bmips: bcm6358: add support for Huawei HG553
Specifications: - SoC: Broadcom BCM6358 dual 300MHz MIPS - Flash: 16MB NOR - RAM: 64MB DDR - Ethernet: 4x 100M - Wifi: Broadcom BCM4318 - 2x USB 2.0 port - 2x Button - 9x LED - RJ11 2x FXS VoIP (unsupported) - RJ11 xDSL (unsupported) Install instructions: - Assign static IP 192.168.1.100 to PC. - Unplug the power source. - Press the RESTART button at the router, don't release it yet! - Plug the power source and wait at least 15 seconds. - Release the RESTART button. - Browse to http://192.168.1.1 with your PC. - Upload the openwrt-bmips-bcm6358-huawei_hg553-squashfs-cfe.bin file. - Wait some minutes until the firmware upgrade completes. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This commit is contained in:
Álvaro Fernández Rojas
parent
2492ca3fdd
commit
fd3e1f0c4d
4 changed files with 245 additions and 0 deletions
|
|
@ -6,6 +6,11 @@
|
|||
board_config_update
|
||||
|
||||
case "$(board_name)" in
|
||||
huawei,hg553)
|
||||
ucidef_set_led_netdev "lan" "LAN" "blue:lan" "br-lan"
|
||||
ucidef_set_led_netdev "wlan" "WLAN" "blue:wlan" "phy0-ap0"
|
||||
ucidef_set_led_usbport "usb" "USB" "blue:hspa" "usb1-port2" "usb2-port2"
|
||||
;;
|
||||
huawei,hg556a-a |\
|
||||
huawei,hg556a-b |\
|
||||
huawei,hg556a-c)
|
||||
|
|
|
|||
|
|
@ -5,6 +5,7 @@
|
|||
board_config_update
|
||||
|
||||
case "$(board_name)" in
|
||||
huawei,hg553 |\
|
||||
huawei,hg556a-a |\
|
||||
huawei,hg556a-b |\
|
||||
huawei,hg556a-c)
|
||||
|
|
|
|||
226
target/linux/bmips/dts/bcm6358-huawei-hg553.dts
Normal file
226
target/linux/bmips/dts/bcm6358-huawei-hg553.dts
Normal file
|
|
@ -0,0 +1,226 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include "bcm6358.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Huawei EchoLife HG553";
|
||||
compatible = "huawei,hg553", "brcm,bcm6358";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_blue;
|
||||
led-failsafe = &led_power_red;
|
||||
led-running = &led_power_blue;
|
||||
led-upgrade = &led_power_blue;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <100>;
|
||||
|
||||
rfkill {
|
||||
label = "rfkill";
|
||||
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power_blue: led-4 {
|
||||
function = LED_FUNCTION_POWER;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_red: led-5 {
|
||||
function = LED_FUNCTION_POWER;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-12 {
|
||||
label = "red:hspa";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-13 {
|
||||
label = "blue:hspa";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-22 {
|
||||
function = LED_FUNCTION_LAN;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-23 {
|
||||
function = LED_FUNCTION_LAN;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-25 {
|
||||
function = LED_FUNCTION_WLAN;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-34 {
|
||||
label = "red:dsl";
|
||||
gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-35 {
|
||||
label = "blue:dsl";
|
||||
gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
bcm4318-sprom {
|
||||
compatible = "brcm,ssb-sprom";
|
||||
|
||||
pci-bus = <0>;
|
||||
pci-dev = <1>;
|
||||
|
||||
nvmem-cells = <&macaddr_cfe_6a0 1>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
brcm,sprom = "brcm/bcm4318-sprom.bin";
|
||||
};
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðernet1 {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&macaddr_cfe_6a0 0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
phy-mode = "mii";
|
||||
|
||||
fixed-link {
|
||||
speed = <100>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&iudma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
switch@1e {
|
||||
compatible = "brcm,bcm5325";
|
||||
reg = <30>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "lan1";
|
||||
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan2";
|
||||
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan3";
|
||||
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan4";
|
||||
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
port@5 {
|
||||
reg = <5>;
|
||||
label = "cpu";
|
||||
|
||||
phy-mode = "internal";
|
||||
ethernet = <ðernet1>;
|
||||
|
||||
fixed-link {
|
||||
speed = <100>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pflash {
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "cfe";
|
||||
reg = <0x000000 0x020000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_cfe_6a0: macaddr@6a0 {
|
||||
compatible = "mac-base";
|
||||
reg = <0x6a0 0x6>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
label = "firmware";
|
||||
reg = <0x020000 0xfc0000>;
|
||||
compatible = "brcm,bcm963xx-imagetag";
|
||||
};
|
||||
|
||||
partition@fe0000 {
|
||||
label = "nvram";
|
||||
reg = <0xfe0000 0x020000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -1,5 +1,18 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
define Device/huawei_hg553
|
||||
$(Device/bcm63xx-cfe-legacy)
|
||||
DEVICE_VENDOR := Huawei
|
||||
DEVICE_MODEL := EchoLife HG553
|
||||
CHIP_ID := 6358
|
||||
CFE_BOARD_ID := HW553
|
||||
CFE_EXTRAS += --rsa-signature "EchoLife_HG553" --tag-version 7
|
||||
BLOCKSIZE := 0x20000
|
||||
DEVICE_PACKAGES += $(USB2_PACKAGES) $(B43_PACKAGES) \
|
||||
kmod-leds-gpio
|
||||
endef
|
||||
TARGET_DEVICES += huawei_hg553
|
||||
|
||||
define Device/huawei_hg556a-a
|
||||
$(Device/bcm63xx-cfe-legacy)
|
||||
DEVICE_VENDOR := Huawei
|
||||
|
|
|
|||
Loading…
Reference in a new issue