Difuse/difos
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 2
64969 commits 5 branches 19 tags 1.2 GiB
Commit graph

7 commits

Author SHA1 Message Date
Rosen Penev
f955716341 ramips: fix wifi nodes to upstream standards 
Replaced all mt76@ with wifi@ per upstream requirement for all wifi
nodes.

Added missing compatible string where appropriate as stated by mt76.yaml
upstream.

Also updated reg value to be consistent everywhere.

Replace all pci14c3 entries to use mediatek,mt76.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19067
Signed-off-by: Robert Marko <robimarko@gmail.com>
 2025-07-04 22:01:40 +02:00
Mieczyslaw Nalewaj
a238170e57 treewide: strip trailing whitespace 
Strip trailing whitespace in all code:
find . -type f | grep "\.c$" | xargs sed -i 's/[ \t]\+$//'
find . -type f | grep "\.h$" | xargs sed -i 's/[ \t]\+$//'
find . -type f | grep "\.dts$" | xargs sed -i 's/[ \t]\+$//'
find . -type f | grep "\.dtsi$" | xargs sed -i 's/[ \t]\+$//'

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/18626
Signed-off-by: Robert Marko <robimarko@gmail.com>
 2025-05-20 00:47:37 +02:00
Shiji Yang
8940cc3919 ramips: dts: remove redundant console bootargs 
`bootargs = "console=ttyS0,57600";` is already defined on all
ramips target SoCs' dtsi. We don't need to override it with the
same value.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/18303
Signed-off-by: Robert Marko <robimarko@gmail.com>
 2025-03-26 09:50:42 +01:00
Rosen Penev
648d070c76 linux: replace nvmem-cells with nvmem-layout 
The former is deprecated in favor of nvmem-layout. In preparation for
eventual removal from the kernel, do so here.

Some of these are leftovers from nvmem-layout conversion.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16097
Signed-off-by: Robert Marko <robimarko@gmail.com>
 2024-12-27 13:34:58 +01:00
Shiji Yang
73eeac49be ramips: limit max spi clock frequency to 50 MHz 
In the past few years, we have received several reports about SPI
Flash not working properly. This is caused by excessively fast
clock frequency. It's really annoying to fix them one by one. Let's
reduce these aggressive frequencies to 50 MHz. This is a safe and
suggested value in the vendor SDK.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
 2024-07-10 12:20:35 +02:00
Shiji Yang
05aec66d53 ramips: fix MAC address for some devices 
1. Remove unused macaddr NVMEM cells.
2. Fix "mac-base" compatible cells references.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
 2024-06-15 22:54:52 +02:00
Radito Wahyu
5aca47bca1 ramips: add support for BOLT BL100 
BL100 is a router made by Bolt by a provider in Indonesia
The original firmware created using Mediatek SDK and kernel 2.6.36

- Chipset: MediaTek MT7620A ver 2, eco 6
- RAM: 64 MB
- Bootloader: U Boot
- Flash: Winbond W25Q128BV (16 MB)
- Ports: 2x 10/100 Ethernet, 1x RJ-11 VoIP
- Modem: Qualcomm LTE B40 (2300 Mhz) VID:05c6 PID:9026
- Wireless: Internal MT7620A (2.4 Ghz) & Mediatek MT76x2E (5.8 Ghz)
- Switch: MediaTek MT7620A built-in 5-port 10/100M switch
- Voltage: DC 12V 1A
- Antenna Port: 2x External Antenna, 2 LTE U.FL, 2 WiFi U.FL
- Serial Port: Yes, 3.3 V TTL, Baud 57600 8N1
- Buttons: Reset and WPS
- LED: 15 Total
  - 4 blue lte, 2 red lte, 1 reset, 1 power.
  - 1 wps, 1 voip, 1 wlan2, 1 wlan5, 1 lan, 1 wan, 1 wlan.

Installation via stock firmware
1. Unlock Telnet access by downloading the backup .tar.gz file
2. Change the Telnet configuration to LAN_Telnet=1
3. Import backup configuration
4. Restart the router
5. Login to telnet with username and password = admin : db40
6. Download sysupgrade binary and mtd_write to the kernel partition
`mtd_write write openwrt-bolt_bl100-squashfs-sysupgrade.bin Kernel`

Signed-off-by: Radito Wahyu <arditogits@gmail.com>
 2024-03-31 20:07:45 +02:00