Juhos	3205b52d1c	generic: ar8216: introduce ar8216_mib_op helper ... The ar8216_mib_{capture,flush} functions are similar. Move the common code into a helper and use that from the original functions. This change also fixes a lockdep warning in ar8216_mib_flush. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34297	2012-11-22 10:33:03 +00:00
Gabor Juhos	10d30f2d2d	swconfig: make it compatible with 3.7 ... swconfig does not compile with 3.7 because struct netlink_notify->pid has been renamed to struct netlink_notify->portid and struct genl_info->snd_pid has been renamed to struct genl_info->snd_portid Use the new names and add compatibility patches to 3.3 and 3.6. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34288	2012-11-21 17:38:11 +00:00
John Crispin	f7ead0a2d5	adds proper package selection for dgn3500 ... SVN-Revision: 34286	2012-11-21 06:06:48 +00:00
Gabor Juhos	e20a0baa04	cns21xx: add support for 3.6 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34285	2012-11-20 21:37:53 +00:00
Gabor Juhos	5c740aa23c	generic: add some missing symbols for 3.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34284	2012-11-20 21:34:43 +00:00
Gabor Juhos	2a792f32b5	generic: ar8216: fix port number check in 'ar8xxx_mib_work_func' ... Also add a WARN_ON to 'ar8216_mib_fetch_port_stat' Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34283	2012-11-20 20:40:04 +00:00
Gabor Juhos	258b2f2dc2	generic: ar8216: remove an unblanced mutex_unlock call ... Fixes the following warning: [ 94.080000] [ 94.080000] ===================================== [ 94.080000] [ BUG: bad unlock balance detected! ] [ 94.080000] 3.3.8 #2 Tainted: G O [ 94.080000] ------------------------------------- [ 94.080000] swconfig/1220 is trying to release lock (&priv->mib_lock) at: [ 94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c [ 94.080000] but there are no more locks to release! [ 94.080000] [ 94.080000] other info that might help us debug this: [ 94.080000] 2 locks held by swconfig/1220: [ 94.080000] #0: (genl_mutex){+.+...}, at: [<80222430>] genl_rcv+0x14/0x34 [ 94.080000] #1: (&dev->sw_mutex){+.+...}, at: [<801da018>] swconfig_get_dev+0x88/0xb4 [ 94.080000] [ 94.080000] stack backtrace: [ 94.080000] Call Trace: [ 94.080000] [<8028dc58>] dump_stack+0x8/0x34 [ 94.080000] [<800a5128>] print_unlock_inbalance_bug+0xe0/0xfc [ 94.080000] [<800a82c0>] lock_release+0x18c/0x1c8 [ 94.080000] [<80292074>] __mutex_unlock_slowpath+0xd8/0x17c [ 94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c [ 94.080000] [<801db688>] swconfig_get_attr+0xbc/0x394 [ 94.080000] [<8022261c>] genl_rcv_msg+0x1cc/0x214 [ 94.080000] [<80221a18>] netlink_rcv_skb+0x6c/0xe8 [ 94.080000] [<80222440>] genl_rcv+0x24/0x34 [ 94.080000] [<80221370>] netlink_unicast+0x15c/0x22c [ 94.080000] [<8022175c>] netlink_sendmsg+0x240/0x2d0 [ 94.080000] [<801ef544>] sock_sendmsg+0x84/0x9c [ 94.080000] [<801f0648>] __sys_sendmsg+0x1cc/0x270 [ 94.080000] [<801f207c>] sys_sendmsg+0x48/0x7c [ 94.080000] [<8006ad78>] stack_done+0x20/0x40 [ 94.080000] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34282	2012-11-20 20:40:03 +00:00
Gabor Juhos	82b57b0c28	generic: ar8216: add missing locking calls ... Fixes the following lockdep warning: [ 19.160000] ------------[ cut here ]------------ [ 19.160000] WARNING: at drivers/net/phy/ar8216.c:322 ar8216_rmw+0x54/0xa4() [ 19.170000] Modules linked in: nf_defrag_ipv4 nf_conntrack ehci_hcd sd_mod pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multip ort xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) at h9k_hw(O) ath(O) mac80211(O) usbcore usb_common scsi_mod nls_base crc7 crc_itu_t crc_ccitt cfg80211(O) compat(O) arc4 aes_generic cry pto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O) [ 19.210000] Call Trace: [ 19.220000] [<8028dc38>] dump_stack+0x8/0x34 [ 19.220000] [<80072da0>] warn_slowpath_common+0x78/0xa4 [ 19.230000] [<80072de4>] warn_slowpath_null+0x18/0x24 [ 19.230000] [<801de820>] ar8216_rmw+0x54/0xa4 [ 19.240000] [<801df460>] ar8216_mib_capture+0x70/0xd0 [ 19.240000] [<801df944>] ar8xxx_mib_work_func+0x34/0x98 [ 19.250000] [<80089a7c>] process_one_work+0x28c/0x460 [ 19.250000] [<8008a630>] worker_thread+0x22c/0x334 [ 19.260000] [<8008e544>] kthread+0x88/0x90 [ 19.260000] [<80065020>] kernel_thread_helper+0x10/0x18 [ 19.270000] [ 19.270000] ---[ end trace 22e9d696adfa6a08 ]--- Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34281	2012-11-20 20:40:00 +00:00
Gabor Juhos	c0f73ac607	generic: convert yaffs to use kuid_t and kgid_t on 3.6+ ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34280	2012-11-20 17:45:24 +00:00
Gabor Juhos	188908e885	ar71xx: make rb750_nand driver compatible with 3.7 ... Also add compatibility patches for the currently supported kernels. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34279	2012-11-20 16:29:43 +00:00
Gabor Juhos	8194237789	ar71xx: make ar934x_nfc driver compatible with 3.7 ... Also add compatibility patches for the currently supported kernels. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34278	2012-11-20 16:29:42 +00:00
Gabor Juhos	4468fd7ae4	ar71xx: refresh rb4xx_nand patch ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34277	2012-11-20 15:53:17 +00:00
Gabor Juhos	46a3b818b9	ar71xx: remove buffer verification reference from rb4xx_nand.c ... It is a dead code. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34276	2012-11-20 14:40:22 +00:00
Gabor Juhos	674b91ce0e	ar71xx: fix GPIO function selection for AR934x ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34275	2012-11-20 14:27:17 +00:00
Gabor Juhos	d833ca527d	ar71xx: restore rb4xx kernel partition size to the original value ... The new lzma compressed elf kernel image fits into that, even on devices with large page NAND chips. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34274	2012-11-20 12:17:45 +00:00
Gabor Juhos	33a99ce46b	ar71xx: install lzma compressed elf kernel image from wget2nand ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34273	2012-11-20 12:17:44 +00:00
Gabor Juhos	68b5aa2fdf	ar71xx/image: provide lzma compressed elf kernel image ... This will be used on the RB4xx/RB7xx/RB2011 boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34272	2012-11-20 12:17:43 +00:00
Gabor Juhos	97867f8717	ar71xx/image: relink loader.elf image to LOADADDR ... This allows to load the resulting image directly from RouterBOOT. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34271	2012-11-20 12:17:41 +00:00
Gabor Juhos	dd092fd10c	ramips: set clk_is_20mhz for rt2x00 on RT3352/RT5350 ... Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34270	2012-11-20 07:19:10 +00:00
Gabor Juhos	6c1fbb2d5c	mac80211/rt2x00: add rf_vals for Rt3352 with Xtal=20MHz ... [juhosg: move ramips specific stuff into a followup patch] Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34269	2012-11-20 07:19:09 +00:00
Gabor Juhos	8e4cefc7f8	refresh all kernel configurations ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34267	2012-11-20 07:19:06 +00:00
Jonas Gorski	8dc72c5c4d	Revert "target specific patches have nothing to do in generic.." ... This reverts commit r34230, as it is causing build failures: make[3] -C package/mtd compile imagetag.c:35:32: fatal error: linux/bcm963xx_tag.h: No such file or directory compilation terminated. make[4]: *** [imagetag.o] Error 1 Any patches modifying exported kernel headers need to reside in generic as toolchain/kernel-headers only applies generic patches. SVN-Revision: 34255	2012-11-19 12:38:26 +00:00
Imre Kaloz	4c043300fc	fix 820-usb_add_usb_find_device_by_name.patch ... SVN-Revision: 34254	2012-11-19 10:56:09 +00:00
Hauke Mehrtens	4fa5781a95	kernel: refresh patches ... SVN-Revision: 34253	2012-11-18 21:40:30 +00:00
Hauke Mehrtens	86cc79ac98	brcm47xx: add support for kernel 3.6 ... This is based on the patch by Peter Wagner. SVN-Revision: 34252	2012-11-18 21:27:00 +00:00
Hauke Mehrtens	db763080f4	kernel: add missing generic config options for 3.6+ ... SVN-Revision: 34250	2012-11-18 20:54:53 +00:00
Hauke Mehrtens	c159c7a462	kernel: add CONFIG_XZ_DEC=y to generic ... CONFIG_SQUASHFS_XZ selects CONFIG_XZ_DEC so this could also be moved. SVN-Revision: 34249	2012-11-18 20:48:53 +00:00
Gabor Juhos	d577d69838	ar71xx: use custom LZMA dictionary size for WNDR3700 images ... Based on a patch by Hannu Nyman. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34248	2012-11-18 20:25:13 +00:00
