Merge branch 'openwrt:master' into master

config/Config-images.in

@@ -284,6 +284,7 @@ menu "Target Images"
 	comment "Image Options"
 
 	source "target/linux/*/image/Config.in"
+	source "target/linux/*/*/image/Config.in"
 
 	config TARGET_KERNEL_PARTSIZE
 		int "Kernel partition size (in MiB)"

package/base-files/files/lib/functions/network.sh

@@ -90,6 +90,13 @@ network_get_prefix6() {
 	__network_ifstatus "$1" "$2" "['ipv6-prefix'][0]['address','mask']" "/"
 }
 
+# determine first IPv6 prefix assignment of given logical interface
+# 1: destination variable
+# 2: interface
+network_get_prefix_assignment6() {
+	__network_ifstatus "$1" "$2" "['ipv6-prefix-assignment'][0]['address','mask']" "/"
+}
+
 # determine all IPv4 addresses of given logical interface
 # 1: destination variable
 # 2: interface
@@ -187,6 +194,13 @@ network_get_prefixes6() {
 	__network_ifstatus "$1" "$2" "['ipv6-prefix'][*]['address','mask']" "/ "
 }
 
+# determine all IPv6 prefix assignments of given logical interface
+# 1: destination variable
+# 2: interface
+network_get_prefix_assignments6() {
+	__network_ifstatus "$1" "$2" "['ipv6-prefix-assignment'][*]['address','mask']" "/ "
+}
+
 # determine IPv4 gateway of given logical interface
 # 1: destination variable
 # 2: interface

package/boot/grub2/Makefile

@@ -122,14 +122,14 @@ define Package/grub2/install
 		-O i386-pc \
 		-c $(PKG_BUILD_DIR)/grub-early.cfg \
 		-o $(STAGING_DIR_IMAGE)/grub2/gpt-core.img \
-		at_keyboard biosdisk boot chain configfile fat linux ls part_gpt reboot search serial vga
+		at_keyboard biosdisk boot chain configfile fat linux ls part_gpt reboot search serial test vga
 	$(STAGING_DIR_HOST)/bin/grub-mkimage \
 		-d $(PKG_BUILD_DIR)/grub-core \
 		-p /boot/grub \
 		-O i386-pc \
 		-c ./files/grub-early.cfg \
 		-o $(STAGING_DIR_IMAGE)/grub2/generic-core.img \
-		at_keyboard biosdisk boot chain configfile ext2 linux ls part_msdos reboot search serial vga
+		at_keyboard biosdisk boot chain configfile ext2 linux ls part_msdos reboot search serial test vga
 	$(STAGING_DIR_HOST)/bin/grub-mkimage \
 		-d $(PKG_BUILD_DIR)/grub-core \
 		-p /boot/grub \
@@ -154,7 +154,7 @@ define Package/grub2-efi/install
 		-O $(CONFIG_ARCH)-efi \
 		-c $(PKG_BUILD_DIR)/grub-early.cfg \
 		-o $(STAGING_DIR_IMAGE)/grub2/boot$(if $(CONFIG_x86_64),x64,ia32).efi \
-		at_keyboard boot chain configfile fat linux ls part_gpt reboot serial efi_gop efi_uga
+		at_keyboard boot chain configfile fat linux ls part_gpt reboot serial test efi_gop efi_uga
 	$(STAGING_DIR_HOST)/bin/grub-mkimage \
 		-d $(PKG_BUILD_DIR)/grub-core \
 		-p /boot/grub \

package/boot/uboot-envtools/files/mvebu

@@ -13,6 +13,7 @@ touch /etc/config/ubootenv
 board=$(board_name)
 
 case "$board" in
+buffalo,ls220de|\
 buffalo,ls421de)
 	ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x10000"
 	;;

package/kernel/mac80211/patches/subsys/320-wifi-mac80211-use-mesh-header-cache-to-speed-up-mesh.patch

@@ -3,40 +3,92 @@ Date: Thu, 16 Feb 2023 11:07:30 +0100
 Subject: [PATCH] wifi: mac80211: use mesh header cache to speed up mesh
  forwarding
 
-Use it to look up the next hop address + sta pointer + key and call
-__ieee80211_mesh_xmit_fast to queue the tx frame.
-
 Significantly reduces mesh forwarding path CPU usage and enables the
-use of iTXQ.
+direct use of iTXQ.
 
 Signed-off-by: Felix Fietkau <nbd@nbd.name>
 ---
 
 --- a/net/mac80211/rx.c
 +++ b/net/mac80211/rx.c
-@@ -2731,6 +2731,7 @@ ieee80211_rx_mesh_data(struct ieee80211_
+@@ -2720,6 +2720,65 @@ ieee80211_deliver_skb(struct ieee80211_r
- 	struct ieee80211_hdr hdr = {
+ 	}
- 		.frame_control = cpu_to_le16(fc)
- 	};
-+	struct mhdr_cache_entry *entry = NULL;
- 	struct ieee80211_hdr *fwd_hdr;
- 	struct ieee80211s_hdr *mesh_hdr;
- 	struct ieee80211_tx_info *info;
-@@ -2788,7 +2789,12 @@ ieee80211_rx_mesh_data(struct ieee80211_
- 		return RX_DROP_MONITOR;
  }
  
--	if (mesh_hdr->flags & MESH_FLAGS_AE) {
++#ifdef CPTCFG_MAC80211_MESH
-+	if ((mesh_hdr->flags & MESH_FLAGS_AE) == MESH_FLAGS_AE_A5_A6)
++static bool
-+		entry = mesh_get_cached_hdr(sdata, mesh_hdr->eaddr1);
++ieee80211_rx_mesh_fast_forward(struct ieee80211_sub_if_data *sdata,
-+	else if (!(mesh_hdr->flags & MESH_FLAGS_AE))
++			       struct sk_buff *skb, int hdrlen)
-+		entry = mesh_get_cached_hdr(sdata, eth->h_dest);
++{
++	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
++	struct ieee80211_mesh_fast_tx *entry = NULL;
++	struct ieee80211s_hdr *mesh_hdr;
++	struct tid_ampdu_tx *tid_tx;
++	struct sta_info *sta;
++	struct ethhdr eth;
++	u8 tid;
 +
-+	if (!entry && (mesh_hdr->flags & MESH_FLAGS_AE)) {
++	mesh_hdr = (struct ieee80211s_hdr *)(skb->data + sizeof(eth));
- 		struct mesh_path *mppath;
++	if ((mesh_hdr->flags & MESH_FLAGS_AE) == MESH_FLAGS_AE_A5_A6)
- 		char *proxied_addr;
++		entry = mesh_fast_tx_get(sdata, mesh_hdr->eaddr1);
- 		bool update = false;
++	else if (!(mesh_hdr->flags & MESH_FLAGS_AE))
-@@ -2862,11 +2868,23 @@ ieee80211_rx_mesh_data(struct ieee80211_
++		entry = mesh_fast_tx_get(sdata, skb->data);
++	if (!entry)
++		return false;
++
++	sta = rcu_dereference(entry->mpath->next_hop);
++	if (!sta)
++		return false;
++
++	if (skb_linearize(skb))
++		return false;
++
++	tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK;
++	tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]);
++	if (tid_tx) {
++		if (!test_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state))
++			return false;
++
++		if (tid_tx->timeout)
++			tid_tx->last_tx = jiffies;
++	}
++
++	ieee80211_aggr_check(sdata, sta, skb);
++
++	if (ieee80211_get_8023_tunnel_proto(skb->data + hdrlen,
++					    &skb->protocol))
++		hdrlen += ETH_ALEN;
++	else
++		skb->protocol = htons(skb->len - hdrlen);
++	skb_set_network_header(skb, hdrlen + 2);
++
++	skb->dev = sdata->dev;
++	memcpy(&eth, skb->data, ETH_HLEN - 2);
++	skb_pull(skb, sizeof(eth));
++	__ieee80211_xmit_fast(sdata, sta, &entry->fast_tx, skb, tid_tx,
++			      eth.h_dest, eth.h_source);
++	IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_unicast);
++	IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_frames);
++
++	return true;
++}
++#endif
++
+ static ieee80211_rx_result
+ ieee80211_rx_mesh_data(struct ieee80211_sub_if_data *sdata, struct sta_info *sta,
+ 		       struct sk_buff *skb)
+@@ -2824,6 +2883,10 @@ ieee80211_rx_mesh_data(struct ieee80211_
+ 
+ 	skb_set_queue_mapping(skb, ieee802_1d_to_ac[skb->priority]);
+ 
++	if (!multicast &&
++	    ieee80211_rx_mesh_fast_forward(sdata, skb, mesh_hdrlen))
++		return RX_QUEUED;
++
+ 	ieee80211_fill_mesh_addresses(&hdr, &hdr.frame_control,
+ 				      eth->h_dest, eth->h_source);
+ 	hdrlen = ieee80211_hdrlen(hdr.frame_control);
+@@ -2862,6 +2925,7 @@ ieee80211_rx_mesh_data(struct ieee80211_
  	info->control.flags |= IEEE80211_TX_INTCFL_NEED_TXPROCESSING;
  	info->control.vif = &sdata->vif;
  	info->control.jiffies = jiffies;
@@ -44,23 +96,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	if (multicast) {
  		IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_mcast);
  		memcpy(fwd_hdr->addr2, sdata->vif.addr, ETH_ALEN);
- 		/* update power mode indication when forwarding */
+@@ -2883,7 +2947,6 @@ ieee80211_rx_mesh_data(struct ieee80211_
- 		ieee80211_mps_set_frame_flags(sdata, NULL, fwd_hdr);
-+	} else if (entry) {
-+		struct ieee80211_hdr *ehdr = (struct ieee80211_hdr *)entry->hdr;
-+
-+		ether_addr_copy(fwd_hdr->addr1, ehdr->addr1);
-+		ether_addr_copy(fwd_hdr->addr2, sdata->vif.addr);
-+		IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_unicast);
-+		IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_frames);
-+		qos[0] = fwd_skb->priority;
-+		qos[1] = ieee80211_get_qos_ctl(ehdr)[1];
-+		__ieee80211_mesh_xmit_fast(sdata, entry, fwd_skb);
-+		return RX_QUEUED;
- 	} else if (!mesh_nexthop_lookup(sdata, fwd_skb)) {
- 		/* mesh power mode flags updated in mesh_nexthop_lookup */
- 		IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_unicast);
-@@ -2883,7 +2901,6 @@ ieee80211_rx_mesh_data(struct ieee80211_
  	}
  
  	IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_frames);
@@ -68,3 +104,29 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	ieee80211_add_pending_skb(local, fwd_skb);
  
  rx_accept:
+--- a/net/mac80211/ieee80211_i.h
++++ b/net/mac80211/ieee80211_i.h
+@@ -2018,6 +2018,8 @@ void __ieee80211_xmit_fast(struct ieee80
+ 			   struct ieee80211_fast_tx *fast_tx,
+ 			   struct sk_buff *skb, bool ampdu,
+ 			   const u8 *da, const u8 *sa);
++void ieee80211_aggr_check(struct ieee80211_sub_if_data *sdata,
++			  struct sta_info *sta, struct sk_buff *skb);
+ 
+ /* HT */
+ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata,
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -1191,10 +1191,8 @@ static bool ieee80211_tx_prep_agg(struct
+ 	return queued;
+ }
+ 
+-static void
+-ieee80211_aggr_check(struct ieee80211_sub_if_data *sdata,
+-		     struct sta_info *sta,
+-		     struct sk_buff *skb)
++void ieee80211_aggr_check(struct ieee80211_sub_if_data *sdata,
++			  struct sta_info *sta, struct sk_buff *skb)
+ {
+ 	struct rate_control_ref *ref = sdata->local->rate_ctrl;
+ 	u16 tid;

package/kernel/mac80211/patches/subsys/321-mac80211-fix-mesh-forwarding.patch

@@ -11,7 +11,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/net/mac80211/rx.c
 +++ b/net/mac80211/rx.c
-@@ -2847,6 +2847,9 @@ ieee80211_rx_mesh_data(struct ieee80211_
+@@ -2904,6 +2904,9 @@ ieee80211_rx_mesh_data(struct ieee80211_
  
  		if (skb_cow_head(fwd_skb, hdrlen - sizeof(struct ethhdr)))
  			return RX_DROP_UNUSABLE;
@@ -21,7 +21,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	}
  
  	fwd_hdr = skb_push(fwd_skb, hdrlen - sizeof(struct ethhdr));
-@@ -2861,7 +2864,7 @@ ieee80211_rx_mesh_data(struct ieee80211_
+@@ -2918,7 +2921,7 @@ ieee80211_rx_mesh_data(struct ieee80211_
  		hdrlen += ETH_ALEN;
  	else
  		fwd_skb->protocol = htons(fwd_skb->len - hdrlen);

package/kernel/mac80211/patches/subsys/322-wifi-mac80211-fix-mesh-path-discovery-based-on-unica.patch

