diff --git a/package/boot/uboot-envtools/files/qualcommax_ipq50xx b/package/boot/uboot-envtools/files/qualcommax_ipq50xx
index 0e78bb80604..b63451d627f 100644
--- a/package/boot/uboot-envtools/files/qualcommax_ipq50xx
+++ b/package/boot/uboot-envtools/files/qualcommax_ipq50xx
@@ -9,7 +9,8 @@ board=$(board_name)
 
 case "$board" in
 linksys,mx2000|\
-linksys,mx5500)
+linksys,mx5500|\
+linksys,spnmx56)
 	idx="$(find_mtd_index u_env)"
 	[ -n "$idx" ] && \
 		ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x40000" "0x20000"
diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile
index f784d9a2e45..deeda4955e5 100644
--- a/package/firmware/ipq-wifi/Makefile
+++ b/package/firmware/ipq-wifi/Makefile
@@ -45,6 +45,7 @@ ALLWIFIBOARDS:= \
 	linksys_mx5300 \
 	linksys_mx5500 \
 	linksys_mx8500 \
+	linksys_spnmx56 \
 	linksys_whw03 \
 	netgear_lbr20 \
 	netgear_rax120v2 \
@@ -184,6 +185,7 @@ $(eval $(call generate-ipq-wifi-package,linksys_mx4200,Linksys MX4200))
 $(eval $(call generate-ipq-wifi-package,linksys_mx5300,Linksys MX5300))
 $(eval $(call generate-ipq-wifi-package,linksys_mx5500,Linksys MX5500))
 $(eval $(call generate-ipq-wifi-package,linksys_mx8500,Linksys MX8500))
+$(eval $(call generate-ipq-wifi-package,linksys_spnmx56,Linksys SPNMX56))
 $(eval $(call generate-ipq-wifi-package,linksys_whw03,Linksys WHW03))
 $(eval $(call generate-ipq-wifi-package,netgear_lbr20,Netgear LBR20))
 $(eval $(call generate-ipq-wifi-package,netgear_rax120v2,Netgear RAX120v2))
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-spnmx56.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-spnmx56.dts
new file mode 100644
index 00000000000..75b94445140
--- /dev/null
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-spnmx56.dts
@@ -0,0 +1,240 @@
+/dts-v1/;
+
+#include "ipq5018.dtsi"
+#include "ipq5018-mx-base.dtsi"
+
+/ {
+	model = "Linksys SPNMX56";
+	compatible = "linksys,spnmx56", "qcom,ipq5018";
+};
+
+/*
+* =================================================================
+*     _______________________             _______________________
+*    |        IPQ5018        |           |        QCA8337        |
+*    | +------+   +--------+ |           | +--------+   +------+ |
+*    | | MAC0 |---| GE Phy |-+--- MDI ---+ | Phy4   |---| MAC5 | |
+*    | +------+   +--------+ |           | +--------+   +------+ |
+*    |                       |           |_______________________|
+*    |                       |            _______________________
+*    |                       |           |        QCA8081        |
+*    | +------+   +--------+ |           | +--------+   +------+ |
+*    | | MAC1 |---| Uniphy |-+-- SGMII+--+ | Phy    |---| MAC  | |
+*    | +------+   +--------+ |           | +--------+   +------+ |
+*    |_______________________|           |_______________________|
+*
+* =================================================================
+*/
+
+&switch {
+	status = "okay";
+
+	switch_mac_mode = <MAC_MODE_SGMII_CHANNEL0>;
+
+	qcom,port_phyinfo {
+		// MAC0 -> GE Phy --- MDI --- QCA8337 Switch
+		port@0 {
+			port_id = <1>;
+			mdiobus = <&mdio0>;
+			phy_address = <7>;
+			phy_dac = <0x10 0x10>;
+		};
+
+		// MAC1 -> Uniphy --- SGMII --- QCA8081
+		port@1 {
+			port_id = <2>;
+			mdiobus = <&mdio1>;
+			phy_address = <28>;
+			port_mac_sel = "QGMAC_PORT";
+		};
+	};
+};
+