Imre Kaloz	935ca3f3eb	add 3.7-rc6 support (patch 820 still has to be fixed) ... SVN-Revision: 34247	2012-11-18 18:52:38 +00:00
Gabor Juhos	863657d040	generic: ar8216: add MIB counter support for the AR8216 switch as well ... Thanks to Jonas Gorski for the reference URL. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34245	2012-11-18 16:21:00 +00:00
Gabor Juhos	98f30aac8e	generic: ar8216: rename AR8216_*_STATS_* defines ... The names are misleading, those are only valid from AR8236. The AR8216 chip uses different offsets. Thanks to Jonas Gorski for the report. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34244	2012-11-18 16:20:56 +00:00
Gabor Juhos	9abd8cd004	generic ar8216: allow to read/reset MIB counters via swconfig ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34243	2012-11-18 12:26:35 +00:00
Gabor Juhos	4b17323b51	generic: ar8216: use dynamically allocated private data in ar8216_probe ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34242	2012-11-18 12:26:34 +00:00
Gabor Juhos	169e596268	ar71xx: add user-space support for the RB435G board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34240	2012-11-18 10:18:02 +00:00
Gabor Juhos	d44d954dec	ar71xx: add kernel support for the RB435G board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34239	2012-11-18 10:18:01 +00:00
Gabor Juhos	d62bddc620	ar71xx: update PCI IRQ map for RB4xx devices ... Should fix #12269. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34238	2012-11-18 09:51:04 +00:00
Gabor Juhos	31881357af	ar71xx: create profile and build image for the OpenMesh MR600 board ... Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34237	2012-11-18 09:32:41 +00:00
Gabor Juhos	9da2c85b67	ar71xx: enable sysupgrade for the OpenMesh MR600 ... Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34235	2012-11-18 09:32:39 +00:00
Gabor Juhos	6380301d01	ar71xx: rename om2p.sh upgrade script to openmesh.sh ... It will be used on other boards as well. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34234	2012-11-18 09:32:37 +00:00
Gabor Juhos	d325e622d2	scripts/om-fwupgradecfg-gen.sh: add support for the MR600 ... Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34233	2012-11-18 09:32:36 +00:00
Gabor Juhos	c3174179b7	ar71xx: add user-space support for the OpenMesh MR600 board ... Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34232	2012-11-18 09:32:35 +00:00
Gabor Juhos	8d4857d677	ar71xx: add kernel support for the OpenMesh MR600 board ... Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34231	2012-11-18 09:32:33 +00:00
Imre Kaloz	b220071cd2	target specific patches have nothing to do in generic.. ... SVN-Revision: 34230	2012-11-18 09:22:38 +00:00
Gabor Juhos	c90128ce31	generic: remove temporary config file introduced in r34227 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34229	2012-11-18 08:51:56 +00:00
Gabor Juhos	ff1e854511	kernel: update linux 3.6 to 3.6.7 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34227	2012-11-18 08:41:31 +00:00
Florian Fainelli	a4c205011b	move patches to patches-2.6.36 ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34220	2012-11-16 16:32:55 +00:00
Florian Fainelli	974b9f5c9a	remove broken flag ... The SPARC qemu target works like a charm with the following qemu command-line: qemu-system-sparc64 -M sun4u -L /home/florian/dev/qemu/pc-bios -kernel build_dir/linux-sparc/linux-3.6.6/vmlinux -nographic Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34219	2012-11-16 16:32:52 +00:00
Florian Fainelli	5261a171e9	update to kernel 3.6.6 ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34218	2012-11-16 16:32:49 +00:00
Florian Fainelli	7e199fcc06	add missing framebuffer config symbol ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34217	2012-11-16 16:32:45 +00:00
Florian Fainelli	b7f2f14801	advertise jffs2, squashfs and ext4 features ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34216	2012-11-16 16:32:42 +00:00
Florian Fainelli	c6d9304d17	resync kernel configuration with 3.6 kernel ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34215	2012-11-16 16:32:39 +00:00
Florian Fainelli	dd70319e6d	build root filesystems and install them in $(BIN_DIR) ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34214	2012-11-16 16:32:36 +00:00
Florian Fainelli	8ad0b56ba5	do not build crashlog on sparc too ... This is crashing the kernel in crashlog_init_fs(), until fixed, disable it for SPARC too. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34213	2012-11-16 16:32:33 +00:00
Florian Fainelli	19811eddb4	switch to kernel 3.6.6 ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34212	2012-11-16 16:32:29 +00:00
Florian Fainelli	f98ac68e0e	add support for 3.6 kernel ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34211	2012-11-16 16:32:26 +00:00
Florian Fainelli	c555479127	move acx-mac80211 to the ar7 generic target ... None of the AC49x boards that we support actually have Wi-Fi. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34208	2012-11-16 13:00:55 +00:00
Florian Fainelli	b763d47bfe	3.6: add some framebuffer related config symbols ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34207	2012-11-16 13:00:51 +00:00
Florian Fainelli	bc73cf5345	push atm, br2684ctl and kmod-pppoa down the DSL Profile ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34206	2012-11-16 13:00:48 +00:00
Hauke Mehrtens	485f9573f8	brcm47xx: revert r33935: check for .ELF header in partition parser ... For sysupgrade the generic image should be used and the special image for the wgt634u is just needed for initial flashing over CFE. russell reported that with this patch sysupgrdae did not worked for him any more and he could not reproduce the error described in #11420. With the patch the linux partition also contained the loader which is in the first 128KB. SVN-Revision: 34201	2012-11-15 16:39:45 +00:00
Gabor Juhos	7da001d068	scripts: rename om2p-fwupgradecfg-gen.sh to more generic om-fwupgradecfg-gen.sh ... It will be used for non OM2P boards as well. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34200	2012-11-14 14:18:33 +00:00
Gabor Juhos	ee94ed4597	ar71xx: add profile and build image for the Ubiquiti UniFi AP-Outdoor board ... Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34198	2012-11-13 20:57:19 +00:00
Gabor Juhos	9c5c079329	ar71xx: add user-space support for the Ubiquiti UniFi AP-Outdoor board ... Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34197	2012-11-13 20:57:18 +00:00
Gabor Juhos	75c1d3ccc2	ar71xx: add support for the Ubiquiti UniFi AP-Outdoor device ... [juhosg: - rename and refresh 660-MIPS-ath79-ubnt-xm-add-unifi-outdoor patches - wrap long lines in mach-ubnt-xm - remove default network config, set it from uci-defaults/network instead - remove user-space, and image generation stuff] Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34196	2012-11-13 20:57:17 +00:00
Gabor Juhos	7ab0e1566f	ar71xx: add profiles and build images for old PowerCloud System devices ... [juhosg: - use 'PowerCloud Systems' instead of 'PCS' in the profiles - sort SingleProfile instances in image/Makefile] Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34195	2012-11-13 20:57:15 +00:00
Gabor Juhos	f6c3a8ddd6	generic: refresh 3.6 patches ... SVN-Revision: 34194	2012-11-13 20:57:13 +00:00
Florian Fainelli	e7f77f2742	fix badly named patch file ... SVN-Revision: 34193	2012-11-13 17:39:44 +00:00
Florian Fainelli	857456aef8	switch to kernel 3.6.6 ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34192	2012-11-13 17:20:19 +00:00
Florian Fainelli	390b8eb864	fix CBUS UART registration ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34191	2012-11-13 17:20:14 +00:00
Gabor Juhos	62c8ff19ad	ar71xx: add profile and build image for the TL-WA7510N board ... [juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch] Signed-off-by: Stefan Helmert <helst_listen@aol.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34190	2012-11-13 14:48:03 +00:00
Gabor Juhos	165b7d2173	ar71xx: user space support for the TL-WA7510N ... [juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch] Signed-off-by: Stefan Helmert <helst_listen@aol.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34188	2012-11-13 14:48:01 +00:00