@@ -0,0 +1,52 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Sun, 26 Feb 2023 20:30:20 +0100
+Subject: [PATCH] wifi: mac80211: fix mesh path discovery based on unicast
+ packets
+
+If a packet has reached its intended destination, it was bumped to the code
+that accepts it, without first checking if a mesh_path needs to be created
+based on the discovered source.
+Fix this by moving the destination address check further down
+
+Fixes: 986e43b19ae9 ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces")
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/net/mac80211/rx.c
++++ b/net/mac80211/rx.c
+@@ -2824,17 +2824,6 @@ ieee80211_rx_mesh_data(struct ieee80211_
+ 	    mesh_rmc_check(sdata, eth->h_source, mesh_hdr))
+ 		return RX_DROP_MONITOR;
+ 
+-	/* Frame has reached destination.  Don't forward */
+-	if (ether_addr_equal(sdata->vif.addr, eth->h_dest))
+-		goto rx_accept;
+-
+-	if (!ifmsh->mshcfg.dot11MeshForwarding) {
+-		if (is_multicast_ether_addr(eth->h_dest))
+-			goto rx_accept;
+-
+-		return RX_DROP_MONITOR;
+-	}
+-
+ 	/* forward packet */
+ 	if (sdata->crypto_tx_tailroom_needed_cnt)
+ 		tailroom = IEEE80211_ENCRYPT_TAILROOM;
+@@ -2881,6 +2870,17 @@ ieee80211_rx_mesh_data(struct ieee80211_
+ 		rcu_read_unlock();
+ 	}
+ 
++	/* Frame has reached destination.  Don't forward */
++	if (ether_addr_equal(sdata->vif.addr, eth->h_dest))
++		goto rx_accept;
++
++	if (!ifmsh->mshcfg.dot11MeshForwarding) {
++		if (is_multicast_ether_addr(eth->h_dest))
++			goto rx_accept;
++
++		return RX_DROP_MONITOR;
++	}
++
+ 	skb_set_queue_mapping(skb, ieee802_1d_to_ac[skb->priority]);
+ 
+ 	if (!multicast &&

package/kernel/mac80211/patches/subsys/500-mac80211_configure_antenna_gain.patch

@@ -87,7 +87,7 @@
  	CFG80211_TESTMODE_DUMP(ieee80211_testmode_dump)
 --- a/net/mac80211/ieee80211_i.h
 +++ b/net/mac80211/ieee80211_i.h
-@@ -1536,6 +1536,7 @@ struct ieee80211_local {
+@@ -1535,6 +1535,7 @@ struct ieee80211_local {
  	int dynamic_ps_forced_timeout;
  
  	int user_power_level; /* in dBm, for all interfaces */

package/libs/libcap/Makefile

@@ -6,12 +6,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libcap
-PKG_VERSION:=2.66
+PKG_VERSION:=2.67
-PKG_RELEASE:=$(AUTORELEASE)
+PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
 PKG_SOURCE_URL:=@KERNEL/linux/libs/security/linux-privs/libcap2
-PKG_HASH:=15c40ededb3003d70a283fe587a36b7d19c8b3b554e33f86129c059a4bb466b2
+PKG_HASH:=ce9b22fdc271beb6dae7543da5f74cf24cb82e6848cfd088a5a069dec5ea5198
 
 PKG_MAINTAINER:=Paul Wassi <p.wassi@gmx.at>
 PKG_LICENSE:=GPL-2.0-only

package/libs/ncurses/Makefile

@@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=ncurses
 PKG_CPE_ID:=cpe:/a:gnu:ncurses
 PKG_VERSION:=6.4
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=@GNU/$(PKG_NAME)
@@ -123,6 +123,7 @@ ifneq ($(HOST_OS),FreeBSD)
 	)
 	for file in \
 		a/ansi \
+		a/alacritty \
 		d/dumb \
 		l/linux \
 		r/rxvt \

package/libs/ustream-ssl/Makefile

@@ -1,13 +1,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ustream-ssl
-PKG_RELEASE:=2
+PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/ustream-ssl.git
-PKG_SOURCE_DATE:=2022-12-08
+PKG_SOURCE_DATE:=2023-02-25
-PKG_SOURCE_VERSION:=9217ab46536353c7c792951b57163063f5ec7a3b
+PKG_SOURCE_VERSION:=498f6e268d4d2b0ad33b430f4ba1abe397d31496
-PKG_MIRROR_HASH:=cd4dc6a6c18290348b1f8b1c01df3320e4954dc46d714c797bef066f7a91248d
+PKG_MIRROR_HASH:=a201d065dd613e30886c9f13a0851cec79538192cfe591b6f8ecd88724d55fb1
 CMAKE_INSTALL:=1
 
 PKG_LICENSE:=ISC

package/network/config/netifd/Makefile

@@ -1,13 +1,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=netifd
-PKG_RELEASE:=2
+PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/netifd.git
-PKG_SOURCE_DATE:=2022-12-30
+PKG_SOURCE_DATE:=2023-02-25
-PKG_SOURCE_VERSION:=81c1fbcba2f27f687c2a471f341502d47679f401
+PKG_SOURCE_VERSION:=463a1207f0766417866e2c28316e58a96f84370b
-PKG_MIRROR_HASH:=41d19f2804759aa42708942e27116bec78b169abee639d97c2ec7f0f62fa7739
+PKG_MIRROR_HASH:=1d407847282637f6e069b482368f2f8fc0126e66f3b37e4258e1fc1d19dd1ce5
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 
 PKG_LICENSE:=GPL-2.0

package/network/services/dnsmasq/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dnsmasq
-PKG_UPSTREAM_VERSION:=2.88
+PKG_UPSTREAM_VERSION:=2.89
 PKG_VERSION:=$(subst test,~~test,$(subst rc,~rc,$(PKG_UPSTREAM_VERSION)))
 PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_UPSTREAM_VERSION).tar.xz
 PKG_SOURCE_URL:=https://thekelleys.org.uk/dnsmasq/
-PKG_HASH:=23544deda10340c053bea6f15a93fed6ea7f5aaa85316bfc671ffa6d22fbc1b3
+PKG_HASH:=02bd230346cf0b9d5909f5e151df168b2707103785eb616b56685855adebb609
 
 PKG_LICENSE:=GPL-2.0
 PKG_LICENSE_FILES:=COPYING

package/network/services/dnsmasq/patches/100-remove-old-runtime-kernel-support.patch

@@ -26,7 +26,7 @@ Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
  
 --- a/src/dnsmasq.h
 +++ b/src/dnsmasq.h
-@@ -1247,7 +1247,7 @@ extern struct daemon {
+@@ -1248,7 +1248,7 @@ extern struct daemon {
    int inotifyfd;
  #endif
  #if defined(HAVE_LINUX_NETWORK)
@@ -35,7 +35,7 @@ Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
  #elif defined(HAVE_BSD_NETWORK)
    int dhcp_raw_fd, dhcp_icmp_fd, routefd;
  #endif
-@@ -1452,9 +1452,6 @@ int read_write(int fd, unsigned char *pa
+@@ -1453,9 +1453,6 @@ int read_write(int fd, unsigned char *pa
  void close_fds(long max_fd, int spare1, int spare2, int spare3);
  int wildcard_match(const char* wildcard, const char* match);
  int wildcard_matchn(const char* wildcard, const char* match, int num);

package/network/services/dnsmasq/patches/200-ubus_dns.patch

@@ -1,6 +1,6 @@
 --- a/src/dnsmasq.h
 +++ b/src/dnsmasq.h
-@@ -1630,14 +1630,26 @@ void emit_dbus_signal(int action, struct
+@@ -1631,14 +1631,26 @@ void emit_dbus_signal(int action, struct
  
  /* ubus.c */
  #ifdef HAVE_UBUS

package/network/utils/ethtool/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ethtool
-PKG_VERSION:=6.1
+PKG_VERSION:=6.2
 PKG_RELEASE:=1
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
 PKG_SOURCE_URL:=@KERNEL/software/network/ethtool
-PKG_HASH:=c41fc881ffa5a40432d2dd829eb44c64a49dee482e716baacf9262c64daa8f90
+PKG_HASH:=86df0114064d4d73f6bf72bf03e85c33964a519ee0c1d1ba65005ad2d0e570e1
 