+// MAC0 -> GE Phy
+&dp1 {
+	status = "okay";
+};
+
+// MAC1 ---SGMII---> QCA8081
+&dp2 {
+	status = "okay";
+
+	label = "wan";
+	phy-handle = <&qca8081>;
+};
+
+&mdio0 {
+	status = "okay";
+};
+
+// IPQ5018 GE Phy -> QCA8337 PHY4
+&ge_phy {
+	qcom,dac = <0x10 0x10>;
+};
+
+&mdio1 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio1_pins>;
+	pinctrl-names = "default";
+	reset-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
+
+	// Not connected
+	qca8337_0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	// QCA8337 Phy1 -> LAN1
+	qca8337_1: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	// QCA8337 Phy2 -> LAN2
+	qca8337_2: ethernet-phy@2 {
+		reg = <2>;
+	};
+
+	// QCA8337 Phy3 -> LAN3
+	qca8337_3: ethernet-phy@3 {
+		reg = <3>;
+	};
+
+	// QCA8337 Phy4 -> MDI -> IPQ5018 GE PHY
+	qca8337_4: ethernet-phy@4 {
+		reg = <4>;
+	};
+
+	// QCA8081 Phy -> WAN
+	qca8081: ethernet-phy@28 {
+		compatible = "ethernet-phy-id004d.d101";
+		reg = <28>;
+		reset-deassert-us = <10000>;
+		reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+	};
+
+	// QCA8337 switch
+	switch1: ethernet-switch@17 {
+		compatible = "qca,qca8337";
+		reg = <17>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+				phy-handle = <&qca8337_1>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+				phy-handle = <&qca8337_2>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan1";
+				phy-handle = <&qca8337_3>;
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-handle = <&qca8337_4>;
+				phy-mode = "gmii";
+				ethernet = <&dp1>;
+			};
+		};
+	};
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+
+	perst-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi@1,0 {
+			status = "okay";
+
+			/* QCN9074: ath11k lacks DT compatible for PCI cards */
+			compatible = "pci17cb,1104";
+			reg = <0x00010000 0 0 0 0>;
+
+			qcom,ath11k-calibration-variant = "Linksys-SPNMX56";
+		};
+	};
+};
+
+&q6v5_wcss {
+	status = "okay";
+
+	memory-region = <&q6_mem_regions>;
+	firmware-name = "ath11k/IPQ5018/hw1.0/q6_fw.mdt",
+			"ath11k/IPQ5018/hw1.0/m3_fw.mdt";
+	
+	// IPQ5018
+	q6_wcss_pd1: pd-1 {
+		firmware-name = "ath11k/IPQ5018/hw1.0/q6_fw.mdt";
+
+		resets =
+			<&gcc GCC_WCSSAON_RESET>,
+			<&gcc GCC_WCSS_BCR>,
+			<&gcc GCC_CE_BCR>;
+		reset-names =
+			"wcss_aon_reset",
+			"wcss_reset",
+			"ce_reset";
+
+		clocks =
+			<&gcc GCC_WCSS_AHB_S_CLK>,
+			<&gcc GCC_WCSS_ACMT_CLK>,
+			<&gcc GCC_WCSS_AXI_M_CLK>;
+		clock-names =
+			"gcc_wcss_ahb_s_clk",
+			"gcc_wcss_acmt_clk",
+			"gcc_wcss_axi_m_clk";
+
+		interrupts-extended =
+			<&wcss_smp2p_in 8 0>,
+			<&wcss_smp2p_in 9 0>,
+			<&wcss_smp2p_in 12 0>,
+			<&wcss_smp2p_in 11 0>;
+		interrupt-names =
+			"fatal",
+			"ready",
+			"spawn-ack",
+			"stop-ack";
+
+		qcom,smem-states =
+			<&wcss_smp2p_out 8>,
+			<&wcss_smp2p_out 9>,
+			<&wcss_smp2p_out 10>;
+		qcom,smem-state-names =
+			"shutdown",
+			"stop",
+			"spawn";
+	};
+};
+
+&wifi0 {
+	// IPQ5018
+	qcom,rproc = <&q6_wcss_pd1>;
+	qcom,ath11k-calibration-variant = "Linksys-SPNMX56";
+	qcom,ath11k-fw-memory-mode = <2>;
+	qcom,bdf-addr = <0x4c400000>;
+
+	status = "okay";
+};
diff --git a/target/linux/qualcommax/image/ipq50xx.mk b/target/linux/qualcommax/image/ipq50xx.mk
index affd5e63451..cf404d49cde 100644
--- a/target/linux/qualcommax/image/ipq50xx.mk
+++ b/target/linux/qualcommax/image/ipq50xx.mk