Gabor Juhos	91bab828aa	ar71xx: add support for TP-Link TL-WA7510N ... It is mostly the same as TL-WA901N. WLAN and LAN are working. LAN LED is working. WLAN signal strength LEDs are not working yet. http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n [juhosg: - cleanup commit message - move non kernel related stuff into separate changes - rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch - merge WA7510N support into the mach-tl-wa901nd.c file - add 3.6 support] Signed-off-by: Stefan Helmert <helst_listen@aol.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34187	2012-11-13 14:48:00 +00:00
Gabor Juhos	ce9d4fadfa	ar71xx: refresh patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34186	2012-11-13 14:47:58 +00:00
John Crispin	3b419e506c	fixes ar9 / dgn3500 support ... SVN-Revision: 34180	2012-11-13 08:54:14 +00:00
John Crispin	dd8c625424	previous commit pushed 1 file too many ;) ... SVN-Revision: 34179	2012-11-12 21:36:23 +00:00
John Crispin	ced0cf3a94	move ethernet hw init to init/uninit functions ... This should fix the stalled irq problem seen by several people. This is not the real fix, but rather moves the bug to the un/init patch of the driver. The real bug still needs to be fixed, but this workaround should be suffcient to make the ethernet stable. SVN-Revision: 34177	2012-11-12 21:35:01 +00:00
Hauke Mehrtens	31541f81c3	brcm47xx: remove double definition of kmod-tg3 added in r34150 ... SVN-Revision: 34176	2012-11-12 21:34:00 +00:00
Hauke Mehrtens	bac93bdd8e	brcm47xx: fix cfe config detection on WGT634U broken in r33920 ... Thanks Russell Senior for reporting this. SVN-Revision: 34175	2012-11-12 21:32:33 +00:00
Luka Perkov	00243027dd	cns3xxx: merge gpio patches ... SVN-Revision: 34174	2012-11-12 19:27:30 +00:00
Luka Perkov	fb9b572f0a	cns3xxx: fix build failure after r34168 ... SVN-Revision: 34173	2012-11-12 19:27:29 +00:00
Florian Fainelli	a8c492dbb3	MIPS: add a build fix for arch/mips/boot/compressed/decompress.c ... And get rid of the AR7 patch because at least the Alchemy SoC also needs it Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34170	2012-11-12 12:49:47 +00:00
Imre Kaloz	5cddb170cd	reorder, rename and refresh patches ... SVN-Revision: 34169	2012-11-12 09:18:00 +00:00
Imre Kaloz	77504ac06f	split spi patch, follow mainline file naming ... SVN-Revision: 34168	2012-11-12 08:22:14 +00:00
Imre Kaloz	9a780e0328	split the i2c patch, merge the retry fixup ... SVN-Revision: 34167	2012-11-12 08:21:38 +00:00
John Crispin	5f30fe31b6	move redboot boardconfig patch into target folder ... SVN-Revision: 34166	2012-11-12 07:56:37 +00:00
Imre Kaloz	527c473674	add support for the Tonze AP-422/425 ... SVN-Revision: 34165	2012-11-11 21:04:30 +00:00
Imre Kaloz	ee9e3bf82e	refresh patch ... SVN-Revision: 34164	2012-11-11 21:03:52 +00:00
Imre Kaloz	dcfd6cd5a4	generate single images for tftp flashing as well as sysupgrade images for boards with old u-boot ... SVN-Revision: 34163	2012-11-11 20:57:04 +00:00
Luka Perkov	16275bdd15	cns3xxx: convert dwc_otg patches to files ... SVN-Revision: 34162	2012-11-11 20:03:58 +00:00
Luka Perkov	e38adfc912	cns3xxx: convert ethernet patches to files ... SVN-Revision: 34161	2012-11-11 20:03:56 +00:00
Jonas Gorski	306894b88f	bcm63xx: switch to 3.6.6 ... SVN-Revision: 34160	2012-11-11 19:57:17 +00:00
Imre Kaloz	4658e463d9	move fixed mapping of internal devices into vmalloc region ... SVN-Revision: 34158	2012-11-11 19:29:27 +00:00
Florian Fainelli	9760644af4	advertise squashfs feature ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34157	2012-11-11 19:26:54 +00:00
Florian Fainelli	dd541cbefa	add support for Linux 3.6 ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34156	2012-11-11 19:26:50 +00:00
Florian Fainelli	f7fcb3c845	split kernel config between generic, au1500 and au1550 ... Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34155	2012-11-11 19:26:44 +00:00
Florian Fainelli	b363a7e491	add support for Linux 3.6 ... SVN-Revision: 34154	2012-11-11 18:41:09 +00:00
Florian Fainelli	854c504781	move files directory to files-3.3 ... SVN-Revision: 34153	2012-11-11 18:40:48 +00:00
Hauke Mehrtens	cadd36a303	brcm47xx: remove ssb-gige package ... CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more. The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package. SVN-Revision: 34150	2012-11-11 17:30:33 +00:00
Florian Fainelli	62c9156af6	generate image for AC49x ... Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34149	2012-11-11 16:11:39 +00:00
Florian Fainelli	9c7d221d47	create AC49x subtarget ... Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34148	2012-11-11 16:11:34 +00:00
Florian Fainelli	668234c109	create generic subtarget ... Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34147	2012-11-11 16:11:29 +00:00
Florian Fainelli	4891549bcd	detect AC49x flash partitions ... Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34146	2012-11-11 16:11:22 +00:00
Florian Fainelli	feb968d964	support AC49x bootloader environment ... Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34145	2012-11-11 16:11:14 +00:00
Florian Fainelli	7d09c61d65	add AudioCodes AC49x platform support to kernel ... Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34144	2012-11-11 16:11:09 +00:00
Florian Fainelli	d9b89db380	free memory below kernel offset ... Some bootloaders (e.g. PSPBoot on AC49x) have a load-offset, this frees that memory region so it is usable for Linux. Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34143	2012-11-11 16:11:00 +00:00
Jo-Philipp Wich	298a8e2300	x86/generic: don't disable usbfs (#12452) ... SVN-Revision: 34139	2012-11-10 23:28:58 +00:00
Jonas Gorski	c54fa281b1	bcm63xx: fix compilation with kmod-ohci enabled with 3.6 ... Fixes the following error: drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start': drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration] Reported-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 34138	2012-11-10 22:10:47 +00:00
Jonas Gorski	15519bec9c	bcm63xx: add two missing usb patches to 3.6 ... SVN-Revision: 34137	2012-11-10 19:59:16 +00:00
Jonas Gorski	06ad6ffe16	bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6 ... SVN-Revision: 34136	2012-11-10 19:59:07 +00:00
Imre Kaloz	f3f3f52259	cns3xxx: clean up pcie patches ... Combine two pcie patches (2nd patch undid the 1st patch) together and refresh the other affected patches Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 34132	2012-11-09 21:37:54 +00:00
John Crispin	71ddec8091	add more profiles ... SVN-Revision: 34131	2012-11-09 19:26:58 +00:00
John Crispin	88e4d93802	a few more dts files (WIP) ... SVN-Revision: 34130	2012-11-09 19:26:43 +00:00
John Crispin	a30b3066ce	add mtd split and atm patch ... SVN-Revision: 34129	2012-11-09 19:26:30 +00:00
Felix Fietkau	46288bf98e	x86: use $(strip) for the at_keyboard check ... SVN-Revision: 34127	2012-11-09 10:53:36 +00:00
Felix Fietkau	0a9e05fb0e	x86: only enable at_keyboard for the generic and kvm_guest subtargets to avoid hangs on alix2 and others (thx, russell) ... SVN-Revision: 34126	2012-11-09 10:19:51 +00:00
Gabor Juhos	502661f685	generic: sanitize deps_initramfs list ... If any filename in the intramfs dependency list contains a colon, that causes a kernel build error like this: /devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns. Stop. make[5]: *** [usr] Error 2 Fix it by removing such filenames from the deps_initramfs list. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34125	2012-11-09 09:07:29 +00:00
Luka Perkov	965c190444	cns3xxx: exit from laguna late_initcall if not running on laguna board ... SVN-Revision: 34120	2012-11-08 11:31:56 +00:00
Imre Kaloz	0da0dc0f2b	cns3xxx: add PPS support for laguna ... Many Laguna products have on-board GPS with Pulse-per-second (PPS) support. This patch adds kernel support (statically) and adds the platform data in laguna board support. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 34115	2012-11-08 05:42:31 +00:00
Imre Kaloz	efcdc21824	fixup symbol selection ... SMP already selects HAVE_ARM_TWD and HAVE_ARM_SCU, ARCH_CNS3XXX already selects MIGHT_HAVE_PCI SVN-Revision: 34114	2012-11-08 05:40:34 +00:00
Luka Perkov	4d66b749de	cns3xxx: fix coding style in board script ... SVN-Revision: 34113	2012-11-07 23:12:06 +00:00
John Crispin	6090ddc896	adds fon20n profile ... SVN-Revision: 34112	2012-11-07 20:26:31 +00:00