 PKG_LICENSE:=GPL-2.0
 PKG_LICENSE_FILES:=COPYING

package/network/utils/ethtool/patches/100-uapi-Bring-in-if-h.patch

@@ -1,465 +0,0 @@
-From:   Florian Fainelli <f.fainelli@gmail.com>
-To:     netdev@vger.kernel.org
-Subject: [PATCH ethtool v2 1/3] uapi: Bring in if.h
-Date:   Sat, 14 Jan 2023 08:34:09 -0800
-
-Bring in if.h from commit eec517cdb481 ("net: Add IF_OPER_TESTING") as
-well as uapi/linux/hdlc/ioctl.h. Ensure that we define all of the
-necessary guards to provide updated definitions of ifmap, ifreq and
-IFNAMSIZ. This resolves build issues with kernel headers < 4.11 which
-lacked 2618be7dccf8739b89e1906b64bd8d551af351e6 ("uapi: fix linux/if.h
-userspace compilation errors").
-
-Fixes: 1fa60003a8b8 ("misc: header includes cleanup")
-Reported-by: Markus Mayer <mmayer@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- Makefile.am             |   6 +-
- internal.h              |   7 +-
- uapi/linux/hdlc/ioctl.h |  94 +++++++++++++
- uapi/linux/if.h         | 296 ++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 397 insertions(+), 6 deletions(-)
- create mode 100644 uapi/linux/hdlc/ioctl.h
- create mode 100644 uapi/linux/if.h
-
---- a/Makefile.am
-+++ b/Makefile.am
-@@ -7,7 +7,8 @@ EXTRA_DIST = LICENSE ethtool.8 ethtool.s
- 
- sbin_PROGRAMS = ethtool
- ethtool_SOURCES = ethtool.c uapi/linux/ethtool.h internal.h \
--		  uapi/linux/net_tstamp.h rxclass.c common.c common.h \
-+		  uapi/linux/net_tstamp.h uapi/linux/if.h uapi/linux/hdlc/ioctl.h \
-+		  rxclass.c common.c common.h \
- 		  json_writer.c json_writer.h json_print.c json_print.h \
- 		  list.h
- if ETHTOOL_ENABLE_PRETTY_DUMP
-@@ -43,7 +44,8 @@ ethtool_SOURCES += \
- 		  netlink/desc-rtnl.c netlink/cable_test.c netlink/tunnels.c \
- 		  uapi/linux/ethtool_netlink.h \
- 		  uapi/linux/netlink.h uapi/linux/genetlink.h \
--		  uapi/linux/rtnetlink.h uapi/linux/if_link.h
-+		  uapi/linux/rtnetlink.h uapi/linux/if_link.h \
-+		  uapi/linux/if.h uapi/linux/hdlc/ioctl.h
- AM_CPPFLAGS += @MNL_CFLAGS@
- LDADD += @MNL_LIBS@
- endif
---- a/internal.h
-+++ b/internal.h
-@@ -21,6 +21,9 @@
- #include <unistd.h>
- #include <endian.h>
- #include <sys/ioctl.h>
-+#define __UAPI_DEF_IF_IFNAMSIZ	1
-+#define __UAPI_DEF_IF_IFMAP	1
-+#define __UAPI_DEF_IF_IFREQ	1
- #include <linux/if.h>
- 
- #include "json_writer.h"
-@@ -52,10 +55,6 @@ typedef int32_t s32;
- #define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
- #endif
- 
--#ifndef ALTIFNAMSIZ
--#define ALTIFNAMSIZ 128
--#endif
--
- #include <linux/ethtool.h>
- #include <linux/net_tstamp.h>
- 
---- /dev/null
-+++ b/uapi/linux/hdlc/ioctl.h
-@@ -0,0 +1,94 @@
-+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-+#ifndef __HDLC_IOCTL_H__
-+#define __HDLC_IOCTL_H__
-+
-+
-+#define GENERIC_HDLC_VERSION 4	/* For synchronization with sethdlc utility */
-+
-+#define CLOCK_DEFAULT   0	/* Default setting */
-+#define CLOCK_EXT	1	/* External TX and RX clock - DTE */
-+#define CLOCK_INT	2	/* Internal TX and RX clock - DCE */
-+#define CLOCK_TXINT	3	/* Internal TX and external RX clock */
-+#define CLOCK_TXFROMRX	4	/* TX clock derived from external RX clock */
-+
-+
-+#define ENCODING_DEFAULT	0 /* Default setting */
-+#define ENCODING_NRZ		1
-+#define ENCODING_NRZI		2
-+#define ENCODING_FM_MARK	3
-+#define ENCODING_FM_SPACE	4
-+#define ENCODING_MANCHESTER	5
-+
-+
-+#define PARITY_DEFAULT		0 /* Default setting */
-+#define PARITY_NONE		1 /* No parity */
-+#define PARITY_CRC16_PR0	2 /* CRC16, initial value 0x0000 */
-+#define PARITY_CRC16_PR1	3 /* CRC16, initial value 0xFFFF */
-+#define PARITY_CRC16_PR0_CCITT	4 /* CRC16, initial 0x0000, ITU-T version */
-+#define PARITY_CRC16_PR1_CCITT	5 /* CRC16, initial 0xFFFF, ITU-T version */
-+#define PARITY_CRC32_PR0_CCITT	6 /* CRC32, initial value 0x00000000 */
-+#define PARITY_CRC32_PR1_CCITT	7 /* CRC32, initial value 0xFFFFFFFF */
-+
-+#define LMI_DEFAULT		0 /* Default setting */
-+#define LMI_NONE		1 /* No LMI, all PVCs are static */
-+#define LMI_ANSI		2 /* ANSI Annex D */
-+#define LMI_CCITT		3 /* ITU-T Annex A */
-+#define LMI_CISCO		4 /* The "original" LMI, aka Gang of Four */
-+
-+#ifndef __ASSEMBLY__
-+
-+typedef struct {
-+	unsigned int clock_rate; /* bits per second */
-+	unsigned int clock_type; /* internal, external, TX-internal etc. */
-+	unsigned short loopback;
-+} sync_serial_settings;          /* V.35, V.24, X.21 */
-+
-+typedef struct {
-+	unsigned int clock_rate; /* bits per second */
-+	unsigned int clock_type; /* internal, external, TX-internal etc. */
-+	unsigned short loopback;
-+	unsigned int slot_map;
-+} te1_settings;                  /* T1, E1 */
-+
-+typedef struct {
-+	unsigned short encoding;
-+	unsigned short parity;
-+} raw_hdlc_proto;
-+
-+typedef struct {
-+	unsigned int t391;
-+	unsigned int t392;
-+	unsigned int n391;
-+	unsigned int n392;
-+	unsigned int n393;
-+	unsigned short lmi;
-+	unsigned short dce; /* 1 for DCE (network side) operation */
-+} fr_proto;
-+
-+typedef struct {
-+	unsigned int dlci;
-+} fr_proto_pvc;          /* for creating/deleting FR PVCs */
-+
-+typedef struct {
-+	unsigned int dlci;
-+	char master[IFNAMSIZ];	/* Name of master FRAD device */
-+}fr_proto_pvc_info;		/* for returning PVC information only */
-+
-+typedef struct {
-+    unsigned int interval;
-+    unsigned int timeout;
-+} cisco_proto;
-+
-+typedef struct {
-+	unsigned short dce; /* 1 for DCE (network side) operation */
-+	unsigned int modulo; /* modulo (8 = basic / 128 = extended) */
-+	unsigned int window; /* frame window size */
-+	unsigned int t1; /* timeout t1 */
-+	unsigned int t2; /* timeout t2 */
-+	unsigned int n2; /* frame retry counter */
-+} x25_hdlc_proto;
-+
-+/* PPP doesn't need any info now - supply length = 0 to ioctl */
-+
-+#endif /* __ASSEMBLY__ */
-+#endif /* __HDLC_IOCTL_H__ */
---- /dev/null
-+++ b/uapi/linux/if.h
-@@ -0,0 +1,296 @@
-+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
-+/*
-+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
-+ *		operating system.  INET is implemented using the  BSD Socket
-+ *		interface as the means of communication with the user level.
-+ *
-+ *		Global definitions for the INET interface module.
-+ *
-+ * Version:	@(#)if.h	1.0.2	04/18/93
-+ *
-+ * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
-+ *		Ross Biro
-+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
-+ *
-+ *		This program is free software; you can redistribute it and/or
-+ *		modify it under the terms of the GNU General Public License
-+ *		as published by the Free Software Foundation; either version
-+ *		2 of the License, or (at your option) any later version.
-+ */
-+#ifndef _LINUX_IF_H
-+#define _LINUX_IF_H
-+
-+#include <linux/libc-compat.h>          /* for compatibility with glibc */
-+#include <linux/types.h>		/* for "__kernel_caddr_t" et al	*/
-+#include <linux/socket.h>		/* for "struct sockaddr" et al	*/
-+		/* for "__user" et al           */
-+
-+#include <sys/socket.h>			/* for struct sockaddr.		*/
-+
-+#if __UAPI_DEF_IF_IFNAMSIZ
-+#define	IFNAMSIZ	16
-+#endif /* __UAPI_DEF_IF_IFNAMSIZ */
-+#define	IFALIASZ	256
-+#define	ALTIFNAMSIZ	128
-+#include <linux/hdlc/ioctl.h>
-+
-+/* For glibc compatibility. An empty enum does not compile. */
-+#if __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO != 0 || \
-+    __UAPI_DEF_IF_NET_DEVICE_FLAGS != 0
-+/**
-+ * enum net_device_flags - &struct net_device flags
-+ *
-+ * These are the &struct net_device flags, they can be set by drivers, the
-+ * kernel and some can be triggered by userspace. Userspace can query and
-+ * set these flags using userspace utilities but there is also a sysfs
-+ * entry available for all dev flags which can be queried and set. These flags
-+ * are shared for all types of net_devices. The sysfs entries are available
-+ * via /sys/class/net/<dev>/flags. Flags which can be toggled through sysfs
-+ * are annotated below, note that only a few flags can be toggled and some
-+ * other flags are always preserved from the original net_device flags
-+ * even if you try to set them via sysfs. Flags which are always preserved
-+ * are kept under the flag grouping @IFF_VOLATILE. Flags which are __volatile__
-+ * are annotated below as such.
-+ *
-+ * You should have a pretty good reason to be extending these flags.
-+ *
-+ * @IFF_UP: interface is up. Can be toggled through sysfs.
-+ * @IFF_BROADCAST: broadcast address valid. Volatile.
-+ * @IFF_DEBUG: turn on debugging. Can be toggled through sysfs.
-+ * @IFF_LOOPBACK: is a loopback net. Volatile.
-+ * @IFF_POINTOPOINT: interface is has p-p link. Volatile.
-+ * @IFF_NOTRAILERS: avoid use of trailers. Can be toggled through sysfs.
-+ *	Volatile.
-+ * @IFF_RUNNING: interface RFC2863 OPER_UP. Volatile.
-+ * @IFF_NOARP: no ARP protocol. Can be toggled through sysfs. Volatile.
-+ * @IFF_PROMISC: receive all packets. Can be toggled through sysfs.
-+ * @IFF_ALLMULTI: receive all multicast packets. Can be toggled through
-+ *	sysfs.
-+ * @IFF_MASTER: master of a load balancer. Volatile.
-+ * @IFF_SLAVE: slave of a load balancer. Volatile.
-+ * @IFF_MULTICAST: Supports multicast. Can be toggled through sysfs.
-+ * @IFF_PORTSEL: can set media type. Can be toggled through sysfs.
-+ * @IFF_AUTOMEDIA: auto media select active. Can be toggled through sysfs.
-+ * @IFF_DYNAMIC: dialup device with changing addresses. Can be toggled
-+ *	through sysfs.
-+ * @IFF_LOWER_UP: driver signals L1 up. Volatile.
-+ * @IFF_DORMANT: driver signals dormant. Volatile.
-+ * @IFF_ECHO: echo sent packets. Volatile.
-+ */
-+enum net_device_flags {
-+/* for compatibility with glibc net/if.h */
-+#if __UAPI_DEF_IF_NET_DEVICE_FLAGS
-+	IFF_UP				= 1<<0,  /* sysfs */
-+	IFF_BROADCAST			= 1<<1,  /* __volatile__ */
-+	IFF_DEBUG			= 1<<2,  /* sysfs */
-+	IFF_LOOPBACK			= 1<<3,  /* __volatile__ */
-+	IFF_POINTOPOINT			= 1<<4,  /* __volatile__ */
-+	IFF_NOTRAILERS			= 1<<5,  /* sysfs */
-+	IFF_RUNNING			= 1<<6,  /* __volatile__ */
-+	IFF_NOARP			= 1<<7,  /* sysfs */
-+	IFF_PROMISC			= 1<<8,  /* sysfs */
-+	IFF_ALLMULTI			= 1<<9,  /* sysfs */
-+	IFF_MASTER			= 1<<10, /* __volatile__ */
-+	IFF_SLAVE			= 1<<11, /* __volatile__ */
-+	IFF_MULTICAST			= 1<<12, /* sysfs */
-+	IFF_PORTSEL			= 1<<13, /* sysfs */
-+	IFF_AUTOMEDIA			= 1<<14, /* sysfs */
-+	IFF_DYNAMIC			= 1<<15, /* sysfs */
-+#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS */
-+#if __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO
-+	IFF_LOWER_UP			= 1<<16, /* __volatile__ */
-+	IFF_DORMANT			= 1<<17, /* __volatile__ */
-+	IFF_ECHO			= 1<<18, /* __volatile__ */
-+#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO */
-+};
-+#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO != 0 || __UAPI_DEF_IF_NET_DEVICE_FLAGS != 0 */
-+
-+/* for compatibility with glibc net/if.h */
-+#if __UAPI_DEF_IF_NET_DEVICE_FLAGS
-+#define IFF_UP				IFF_UP
-+#define IFF_BROADCAST			IFF_BROADCAST
-+#define IFF_DEBUG			IFF_DEBUG
-+#define IFF_LOOPBACK			IFF_LOOPBACK
-+#define IFF_POINTOPOINT			IFF_POINTOPOINT
-+#define IFF_NOTRAILERS			IFF_NOTRAILERS
-+#define IFF_RUNNING			IFF_RUNNING
-+#define IFF_NOARP			IFF_NOARP
-+#define IFF_PROMISC			IFF_PROMISC
-+#define IFF_ALLMULTI			IFF_ALLMULTI
-+#define IFF_MASTER			IFF_MASTER
-+#define IFF_SLAVE			IFF_SLAVE
-+#define IFF_MULTICAST			IFF_MULTICAST
-+#define IFF_PORTSEL			IFF_PORTSEL
-+#define IFF_AUTOMEDIA			IFF_AUTOMEDIA
-+#define IFF_DYNAMIC			IFF_DYNAMIC
-+#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS */
-+
-+#if __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO
-+#define IFF_LOWER_UP			IFF_LOWER_UP
-+#define IFF_DORMANT			IFF_DORMANT
-+#define IFF_ECHO			IFF_ECHO
-+#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO */
-+
-+#define IFF_VOLATILE	(IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\
-+		IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
-+
-+#define IF_GET_IFACE	0x0001		/* for querying only */
-+#define IF_GET_PROTO	0x0002
-+
-+/* For definitions see hdlc.h */
-+#define IF_IFACE_V35	0x1000		/* V.35 serial interface	*/
-+#define IF_IFACE_V24	0x1001		/* V.24 serial interface	*/
-+#define IF_IFACE_X21	0x1002		/* X.21 serial interface	*/
-+#define IF_IFACE_T1	0x1003		/* T1 telco serial interface	*/
-+#define IF_IFACE_E1	0x1004		/* E1 telco serial interface	*/
-+#define IF_IFACE_SYNC_SERIAL 0x1005	/* can't be set by software	*/
-+#define IF_IFACE_X21D   0x1006          /* X.21 Dual Clocking (FarSite) */
-+
-+/* For definitions see hdlc.h */
-+#define IF_PROTO_HDLC	0x2000		/* raw HDLC protocol		*/
-+#define IF_PROTO_PPP	0x2001		/* PPP protocol			*/
-+#define IF_PROTO_CISCO	0x2002		/* Cisco HDLC protocol		*/
-+#define IF_PROTO_FR	0x2003		/* Frame Relay protocol		*/
-+#define IF_PROTO_FR_ADD_PVC 0x2004	/*    Create FR PVC		*/
-+#define IF_PROTO_FR_DEL_PVC 0x2005	/*    Delete FR PVC		*/
-+#define IF_PROTO_X25	0x2006		/* X.25				*/
-+#define IF_PROTO_HDLC_ETH 0x2007	/* raw HDLC, Ethernet emulation	*/
-+#define IF_PROTO_FR_ADD_ETH_PVC 0x2008	/*  Create FR Ethernet-bridged PVC */
-+#define IF_PROTO_FR_DEL_ETH_PVC 0x2009	/*  Delete FR Ethernet-bridged PVC */
-+#define IF_PROTO_FR_PVC	0x200A		/* for reading PVC status	*/
-+#define IF_PROTO_FR_ETH_PVC 0x200B
-+#define IF_PROTO_RAW    0x200C          /* RAW Socket                   */
-+
-+/* RFC 2863 operational status */
-+enum {
-+	IF_OPER_UNKNOWN,
-+	IF_OPER_NOTPRESENT,
-+	IF_OPER_DOWN,
-+	IF_OPER_LOWERLAYERDOWN,
-+	IF_OPER_TESTING,
-+	IF_OPER_DORMANT,
-+	IF_OPER_UP,
-+};
-+
-+/* link modes */
-+enum {
-+	IF_LINK_MODE_DEFAULT,
-+	IF_LINK_MODE_DORMANT,	/* limit upward transition to dormant */
-+	IF_LINK_MODE_TESTING,	/* limit upward transition to testing */
-+};
-+
-+/*
-+ *	Device mapping structure. I'd just gone off and designed a 
-+ *	beautiful scheme using only loadable modules with arguments
-+ *	for driver options and along come the PCMCIA people 8)
-+ *
-+ *	Ah well. The get() side of this is good for WDSETUP, and it'll
-+ *	be handy for debugging things. The set side is fine for now and
-+ *	being very small might be worth keeping for clean configuration.
-+ */
-+
-+/* for compatibility with glibc net/if.h */
-+#if __UAPI_DEF_IF_IFMAP
-+struct ifmap {
-+	unsigned long mem_start;
-+	unsigned long mem_end;
-+	unsigned short base_addr; 
-+	unsigned char irq;
-+	unsigned char dma;
-+	unsigned char port;
-+	/* 3 bytes spare */
-+};
-+#endif /* __UAPI_DEF_IF_IFMAP */
-+
-+struct if_settings {
-+	unsigned int type;	/* Type of physical device or protocol */
-+	unsigned int size;	/* Size of the data allocated by the caller */
-+	union {
-+		/* {atm/eth/dsl}_settings anyone ? */
-+		raw_hdlc_proto		*raw_hdlc;
-+		cisco_proto		*cisco;
-+		fr_proto		*fr;
-+		fr_proto_pvc		*fr_pvc;
-+		fr_proto_pvc_info	*fr_pvc_info;
-+		x25_hdlc_proto		*x25;
-+
-+		/* interface settings */
-+		sync_serial_settings	*sync;
-+		te1_settings		*te1;
-+	} ifs_ifsu;
-+};
-+
-+/*
-+ * Interface request structure used for socket
-+ * ioctl's.  All interface ioctl's must have parameter
-+ * definitions which begin with ifr_name.  The
-+ * remainder may be interface specific.
-+ */
-+
-+/* for compatibility with glibc net/if.h */
-+#if __UAPI_DEF_IF_IFREQ
-+struct ifreq {
-+#define IFHWADDRLEN	6
-+	union
-+	{
-+		char	ifrn_name[IFNAMSIZ];		/* if name, e.g. "en0" */
-+	} ifr_ifrn;
-+	
-+	union {
-+		struct	sockaddr ifru_addr;
-+		struct	sockaddr ifru_dstaddr;
-+		struct	sockaddr ifru_broadaddr;
-+		struct	sockaddr ifru_netmask;
-+		struct  sockaddr ifru_hwaddr;
-+		short	ifru_flags;
-+		int	ifru_ivalue;
-+		int	ifru_mtu;
-+		struct  ifmap ifru_map;
-+		char	ifru_slave[IFNAMSIZ];	/* Just fits the size */
-+		char	ifru_newname[IFNAMSIZ];
-+		void *	ifru_data;
-+		struct	if_settings ifru_settings;
-+	} ifr_ifru;
-+};
-+#endif /* __UAPI_DEF_IF_IFREQ */
-+
-+#define ifr_name	ifr_ifrn.ifrn_name	/* interface name 	*/
-+#define ifr_hwaddr	ifr_ifru.ifru_hwaddr	/* MAC address 		*/
-+#define	ifr_addr	ifr_ifru.ifru_addr	/* address		*/
-+#define	ifr_dstaddr	ifr_ifru.ifru_dstaddr	/* other end of p-p lnk	*/
-+#define	ifr_broadaddr	ifr_ifru.ifru_broadaddr	/* broadcast address	*/
-+#define	ifr_netmask	ifr_ifru.ifru_netmask	/* interface net mask	*/
-+#define	ifr_flags	ifr_ifru.ifru_flags	/* flags		*/
-+#define	ifr_metric	ifr_ifru.ifru_ivalue	/* metric		*/
-+#define	ifr_mtu		ifr_ifru.ifru_mtu	/* mtu			*/
-+#define ifr_map		ifr_ifru.ifru_map	/* device map		*/
-+#define ifr_slave	ifr_ifru.ifru_slave	/* slave device		*/
-+#define	ifr_data	ifr_ifru.ifru_data	/* for use by interface	*/
-+#define ifr_ifindex	ifr_ifru.ifru_ivalue	/* interface index	*/
-+#define ifr_bandwidth	ifr_ifru.ifru_ivalue    /* link bandwidth	*/
-+#define ifr_qlen	ifr_ifru.ifru_ivalue	/* Queue length 	*/
-+#define ifr_newname	ifr_ifru.ifru_newname	/* New name		*/
-+#define ifr_settings	ifr_ifru.ifru_settings	/* Device/proto settings*/
-+
-+/*
-+ * Structure used in SIOCGIFCONF request.
-+ * Used to retrieve interface configuration
-+ * for machine (useful for programs which
-+ * must know all networks accessible).
-+ */
-+
-+/* for compatibility with glibc net/if.h */
-+#if __UAPI_DEF_IF_IFCONF
-+struct ifconf  {
-+	int	ifc_len;			/* size of buffer	*/
-+	union {
-+		char *ifcu_buf;
-+		struct ifreq *ifcu_req;
-+	} ifc_ifcu;
-+};
-+#endif /* __UAPI_DEF_IF_IFCONF */
-+
-+#define	ifc_buf	ifc_ifcu.ifcu_buf		/* buffer address	*/
-+#define	ifc_req	ifc_ifcu.ifcu_req		/* array of structures	*/
-+
-+#endif /* _LINUX_IF_H */

