mediatek: filogic: add support for TP-Link Festa FR365
Hardware
--------
SOC : MediaTek MT7981B 2x A53
RAM : NT5AD256M16E4-JR 512MiB
Flash : ESMT F50L1G41LB 128MB
ETH : 5x 1GbE (1x WAN, 4x LAN)
1x SFP+ (2.5 GbE)
Switch : MediaTek MT7531AE
WiFi : MediaTek MT7976D
Buttons : Reset
Power : DC 12V 2A
Installation
------------
1. Disassemble the device
2. Create solder bridge on R85, R86, Solder 4-pin header on J4.
3. Connect UART console.
4. In U-Boot shell, enter the following commands to prepare flashing
```
enable_phy
extra_para set extra-para score 100
extra_para set extra-para fwFlag good
```
5. Use `mtkupgrade` command to TFTP flash openwrt-mediatek-filogic-tplink_fr365-v1-squashfs-factory.bin
6. Reboot the device
Signed-off-by: Yonghyu Ban <yhban@silicon.moe>
Link: https://github.com/openwrt/openwrt/pull/19203
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Yonghyu Ban
Hauke Mehrtens
parent
d8754f3866
commit
e507398b88
9 changed files with 465 additions and 0 deletions
406
target/linux/mediatek/dts/mt7981b-tplink-fr365v1.dts
Normal file
406
target/linux/mediatek/dts/mt7981b-tplink-fr365v1.dts
Normal file
|
|
@ -0,0 +1,406 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
#include "mt7981b.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TP-Link FR365 v1";
|
||||
compatible = "tplink,fr365-v1", "mediatek,mt7981";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
led-boot = &led_status;
|
||||
led-failsafe = &led_status;
|
||||
led-running = &led_status;
|
||||
led-upgrade = &led_status;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0 0x40000000 0 0x20000000>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_status: led_status {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&pio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_usb: led_usb {
|
||||
function = LED_FUNCTION_USB;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_sfp: led_sfp {
|
||||
label = "green:sfp";
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&pio 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_wlan: led_wlan {
|
||||
function = LED_FUNCTION_WLAN;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&pio 34 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_port2_act: led_port2_act {
|
||||
label = "green:port2_act";
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&pio 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_port2_linespeed: led_port2_linespeed {
|
||||
label = "green:port2_linespeed";
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&pio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
usb_vbus: regulator-usb-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
sfp1: sfp-1 {
|
||||
compatible = "sff,sfp";
|
||||
i2c-bus = <&i2c0>;
|
||||
los-gpios = <&pio 11 GPIO_ACTIVE_HIGH>;
|
||||
mod-def0-gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
||||
maximum-power-milliwatt = <3000>;
|
||||
tx-disable-gpios = <&pio 10 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "gmii";
|
||||
phy-handle = <&int_gbe_phy>;
|
||||
label = "port2";
|
||||
};
|
||||
};
|
||||
|
||||
&mdio_bus {
|
||||
switch: switch@1f {
|
||||
compatible = "mediatek,mt7531";
|
||||
reg = <31>;
|
||||
reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_flash_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi_nand@0 {
|
||||
compatible = "spi-nand";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0>;
|
||||
|
||||
spi-max-frequency = <52000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "bl2";
|
||||
reg = <0x0000000 0x0100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x0100000 0x0080000>;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "Factory";
|
||||
reg = <0x0180000 0x0200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@380000 {
|
||||
label = "fip";
|
||||
reg = <0x0380000 0x0200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@580000 {
|
||||
label = "ubi";
|
||||
reg = <0x0580000 0x2400000>;
|
||||
compatible = "linux,ubi";
|
||||
|
||||
volumes {
|
||||
ubi_rootdisk: ubi-volume-fit {
|
||||
volname = "kernel";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@2980000 {
