Commit graph

8 commits

Author SHA1 Message Date
Daniel Golle
a387c62114 mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi
Upstream uses a different filename, so lets rename our downstream
mt7981.dtsi to mt7981b.dtsi and update the device tree of all
MT7981 boards accordingly.
This is to prepare for the switch to Linux 6.12 which is going to
use the upstream mt7981b.dtsi (plus some patches on top).

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2025-05-26 16:58:03 +01:00
Daniel Golle
a51fd20e0d mediatek: filogic: PHY LEDs do have an address, gpio-leds don't
Other than GPIO LEDs, PHY LEDs do have an address.

Fix node names such that all gpio-leds do *not* contain an '@' sign and
PHY leds which do have an address also do contain the '@' sign.

This is done to prevent more copy&paste'ry of non-complaint DT
fragments.

Fixes: 7cbe34170e ("mediatek: add support for the GL.iNet GL-MT3000")
Fixes: fe10f97439 ("filogic: add support for GL.iNet GL-MT6000")
Fixes: e8f7597317 ("mediatek: filogic: add support for Cudy RE3000 v1")
Fixes: c9cb6411c1 ("mediatek: add support for Cudy WR3000 v1")
Fixes: 7560af7647 ("mediatek: filogic: migrate ASUS TUF AX6000 to upstream PHY LED control")
Fixes: 25ea7ff393 ("mediatek: filogic: migrate Acer W6/W6d to upstream PHY LED control")
Fixes: d50d51d74e ("mediatek: filogic: migrate Zyxel NWA50AX Pro to upstream PHY LED control")
Fixes: b88de5d507 ("mediatek: filogic: migrate Zyxel EX5700 to upstream PHY LED control")
Fixes: 63d56af6c6 ("mediatek: filogic: migrate Netgate N60 to upstream PHY LED control")
Fixes: fd76a38190 ("mediatek: filogic: migrate SmartRG Bonanza to upstream PHY LED control")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2025-03-21 01:19:19 +00:00
Rosen Penev
6ff598306f
treewide: gpio to gpios
gpio is deprecated. Found with dtc's -Wdeprecated_gpio_property

Used git grep -E $'\tgpio = <' to make the changes.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15681
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-06-17 12:57:06 +02:00
Rosen Penev
3eb899fd36
mediatek: use mac-base
mac-address-increment is deprecated.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-11-25 23:45:26 +01:00
Rosen Penev
405bc5be13
mediatek: convert to nvmem-layout
Will allow removing mac-address-increment.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-11-25 23:45:26 +01:00
David Bauer
ae500e62e2 mediatek: add label-mac for GL.iNet GL-MT3000
The MAC-address of gmac0 matches the one printed on the bottom label.

Signed-off-by: David Bauer <mail@david-bauer.net>
2023-11-03 23:06:33 +01:00
Chen Minqiang
36746893ac mediatek: fix the name of buswidth to bus-width
Fix the issue of dts buswidth cannot be applied properly with spi driver.
Fix the name of buswidth to bus-width in dts in order to fit the format
in linux spi kernel[1] so that spi-tx-bus-width & spi-rx-bus-width can be
parsed properly.

[1] Documentation/devicetree/bindings/spi/spi-controller.yaml

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
2023-09-05 15:40:43 +08:00
Daniel Golle
7cbe34170e mediatek: add support for the GL.iNet GL-MT3000
The MT-3000 is a pocket-sized Wi-Fi 6 router based on MediaTek MT7981.

Specification:
 - SoC: MediaTek MT7981B
 - CPU: 2x 1.3 GHz Cortex-A53
 - Flash: 256 MiB Macronix SPI NAND
 - RAM: 512 MiB Nanya DDR4
 - WLAN: 2.4 GHz, 5 GHz (MediaTek MT7976CN)
 - Ethernet:
    - 1x 10/100/1000 Mbps built-in PHY (LAN)
    - 1x 10/100/1000/2500 Mbps MaxLinear GPY211 PHY (WAN)
 - USB 3.0 port
 - Buttons: 1 button, 1 switch
 - LEDs: 1x light-blue, 1x warm-white
 - Serial console: internal 4-pin header, 115200 8n1
 - PWM controlled fan with tacho
 - Power: 5 VDC, 3 A (USB Type-C)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-05-18 02:41:49 +01:00