ipq806x: 6.1: replace ZRELADDR HACK patch with new version

With 6.1 lots have changed and the platform for Makefile.boot got
dropped. Replace the patch with a new version that is alligned to the
new implementation.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

target/linux/ipq806x/patches-6.1/0060-ARM-mach-qcom-fix-support-for-ipq806x.patch

@@ -0,0 +1,67 @@
+From 9c896e9fc2ef1209e4a56d8c9fdd183847c2c814 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Tue, 18 Oct 2022 22:02:46 +0200
+Subject: [PATCH] ARM: mach-qcom: fix support for ipq806x
+
+Add a specific config flag for Qcom IPQ806x as this SoC can't use
+AUTO_ZRELADDR and require the PHYS_OFFSET set to 0x42000000.
+
+This is needed as some legacy board (or some wrongly configured
+bootloader) pass the wrong memory map and doesn't exclude the first
+~20MB of RAM reserved for the hardware network accellerators.
+
+With this change we can correctly support each board and prevent any
+kind of misconfiguration done by the OEM.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+---
+ arch/arm/Kconfig           |  3 ++-
+ arch/arm/mach-qcom/Kconfig | 13 +++++++++++++
+ 2 files changed, 15 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
+index 1af63e17b4ad..0818d35973ad 100644
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -282,6 +282,7 @@ config PHYS_OFFSET
+ 	default 0x30000000 if ARCH_S3C24XX
+ 	default 0xa0000000 if ARCH_IOP32X || ARCH_PXA
+ 	default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100
++	default 0x42000000 if ARCH_IPQ806X
+ 	default 0
+ 	help
+ 	  Please provide the physical address corresponding to the
+@@ -1701,7 +1702,7 @@ config CRASH_DUMP
+ 
+ config AUTO_ZRELADDR
+ 	bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM
+-	default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
++	default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100 || ARCH_IPQ806X)
+ 	help
+ 	  ZRELADDR is the physical address where the decompressed kernel
+ 	  image will be placed. If AUTO_ZRELADDR is selected, the address
+diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
+index 12a812e61c16..b11b6e391ff0 100644
+--- a/arch/arm/mach-qcom/Kconfig
++++ b/arch/arm/mach-qcom/Kconfig
+@@ -46,4 +46,17 @@ config ARCH_MDM9615
+ 	bool "Enable support for MDM9615"
+ 	select CLKSRC_QCOM
+ 
++config ARCH_IPQ806X
++	bool "Enable support for IPQ806x"
++	help
++	  Enable support for the Qualcomm IPQ806x.
++
++	  IPQ806x require special PHYS_OFFSET and can't use AUTO_ZRELADDR.
++	  The first ~20MB of RAM is reserved for the hardware network accelerators,
++	  and the bootloader removes this section from the layout passed from the
++	  ATAGS (when used by some bootloader doesn't even do that).
++
++	  To support every system and handle legacy systems, hardcode PHYS_OFFSET and
++	  disable AUTO_ZRELADDR.
++
+ endif
+-- 
+2.37.2
+

target/linux/ipq806x/patches-6.1/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch

@@ -1,62 +0,0 @@
-From fa71139b55e114aa8c3c4823ff8ee7d49ee810d4 Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Wed, 29 Apr 2015 15:21:46 -0700
-Subject: [PATCH 60/69] HACK: arch: arm: force ZRELADDR on arch-qcom
-
-ARCH_QCOM is using the ARCH_MULTIPLATFORM option, as now recommended
-on most ARM architectures. This automatically calculate ZRELADDR by
-masking PHYS_OFFSET with 0xf8000000.
-
-However, on IPQ806x, the first ~20MB of RAM is reserved for the hardware
-network accelerators, and the bootloader removes this section from the
-layout passed from the ATAGS (when used).
-
-For newer bootloader, when DT is used, this is not a problem, we just
-reserve this memory in the device tree. But if the bootloader doesn't
-have DT support, then ATAGS have to be used. In this case, the ARM
-decompressor will position the kernel in this low mem, which will not be
-in the RAM section mapped by the bootloader, which means the kernel will
-freeze in the middle of the boot process trying to map the memory.
-
-As a work around, this patch allows disabling AUTO_ZRELADDR when
-ARCH_QCOM is selected. It makes the zImage usage possible on bootloaders
-which don't support device-tree, which is the case on certain early
-IPQ806x based designs.
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- arch/arm/Kconfig                 | 2 +-
- arch/arm/Makefile                | 2 ++
- arch/arm/mach-qcom/Makefile.boot | 1 +
- 3 files changed, 4 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/mach-qcom/Makefile.boot
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -317,7 +317,7 @@ config ARCH_MULTIPLATFORM
- 	select ARCH_SELECT_MEMORY_MODEL
- 	select ARM_HAS_SG_CHAIN
- 	select ARM_PATCH_PHYS_VIRT
--	select AUTO_ZRELADDR
-+	select AUTO_ZRELADDR if !ARCH_QCOM
- 	select TIMER_OF
- 	select COMMON_CLK
- 	select GENERIC_IRQ_MULTI_HANDLER
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -237,9 +237,11 @@ MACHINE  := arch/arm/mach-$(word 1,$(mac
- else
- MACHINE  :=
- endif
-+ifeq ($(CONFIG_ARCH_QCOM),)
- ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
- MACHINE  :=
- endif
-+endif
- 
- machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
- platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
---- /dev/null
-+++ b/arch/arm/mach-qcom/Makefile.boot
-@@ -0,0 +1 @@
-+zreladdr-y+= 0x42208000