package/network/utils/ethtool/patches/101-netlink-Fix-maybe-uninitialized-meters-variable.patch

@@ -1,25 +0,0 @@
-From:   Florian Fainelli <f.fainelli@gmail.com>
-To:     netdev@vger.kernel.org
-Subject: [PATCH ethtool v2 2/3] netlink: Fix maybe uninitialized 'meters' variable
-Date:   Sat, 14 Jan 2023 08:34:10 -0800
-
-GCC12 warns that 'meters' may be uninitialized, initialize it
-accordingly.
-
-Fixes: 9561db9b76f4 ("Add cable test TDR support")
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- netlink/parser.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/netlink/parser.c
-+++ b/netlink/parser.c
-@@ -237,7 +237,7 @@ int nl_parse_direct_m2cm(struct nl_conte
- 			 struct nl_msg_buff *msgbuff, void *dest)
- {
- 	const char *arg = *nlctx->argp;
--	float meters;
-+	float meters = 0.0;
- 	uint32_t cm;
- 	int ret;
- 

package/network/utils/ethtool/patches/102-raw-marvell-c-Fix-build-with-musl-libc.patch

@@ -1,63 +0,0 @@
-From:   Florian Fainelli <f.fainelli@gmail.com>
-To:     netdev@vger.kernel.org
-Subject: [PATCH ethtool v2 3/3] marvell.c: Fix build with musl-libc
-Date:   Sat, 14 Jan 2023 08:34:11 -0800
-
-After commit 1fa60003a8b8 ("misc: header includes cleanup") we stopped
-including net/if.h which resolved the proper defines to pull in
-sys/types.h and provide a definition for u_int32_t. With musl-libc we
-would need to define _GNU_SOURCE to ensure that sys/types.h does provide a
-definition for u_int32_t.
-
-Rather, just replace u_uint{16,32}_t with the more standard
-uint{16,32}_t types from stdint.h
-
-Fixes: 1fa60003a8b8 ("misc: header includes cleanup")
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- marvell.c | 34 +++++++++++++++++-----------------
- 1 file changed, 17 insertions(+), 17 deletions(-)
-
---- a/marvell.c
-+++ b/marvell.c
-@@ -31,23 +31,23 @@ static void dump_timer(const char *name,
- static void dump_queue(const char *name, const void *a, int rx)
- {
- 	struct desc {
--		u_int32_t		ctl;
--		u_int32_t		next;
--		u_int32_t		data_lo;
--		u_int32_t		data_hi;
--		u_int32_t		status;
--		u_int32_t		timestamp;
--		u_int16_t		csum2;
--		u_int16_t		csum1;
--		u_int16_t		csum2_start;
--		u_int16_t		csum1_start;
--		u_int32_t		addr_lo;
--		u_int32_t		addr_hi;
--		u_int32_t		count_lo;
--		u_int32_t		count_hi;
--		u_int32_t               byte_count;
--		u_int32_t               csr;
--		u_int32_t               flag;
-+		uint32_t		ctl;
-+		uint32_t		next;
-+		uint32_t		data_lo;
-+		uint32_t		data_hi;
-+		uint32_t		status;
-+		uint32_t		timestamp;
-+		uint16_t		csum2;
-+		uint16_t		csum1;
-+		uint16_t		csum2_start;
-+		uint16_t		csum1_start;
-+		uint32_t		addr_lo;
-+		uint32_t		addr_hi;
-+		uint32_t		count_lo;
-+		uint32_t		count_hi;
-+		uint32_t		byte_count;
-+		uint32_t		csr;
-+		uint32_t		flag;
- 	};
- 	const struct desc *d = a;
- 

package/network/utils/iproute2/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=iproute2
-PKG_VERSION:=6.1.0
+PKG_VERSION:=6.2.0
-PKG_RELEASE:=$(AUTORELEASE)
+PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
 PKG_SOURCE_URL:=@KERNEL/linux/utils/net/iproute2
-PKG_HASH:=5ce12a0fec6b212725ef218735941b2dab76244db7e72646a76021b0537b43ab
+PKG_HASH:=4d72730200ec5b2aabaa1a2f20553c6748292f065d9a154c7d5e22559df9fd62
 PKG_BUILD_PARALLEL:=1
 PKG_BUILD_DEPENDS:=iptables
 PKG_LICENSE:=GPL-2.0

package/network/utils/iproute2/patches/110-darwin_fixes.patch

@@ -1,6 +1,6 @@
 --- a/netem/maketable.c
 +++ b/netem/maketable.c
-@@ -10,7 +10,9 @@
+@@ -11,7 +11,9 @@
  #include <stdio.h>
  #include <stdlib.h>
  #include <math.h>
@@ -12,7 +12,7 @@
  #include <sys/stat.h>
 --- a/netem/normal.c
 +++ b/netem/normal.c
-@@ -8,8 +8,12 @@
+@@ -9,8 +9,12 @@
  #include <string.h>
  #include <limits.h>
  
@@ -27,7 +27,7 @@
  #define TABLEFACTOR NETEM_DIST_SCALE
 --- a/netem/pareto.c
 +++ b/netem/pareto.c
-@@ -7,8 +7,12 @@
+@@ -8,8 +8,12 @@
  #include <math.h>
  #include <limits.h>
  
@@ -42,7 +42,7 @@
  #define TABLESIZE	16384
 --- a/netem/paretonormal.c
 +++ b/netem/paretonormal.c
-@@ -14,10 +14,13 @@
+@@ -15,10 +15,13 @@
  #include <string.h>
  #include <math.h>
  #include <limits.h>

package/network/utils/iproute2/patches/115-add-config-xtlibdir.patch

@@ -1,6 +1,6 @@
 --- a/tc/Makefile
 +++ b/tc/Makefile
-@@ -128,6 +128,9 @@ CFLAGS += -DCONFIG_GACT -DCONFIG_GACT_PR
+@@ -127,6 +127,9 @@ CFLAGS += -DCONFIG_GACT -DCONFIG_GACT_PR
  ifneq ($(IPT_LIB_DIR),)
  	CFLAGS += -DIPT_LIB_DIR=\"$(IPT_LIB_DIR)\"
  endif

package/network/utils/iproute2/patches/140-allow_pfifo_fast.patch

@@ -1,6 +1,6 @@
 --- a/tc/q_fifo.c
 +++ b/tc/q_fifo.c
-@@ -95,5 +95,6 @@ struct qdisc_util pfifo_head_drop_qdisc_
+@@ -90,5 +90,6 @@ struct qdisc_util pfifo_head_drop_qdisc_
  
  struct qdisc_util pfifo_fast_qdisc_util = {
  	.id = "pfifo_fast",

package/network/utils/iproute2/patches/140-keep_libmnl_optional.patch

@@ -1,6 +1,6 @@
 --- a/configure
 +++ b/configure
-@@ -412,7 +412,7 @@ check_tirpc()
+@@ -411,7 +411,7 @@ check_tirpc()
  
  check_mnl()
  {

package/network/utils/iproute2/patches/145-keep_libelf_optional.patch

@@ -1,6 +1,6 @@
 --- a/configure
 +++ b/configure
-@@ -267,7 +267,7 @@ EOF
+@@ -266,7 +266,7 @@ EOF
  
  check_elf()
  {

package/network/utils/iproute2/patches/150-keep_libcap_optional.patch

@@ -1,6 +1,6 @@
 --- a/configure
 +++ b/configure
-@@ -470,7 +470,7 @@ EOF
+@@ -469,7 +469,7 @@ EOF
  
  check_cap()
  {

package/network/utils/iproute2/patches/155-keep_tirpc_optional.patch

@@ -1,6 +1,6 @@
 --- a/configure
 +++ b/configure
-@@ -399,7 +399,7 @@ check_selinux()
+@@ -398,7 +398,7 @@ check_selinux()
  