@@ -29,3 +29,13 @@ define Device/linksys_mx5500
 		ipq-wifi-linksys_mx5500
 endef
 TARGET_DEVICES += linksys_mx5500
+
+define Device/linksys_spnmx56
+	$(call Device/linksys_ipq50xx_mx_base)
+	DEVICE_MODEL := SPNMX56
+	DEVICE_DTS_CONFIG := config@mp03.1
+	DEVICE_PACKAGES := kmod-ath11k-pci \
+		ath11k-firmware-qcn9074 \
+		ipq-wifi-linksys_spnmx56
+endef
+TARGET_DEVICES += linksys_spnmx56
diff --git a/target/linux/qualcommax/ipq50xx/base-files/etc/board.d/02_network b/target/linux/qualcommax/ipq50xx/base-files/etc/board.d/02_network
index 35bff6df80e..c80b259d27f 100644
--- a/target/linux/qualcommax/ipq50xx/base-files/etc/board.d/02_network
+++ b/target/linux/qualcommax/ipq50xx/base-files/etc/board.d/02_network
@@ -8,7 +8,8 @@ ipq50xx_setup_interfaces()
 	local board="$1"
 	case $board in
 	linksys,mx2000|\
-	linksys,mx5500)
+	linksys,mx5500|\
+	linksys,spnmx56)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
 		;;
 	esac
@@ -23,7 +24,8 @@ ipq50xx_setup_macs()
 
 	case "$board" in
 	linksys,mx2000|\
-	linksys,mx5500)
+	linksys,mx5500|\
+	linksys,spnmx56)
 		label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
 		lan_mac=$label_mac
 		wan_mac=$label_mac
diff --git a/target/linux/qualcommax/ipq50xx/base-files/etc/hotplug.d/firmware/11-ath11k-caldata b/target/linux/qualcommax/ipq50xx/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
index 7c8cc99ee3d..4da2f2809ef 100644
--- a/target/linux/qualcommax/ipq50xx/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
+++ b/target/linux/qualcommax/ipq50xx/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
@@ -10,7 +10,8 @@ case "$FIRMWARE" in
 "ath11k/IPQ5018/hw1.0/cal-ahb-c000000.wifi.bin")
 	case "$board" in
 	linksys,mx2000|\
-	linksys,mx5500)
+	linksys,mx5500|\
+	linksys,spnmx56)
 		caldata_extract "0:ART" 0x1000 0x20000
 		label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
 		ath11k_patch_mac $(macaddr_add $label_mac 1) 0
@@ -32,7 +33,8 @@ case "$FIRMWARE" in
 	;;
 "ath11k/QCN9074/hw1.0/cal-pci-0001:01:00.0.bin")
 	case "$board" in
-	linksys,mx5500)
+	linksys,mx5500|\
+	linksys,spnmx56)
 		caldata_extract "0:ART" 0x26800 0x20000
 		label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
 		ath11k_patch_mac $(macaddr_add $label_mac 2) 0
diff --git a/target/linux/qualcommax/ipq50xx/base-files/etc/init.d/bootcount b/target/linux/qualcommax/ipq50xx/base-files/etc/init.d/bootcount
index b570428aef0..c49ad8472de 100755
--- a/target/linux/qualcommax/ipq50xx/base-files/etc/init.d/bootcount
+++ b/target/linux/qualcommax/ipq50xx/base-files/etc/init.d/bootcount
@@ -5,7 +5,8 @@ START=99
 boot() {
 	case $(board_name) in
 	linksys,mx2000|\
-	linksys,mx5500)
+	linksys,mx5500|\
+	linksys,spnmx56)
 		mtd resetbc s_env || true
 	;;
 	esac
diff --git a/target/linux/qualcommax/ipq50xx/base-files/lib/upgrade/platform.sh b/target/linux/qualcommax/ipq50xx/base-files/lib/upgrade/platform.sh
index a75b6798d25..5144617f8b8 100644
--- a/target/linux/qualcommax/ipq50xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/qualcommax/ipq50xx/base-files/lib/upgrade/platform.sh
@@ -73,7 +73,8 @@ platform_check_image() {
 platform_do_upgrade() {
 	case "$(board_name)" in
 	linksys,mx2000|\
-	linksys,mx5500)
+	linksys,mx5500|\
+	linksys,spnmx56)
 		remove_oem_ubi_volume rootfs
 		linksys_mx_do_upgrade "$1"
 		;;