John Crispin	3991526989	ramips: use kernel 3.6.6 ... ## Booting image at 80800000 ... Image Name: MIPS OpenWrt Linux-3.6.6 Created: 2012-11-06 14:19:54 UTC System Control Status = 0x20440000 Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 3560768 Bytes = 3.4 MB Load Address: 80000000 Entry Point: 80000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80000000) ... ## Giving linux memsize in MB, 32 Starting kernel ... [ 0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 0001964c (MIPS 24KEc) [ 0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x01ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x01ffffff] [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Writing ErrCtl register=0000c388 [ 0.000000] Readback ErrCtl register=0000c388 [ 0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem) [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:48 [ 0.000000] console [ttyS1] enabled, bootconsole disabled [ 0.000000] console [ttyS1] enabled, bootconsole disabled [ 0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952) [ 0.090000] pid_max: default: 32768 minimum: 301 [ 0.100000] Mount-cache hash table entries: 512 [ 0.110000] NET: Registered protocol family 16 [ 0.120000] MIPS: machine is Allnet ALL0239-3G [ 0.140000] bio: create slab <bio-0> at 0 [ 0.150000] Switching to clocksource MIPS [ 0.160000] NET: Registered protocol family 2 [ 0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.200000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.210000] TCP: reno registered [ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.240000] NET: Registered protocol family 1 [ 5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 5.490000] msgmni has been set to 52 [ 5.500000] io scheduler noop registered [ 5.510000] io scheduler deadline registered (default) [ 5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A [ 5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A [ 5.560000] physmap platform flash device: 00800000 at bf000000 [ 5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000 [ 5.600000] Amd/Fujitsu Extended Query Table at 0x0040 [ 5.610000] Amd/Fujitsu Extended Query version 1.3. [ 5.620000] number of CFI chips: 1 [ 5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0 [ 5.640000] Creating 6 MTD partitions on "physmap-flash.0": [ 5.650000] 0x000000000000-0x000000030000 : "u-boot" [ 5.660000] 0x000000030000-0x000000040000 : "u-boot-env" [ 5.680000] 0x000000040000-0x000000050000 : "factory" [ 5.690000] 0x000000050000-0x000000130000 : "kernel" [ 5.700000] 0x000000130000-0x000000800000 : "rootfs" [ 5.710000] mtd: partition "rootfs" set to be root filesystem [ 5.730000] split_squashfs: error occured while reading from "physmap-flash.0" [ 5.740000] 0x000000050000-0x000000800000 : "firmware" [ 5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33 [ 5.780000] TCP: cubic registered [ 5.780000] NET: Registered protocol family 17 [ 5.790000] 8021q: 802.1Q VLAN Support v1.8 [ 5.820000] Freeing unused kernel memory: 2676k freed [ 6.490000] Button Hotplug driver version 0.4.1 - preinit - Press the [f] key and hit [enter] to enter failsafe mode - regular preinit - - init - Please press Enter to activate this console. [ 10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993 [ 10.170000] Backport based on wireless-testing.git master-2012-09-07 [ 10.180000] compat.git: wireless-testing.git [ 10.210000] cfg80211: Calling CRDA to update world regulatory domain [ 10.230000] cfg80211: World regulatory domain updated: [ 10.240000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.250000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.270000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.280000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.300000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.430000] NET: Registered protocol family 10 [ 10.760000] PPP generic driver version 2.4.2 [ 10.820000] l2tp_core: L2TP core driver, V2.0 [ 10.840000] l2tp_netlink: L2TP netlink interface [ 10.870000] sit: IPv6 over IPv4 tunneling driver [ 10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.060000] NET: Registered protocol family 24 [ 11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max) [ 11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 14.510000] device eth0.1 entered promiscuous mode [ 14.520000] device eth0 entered promiscuous mode [ 14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready [ 14.550000] br-lan: port 1(eth0.1) entered forwarding state [ 14.560000] br-lan: port 1(eth0.1) entered forwarding state [ 16.560000] br-lan: port 1(eth0.1) entered forwarding state [ 16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33 BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- BARRIER BREAKER (Bleeding Edge, r34079) ----------------------------------------------------- * 1/2 oz Galliano Pour all ingredients into * 4 oz cold Coffee an irish coffee mug filled * 1 1/2 oz Dark Rum with crushed ice. Stir. * 2 tsp. Creme de Cacao ----------------------------------------------------- root@OpenWrt:/# SVN-Revision: 34111	2012-11-07 20:26:21 +00:00
John Crispin	480892226d	ramips: add HAVE_CLK to Kconfig on all ramips socs ... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 34110	2012-11-07 20:26:04 +00:00
John Crispin	feb31be6af	ramips: add linux-3.6 configuration for ramips socs ... Signed-off-by: Daniel Golle <dgolle@allnet.de> create mode 100644 target/linux/ramips/rt288x/config-3.6 create mode 100644 target/linux/ramips/rt305x/config-3.6 create mode 100644 target/linux/ramips/rt3883/config-3.6 SVN-Revision: 34109	2012-11-07 20:25:55 +00:00
John Crispin	ca1fcaed5b	ramips: port patches to linux-3.6 ... Signed-off-by: Daniel Golle <dgolle@allnet.de> create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch SVN-Revision: 34108	2012-11-07 20:25:34 +00:00
Jonas Gorski	f2bb7754f5	bcm63xx: Enable endian check support for ath9k pci fixup. ... Some ath9k caldatas need to be "endian checked". This patch allows selecting wether to enable endian check or not. Endian check is disabled by default. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 34105	2012-11-07 09:01:03 +00:00
Imre Kaloz	f2b75b517b	fixup typos in the compex patch ... SVN-Revision: 34104	2012-11-07 07:51:24 +00:00
Jonas Gorski	a50d121d8e	linux: export bcm963xx_tag.h to userspace ... Export bcm963xx_tag.h so mtd can use it without using kernel includes. Signed-off-by: Catalin Patulea <cat@vv.carleton.ca> [jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header from original location, refresh patches, use a more matching patch number, port to 3.6] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 34103	2012-11-06 15:21:46 +00:00
Luka Perkov	865933a0ec	cns3xxx: refresh kernel config file ... SVN-Revision: 34102	2012-11-06 11:16:43 +00:00
Luka Perkov	9a5c26d4ef	cns3xxx: use files directory ... SVN-Revision: 34101	2012-11-06 11:16:41 +00:00
John Crispin	7404e59bbd	add OWRTDTB marker patch ... SVN-Revision: 34100	2012-11-06 10:39:43 +00:00
John Crispin	3a1851964e	add support for arv7525 ... SVN-Revision: 34097	2012-11-06 07:38:24 +00:00
Imre Kaloz	e141cbb0f9	refresh patches ... SVN-Revision: 34095	2012-11-06 05:45:12 +00:00
Imre Kaloz	1a9dfd566e	add default packages ... SVN-Revision: 34094	2012-11-06 05:39:08 +00:00
Jonas Gorski	0722fd9c63	linux: generic: fix split_squashfs for 3.6 ... _read expects the retlen to be initialized to zero, which the mtd_read helper does. So fix it by using mtd_read instead of calling _read directly. SVN-Revision: 34093	2012-11-06 00:48:21 +00:00
Jonas Gorski	5bc7d81a20	bcm63xx: fix SPW303V images ... SPW303V also needs its CRC fixed up since increasing the image size to 4MB to prevent the dual image mode of CFE. SVN-Revision: 34091	2012-11-05 22:50:29 +00:00
Gabor Juhos	e92da5e7ae	ar71xx: nuke ath79_set_usb_power_gpio helper ... It is no longer used. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34088	2012-11-05 13:23:28 +00:00
Gabor Juhos	f2528b1792	ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34087	2012-11-05 13:23:27 +00:00
Gabor Juhos	e8669729bc	kernel: update linux 3.6 to 3.6.6 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34086	2012-11-05 13:22:09 +00:00
Imre Kaloz	d822ecfdf8	use the mainline machname for the compex boards ... SVN-Revision: 34083	2012-11-05 11:38:23 +00:00
Gabor Juhos	a0dd47bbed	ramips: enable USB power on the DIR-645 ... Closes #12422. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34082	2012-11-05 11:04:45 +00:00