  check_tirpc()
  {

package/network/utils/iproute2/patches/170-ip_tiny.patch

@@ -25,7 +25,7 @@
  		sed -n '/'$$s'[^ ]* =/{s:.* \([^ ]*'$$s'[^ ]*\) .*:extern char \1[] __attribute__((weak)); if (!strcmp(sym, "\1")) return \1;:;p}' $$files ; \
 --- a/ip/ip.c
 +++ b/ip/ip.c
-@@ -65,11 +65,17 @@ static void usage(void)
+@@ -61,11 +61,17 @@ static void usage(void)
  	fprintf(stderr,
  		"Usage: ip [ OPTIONS ] OBJECT { COMMAND | help }\n"
  		"       ip [ -force ] -batch filename\n"
@@ -43,7 +43,7 @@
  		"       OPTIONS := { -V[ersion] | -s[tatistics] | -d[etails] | -r[esolve] |\n"
  		"                    -h[uman-readable] | -iec | -j[son] | -p[retty] |\n"
  		"                    -f[amily] { inet | inet6 | mpls | bridge | link } |\n"
-@@ -92,37 +98,49 @@ static const struct cmd {
+@@ -88,37 +94,49 @@ static const struct cmd {
  	int (*func)(int argc, char **argv);
  } cmds[] = {
  	{ "address",	do_ipaddr },

package/network/utils/iproute2/patches/175-reduce-dynamic-syms.patch

@@ -1,6 +1,6 @@
 --- a/tc/Makefile
 +++ b/tc/Makefile
-@@ -114,7 +114,7 @@ LDLIBS += -L. -lm
+@@ -113,7 +113,7 @@ LDLIBS += -L. -lm
  
  ifeq ($(SHARED_LIBS),y)
  LDLIBS += -ldl
@@ -9,7 +9,7 @@
  endif
  
  TCLIB := tc_core.o
-@@ -144,7 +144,7 @@ MODDESTDIR := $(DESTDIR)$(LIBDIR)/tc
+@@ -143,7 +143,7 @@ MODDESTDIR := $(DESTDIR)$(LIBDIR)/tc
  all: tc $(TCSO)
  
  tc: $(TCOBJ) $(LIBNETLINK) libtc.a
@@ -18,7 +18,7 @@
  
  libtc.a: $(TCLIB)
  	$(QUIET_AR)$(AR) rcs $@ $^
-@@ -166,6 +166,7 @@ install: all
+@@ -165,6 +165,7 @@ install: all
  clean:
  	rm -f $(TCOBJ) $(TCLIB) libtc.a tc *.so emp_ematch.tab.h; \
  	rm -f emp_ematch.tab.*
@@ -26,7 +26,7 @@
  
  q_atm.so: q_atm.c
  	$(QUIET_CC)$(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) -shared -fpic -o q_atm.so q_atm.c -latm
-@@ -205,4 +206,16 @@ static-syms.h: $(wildcard *.c)
+@@ -204,4 +205,16 @@ static-syms.h: $(wildcard *.c)
  		sed -n '/'$$s'[^ ]* =/{s:.* \([^ ]*'$$s'[^ ]*\) .*:extern char \1[] __attribute__((weak)); if (!strcmp(sym, "\1")) return \1;:;p}' $$files ; \
  	done > $@
  

package/network/utils/iproute2/patches/180-drop_FAILED_POLICY.patch

@@ -11,7 +11,7 @@ Subject: [PATCH] add support for dropping with FAILED_POLICY
 
 --- a/ip/rtm_map.c
 +++ b/ip/rtm_map.c
-@@ -54,6 +54,8 @@ char *rtnl_rtntype_n2a(int id, char *buf
+@@ -49,6 +49,8 @@ char *rtnl_rtntype_n2a(int id, char *buf
  		return "nat";
  	case RTN_XRESOLVE:
  		return "xresolve";
@@ -20,7 +20,7 @@ Subject: [PATCH] add support for dropping with FAILED_POLICY
  	default:
  		snprintf(buf, len, "%d", id);
  		return buf;
-@@ -89,6 +91,8 @@ int rtnl_rtntype_a2n(int *id, char *arg)
+@@ -84,6 +86,8 @@ int rtnl_rtntype_a2n(int *id, char *arg)
  		res = RTN_UNICAST;
  	else if (strcmp(arg, "throw") == 0)
  		res = RTN_THROW;

package/network/utils/iproute2/patches/190-fix-nls-rpath-link.patch

@@ -1,6 +1,6 @@
 --- a/configure
 +++ b/configure
-@@ -291,7 +291,7 @@ int main(int argc, char **argv) {
+@@ -290,7 +290,7 @@ int main(int argc, char **argv) {
  }
  EOF
  
@@ -9,7 +9,7 @@
      local ret=$?
  
      rm -f $TMPDIR/libbpf_test.c $TMPDIR/libbpf_test
-@@ -309,7 +309,7 @@ int main(int argc, char **argv) {
+@@ -308,7 +308,7 @@ int main(int argc, char **argv) {
  }
  EOF
  

package/network/utils/iproute2/patches/195-build_variant_ip_tc.patch

@@ -11,7 +11,7 @@
  
 --- a/tc/Makefile
 +++ b/tc/Makefile
-@@ -141,7 +141,7 @@ MODDESTDIR := $(DESTDIR)$(LIBDIR)/tc
+@@ -140,7 +140,7 @@ MODDESTDIR := $(DESTDIR)$(LIBDIR)/tc
  	$(QUIET_CC)$(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) -shared -fpic $< -o $@
  
  

package/network/utils/iproute2/patches/200-drop_libbsd_dependency.patch

@@ -1,6 +1,6 @@
 --- a/configure
 +++ b/configure
-@@ -456,14 +456,8 @@ EOF
+@@ -455,14 +455,8 @@ EOF
      if $CC -I$INCLUDE -o $TMPDIR/strtest $TMPDIR/strtest.c >/dev/null 2>&1; then
  	echo "no"
      else

package/network/utils/iproute2/patches/300-selinux-configurable.patch

@@ -1,6 +1,6 @@
 --- a/configure
 +++ b/configure
-@@ -386,7 +386,7 @@ check_libbpf()
+@@ -385,7 +385,7 @@ check_libbpf()
  check_selinux()
  # SELinux is a compile time option in the ss utility
  {

package/network/utils/iproute2/patches/320-configure-Remove-include-sys-stat.h.patch

@@ -1,43 +0,0 @@
-From 3a3a2f6be704c970938eb8dac4eb0118f1c2fb06 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Wed, 21 Dec 2022 23:26:28 +0100
-Subject: [PATCH iproute2 v2] configure: Remove include <sys/stat.h>
-
-The check_name_to_handle_at() function in the configure script is
-including sys/stat.h. This include fails with glibc 2.36 like this:
-````
-In file included from /linux-5.15.84/include/uapi/linux/stat.h:5,
-                 from /toolchain-x86_64_gcc-12.2.0_glibc/include/bits/statx.h:31,
-                 from /toolchain-x86_64_gcc-12.2.0_glibc/include/sys/stat.h:465,
-                 from config.YExfMc/name_to_handle_at_test.c:3:
-/linux-5.15.84/include/uapi/linux/types.h:10:2: warning: #warning "Attempt to use kernel headers from user space, see https://kernelnewbies.org/KernelHeaders" [-Wcpp]
-   10 | #warning "Attempt to use kernel headers from user space, see https://kernelnewbies.org/KernelHeaders"
-      |  ^~~~~~~
-In file included from /linux-5.15.84/include/uapi/linux/posix_types.h:5,
-                 from /linux-5.15.84/include/uapi/linux/types.h:14:
-/linux-5.15.84/include/uapi/linux/stddef.h:5:10: fatal error: linux/compiler_types.h: No such file or directory
-    5 | #include <linux/compiler_types.h>
-      |          ^~~~~~~~~~~~~~~~~~~~~~~~
-compilation terminated.
-````
-
-Just removing the include works, the manpage of name_to_handle_at() says
-only fcntl.h is needed.
-
-Fixes: c5b72cc56bf8 ("lib/fs: fix issue when {name,open}_to_handle_at() is not implemented")
-Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- configure | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/configure
-+++ b/configure
-@@ -215,7 +215,6 @@ check_name_to_handle_at()
-     cat >$TMPDIR/name_to_handle_at_test.c <<EOF
- #define _GNU_SOURCE
- #include <sys/types.h>
--#include <sys/stat.h>
- #include <fcntl.h>
- int main(int argc, char **argv)
- {

target/linux/ath79/dts/ar7242_ubnt_edgeswitch-8xp.dts

@@ -160,7 +160,6 @@
 
 			phy0: port8@8 {
 				reg = <8>;
-				label = "cpu";
 				ethernet = <&eth0>;
 
 				fixed-link {

target/linux/ath79/dts/ar9132_tplink_tl-wr941-v2.dts

@@ -99,7 +99,6 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
 				ethernet = <&eth0>;
 			};
 		};

target/linux/ath79/dts/ar9344_mikrotik_routerboard-16m-nor.dtsi

@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "ar9344.dtsi"
-
 &spi {
 	status = "okay";
 
@@ -55,9 +53,3 @@
 		};
 	};
 };
-
-&wmac {
-	status = "okay";
-
-	qca,no-eeprom;
-};

target/linux/ath79/dts/ar9344_mikrotik_routerboard-911-lite.dts

@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_mikrotik_routerboard.dtsi"
+#include "ar9344_mikrotik_routerboard-16m-nor.dtsi"
+
+/ {
+	model = "MikroTik RouterBOARD 911-2Hn/5Hn (Lite2/Lite5)";
+	compatible = "mikrotik,routerboard-911-lite", "qca,ar9344";
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&enable_gpio_20>;
+
+	lan {
+		label = "green:lan";
+		gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+	};
+
+	power {
+		label = "green:power";
+		gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+		default-state = "on";
+	};
+
+	led_user: user {
+		label = "green:user";
+		gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinmux {
+	enable_gpio_20: pinmux_gpio_out_function5 {
+		pinctrl-single,bits = <0x14 0x0 0xff>;
+	};
+};

target/linux/ath79/dts/ar9344_mikrotik_routerboard-lhg-5nd.dts

@@ -1,55 +1,20 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
+#include "ar9344_mikrotik_routerboard.dtsi"
 #include "ar9344_mikrotik_routerboard-16m-nor.dtsi"
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
 / {
 	compatible = "mikrotik,routerboard-lhg-5nd", "qca,ar9344";
 	model = "MikroTik RouterBOARD LHG 5nD";
+};
 
-	aliases {
+&leds {
-		led-boot = &led_user;
-		led-failsafe = &led_user;
-		led-running = &led_user;
-		led-upgrade = &led_user;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
 	power {
 		label = "blue:power";
 		gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
 		default-state = "on";
 	};
 
-		rssilow {
-			label = "green:rssilow";
-			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-		};
-
-		rssimediumlow {
-			label = "green:rssimediumlow";
-			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-		};
-
-		rssimedium {
-			label = "green:rssimedium";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-
-		rssimediumhigh {
-			label = "green:rssimediumhigh";
-			gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
-		};
-
-		rssihigh {
-			label = "green:rssihigh";
-			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
-		};
-
 	led_user: user {
 		label = "white:user";
 		gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
@@ -59,33 +24,4 @@
 		label = "green:lan";
 		gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 	};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	phy-handle = <&swphy0>;
-
-	gmac-config {
-		device = <&gmac>;
-		switch-phy-swap = <1>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-
-	compatible = "syscon", "simple-mfd";
 };

target/linux/ath79/dts/ar9344_mikrotik_routerboard-sxt-5n.dtsi

@@ -1,185 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "ar9344.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "mikrotik,routerboard-sxt-5n", "qca,ar9344";
-	model = "MikroTik SXT 5N platform";
-
-	aliases {
-		led-boot = &led_user;
-		led-failsafe = &led_user;
-		led-running = &led_user;
-		led-upgrade = &led_user;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power {
-			label = "green:power";
-			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		rssilow {
-			label = "green:rssilow";
-			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-		};
-
-		rssimediumlow {
-			label = "green:rssimediumlow";
-			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-		};
-
-		rssimedium {
-			label = "green:rssimedium";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-
-		rssimediumhigh {
-			label = "green:rssimediumhigh";
-			gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
-		};
-
-		rssihigh {
-			label = "green:rssihigh";
-			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
-		};
-
-		led_user: user {
-			label = "green:user";
-			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-	};
-
-	gpio-export {
-		compatible = "gpio-export";
-
-		gpio_nand_power {
-			gpio-export,name = "sxt5n:power:nand";
-			gpio-export,output = <0>;
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	beeper {
-		compatible = "gpio-beeper";
-		gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&spi {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "RouterBoot";
-				reg = <0x0 0x20000>;
-				compatible = "mikrotik,routerboot-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					label = "bootloader1";
-					reg = <0x0 0x0>;
-					read-only;
-				};
-
-				hard_config {
-					read-only;
-				};
-
-				bios {
-					size = <0x1000>;
-					read-only;
-				};
-
-				soft_config {
-				};
-
-				partition@10000 {
-					label = "bootloader2";
-					reg = <0x10000 0x10000>;
-					read-only;
-				};
-			};
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	nand-ecc-mode = "soft";
-	qca,nand-swap-dma;
-	qca,nand-scan-fixup;
-
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "booter";
-			reg = <0x0000000 0x0040000>;
-			read-only;
-		};
-
-		partition@40000 {
-			label = "kernel";
-			reg = <0x0040000 0x03c0000>;
-		};
-
-		partition@400000 {
-			label = "ubi";
-			reg = <0x0400000 0x7c00000>;
-		};
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	phy-handle = <&swphy0>;
-
-	gmac-config {
-		device = <&gmac>;
-		switch-phy-swap = <1>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-
-	compatible = "syscon", "simple-mfd";
-};
-
-&wmac {
-	status = "okay";
-
-	qca,no-eeprom;
-};

target/linux/ath79/dts/ar9344_mikrotik_routerboard-sxt-5nd-r2.dts

@@ -1,8 +1,114 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "ar9344_mikrotik_routerboard-sxt-5n.dtsi"
+#include "ar9344_mikrotik_routerboard.dtsi"
 