|
||||
label = "ubi.b";
|
||||
reg = <0x2980000 0x2400000>;
|
||||
|
||||
volumes {
|
||||
ubi_rootdisk_2: ubi-volume-fit {
|
||||
volname = "kernel";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@4d80000 {
|
||||
label = "support-list";
|
||||
reg = <0x4d80000 0x0020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@4da0000 {
|
||||
label = "user-config";
|
||||
reg = <0x4da0000 0x0a00000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@57a0000 {
|
||||
label = "partition-table";
|
||||
reg = <0x57a0000 0x0020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@57c0000 {
|
||||
label = "device-info";
|
||||
reg = <0x57c0000 0x0020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@57e0000 {
|
||||
label = "device-info.b";
|
||||
reg = <0x57e0000 0x0020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@5800000 {
|
||||
label = "tddp";
|
||||
reg = <0x5800000 0x0020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@5820000 {
|
||||
label = "tddp.b";
|
||||
reg = <0x5820000 0x0020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@5840000 {
|
||||
label = "extra-para-ubi";
|
||||
reg = <0x5840000 0x0200000>;
|
||||
};
|
||||
|
||||
partition@5a40000 {
|
||||
label = "firmware-info";
|
||||
reg = <0x5a40000 0x0020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@5a60000 {
|
||||
label = "firmware-info.b";
|
||||
reg = <0x5a60000 0x0020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@5a80000 {
|
||||
label = "log";
|
||||
reg = <0x5a80000 0x0200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@5c80000 {
|
||||
label = "log.b";
|
||||
reg = <0x5c80000 0x0200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@5e80000 {
|
||||
label = "wlan";
|
||||
reg = <0x5e80000 0x0500000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@6380000 {
|
||||
label = "wlan.b";
|
||||
reg = <0x6380000 0x0500000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@6880000 {
|
||||
label = "database";
|
||||
reg = <0x6880000 0x1100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@7980000 {
|
||||
label = "log_recovery";
|
||||
reg = <0x7980000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@7a00000 {
|
||||
label = "panic-oops";
|
||||
reg = <0x7a00000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&switch {
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "port3";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "port4";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "port5";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "port6";
|
||||
};
|
||||
|
||||
port@5 {
|
||||
reg = <5>;
|
||||
label = "port1";
|
||||
phy-mode = "2500base-x";
|
||||
managed = "in-band-status";
|
||||
sfp = <&sfp1>;
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
ethernet = <&gmac0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
i2c0_pins: i2c0-pins {
|
||||
mux {
|
||||
function = "i2c";
|
||||
groups = "i2c0_1";
|
||||
};
|
||||
};
|
||||
|
||||
spi0_flash_pins: spi0-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi0", "spi0_wp_hold";
|
||||
};
|
||||
|
||||
conf-pu {
|
||||
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
|
||||
drive-strength = <8>;
|
||||
mediatek,pull-up-adv = <0>; /* bias-disable */
|
||||
};
|
||||
|
||||
conf-pd {
|
||||
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
|
||||
drive-strength = <8>;
|
||||
mediatek,pull-up-adv = <0>; /* bias-disable */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&xhci {
|
||||
status = "okay";
|
||||
vbus-supply = <&usb_vbus>;
|
||||
mediatek,u3p-dis-msk = <0x01>;
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -184,6 +184,11 @@ smartrg,sdg-8733a)
|
|||
ucidef_set_led_netdev "wan-orange" "WAN" "mdio-bus:08:orange:wan" "wan" "link_100 link_1000"
|
||||
ucidef_set_led_netdev "wan-white" "WAN" "mdio-bus:08:white:wan" "wan" "link_10000"
|
||||
;;
|
||||
tplink,fr365-v1)
|
||||
ucidef_set_led_netdev "port2-green-act" "port-2" "green:port2_act" "port2" "link tx rx"
|
||||
ucidef_set_led_netdev "port1-green-act" "port-1" "green:sfp" "port1" "link tx rx"
|
||||