Gabor Juhos	5e43b934fd	linux/3.3: backport an upstream GPIO patch ... The backported patch introduces new flags to automatically export GPIOs when using the convenience unctions gpio_request_one() or gpio_request_array(). This will be used by ar71xx/ramips platforms. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34081	2012-11-05 11:04:43 +00:00
Gabor Juhos	829aaedcbf	ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N ... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 34078	2012-11-05 06:58:53 +00:00
Gabor Juhos	ed35253f4c	ar71xx: don't use the unknown LED on the ZCN-1523-5 board ... According to #12421, GPIO 1 controls the power output on the unused lines of the LAN2 port. Remove the LED definition in order to prevent possible permanent hardware damage. If someone needs that, the power-out feature can be controlled via the GPIO sysfs interface. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34076	2012-11-04 22:08:54 +00:00
Gabor Juhos	1b744e1ca5	ar71xx: include mtd layout in the command line for ZCN-1523H-* boards ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34074	2012-11-04 21:12:20 +00:00
Gabor Juhos	b78a736dc2	ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards ... Also add the missing ATH79_MACH_ZCN_1523H_5 symbol. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34072	2012-11-04 20:15:18 +00:00
Felix Fietkau	6040b1d29a	linux-3.6: fix portability of some includes files in tools/ used on the host ... SVN-Revision: 34068	2012-11-04 17:01:15 +00:00
John Crispin	05fbb370dc	3.6 is not the default yet ... SVN-Revision: 34065	2012-11-03 13:29:44 +00:00
John Crispin	a9ad36b7f1	adds dts files and make devicetree images buildable ... SVN-Revision: 34064	2012-11-02 20:07:47 +00:00
John Crispin	c8ae6dac56	update ase target for 3.6 ... SVN-Revision: 34063	2012-11-02 20:07:41 +00:00
John Crispin	dc8641f7fa	add subtarget, as of 3.6 we dont seperate xway SoC ... SVN-Revision: 34062	2012-11-02 20:07:36 +00:00
John Crispin	dd619da4fc	adds 3.6 files, patches and config ... SVN-Revision: 34061	2012-11-02 20:07:26 +00:00
John Crispin	736835343c	move files/ -> files-3.3/ ... SVN-Revision: 34060	2012-11-02 20:07:02 +00:00
John Crispin	fa316620a7	prepare Makefile for 3.6 ... SVN-Revision: 34059	2012-11-02 20:06:51 +00:00
Gabor Juhos	0005762690	generic: make yaffs work on 3.6 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34054	2012-11-01 11:07:23 +00:00
Gabor Juhos	ffcb4b0fe1	generic: rename jffs2 patches ... Make room for the upcoming yaffs patches. No functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34053	2012-11-01 11:07:16 +00:00
Daniel Dickinson	7e0f8049fa	Fix feeds.conf.default when no SVN info present ... SVN-Revision: 34051	2012-11-01 07:15:49 +00:00
Gabor Juhos	6c8c3ee77d	generic: use mtd_* helpers in the yaffs code ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34046	2012-10-31 21:17:30 +00:00
Imre Kaloz	3c12bad276	move PCIe init to subsys init call ... ARM Linux PCI/PCIe hardware intialization needs to occur before device_init as it does not support hotplug. I have modeled the cns3xxx PCIe init after other ARM platforms. Registering it early resolves resource issues occuring during bus enumeration that occur when a device driver is linked static in the kernel. Instead of passing in a bitmask to enable the 2 available ports, link detect is used to enable ports that have a valid link. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 34044	2012-10-31 20:16:53 +00:00
Gabor Juhos	07a762c4c5	kernel: update linux 3.6 to 3.6.5 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34042	2012-10-31 20:09:39 +00:00
Gabor Juhos	a4126685c6	generic: split yaffs-3.2-fix patch ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34041	2012-10-31 19:33:12 +00:00
Gabor Juhos	4baeb543f0	generic: replace yaffs-2.6.39 patch ... Use backported upstream patches instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34032	2012-10-31 15:12:45 +00:00
Gabor Juhos	b888c2deab	generic: replace yaffs mutex_fix patch ... Use a backported patch instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34021	2012-10-30 21:16:24 +00:00
Gabor Juhos	d54782d01a	generic: replace yaffs symlink fix patch ... Use a backported patch instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34020	2012-10-30 21:16:23 +00:00
Gabor Juhos	9a8ccc1a08	generic: rename yaffs patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34019	2012-10-30 21:16:21 +00:00
Florian Fainelli	e14e4306c9	set earlyprintk UART to be the default Realview UART ... SVN-Revision: 34015	2012-10-30 16:56:10 +00:00
Gabor Juhos	449f88df0f	generic: fold yaffs_git_2010_10_20 patch to generic/files ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34013	2012-10-30 14:58:17 +00:00
Gabor Juhos	56190ed0fc	generic: fold yaffs_cvs_2009_04_24 patch to generic/files ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34012	2012-10-30 14:58:13 +00:00
Gabor Juhos	7228a91a3b	ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards ... The default pll_1000 value had to be changed in order to make it working. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33993	2012-10-29 17:24:30 +00:00
Gabor Juhos	e91dc2e5b3	target: refresh all target configs with kconfig.pl ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33987	2012-10-29 10:11:05 +00:00
Imre Kaloz	c0c69c974f	add missing 3.6 symbols ... SVN-Revision: 33986	2012-10-29 10:00:02 +00:00
Imre Kaloz	8e49dfe68a	the uImage's filename will hardly change ... SVN-Revision: 33985	2012-10-29 09:55:20 +00:00
Gabor Juhos	f7b2089704	generic: add more symbols for 3.6 ... Also refresh the config file with kconfig.pl. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33984	2012-10-29 09:08:59 +00:00
Gabor Juhos	e4db63fd64	ar71xx: add initial support for 3.6 ... The nand subtarget is not working yet. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33983	2012-10-28 19:52:02 +00:00
Gabor Juhos	87186c5ed4	kernel: update linux 3.6 to 3.6.4 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33982	2012-10-28 18:59:39 +00:00
Gabor Juhos	a6549ac1cb	ar71xx: remove NO_AUTOINCR flag from the NAND drivers ... The flag is not present in 3.6. Also add compatibility patches for 3.3. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33971	2012-10-28 12:21:15 +00:00
Gabor Juhos	9a37cf7ec6	generic: fix crashlog patch for 3.6 ... kmsg_dump() uses an iterator to receive log buffer content since 3.5. Change the 'crashlog_do_dump' function in order to make it compatible with the new version. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33970	2012-10-28 09:50:50 +00:00
Gabor Juhos	e2ec99889e	ar71xx: ag71xx: fix build_skb arguments for 3.6 ... Also add a compatibility patch for 3.3 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33969	2012-10-27 17:11:06 +00:00
Gabor Juhos	7640a7cc24	generic: fix tcp_window_check patch for 3.6 ... Move the new entry to the end of the tcp_sysctl_table array to fix the following error: [ 7.670000] sysctl table check failed: net/netfilter/nf_conntrack_tcp_max_retrans No data [ 7.680000] Call Trace: [ 7.680000] [<80273bc4>] dump_stack+0x8/0x34 [ 7.680000] [<80128710>] __register_sysctl_table+0x374/0x3a8 [ 7.690000] [<868d5034>] nf_conntrack_l4proto_unregister+0x158/0x1a0[nf_conntrack] [ 7.700000] [<868d50e4>] nf_conntrack_l4proto_register+0x68/0x21c[nf_conntrack] [ 7.710000] [<868b237c>] need_ipv4_conntrack+0x35c/0xb60[nf_conntrack_ipv4] [ 7.710000] [ 7.720000] nf_conntrack_l4proto_tcp4 :protocol register failed [ 7.720000] nf_conntrack_ipv4: can't register pernet ops [ 7.780000] nf_nat: Unknown symbol nf_nat_seq_adjust_hook (err 0) [ 7.790000] nf_nat: Unknown symbol need_ipv4_conntrack (err 0) [ 7.800000] iptable_nat: Unknown symbol nf_nat_packet (err 0) [ 7.810000] iptable_nat: Unknown symbol nf_nat_setup_info (err 0) [ 7.820000] iptable_nat: Unknown symbol nf_nat_icmp_reply_translation (err 0) [ 7.820000] iptable_nat: Unknown symbol need_ipv4_conntrack (err 0) [ 7.840000] ipt_MASQUERADE: Unknown symbol nf_nat_setup_info (err 0) [ 7.860000] nf_nat_ftp: Unknown symbol nf_nat_follow_master (err 0) [ 7.870000] nf_nat_ftp: Unknown symbol __nf_nat_mangle_tcp_packet (err 0) [ 7.890000] nf_nat_irc: Unknown symbol nf_nat_follow_master (err 0) [ 7.900000] nf_nat_irc: Unknown symbol __nf_nat_mangle_tcp_packet (err 0) Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33968	2012-10-27 15:42:25 +00:00
Imre Kaloz	50be09e1f7	instead of updating the whole file, just add the additional boards ... SVN-Revision: 33966	2012-10-27 13:29:36 +00:00