 / {
 	compatible = "mikrotik,routerboard-sxt-5nd-r2", "qca,ar9344";
 	model = "MikroTik RouterBOARD SXT 5nD r2 (SXT Lite5)";
+
+	gpio-export {
+		compatible = "gpio-export";
+
+		gpio_nand_power {
+			gpio-export,name = "sxt5n:power:nand";
+			gpio-export,output = <0>;
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	beeper {
+		compatible = "gpio-beeper";
+		gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&leds {
+	power {
+		label = "green:power";
+		gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+		default-state = "on";
+	};
+
+	led_user: user {
+		label = "green:user";
+		gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "RouterBoot";
+				reg = <0x0 0x20000>;
+				compatible = "mikrotik,routerboot-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "bootloader1";
+					reg = <0x0 0x0>;
+					read-only;
+				};
+
+				hard_config {
+					read-only;
+				};
+
+				bios {
+					size = <0x1000>;
+					read-only;
+				};
+
+				soft_config {
+				};
+
+				partition@10000 {
+					label = "bootloader2";
+					reg = <0x10000 0x10000>;
+					read-only;
+				};
+			};
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	nand-ecc-mode = "soft";
+	qca,nand-swap-dma;
+	qca,nand-scan-fixup;
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "booter";
+			reg = <0x0000000 0x0040000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "kernel";
+			reg = <0x0040000 0x03c0000>;
+		};
+
+		partition@400000 {
+			label = "ubi";
+			reg = <0x0400000 0x7c00000>;
+		};
+	};
 };

target/linux/ath79/dts/ar9344_mikrotik_routerboard.dtsi

@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		led-boot = &led_user;
+		led-failsafe = &led_user;
+		led-running = &led_user;
+		led-upgrade = &led_user;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		rssilow {
+			label = "green:rssilow";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+		};
+
+		rssimediumlow {
+			label = "green:rssimediumlow";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		};
+
+		rssimedium {
+			label = "green:rssimedium";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+
+		rssimediumhigh {
+			label = "green:rssimediumhigh";
+			gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+		};
+
+		rssihigh {
+			label = "green:rssihigh";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	phy-handle = <&swphy0>;
+
+	gmac-config {
+		device = <&gmac>;
+		switch-phy-swap = <1>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+
+	compatible = "syscon", "simple-mfd";
+};
+
+&wmac {
+	status = "okay";
+
+	qca,no-eeprom;
+};

target/linux/ath79/dts/qca9563_glinet_gl-x1200-nor-nand.dts

@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_glinet_gl-x1200.dtsi"
+
+/ {
+	compatible = "glinet,gl-x1200-nor-nand", "qca,qca9563";
+	model = "GL.iNet GL-X1200 (NOR/NAND)";
+};
+
+&nor_partitions {
+	partition@60000 {
+		label = "kernel";
+		reg = <0x060000 0x400000>;
+
+		/*
+		 * U-Boot bootcmd is "bootm 0x9f060000".
+		 * So this might be possible to resize in the future.
+		 */
+	};
+
+	partition@460000 {
+		label = "nor_reserved";
+		reg = <0x460000 0xba0000>;
+	};
+};
+
+&nand_ubi {
+	label = "ubi";
+};

target/linux/ath79/dts/qca9563_glinet_gl-x1200-nor.dts

@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_glinet_gl-x1200.dtsi"
+
+/ {
+	compatible = "glinet,gl-x1200-nor", "qca,qca9563";
+	model = "GL.iNet GL-X1200 (NOR)";
+};
+
+&nor_partitions {
+	partition@60000 {
+		compatible = "denx,uimage";
+		label = "firmware";
+		reg = <0x060000 0xfa0000>;
+	};
+};

target/linux/ath79/dts/qca9563_glinet_gl-x1200.dtsi

@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		led-boot = &led_system;
+		led-failsafe = &led_system;
+		led-running = &led_system;
+		led-upgrade = &led_system;
+		label-mac-device = &eth0;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&jtag_disable_pins>;
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_system: system {
+			label = "red:system";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		wlan2g {
+			label = "green:wlan2g";
+			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		wlan5g {
+			label = "green:wlan5g";
+			gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tpt";
+		};
+	};
+
+	gpio-export {
+		compatible = "gpio-export";
+
+		gpio_modem1_power {
+			gpio-export,name = "gl-x1200:4g1:power";
+			gpio-export,output = <0>;
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+		};
+
+		gpio_modem2_power {
+			gpio-export,name = "gl-x1200:4g2:power";
+			gpio-export,output = <0>;
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		nor_partitions: partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "u-boot-env";
+				reg = <0x040000 0x010000>;
+			};
+
+			partition@50000 {
+				label = "art";
+				reg = <0x050000 0x010000>;
+				read-only;
+
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				calibration_ath9k: calibration@1000 {
+					reg = <0x1000 0x440>;
+				};
+
+				calibration_ath10k: calibration@5000 {
+					reg = <0x5000 0x2f20>;
+				};
+
+				macaddr_art_0: macaddr@0 {
+					reg = <0x0 0x6>;
+				};
+
+				macaddr_art_1002: macaddr@1002 {
+					reg = <0x1002 0x6>;
+				};
+
+				macaddr_art_5006: macaddr@5006 {
+					reg = <0x5006 0x6>;
+				};
+			};
+
+			/* Firmware / Kernel flash type specific */
+		};
+	};
+
+	flash@1 {
+		compatible = "spi-nand";
+		reg = <1>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			nand_ubi: partition@0 {
+				label = "nand_ubi";
+				reg = <0x000000 0x8000000>;
+			};
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	phy-handle = <&phy0>;
+
+	nvmem-cells = <&macaddr_art_0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gpio {
+	usb_vbus {
+		gpio-hog;
+		gpios = <7 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-vbus";
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		phy-mode = "sgmii";
+		qca,ar8327-initvals = <
+			0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+			0x7c 0x0000007e /* PORT0_STATUS */
+		>;
+	};
+};
+
+&pcie {
+	status = "okay";
+
+	wifi@0,0 {
+		compatible = "qcom,ath10k";
+		reg = <0 0 0 0 0>;
+
+		nvmem-cells = <&macaddr_art_5006>, <&calibration_ath10k>;
+		nvmem-cell-names = "mac-address", "pre-calibration";
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb_phy0 {
+	status = "okay";
+};
+
+&usb_phy1 {
+	status = "okay";
+};
+
+&wmac {
+	status = "okay";
+
+	nvmem-cells = <&macaddr_art_1002>, <&calibration_ath9k>;
+	nvmem-cell-names = "mac-address", "calibration";
+};

target/linux/ath79/image/mikrotik.mk

@@ -9,6 +9,16 @@ define Device/mikrotik_routerboard-493g
 endef
 TARGET_DEVICES += mikrotik_routerboard-493g
 
+define Device/mikrotik_routerboard-911-lite
+  $(Device/mikrotik_nor)
+  SOC := ar9344
+  DEVICE_MODEL := RouterBOARD 911 Lite2/Lite5 (2Hn/5Hn)
+  DEVICE_PACKAGES += rssileds
+  IMAGE_SIZE := 16256k
+  SUPPORTED_DEVICES += rb-911-2hn rb-911-5hn
+endef
+TARGET_DEVICES += mikrotik_routerboard-911-lite
+
 define Device/mikrotik_routerboard-912uag-2hpnd
   $(Device/mikrotik_nand)
   SOC := ar9342

target/linux/ath79/image/nand.mk

@@ -212,6 +212,35 @@ define Device/glinet_gl-xe300
 endef
 TARGET_DEVICES += glinet_gl-xe300
 
+define Device/glinet_gl-x1200-common
+  SOC := qca9563
+  DEVICE_VENDOR := GL.iNet
+  DEVICE_MODEL := GL-X1200
+  DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct-htt kmod-usb2 \
+	kmod-usb-storage block-mount kmod-usb-net-qmi-wwan uqmi
+  IMAGE_SIZE := 16000k
+endef
+
+define Device/glinet_gl-x1200-nor-nand
+  $(Device/glinet_gl-x1200-common)
+  DEVICE_VARIANT := NOR/NAND
+  KERNEL_SIZE := 4096k
+  IMAGE_SIZE := 131072k
+  PAGESIZE := 2048
+  VID_HDR_OFFSET := 2048
+  BLOCKSIZE := 128k
+  IMAGES += factory.img
+  IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += glinet_gl-x1200-nor-nand
+
+define Device/glinet_gl-x1200-nor
+  $(Device/glinet_gl-x1200-common)
+  DEVICE_VARIANT := NOR
+endef
+TARGET_DEVICES += glinet_gl-x1200-nor
+
 define Device/linksys_ea4500-v3
   SOC := qca9558
   DEVICE_VENDOR := Linksys

target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds

@@ -6,6 +6,16 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
+mikrotik,routerboard-911-lite|\
+mikrotik,routerboard-lhg-5nd)
+	ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100"
+	ucidef_set_led_rssi "rssimediumlow" "rssimediumlow" "green:rssimediumlow" "wlan0" "20" "100"
+	ucidef_set_led_rssi "rssimedium" "rssimedium" "green:rssimedium" "wlan0" "40" "100"
+	ucidef_set_led_rssi "rssimediumhigh" "rssimediumhigh" "green:rssimediumhigh" "wlan0" "60" "100"
+	ucidef_set_led_rssi "rssihigh" "rssihigh" "green:rssihigh" "wlan0" "80" "100"
+	;;
 mikrotik,routerboard-951ui-2nd|\
 mikrotik,routerboard-952ui-5ac2nd)
 	ucidef_set_led_netdev "port1" "port1" "green:port1" "eth1"
@@ -19,15 +29,6 @@ mikrotik,routerboard-mapl-2nd|\
 mikrotik,routerboard-wap-2nd)
 	ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
 	;;
-mikrotik,routerboard-lhg-5nd)
-	ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
-	ucidef_set_rssimon "wlan0" "200000" "1"
-	ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100"
-	ucidef_set_led_rssi "rssimediumlow" "rssimediumlow" "green:rssimediumlow" "wlan0" "20" "100"
-	ucidef_set_led_rssi "rssimedium" "rssimedium" "green:rssimedium" "wlan0" "40" "100"
-	ucidef_set_led_rssi "rssimediumhigh" "rssimediumhigh" "green:rssimediumhigh" "wlan0" "60" "100"
-	ucidef_set_led_rssi "rssihigh" "rssihigh" "green:rssihigh" "wlan0" "80" "100"
-	;;
 mikrotik,routerboard-map-2nd)
 	ucidef_set_led_netdev "eth_1" "eth_1" "green:eth_1" "eth1"
 	ucidef_set_led_switch "eth_2" "eth_2" "green:eth_2" "switch0" "0x4"

target/linux/ath79/mikrotik/base-files/etc/board.d/02_network

@@ -14,6 +14,7 @@ ath79_setup_interfaces()
 		ucidef_add_switch "switch1" \
 			"0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
 		;;
+	mikrotik,routerboard-911-lite|\
 	mikrotik,routerboard-912uag-2hpnd|\
 	mikrotik,routerboard-lhg-2nd|\
 	mikrotik,routerboard-lhg-5nd|\
@@ -52,6 +53,7 @@ ath79_setup_macs()
 	local mac_base="$(cat /sys/firmware/mikrotik/hard_config/mac_base)"
 
 	case "$board" in
+	mikrotik,routerboard-911-lite|\
 	mikrotik,routerboard-912uag-2hpnd|\
 	mikrotik,routerboard-lhg-2nd|\
 	mikrotik,routerboard-lhg-5nd|\

target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom

@@ -23,6 +23,7 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath9k-eeprom-ahb-18100000.wmac.bin")
 	case $board in
+	mikrotik,routerboard-911-lite|\
 	mikrotik,routerboard-912uag-2hpnd|\
 	mikrotik,routerboard-lhg-2nd|\
 	mikrotik,routerboard-lhg-5nd|\

target/linux/ath79/nand/base-files/etc/board.d/02_network

@@ -30,6 +30,11 @@ ath79_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth0" "4:lan"
 		;;
+	glinet,gl-x1200-nor|\
+	glinet,gl-x1200-nor-nand)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
+		;;
 	linksys,ea4500-v3)
 		ucidef_add_switch "switch0" \
 			"6@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
@@ -88,6 +93,11 @@ ath79_setup_macs()
 		wan_mac=$(mtd_get_mac_binary art 0x0)
 		label_mac=$wan_mac
 		;;
+	glinet,gl-x1200-nor|\
+	glinet,gl-x1200-nor-nand)
+		wan_mac=$(mtd_get_mac_binary art 0x0)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		;;
 	netgear,wndr3700-v4|\
 	netgear,wndr4300|\
 	netgear,wndr4300sw|\

