The direction needs to be included in the IOCTL call.
Fixes: b91d7d9d78 ("ltq-*-app: extend ubus metrics/statistics")
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://github.com/openwrt/openwrt/pull/19363
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
glibc 2.39 has removed libcrypt completely.
solution: link against libxcrypt built with glibc compatibility.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19293
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
glibc 2.39 has removed libcrypt completely.
solution: link against libxcrypt built with glibc compatibility.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19293
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
glibc 2.39 has removed libcrypt completely.
solution: link against libxcrypt built with glibc compatibility.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19293
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Upstream has disabled SHA-1 algorithms by default since version 2025.87.
SHA-1 has known weakness and most SSH implementations support alternatives.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
It's hard or even impossible to track affected sources
so it's safe to remove all built objects (if any).
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
This allows to fine-tune dropbear build options.
This change is heavily based on similar work done by Marius Dinu earlier
so I'd like to say many thanks to original author.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
- update dropbear to latest stable 2025.88;
for the changes see https://matt.ucc.asn.au/dropbear/CHANGES
- rewrite 100-pubkey_path.patch
- refresh remaining patches
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Correctly load the list of basic_rates from UCI. basic-rates shall be
stored as a option-list. The current code did not retrieve this list
correctly.
wpa_supplicant uses a different config option to set basic-rates
when operating in mesh-mode.
Use the correct config key and calculation for mesh-interfaces.
Signed-off-by: David Bauer <mail@david-bauer.net>
The upstream submission for this mandates the node to be named wifi
instead of wmac. Change all ath79 entries to match the new names and
remove the compatibility patch.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19328
Signed-off-by: Robert Marko <robimarko@gmail.com>
nl80211 events were propagated to the wrong interfaces
Fixes: 2ac791e87d ("hostapd: update to version 2025-06-27")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Manually refreshed:
140-tests-Makefile-make-run-tests-with-CONFIG_TLS.patch
601-ucode_support.patch
Fixed in upstream:
804-hostapd-revert-ACS-Validate-6-GHz-AP-criteria-before.patch [1]
Automatically rebased all other patches.
[1] https://w1.fi/cgit/hostap/commit/?id=0b60826a66885bffa2fd709ed5e48cd5fe241b6b
Signed-off-by: Agustin Lorenzo <agustin.lorenzo@thinco.es>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
802.11be capable platforms are big enough to not need the mini variant,
and removing it here saves space for other other devices.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Override via RSNE is a relatively new feature, which can be used to enable
WPA3 features in a way that is invisible to older clients.
Use it by default to mask the GCMP-256 cipher from older clients, since
there are compatibility issues with existing devices.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fixes status information and scanning on extra BSS interfaces when operating
on multi-radio devices.
Reported-by: Chad Monroe <chad.monroe@adtran.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ensure that hapd->own_addr is set properly, since hostapd_setup_bss
only handles it for secondary BSS interfaces
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Glibc since 2.41 tries to include linux/sched/types.h from sched.h, and
pointing KERNEL_INCLUDE to the kernel headers makes it use
linux/sched/types.h from the kernel headers instead of the installed
one.
This then breaks the configure (test) compile for setns() and the test:
mips-openwrt-linux-gnu-gcc -I/fork.openwrt/build_dir/target-mips_24kc_glibc/linux-ath79_generic/linux-6.6.93/include/uapi -o config.HaAJYe/setnstest config.HaAJYe/setnstest.c
In file included from /fork.openwrt/build_dir/target-mips_24kc_glibc/linux-ath79_generic/linux-6.6.93/include/uapi/linux/sched/types.h:5,
from /fork.openwrt/staging_dir/toolchain-mips_24kc_gcc-14.3.0_glibc/include/bits/sched.h:63,
from /fork.openwrt/staging_dir/toolchain-mips_24kc_gcc-14.3.0_glibc/include/sched.h:43,
from config.HaAJYe/setnstest.c:2:
/fork.openwrt/build_dir/target-mips_24kc_glibc/linux-ath79_generic/linux-6.6.93/include/uapi/linux/types.h:10:2: warning: #warning "Attempt to use kernel headers from user space, see https://kernelnewbies.org/KernelHeaders" [-Wcpp]
10 | #warning "Attempt to use kernel headers from user space, see https://kernelnewbies.org/KernelHeaders"
| ^~~~~~~
In file included from /fork.openwrt/build_dir/target-mips_24kc_glibc/linux-ath79_generic/linux-6.6.93/include/uapi/linux/posix_types.h:5,
from /fork.openwrt/build_dir/target-mips_24kc_glibc/linux-ath79_generic/linux-6.6.93/include/uapi/linux/types.h:14:
/fork.openwrt/build_dir/target-mips_24kc_glibc/linux-ath79_generic/linux-6.6.93/include/uapi/linux/stddef.h:5:10: fatal error: linux/compiler_types.h: No such file or directory
5 | #include <linux/compiler_types.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Fix this by pointing KERNEL_INCLUDE to the toolchain headers, which
include the installed kernel headers.
Tested with musl, glibc, and SDK.
Fixes: 60738feded ("iproute2: Fix KERNEL_INCLUDE in SDK")
Reported-by: Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Add a patch in order to fix it.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18600
Signed-off-by: Robert Marko <robimarko@gmail.com>
Backport two patches in order to fix it.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18600
Signed-off-by: Robert Marko <robimarko@gmail.com>
The plumbing is there in the ucode files to set the parameter using
nl80211. However, the option is never forwarded because it was missing
in mac80211.sh. Add it there and in the schema file.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Link: https://github.com/openwrt/openwrt/pull/19030
Signed-off-by: Robert Marko <robimarko@gmail.com>
61ae5732adea iprule: amend ipproto netlink nla_put_u32 to nla_put_u8
d610d68c71b8 device: add support for configuring vrf
a1b6386a20a6 device: fix bonding primary port selection
e8bbf246ce2e system-linux: fix sysfs name for all_ports_active flag
723c699e84f4 Restore disable_ipv6 sysctl after removing a device from bridge or bond
d476e18e8d43 iprule: resolve ipproto by name
7901e66c5f27 netifd: iprule add sport and dport
Signed-off-by: Robert Marko <robimarko@gmail.com>
Inverted condition caused wrong value for eht_oper_centr_freq_seg0_idx
get selected in ETH320 mode, causing AP fail to start.
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Link: https://github.com/openwrt/openwrt/pull/18998
Signed-off-by: Robert Marko <robimarko@gmail.com>
Request Softwire46 (S46) [RFC 7598] options when the map and/or ds-lite
packages are installed. This is required as the behaviour of odhcp6c has
changed to not include these OROs by default.
See openwrt/odhcp6c#89
Signed-off-by: Richard Patterson <richard@helix.net.nz>
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
When running ACS on multi-radio devices, ACS on one band can block another.
Increase the number of retries and prevent bouncing interfaces between AP
and STA mode during attempts.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