Imre Kaloz	1a4f117398	rename erase size variables ... SVN-Revision: 33964	2012-10-27 10:50:55 +00:00
Imre Kaloz	549d5a6e34	add support for Netgear WN802T ... SVN-Revision: 33963	2012-10-27 10:48:22 +00:00
Imre Kaloz	cf7aed0a76	don't enforce rootfs location ... SVN-Revision: 33962	2012-10-27 10:43:47 +00:00
Imre Kaloz	702fd5cdb5	generate images for the D-Link DWL-3150 as well ... SVN-Revision: 33961	2012-10-27 09:42:58 +00:00
Gabor Juhos	3a86affcdd	ar71xx: enable sysupgrade for the CAP4200AG board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33960	2012-10-27 08:55:42 +00:00
Gabor Juhos	e99d557c08	ar71xx: add profile and build image for the CAP4200AG ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33958	2012-10-27 08:55:40 +00:00
Gabor Juhos	9287e0c863	ar71xx: add user-space part for the CAP4200AG ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33957	2012-10-27 08:55:39 +00:00
Gabor Juhos	d54c9653e9	ar71xx: add support for the Senao CAP4200AG board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33956	2012-10-27 08:55:38 +00:00
Gabor Juhos	3b7cb4eb4a	ar71xx: add ath79_wmac_disable_[25]ghz helpers ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33955	2012-10-27 08:55:37 +00:00
Gabor Juhos	e8fc46b7c5	generic: allow to disable [25]GHz support in ath9k via platform data ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33954	2012-10-27 08:55:36 +00:00
Gabor Juhos	c92998f9d9	generic: use mtd_read in myloader parser ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33952	2012-10-27 07:57:59 +00:00
Gabor Juhos	269872fe1e	ar71xx: use mtd_read in wrt160nl_part ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33951	2012-10-27 07:57:58 +00:00
Gabor Juhos	973eda6077	ar71xx: use mtd_read in tplinkpart ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33950	2012-10-27 07:57:57 +00:00
Gabor Juhos	28f3adc2ed	ar71xx: generate 4,8,16M images for the WPE72 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33949	2012-10-27 07:57:55 +00:00
Gabor Juhos	ee9376d153	generic: swconfig: use led_set_brightness in LED control code ... The 'led_brightness_set' function has been renamed to 'led_set_brightness' in recent ernels. Use the new name and add a compatibility patch for 3.3. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33946	2012-10-26 18:58:18 +00:00
Gabor Juhos	1127781d40	generic: add missing symbols for 3.6 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33945	2012-10-26 18:58:15 +00:00
Gabor Juhos	ff481a5518	ar71xx: reject TP-Link images containing a bootloader ... The original TP-Link firmware images can be flashed via the sysupgrade command, however those may contain a bootloader. Flashing such an image via sysupgrade bricks the board, and it can't be recovered without a serial console. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33944	2012-10-26 18:58:13 +00:00
Gabor Juhos	db5eea6acd	ramips: use correct key code for the RFKILL switch on the TEW-691GR ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33943	2012-10-26 18:53:44 +00:00
Florian Fainelli	c691d165c7	add 3.6 kernel configuration ... SVN-Revision: 33942	2012-10-26 15:24:19 +00:00
Florian Fainelli	9af90aa80c	add missing 6345 clock bits patch to 3.6 patches ... SVN-Revision: 33941	2012-10-26 15:24:14 +00:00
Florian Fainelli	fad6afdf06	add some more 3.6 config symbols ... SVN-Revision: 33940	2012-10-26 15:24:10 +00:00
Florian Fainelli	8d69af7c9f	add preliminary support for 3.6 kernel ... SVN-Revision: 33936	2012-10-25 21:16:51 +00:00
Hauke Mehrtens	6a699a8ae8	brcm47xx: check for .ELF header in partition parser ... The image format for the wgt634u is different from the normal format. Without this patch the partition parser detects a 128kb bigger partition after every update. This closes #11420 Thank you b.sander for the patch. SVN-Revision: 33935	2012-10-25 19:49:20 +00:00
Hauke Mehrtens	d4ef5de604	kernel: add PCI id 14e4:4350 to ssb ... * 14e4:4350 is found on a Broadcom BCM43222. * remove some warnings when using a BCM43222. SVN-Revision: 33929	2012-10-25 15:50:47 +00:00
Felix Fietkau	1e2962e63c	kernel: add a few missing config symbols for x86. added to generic config because of dependencies, so that kernel_menuconfig does not remove them again ... SVN-Revision: 33923	2012-10-25 15:11:45 +00:00
Felix Fietkau	5591188ac3	kernel: refresh config files using kconfig.pl ... SVN-Revision: 33922	2012-10-25 15:11:40 +00:00
Hauke Mehrtens	dca633f1c8	kernel: update bcma and ssb to master-2012-10-18 from wireless-testing ... * update the flash driver for bcm47xx to use the stubs already in bcma * do some misc enhancements to the flash drivers for bcm47xx SVN-Revision: 33920	2012-10-25 14:33:47 +00:00
Florian Fainelli	dea2da55df	fix Ethernet DMA for 636x and 6328 after r33916 ... SVN-Revision: 33918	2012-10-25 11:54:41 +00:00
Florian Fainelli	917670922b	add support for the Dynalink RTA770BW board ... This board id is used by the Siemens Gigaset SE515 router. SVN-Revision: 33917	2012-10-24 21:25:22 +00:00
Florian Fainelli	bdfcbb8bee	make BCM6345 Ethernet DMA changes runtime checks ... The semantics of the DMA engine are identical, we just have a couple of special case handling. SVN-Revision: 33916	2012-10-24 21:25:10 +00:00
Florian Fainelli	df6f9072ab	ARM: fix XZ decompressor stub build failure on strstr() ... SVN-Revision: 33915	2012-10-24 15:57:31 +00:00
Florian Fainelli	b5c27880ee	fixup generic 3.6 kernel config ... It was not meant to be committed as-is in r33911 SVN-Revision: 33914	2012-10-24 15:57:24 +00:00
Florian Fainelli	a6bfca90b0	fix IFF_NO_IP_ALIGN bitmask to contain only 1 bit set ... This issue got introduced while porting the patch over 3.6 in r33897 SVN-Revision: 33913	2012-10-24 13:23:20 +00:00
Florian Fainelli	7e856e5a97	make all 3.6 patches apply and build ... SVN-Revision: 33911	2012-10-24 13:05:22 +00:00
Florian Fainelli	4afb91a12f	swconfig: get rid of the NLA_PUT_* macros ... Upstream kernel 3.6 has removed this usage, use the plain functions directly as intended. SVN-Revision: 33906	2012-10-24 13:05:04 +00:00
Jo-Philipp Wich	f600ec5b3b	x86: allow both old and new grub signatures in sysupgrade ... SVN-Revision: 33898	2012-10-23 16:34:00 +00:00
Imre Kaloz	949b46d13d	linux 3.6 support (work in progress) ... SVN-Revision: 33897	2012-10-23 12:21:34 +00:00
Jonas Gorski	0d2cf5f9e3	kernel: move the bcma fallback sprom fix to generic ... bcm63xx needs the bcma fallback sprom fix, too. SVN-Revision: 33896	2012-10-23 10:57:49 +00:00
Jonas Gorski	0cc4bed41c	add support for Comtrend AR5381u. ... Router: Comtrend AR5381u. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: fix subject, indentation in patch] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 33895	2012-10-23 10:57:47 +00:00
Jonas Gorski	d73871fb18	add support for Comtrend AR5387un. ... Router: Comtrend AR5387un. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: fix subject, indentation in patch] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 33894	2012-10-23 10:57:44 +00:00
Jonas Gorski	e93725a743	add support for HomeStation ADB P.DG A4001N. ... Router: HomeStation ADB P.DG A4001N. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: fix subject, indentation in patch] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 33893	2012-10-23 10:57:39 +00:00
Felix Fietkau	95e642632a	x86: correct image magic for grub2 images ... Sysupgrade broke on x86 when grub2 superceded grub. This patch corrects tha magic_word to be expected in grub2 combined images. Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 33890	2012-10-22 16:06:29 +00:00
Florian Fainelli	61686a1514	add back support for BCM6345 Ethernet DMA engine ... SVN-Revision: 33889	2012-10-22 12:57:22 +00:00
Florian Fainelli	eeed82c04e	fix clocks bits for BCM6345 ... SVN-Revision: 33888	2012-10-22 12:57:14 +00:00
Florian Fainelli	ca25e61c6c	refresh 3.3 patches ... SVN-Revision: 33887	2012-10-21 21:30:30 +00:00
Jonas Gorski	e6171dfb2c	Add F@ST2604 board support. ... Add Sagem F@ST2604 board support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 33886	2012-10-21 14:35:06 +00:00
Gabor Juhos	f1f388d527	ar71xx: rw2458n - fix flash parts ... See #12338. Redwave rw2458 has uboot, not redboot. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33867	2012-10-19 18:32:49 +00:00
Gabor Juhos	b530d9d2b3	ramips: disable 5GHz on the built in wireless mac of the TEW-69{1,2}GR ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33864	2012-10-19 17:42:22 +00:00