ucidef_set_led_netdev "wlan" "wlan" "green:wlan" "phy1-ap0"
|
||||
;;
|
||||
tplink,re6000xd)
|
||||
ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-0" "lan1" "link tx rx"
|
||||
ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-1" "lan2" "link tx rx"
|
||||
|
|
|
|||
|
|
@ -133,6 +133,9 @@ mediatek_setup_interfaces()
|
|||
mercusys,mr90x-v1-ubi)
|
||||
ucidef_set_interfaces_lan_wan "lan0 lan1 lan2" eth1
|
||||
;;
|
||||
tplink,fr365-v1)
|
||||
ucidef_set_interfaces_lan_wan "port1 port3 port4 port5 port6" "port2"
|
||||
;;
|
||||
tplink,tl-xdr6086|\
|
||||
wavlink,wl-wn586x3)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2" eth1
|
||||
|
|
@ -212,6 +215,10 @@ mediatek_setup_macs()
|
|||
wan_mac=$label_mac
|
||||
lan_mac=$(macaddr_add "$label_mac" 1)
|
||||
;;
|
||||
tplink,fr365-v1)
|
||||
lan_mac=$(strings /dev/mtd11 | grep 'option macaddr' | awk -F"'" '{print $2}')
|
||||
wan_mac="$(macaddr_add $lan_mac 1)"
|
||||
;;
|
||||
xiaomi,mi-router-ax3000t|\
|
||||
xiaomi,mi-router-ax3000t-ubootmod|\
|
||||
xiaomi,mi-router-wr30u-stock|\
|
||||
|
|
|
|||
|
|
@ -13,6 +13,9 @@ case "$FIRMWARE" in
|
|||
ln -sf /tmp/tp_data/MT7981_EEPROM.bin \
|
||||
/lib/firmware/$FIRMWARE
|
||||
;;
|
||||
tplink,fr365-v1)
|
||||
ln -sf /tmp/wlan/radio /lib/firmware/$FIRMWARE
|
||||
;;
|
||||
ubnt,unifi-6-plus)
|
||||
caldata_extract_mmc "factory" 0x0 0x1000
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -170,6 +170,11 @@ case "$board" in
|
|||
[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
tplink,fr365-v1)
|
||||
addr=$(strings /dev/mtd11 | grep 'option macaddr' | awk -F"'" '{print $2}')
|
||||
[ "$PHYNBR" = "0" ] && echo $addr > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
tplink,tl-xdr4288|\
|
||||
tplink,tl-xdr6086|\
|
||||
tplink,tl-xdr6088)
|
||||
|
|
|
|||
|
|
@ -19,6 +19,9 @@ preinit_mount_cfg_part() {
|
|||
tplink,re6000xd)
|
||||
mount_ubi_part "tp_data" "tp_data"
|
||||
;;
|
||||
tplink,fr365-v1)
|
||||
mount_ubi_part "wlan" "ubi_wlan_factory_data"
|
||||
;;
|
||||
*)
|
||||
;;
|
||||
esac
|
||||
|
|
|
|||
|
|
@ -33,6 +33,16 @@ preinit_set_mac_address() {
|
|||
addr=$(get_mac_binary "/tmp/tp_data/default-mac" 0)
|
||||
ip link set dev eth1 address "$(macaddr_add $addr 1)"
|
||||
;;
|
||||
tplink,fr365-v1)
|
||||
lan_mac=$(strings /dev/mtd11 | grep 'option macaddr' | awk -F"'" '{print $2}')
|
||||
wan_mac="$(macaddr_add $lan_mac 1)"
|
||||
ip link set dev port2 address "$wan_mac"
|
||||
ip link set dev port1 address "$lan_mac"
|
||||
ip link set dev port3 address "$lan_mac"
|
||||
ip link set dev port4 address "$lan_mac"
|
||||
ip link set dev port5 address "$lan_mac"
|
||||
ip link set dev port6 address "$lan_mac"
|
||||
;;
|
||||
*)
|
||||
;;
|
||||
esac
|
||||
|
|
|
|||
|
|
@ -153,6 +153,12 @@ platform_do_upgrade() {
|
|||
CI_UBIPART="ubi0"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
tplink,fr365-v1)
|
||||
CI_UBIPART="ubi"
|
||||
CI_KERNPART="kernel"
|
||||
CI_ROOTPART="rootfs"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
nradio,c8-668gl)
|
||||
CI_DATAPART="rootfs_data"
|
||||
CI_KERNPART="kernel_2nd"
|
||||
|
|
|
|||
|
|
@ -1760,6 +1760,26 @@ define Device/tplink_re6000xd
|
|||
endef
|
||||
TARGET_DEVICES += tplink_re6000xd
|
||||
|
||||
define Device/tplink_fr365-v1
|
||||
DEVICE_VENDOR := TP-Link
|
||||
DEVICE_MODEL := FR365
|
||||
DEVICE_VARIANT := v1
|
||||
DEVICE_DTS := mt7981b-tplink-fr365v1
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
UBINIZE_OPTS := -E 5
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
IMAGE_SIZE := 32768k
|
||||
KERNEL_IN_UBI := 1
|
||||
IMAGES += factory.bin
|
||||
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
||||
IMAGE/factory.ubi := append-ubi | check-size $$$$(IMAGE_SIZE)
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
DEVICE_PACKAGES := fitblk kmod-sfp kmod-usb3 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
||||
endef
|
||||
TARGET_DEVICES += tplink_fr365-v1
|
||||
|
||||
define Device/tplink_tl-xdr-common
|
||||
DEVICE_VENDOR := TP-Link
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
|
|
|
|||
Loading…
Reference in a new issue