target/linux/ath79/nand/base-files/lib/upgrade/platform.sh

@@ -19,7 +19,9 @@ platform_do_upgrade() {
 		glinet_nand_nor_do_upgrade "$1"
 		;;
 	glinet,gl-ar750s-nor|\
-	glinet,gl-ar750s-nor-nand)
+	glinet,gl-ar750s-nor-nand|\
+	glinet,gl-x1200-nor|\
+	glinet,gl-x1200-nor-nand)
 		nand_nor_do_upgrade "$1"
 		;;
 	*)

target/linux/bcm53xx/base-files/etc/board.d/02_network

@@ -16,6 +16,9 @@ bcm53xx_setup_interfaces()
 	asus,rt-ac88u)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 extsw" "wan"
 		;;
+	dlink,dwl-8610ap)
+		ucidef_set_interface_lan "eth0 eth1" "dhcp"
+		;;
 	linksys,panamera)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5 lan6 lan7 lan8 extsw" "wan"
 		;;

target/linux/bcm53xx/image/Makefile

@@ -105,6 +105,22 @@ define Build/seama-nand
 		-i $@.entity
 endef
 
+define Build/dwl8610ap-image
+	mkdir -p $@.tmptar
+	# The DWL8610AP pretends to be a Broadcom reference design
+	echo "bcm953012er" > $@.tmptar/board
+	echo "LVL7" > $@.tmptar/model
+	# Something high beyond what D-Link has put out
+	echo "5.0.0.0" > $@.tmptar/version
+	# Create rootfs.bin, this is just a NAND image including everything
+	cp $@ $@.tmptar/rootfs.bin
+	# Hash the rootfs.bin
+	cat $@.tmptar/rootfs.bin | md5sum > $@.tmptar/rootfs.md5
+	cd $@.tmptar && tar -c -f $@.new *
+	rm -rf $@.tmptar
+	mv $@.new $@
+endef
+
 DEVICE_VARS += ASUS_PRODUCTID
 DEVICE_VARS += BUFFALO_TAG_PLATFORM BUFFALO_TAG_VERSION BUFFALO_TAG_MINOR
 DEVICE_VARS += SIGNATURE
@@ -250,6 +266,15 @@ define Device/dlink_dir-885l
 endef
 TARGET_DEVICES += dlink_dir-885l
 
+define Device/dlink_dwl-8610ap
+  DEVICE_VENDOR := D-Link
+  DEVICE_MODEL := DWL-8610AP
+  DEVICE_PACKAGES := $(B43)
+  IMAGES := factory.tar
+  IMAGE/factory.tar := append-ubi | trx-nand | dwl8610ap-image
+endef
+TARGET_DEVICES += dlink_dwl-8610ap
+
 define Device/linksys_ea6300-v1
   DEVICE_VENDOR := Linksys
   DEVICE_MODEL := EA6300

target/linux/bmips/dts/bcm6318.dtsi

@@ -400,7 +400,6 @@
 
 				port@8 {
 					reg = <8>;
-					label = "cpu";
 
 					phy-mode = "internal";
 					ethernet = <&ethernet>;

target/linux/bmips/dts/bcm63268.dtsi

@@ -521,7 +521,6 @@
 
 				port@8 {
 					reg = <8>;
-					label = "cpu";
 
 					phy-mode = "internal";
 					ethernet = <&ethernet>;

target/linux/bmips/dts/bcm6328.dtsi

@@ -418,7 +418,6 @@
 
 				port@8 {
 					reg = <8>;
-					label = "cpu";
 
 					phy-mode = "internal";
 					ethernet = <&ethernet>;

target/linux/bmips/dts/bcm6362.dtsi

@@ -515,7 +515,6 @@
 
 				port@8 {
 					reg = <8>;
-					label = "cpu";
 
 					phy-mode = "internal";
 					ethernet = <&ethernet>;

target/linux/bmips/dts/bcm6368.dtsi

@@ -529,7 +529,6 @@
 
 				port@8 {
 					reg = <8>;
-					label = "cpu";
 
 					phy-mode = "internal";
 					ethernet = <&ethernet>;

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi

@@ -100,6 +100,16 @@
 			status = "okay";
 		};
 	};
+
+	regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&tlmm 68 GPIO_ACTIVE_LOW>;
+	};
 };
 
 
@@ -268,7 +278,7 @@
 			pins =  "gpio55", "gpio56", "gpio57",
 				"gpio60", "gpio62", "gpio63",
 				"gpio64", "gpio65", "gpio66",
-				"gpio67", "gpio68", "gpio69";
+				"gpio67", "gpio69";
 			function = "qpic";
 			bias-pull-down;
 		};

target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-4i-edge-200.dts

@@ -112,7 +112,6 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
 				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 

target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-ea3500.dts

@@ -125,7 +125,6 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;

target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi

@@ -447,7 +447,6 @@
 
 				port@6 {
 					reg = <0x6>;
-					label = "cpu";
 					phy-mode = "internal";
 					ethernet = <&eth0>;
 

target/linux/mediatek/dts/mt7622-elecom-wrc-x3200gst3.dts

@@ -258,7 +258,6 @@
 
 				port@6 {
 					reg = <6>;
-					label = "cpu";
 					ethernet = <&gmac0>;
 					phy-mode = "2500base-x";
 

target/linux/mediatek/dts/mt7622-linksys-e8450.dtsi

@@ -181,7 +181,6 @@
 
 				port@6 {
 					reg = <6>;
-					label = "cpu";
 					ethernet = <&gmac0>;
 					phy-mode = "2500base-x";
 

target/linux/mediatek/dts/mt7622-netgear-wax206.dts

@@ -191,7 +191,6 @@
 
 				port@6 {
 					ethernet = <&gmac0>;
-					label = "cpu";
 					phy-mode = "2500base-x";
 					reg = <6>;
 

target/linux/mediatek/dts/mt7622-ruijie-rg-ew3200.dtsi

@@ -137,7 +137,6 @@
 
 				port@6 {
 					reg = <6>;
-					label = "cpu";
 					ethernet = <&gmac0>;
 					phy-mode = "2500base-x";
 

target/linux/mediatek/dts/mt7622-xiaomi-redmi-router-ax6s.dts

@@ -196,7 +196,6 @@
 
 				port@6 {
 					reg = <6>;
-					label = "cpu";
 					ethernet = <&gmac0>;
 					phy-mode = "2500base-x";
 

target/linux/mediatek/dts/mt7623a-unielec-u7623-02.dtsi

@@ -178,7 +178,6 @@
 
 		cpu_port0: port@6 {
 			reg = <6>;
-			label = "cpu";
 			ethernet = <&gmac0>;
 			phy-mode = "trgmii";
 

target/linux/mediatek/dts/mt7629-iptime-a6004mx.dts

@@ -161,7 +161,6 @@
 
 				port@6 {
 					reg = <6>;
-					label = "cpu";
 					ethernet = <&gmac0>;
 					phy-mode = "2500base-x";
 

target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3.dts

@@ -223,7 +223,6 @@
 
 		port@6 {
 			reg = <6>;
-			label = "cpu";
 			ethernet = <&gmac0>;
 			phy-mode = "2500base-x";
 

target/linux/mediatek/dts/mt7986a-xiaomi-redmi-router-ax6000.dtsi

@@ -234,7 +234,6 @@
 
 		port@6 {
 			reg = <6>;
-			label = "cpu";
 			ethernet = <&gmac0>;
 			phy-mode = "2500base-x";
 

target/linux/mediatek/files-5.15/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dtsi

@@ -350,7 +350,6 @@
 
 		port@6 {
 			reg = <6>;
-			label = "cpu";
 			ethernet = <&gmac0>;
 			phy-mode = "2500base-x";
 

target/linux/mediatek/files-5.15/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts

@@ -139,7 +139,6 @@
 
 				port@6 {
 					reg = <6>;
-					label = "cpu";
 					ethernet = <&gmac0>;
 					phy-mode = "2500base-x";
 

target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network

@@ -61,6 +61,7 @@ mvebu_setup_macs()
 	local label_mac=""
 
 	case "$board" in
+	buffalo,ls220de|\
 	buffalo,ls421de)
 		lan_mac=$(mtd_get_mac_ascii u-boot-env eth1addr)
 		;;

target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh

@@ -25,6 +25,13 @@ platform_check_image() {
 
 platform_do_upgrade() {
 	case "$(board_name)" in
+	buffalo,ls220de)
+		# Kernel UBI volume name must be "boot"
+		CI_KERNPART=boot
+		CI_KERN_UBIPART=ubi_kernel
+		CI_ROOT_UBIPART=ubi
+		nand_do_upgrade "$1"
+		;;
 	buffalo,ls421de)
 		nand_do_upgrade "$1"
 		;;

target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls220de.dts

@@ -0,0 +1,380 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device Tree file for Buffalo LinkStation LS220DE
+ *
+ * Copyright (C) 2023 Daniel González Cabanelas <dgcbueu@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+#include "mvebu-linkstation-fan.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	model = "Buffalo LinkStation LS220DE";
+	compatible = "buffalo,ls220de", "marvell,armada370", "marvell,armada-370-xp";
+
+	aliases {
+		led-boot = &led_boot;
+		led-failsafe = &led_failsafe;
+		led-running = &led_power;
+		led-upgrade = &led_upgrade;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+		append-rootblock = "nullparameter="; /* override the bootloader args */
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+	};
+
+	system_fan: gpio_fan {
+		gpios = <&gpio0 13 GPIO_ACTIVE_HIGH
+			 &gpio0 14 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+
+		#cooling-cells = <2>;
+	};
+
+	thermal-zones {
+		hdd-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */
+
+			trips {
+				hdd_alert1: trip1 {
+					temperature = <34000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+				hdd_alert2: trip2 {
+					temperature = <40000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+				hdd_alert3: trip3 {
+					temperature = <45000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				hdd_hot {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				hdd_crit {
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&hdd_alert1>;
+					cooling-device = <&system_fan THERMAL_NO_LIMIT 1>;
+				};
+				map2 {
+					trip = <&hdd_alert2>;
+					cooling-device = <&system_fan 2 2>;
+				};
+				map3 {
+					trip = <&hdd_alert3>;
+					cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power Switch";
+			linux,code = <KEY_POWER>;
+			linux,input-type = <EV_SW>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		function {
+			label = "Function Button";
+			linux,code = <KEY_CONFIG>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
+
+		indicator_red {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+
+		led_power: power_white {
+			label = "white:power";
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led_failsafe: power_red {
+			label = "red:power";
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_upgrade: power_orange {
+			label = "amber:power";
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_boot: indicator_white {
+			label = "white:indicator";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd1_red {
+			function = LED_FUNCTION_DISK;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "ata1";
+			function-enumerator = <1>;
+		};
+
+		hdd2_red {
+			function = LED_FUNCTION_DISK;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "ata2";
+			function-enumerator = <2>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_hdd1 &pmx_power_hdd2>;
+		pinctrl-names = "default";
+
+		sata1_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "HDD1";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			startup-delay-us = <2000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata2_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD2";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			startup-delay-us = <4000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&coherencyfab {
+	broken-idle;
+};
+
+&eth1 {
+	pinctrl-0 = <&ge1_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-handle = <&ethphy0>;
+	phy-connection-type = "rgmii-id";
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+		marvell,reg-init = <0x3 0x10 0xf000 0x091A>, /* LED function */
+				   <0x3 0x11 0x0000 0x4401>, /* LED polarity */
+				   <0x3 0x12 0x0000 0x4905>; /* LED timer */
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ubi_kernel";
+				reg = <0x00000000 0x02000000>; /* 32 MiB */
+			};
+
+			partition@2000000 {
+				label = "ubi";
+				reg = <0x02000000 0x1df00000>; /* 479 MiB */
+			};
+		};
+	};
+};
+
+&sata {
+	nr-ports = <2>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hdd0_temp: sata-port@0 {
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	hdd1_temp: sata-port@1 {
+		reg = <1>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-0 = <&spi0_pins2>;
+	pinctrl-names = "default";
+
+	spi-flash@0 {
+		compatible = "mxicy,mx25l8005", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x00000 0xf0000>; /* 960 KiB*/
+				label = "u-boot";
+				read-only;
+			};
+			partition@f0000 {
+				reg = <0xf0000 0x10000>; /* 64 KiB */
+				label = "u-boot-env";
+			};
+		};
+	};
+};
+
+&pmsu {
+	pinctrl-0 = <&pmx_power_cpu>;
+	pinctrl-names = "default";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pmx_power_hdd2: pmx-power-hdd2 {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_cpu: pmx-power-cpu {
+		marvell,pins = "mpp4";
+		marvell,function = "vdd";
+	};
+
+	pmx_power_hdd1: pmx-power-hdd1 {
+		marvell,pins = "mpp8";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_lock: pmx-fan-lock {
+		marvell,pins = "mpp10";
+		marvell,function = "gpio";
+	};
+
+	pmx_hdd_present: pmx-hdd-present {
+		marvell,pins = "mpp11", "mpp12";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_high: pmx-fan-high {
+		marvell,pins = "mpp13";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_low: pmx-fan-low {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp15", "mpp16";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds1: pmx-leds {
+		marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61";
+		marvell,function = "gpo";
+	};
+
+	pmx_leds2: pmx-leds {
+		marvell,pins = "mpp55", "mpp57", "mpp62";
+		marvell,function = "gpio";
+	};
+};

target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts

@@ -184,7 +184,6 @@
 
 			switch0port0: port@0 {
 				reg = <0>;
-				label = "cpu";
 				ethernet = <&eth0>;
 			};
 

target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts

@@ -175,7 +175,6 @@
 
 			port@0 {
 				reg = <0>;
-				label = "cpu";
 				ethernet = <&eth0>;
 			};
 

target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts

@@ -339,7 +339,6 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
 				ethernet = <&cp0_eth1>;
 				phy-mode = "2500base-x";
 				managed = "in-band-status";

target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts

@@ -6,6 +6,7 @@
  */
 
 #include "cn9130.dtsi"
+#include "puzzle-thermal.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -109,26 +110,18 @@
 			chassis_fan_group0: fan-group@0 {
 				#cooling-cells = <2>;
 				reg = <0x00>;
-				cooling-levels = <64 102 170 230 250>;
+				cooling-levels = <80 102 170 230 255>;
 			};
 		};
 	};
 };
 