Gabor Juhos	6ca2970e4b	ramips: add profile and build image for the TEW-691GR board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33852	2012-10-18 07:23:13 +00:00
Gabor Juhos	21180e29f7	ramips: add user-space support for TEW-691GR ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33851	2012-10-18 07:23:12 +00:00
Gabor Juhos	25d53c4c28	ramips: rt3883: add initial support for the TRENDnet TEW-691GR board ... No wireless support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33850	2012-10-18 07:23:11 +00:00
Gabor Juhos	462a53c367	ramips: add profile and build image for the TEW-692GR board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33849	2012-10-18 07:23:10 +00:00
Gabor Juhos	d3c368c324	ramips: add user-space support for the TEW-692GR board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33847	2012-10-18 07:23:07 +00:00
Gabor Juhos	7f8b7207c9	ramips: rt3883: add initial support for TRENDnet TEW-692GR board ... No wireless support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33846	2012-10-18 07:23:06 +00:00
Gabor Juhos	bf9ae9432b	ramips: add profile and build image for the DIR-645 board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33845	2012-10-18 07:23:04 +00:00
Gabor Juhos	06edafd079	ramips: add user space support for the DIR-645 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33844	2012-10-18 07:23:03 +00:00
Gabor Juhos	d1a253a2fd	ramips: rt3883: add inital support for the DIR-645 board ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33843	2012-10-18 07:23:02 +00:00
Gabor Juhos	e962c16a88	ramips: use get_magic_long in sysupgrade image check ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33842	2012-10-18 07:23:00 +00:00
Gabor Juhos	0045449b1b	generic: add driver for the the RTL8367R{B,-VB} switches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33839	2012-10-18 07:22:56 +00:00
Felix Fietkau	96fa602499	ixp4xx: add sysupgrade support ... Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/ixp4xx/base-files/lib/ixp4xx.sh | 25 ++ target/linux/ixp4xx/base-files/lib/upgrade/platform.sh | 156 +++++++++++++++++ target/linux/ixp4xx/image/Makefile | 11 + 3 files changed, 192 insertions(+) SVN-Revision: 33828	2012-10-17 22:03:46 +00:00
Felix Fietkau	879b7a7a9b	cns3xxx: update FIQ header file and disable RWFO ... Update header file appropriately and disable read for ownership Note that the FIQ support implements a workaround that provides a performance boost over the traditional upstream workaround which ensures cache lines are exclusive on driver CPU using 'read for ownership'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/cns3xxx/config-3.3 | 2 +- target/linux/cns3xxx/patches-3.3/460-cns3xxx_fiq_support.patch | 9 ++++----- 2 files changed, 5 insertions(+), 6 deletions(-) SVN-Revision: 33827	2012-10-17 22:03:37 +00:00
John Crispin	6993e19532	drop GPIODEV platform code ... SVN-Revision: 33825	2012-10-17 21:53:37 +00:00
Gabor Juhos	7a72f01a72	ar71xx: merge machine support patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33820	2012-10-17 18:27:50 +00:00
Gabor Juhos	2e1bc1e15b	ar71xx: also use the ath79_set_ar934x_eth_cfg helper for DB120 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33819	2012-10-17 18:27:48 +00:00
Gabor Juhos	31387947c8	ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33818	2012-10-17 18:27:47 +00:00
Gabor Juhos	5ffc08e3dc	ar71xx: add a helper function for setting up ETH_CFG register on AR934x ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33817	2012-10-17 18:27:45 +00:00
Gabor Juhos	35a91a4fe8	ar71xx: OM2P-HS sysupgrade support ... Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33803	2012-10-17 08:26:05 +00:00
Gabor Juhos	c5a32cfc92	ar71xx: add support for the OpenMesh OM2P-HS board ... Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33800	2012-10-17 08:26:01 +00:00
Florian Fainelli	254d851d8a	nuport-mac: various fixes ... - properly check for the link up condition in the phylib adjust callback - do not assign skb->dev, eth_type_trans() already does it - handle skb allocation failures in the refill path SVN-Revision: 33780	2012-10-15 21:03:57 +00:00
Florian Fainelli	60ecd5fe04	merge the RDC R-321x target as a subtarget of x86 ... SVN-Revision: 33779	2012-10-15 18:54:34 +00:00
Gabor Juhos	f1283d8583	ar71xx: fix sysupgrade for jjPlus JWAP003 ... [juhosg: change commit message] Signed-off-by: Artur Wronowski <arteqw@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33769	2012-10-14 16:24:26 +00:00
Gabor Juhos	1944f7b916	ar71xx: ew-dorin: added ethernet switch configuration ... Signed-off-by: embedded wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33768	2012-10-14 16:24:25 +00:00
Gabor Juhos	62ab2b0da6	ar71xx: unbreak building images for OpenMesh OM2P/OM2P-LC ... Commit r33248 introduced a regression by passing the board name plus 'board=' in the third argument. The board name string has to be put into the image as identifier of the image type. [juhosg: fix OpenMesh template instead of use of string substitution] Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33767	2012-10-14 16:24:22 +00:00
Florian Fainelli	e4bebad4f7	add Actiontec PK5000 LEDs ... Also share them between the GT701 and the PK5000. Patch from Daniel Gimpelevich. SVN-Revision: 33756	2012-10-13 17:47:45 +00:00
Florian Fainelli	d78371f5c0	vlynq: rework probing and clocking setup ... Handle the different vlynq device versions, and make the vlynq code more in line with the original vlynq implementation. Patch from Daniel Gimpelevich. SVN-Revision: 33755	2012-10-13 17:47:36 +00:00
Florian Fainelli	0f04f7479c	remove the squashfs alignement define ... Patch from Daniel Gimpelevich. SVN-Revision: 33754	2012-10-13 17:47:30 +00:00
Florian Fainelli	ec4e61e558	handle LOADER_MAGIC2 in ar7part ... This is required for Actiontec PK5000 devices. Path from Daniel Gimpelevich. SVN-Revision: 33753	2012-10-13 17:47:25 +00:00
Florian Fainelli	e5a65db1b5	increase the flash resource size to its maximum value ... CFI detection will reduce the resource size to its real value. Patch from Daniel Gimpelevich. SVN-Revision: 33752	2012-10-13 17:47:20 +00:00
Florian Fainelli	7205421c5b	reinstate the fixed PHY fallback for devices with undetectable switches ... At least devices without a switch present on the MDIO bus still get a valid link and work as expected (such as the Linksys WAG54Gv2). SVN-Revision: 33751	2012-10-13 17:47:14 +00:00
Florian Fainelli	3794a6a9dd	enable mvswitch driver ... And fix the default network configuration to create the required VLANs. Patch from Daniel Gimpelevich. SVN-Revision: 33750	2012-10-13 17:47:09 +00:00
Florian Fainelli	99598d2473	use the second available LED to encore mode boot states ... Patch from Daniel Gimpelevich. SVN-Revision: 33749	2012-10-13 17:47:04 +00:00
Florian Fainelli	31c324f451	use wpad-mini instead of hostapd ... SVN-Revision: 33744	2012-10-13 17:46:32 +00:00
Imre Kaloz	c24df51736	add support for new Option modules (GTM66xxWFS/GTM67xxWFS) ... Add new device ID's for the hso driver as well as usb storage Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33743	2012-10-13 06:58:42 +00:00
Jo-Philipp Wich	4cfd3dc8ed	x86/kvm_guest: enable PCIE support ... SVN-Revision: 33741	2012-10-12 16:51:31 +00:00
Florian Fainelli	e7b2a4170c	copy initramfs kernel to bin directory ... SVN-Revision: 33726	2012-10-11 15:45:24 +00:00
John Crispin	ba6751058b	gpiodev/gpioctl RIP ... SVN-Revision: 33725	2012-10-11 11:58:09 +00:00
Imre Kaloz	88a740ff80	fix (really this time) laguna UART config ... Properly terminate the correct platform resource for laguna UARTs Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33721	2012-10-11 09:51:35 +00:00
Imre Kaloz	9b22ca8042	The Gateworks System Controller (GSC) is an i2c device that provides system level monitoring and control of Gateworks boards. It is used on several product families spanning several different target architectures (ixp4xx, cns3xxx, davinci). ... Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33720	2012-10-11 07:59:06 +00:00
Imre Kaloz	31c2f1a4d2	fix non terminated uart resources for laguna ... Resolves crashes when probing multiple serial devices Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33719	2012-10-11 07:47:27 +00:00
Florian Fainelli	bc3b111cfd	generate vmlinux.srec and vmlinux.bin from srec2bin ... Useful for loading the kernel into RAM using ADAM2/PSPBoot. SVN-Revision: 33718	2012-10-11 06:45:07 +00:00
Felix Fietkau	d0ec348ded	kernel: fq_codel: dont reinit flow state ... Keep fq_codel flow state around after queue empty. SVN-Revision: 33687	2012-10-10 11:54:31 +00:00
Felix Fietkau	f933719138	kernel: dont delay acks after ECN CE ... Bugfix from linux head - don't delay acks from ECN congestion experienced in some situations. SVN-Revision: 33686	2012-10-10 11:54:27 +00:00
Felix Fietkau	85871f283a	cns3xxx: Fix GPIO configuration for Gateworks Laguna boards ... The Laguna boards do not use all the same pins for SDHCI as the Cavium reference board. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33684	2012-10-10 11:39:02 +00:00
Felix Fietkau	6bb7409e5a	cns3xxx: Fix laguna arm11mpcore watchdog ... The ARM11MPCore Timer/Watchdog registers start at offset 0x600 which is where all mpcore-wdt boards point the driver base too. I believe this is wrong because 0x600 is aliased to the timer/watchdog of the 'current CPU' where 0x700 is CPU0's timer/watchdog, and 0x800 is CPU1's timer/watchdog. Thus if your timer/watchdog application is switching between CPU's it can end up writing to the wrong CPU's registers which results in random board resets from watchdog timeouts etc. This patch forces the timer/watchdog driver to use CPU0's registers always. Its my opinion that other mpcore-wdt boards should be doing the same thing. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33683	2012-10-10 11:38:58 +00:00
Felix Fietkau	f570c806ef	mtd: allow partial block unlock ... This allows sysupgrade for devices such as the Gateworks Avila/Cambria product families based on the ixp4xx using the redboot bootloader with combined FIS directory and RedBoot config partitions on larger FLASH devices with larger eraseblocks. This second iteration of this patch addresses previous issues: - whitespace breakage fixed - unlock in all scenarios - simplification and fix logic bug Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33681	2012-10-10 11:38:44 +00:00
Felix Fietkau	cae6f4ddb4	ixp4xx: enable OPTIMIZE_FOR_SIZE ... Enabling OPTIMIZE_FOR_SIZE cuts the kernel binary down by 50K which is critical for some small-footprint boards. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33679	2012-10-10 11:38:28 +00:00
Felix Fietkau	f14b8d43f2	ixp4xx: add missing reboot handlers (fixes #11577) ... SVN-Revision: 33672	2012-10-09 15:38:55 +00:00
Felix Fietkau	856fba88d9	x86: remove the reboot=bios command line parameter (#12193) ... SVN-Revision: 33671	2012-10-09 15:20:11 +00:00
Jonas Gorski	fbe0af3237	bcm63xx: remove bcm_tag usage in kernel ... Fixes #12292. SVN-Revision: 33670	2012-10-09 08:08:49 +00:00
Jonas Gorski	6a000ba37a	bcm63xx: fix 963281TAN image names ... it's a 6328, not a 6348. SVN-Revision: 33665	2012-10-08 13:08:40 +00:00
Jonas Gorski	997ace7e5e	firmware-utils: move bcm_tag.h here ... Since there is only one user of bcm_tag.h left, we can safely move it into the firmware-utils directory, replacing the symlink. SVN-Revision: 33655	2012-10-08 09:59:50 +00:00
Jonas Gorski	f16ea6be3f	bcm63xx: fix entering failsafe through button ... gpio_keys_polled needs to be loaded in preinit for buttons to work for entering failsafe. SVN-Revision: 33653	2012-10-08 09:59:44 +00:00
Felix Fietkau	e5bb1a1bc7	cns3xxx: add sysupgrade support ... Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/cns3xxx/base-files/lib/cns3xxx.sh | 22 ++ target/linux/cns3xxx/base-files/lib/upgrade/platform.sh | 122 ++++++++++++++++ target/linux/cns3xxx/image/Makefile | 19 +- 3 files changed, 159 insertions(+), 4 deletions(-) SVN-Revision: 33650	2012-10-07 23:24:02 +00:00
Felix Fietkau	68449e2e01	cns3xxx: add GW2383 board support ... Add GPIO/LED support for Gateworks GW2383 Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/cns3xxx/patches-3.3/300-laguna_support.patch | 18 +++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) SVN-Revision: 33649	2012-10-07 23:23:58 +00:00
Felix Fietkau	6b778f57aa	cns3xxx: fix gpio access and add gpio IRQ support ... Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/cns3xxx/patches-3.3/470-gpio_irq.patch | 536 ++++++++++++++++++++ 1 file changed, 536 insertions(+) SVN-Revision: 33648	2012-10-07 23:23:52 +00:00
Felix Fietkau	bca070dfbe	ixp4xx: update Gateworks Avila board support ... Several new features for newer boards: - add additional UARTs present on some boards - add additional LEDs present on some boards - add HSS audio device codec present on some boards - add support for GSC present on some boards - add per model setup support for newer boards - set FLASH window per-model for boards with larger FLASH Some fixes: - add IRQ mapping for additional PCI devices (USB Host) Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33647	2012-10-07 23:23:47 +00:00
Felix Fietkau	22b86fec7c	ixp4xx: patch cleanup ... roll all avila patches into a single patch (no code changes) Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33646	2012-10-07 23:23:43 +00:00
Felix Fietkau	d660734a1b	ixp4xx: Add HSS audio driver for Avila product family ... Add ixp4xx HSS audio driver for Avila Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33645	2012-10-07 23:23:39 +00:00
Felix Fietkau	ce692ed043	ixp4xx: update Gateworks Cambria board support ... Several new features for newer boards: - add irq mapping for additional devices - add platform data for i2c bus to SFP modules - add additional UARTs present on some boards - increased R/W delay for expansion bus UARTs - add additional LEDs present on some boards - add GPIO exports and configuration - add ENET switch config present on some boards - add support for GSC present on some boards - added per model setup support for newer boards Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33644	2012-10-07 23:23:34 +00:00
Felix Fietkau	21d182b9e5	ixp4xx: patch cleanup ... roll all cambria patches into a single patch (no code changes) Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33643	2012-10-07 23:23:29 +00:00
Felix Fietkau	d3567cc886	ixp4xx: split out new UART I/O to its own patch ... This is being done for general cleanup Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33642	2012-10-07 23:23:25 +00:00
Felix Fietkau	1abbe676d1	x86: rename the iso file to openwrt-x86-generic.iso ... SVN-Revision: 33641	2012-10-07 23:05:39 +00:00
Felix Fietkau	0dd7644ec7	x86: remove grub-legacy ... SVN-Revision: 33640	2012-10-07 23:01:56 +00:00
Felix Fietkau	a1bcd25082	x86: add grub2 iso support ... SVN-Revision: 33639	2012-10-07 23:01:52 +00:00
Felix Fietkau	53cc34e517	x86/generic: enable cdrom + iso9660 support ... SVN-Revision: 33638	2012-10-07 23:01:47 +00:00
Gabor Juhos	befb648642	ar71xx: build image for the TL-WR841N/ND v8 ... SVN-Revision: 33623	2012-10-04 20:16:06 +00:00
Gabor Juhos	02a85dfd85	ar71xx: user-space support for TL-WR841N/ND v8 ... SVN-Revision: 33622	2012-10-04 20:16:05 +00:00
Gabor Juhos	196c6c5b45	ar71xx: add support for the TL-WR841N/ND v8 board ... SVN-Revision: 33621	2012-10-04 20:16:03 +00:00
Hauke Mehrtens	07234dc8bd	bcma: do not initialize deactivated PCIe cores ... Before it was tried to initialize the deactivated PCIe core in client mode, but this causes the SoC to hang. Just do not initialize it at all and ignore the core it is not working and nothing is connected to it when the specific bit is set in the boardflags. SVN-Revision: 33620	2012-10-04 15:45:54 +00:00
Hauke Mehrtens	2819890839	use memcmp in mem size detection as suggested by blogic ... SVN-Revision: 33619	2012-10-04 15:42:12 +00:00
Florian Fainelli	5e0df9582b	fix typo in 05_set_ether_mac_rdc preinit script (#11166) ... SVN-Revision: 33618	2012-10-04 12:36:50 +00:00
Gabor Juhos	d832cd11f8	ramips: add image for ALL0256N-8M ... The new version of the ALL0256N now got 8MB SPI NOR flash instead of 4MB. In order to expose the whole amount of flash, add another image which contains the corresponding GENERIC_8M mtdparts. [juhosg: change suffix from '8m' to '8M'] Patch by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33614	2012-10-04 06:34:09 +00:00
Florian Fainelli	47c5c4df1c	add Default and Gumstix PXA profiles ... Gumstix builds a fake flash image for usage in qemu SVN-Revision: 33609	2012-10-03 16:15:05 +00:00
Florian Fainelli	48daf407a6	advertise jffs2 feature ... SVN-Revision: 33607	2012-10-03 16:12:57 +00:00
Florian Fainelli	bb7ac8ae7d	remove broken flag ... SVN-Revision: 33606	2012-10-03 16:12:39 +00:00