-&ap_thermal_cpu1 {
+&ap_thermal_ic {
-	trips {
+	PUZZLE_FAN_THERMAL(ic, &chassis_fan_group0);
-		cpu_active: cpu-active {
+};
-			temperature = <44000>;
+
-			hysteresis = <2000>;
+&cp0_thermal_ic {
-			type = "active";
+	PUZZLE_FAN_THERMAL(cp0, &chassis_fan_group0);
-		};
-	};
-	cooling-maps {
-		fan-map {
-			trip = <&cpu_active>;
-			cooling-device = <&chassis_fan_group0 64 THERMAL_NO_LIMIT>;
-		};
-	};
 };
 
 /* on-board eMMC - U9 */
@@ -396,6 +389,10 @@
 	};
 };
 
+&cp1_thermal_ic {
+	PUZZLE_FAN_THERMAL(cp1, &chassis_fan_group0);
+};
+
 &cp1_usb3_1 {
 	status = "okay";
 	phys = <&cp1_comphy3 1>;

target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts

@@ -6,6 +6,7 @@
  */
 
 #include "cn9130.dtsi"
+#include "puzzle-thermal.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -154,28 +155,21 @@
 			chassis_fan_group0: fan-group@0 {
 				#cooling-cells = <2>;
 				reg = <0x00>;
-				cooling-levels = <64 102 170 230 250>;
+				cooling-levels = <80 102 170 230 255>;
 			};
 		};
 	};
 };
 
-&ap_thermal_cpu1 {
+&ap_thermal_ic {
-	trips {
+	PUZZLE_FAN_THERMAL(ic, &chassis_fan_group0);
-		cpu_active: cpu-active {
-			temperature = <44000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-	};
-	cooling-maps {
-		fan-map {
-			trip = <&cpu_active>;
-			cooling-device = <&chassis_fan_group0 64 THERMAL_NO_LIMIT>;
-		};
-	};
 };
 
+&cp0_thermal_ic {
+	PUZZLE_FAN_THERMAL(cp0, &chassis_fan_group0);
+};
+
+
 /* on-board eMMC - U9 */
 &ap_sdhci0 {
 	pinctrl-names = "default";
@@ -447,6 +441,10 @@
 	};
 };
 
+&cp1_thermal_ic {
+	PUZZLE_FAN_THERMAL(cp1, &chassis_fan_group0);
+};
+
 /*
  * Instantiate the second connected CP115
  */
@@ -562,3 +560,7 @@
 		};
 	};
 };
+
+&cp2_thermal_ic {
+	PUZZLE_FAN_THERMAL(cp2, &chassis_fan_group0);
+};

target/linux/mvebu/files/arch/arm64/boot/dts/marvell/puzzle-thermal.dtsi

@@ -0,0 +1,41 @@
+#define PUZZLE_FAN_THERMAL(_cname, _fan)					\
+	trips {									\
+		_cname##_active_high: cpu-active-high {				\
+			temperature = <80000>;					\
+			hysteresis = <2000>;					\
+			type = "active";					\
+		};								\
+		_cname##_active_med: cpu-active-med {				\
+			temperature = <72000>;					\
+			hysteresis = <2000>;					\
+			type = "active";					\
+		};								\
+		_cname##_active_low: cpu-active-low {				\
+			temperature = <65000>;					\
+			hysteresis = <2000>;					\
+			type = "active";					\
+		};								\
+		_cname##_active_idle: cpu-active-idle {				\
+			temperature = <60000>;					\
+			hysteresis = <2000>;					\
+			type = "active";					\
+		};								\
+	};									\
+	cooling-maps {								\
+		cpu-active-high {						\
+			trip = <&_cname##_active_high>;				\
+			cooling-device = <_fan 3 THERMAL_NO_LIMIT>;		\
+		};								\
+		cpu-active-med {						\
+			trip = <&_cname##_active_med>;				\
+			cooling-device = <_fan 2 THERMAL_NO_LIMIT>;		\
+		};								\
+		cpu-active-low {						\
+			trip = <&_cname##_active_low>;				\
+			cooling-device = <_fan 1 THERMAL_NO_LIMIT>;		\
+		};								\
+		cpu-active-idle {						\
+			trip = <&_cname##_active_idle>;				\
+			cooling-device = <_fan 0 THERMAL_NO_LIMIT>;		\
+		};								\
+	}

target/linux/mvebu/image/Makefile

@@ -53,6 +53,16 @@ define Build/buffalo-kernel-jffs2
 	rm -rf $(KDIR)/kernel_jffs2 $@.fakerd
 endef
 
+define Build/buffalo-kernel-ubifs
+	rm -rf $@-ubidir
+	mkdir -p $@-ubidir
+	mv $@ $@-ubidir/uImage.buffalo
+	touch $@
+	$(call Build/append-uImage-fakehdr, ramdisk)
+	mv $@ $@-ubidir/initrd.buffalo
+	$(STAGING_DIR_HOST)/bin/mkfs.ubifs $(KERNEL_UBIFS_OPTS) -r $@-ubidir $@
+endef
+
 # Some info about Ctera firmware:
 # 1. It's simple tar file (GNU standard), but it must have ".firm" suffix.
 # 2. It contains two images: kernel and romdisk. Both are required.

target/linux/mvebu/image/cortexa9.mk

@@ -14,6 +14,21 @@ define Device/kernel-size-migration
 	Upgrade via sysupgrade mechanism is not possible, so new installation via factory style image is required.
 endef
 
+define Device/buffalo_ls220de
+  $(Device/NAND-128K)
+  DEVICE_VENDOR := Buffalo
+  DEVICE_MODEL := LinkStation LS220DE
+  KERNEL_UBIFS_OPTS = -m $$(PAGESIZE) -e 124KiB -c 172 -x none
+  KERNEL := kernel-bin | append-dtb | uImage none | buffalo-kernel-ubifs
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none
+  DEVICE_DTS := armada-370-buffalo-ls220de
+  DEVICE_PACKAGES :=  \
+    kmod-hwmon-gpiofan kmod-hwmon-drivetemp kmod-linkstation-poweroff \
+    kmod-md-mod kmod-md-raid0 kmod-md-raid1 kmod-md-raid10 kmod-fs-xfs \
+    mdadm mkf2fs e2fsprogs partx-utils
+endef
+TARGET_DEVICES += buffalo_ls220de
+
 define Device/buffalo_ls421de
   $(Device/NAND-128K)
   DEVICE_VENDOR := Buffalo

target/linux/mvebu/patches-5.10/903-drivers-hwmon-Add-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch

@@ -53,7 +53,7 @@ Cc: Robert Marko <robert.marko@sartura.hr>
  obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o
 --- /dev/null
 +++ b/drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
-@@ -0,0 +1,413 @@
+@@ -0,0 +1,445 @@
 +// SPDX-License-Identifier: GPL-2.0-only
 +/* IEI WT61P803 PUZZLE MCU HWMON Driver
 + *
@@ -84,13 +84,17 @@ Cc: Robert Marko <robert.marko@sartura.hr>
 + * @name:		Thermal cooling device name
 + * @pwm_channel:	Controlled PWM channel (0 or 1)
 + * @cooling_levels:	Thermal cooling device cooling levels (DT)
++ * @cur_level:		Current cooling level
++ * @num_levels:	Number of cooling levels
 + */
 +struct iei_wt61p803_puzzle_thermal_cooling_device {
 +	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon;
 +	struct thermal_cooling_device *tcdev;
 +	char name[THERMAL_NAME_LENGTH];
 +	int pwm_channel;
-+	u8 *cooling_levels;
++	u32 *cooling_levels;
++	int cur_level;
++	u8 num_levels;
 +};
 +
 +/**
@@ -326,8 +330,12 @@ Cc: Robert Marko <robert.marko@sartura.hr>
 +static int iei_wt61p803_puzzle_get_max_state(struct thermal_cooling_device *tcdev,
 +					     unsigned long *state)
 +{
-+	*state = IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL;
++	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
 +
++	if (!cdev)
++		return -EINVAL;
++
++	*state = cdev->num_levels - 1;
 +	return 0;
 +}
 +
@@ -335,14 +343,14 @@ Cc: Robert Marko <robert.marko@sartura.hr>
 +					     unsigned long *state)
 +{
 +	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
-+	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = cdev->mcu_hwmon;
-+	long value;
-+	int ret;
 +
-+	ret = iei_wt61p803_puzzle_read_pwm_channel(mcu_hwmon, cdev->pwm_channel, &value);
++	if (!cdev)
-+	if (ret)
++		return -EINVAL;
-+		return ret;
++
-+	*state = value;
++	if (cdev->cur_level < 0)
++		return -EAGAIN;
++
++	*state = cdev->cur_level;
 +	return 0;
 +}
 +
@@ -350,9 +358,21 @@ Cc: Robert Marko <robert.marko@sartura.hr>
 +					     unsigned long state)
 +{
 +	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
-+	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = cdev->mcu_hwmon;
++	u8 pwm_level;
 +
-+	return iei_wt61p803_puzzle_write_pwm_channel(mcu_hwmon, cdev->pwm_channel, state);
++	if (!cdev)
++		return -EINVAL;
++
++	if (state >= cdev->num_levels)
++		return -EINVAL;
++
++	if (state == cdev->cur_level)
++		return 0;
++
++	cdev->cur_level = state;
++	pwm_level = cdev->cooling_levels[state];
++
++	return iei_wt61p803_puzzle_write_pwm_channel(cdev->mcu_hwmon, cdev->pwm_channel, pwm_level);
 +}
 +
 +static const struct thermal_cooling_device_ops iei_wt61p803_puzzle_cooling_ops = {
@@ -369,7 +389,7 @@ Cc: Robert Marko <robert.marko@sartura.hr>
 +	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev;
 +	u32 pwm_channel;
 +	u8 num_levels;
-+	int ret;
++	int i, ret;
 +
 +	ret = fwnode_property_read_u32(child, "reg", &pwm_channel);
 +	if (ret)
@@ -377,7 +397,7 @@ Cc: Robert Marko <robert.marko@sartura.hr>
 +
 +	mcu_hwmon->thermal_cooling_dev_present[pwm_channel] = true;
 +
-+	num_levels = fwnode_property_count_u8(child, "cooling-levels");
++	num_levels = fwnode_property_count_u32(child, "cooling-levels");
 +	if (!num_levels)
 +		return -EINVAL;
 +
@@ -385,11 +405,11 @@ Cc: Robert Marko <robert.marko@sartura.hr>
 +	if (!cdev)
 +		return -ENOMEM;
 +
-+	cdev->cooling_levels = devm_kmalloc_array(dev, num_levels, sizeof(u8), GFP_KERNEL);
++	cdev->cooling_levels = devm_kmalloc_array(dev, num_levels, sizeof(u32), GFP_KERNEL);
 +	if (!cdev->cooling_levels)
 +		return -ENOMEM;
 +
-+	ret = fwnode_property_read_u8_array(child, "cooling-levels",
++	ret = fwnode_property_read_u32_array(child, "cooling-levels",
 +					     cdev->cooling_levels,
 +					     num_levels);
 +	if (ret) {
@@ -397,16 +417,28 @@ Cc: Robert Marko <robert.marko@sartura.hr>
 +		return ret;
 +	}
 +
-+	snprintf(cdev->name, THERMAL_NAME_LENGTH, "wt61p803_puzzle_%d", pwm_channel);
++	for (i = 0; i < num_levels; i++) {
-+	cdev->tcdev = devm_thermal_of_cooling_device_register(dev, NULL, cdev->name, cdev,
++		if (cdev->cooling_levels[i] >
-+							      &iei_wt61p803_puzzle_cooling_ops);
++		    IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL) {
-+	if (IS_ERR(cdev->tcdev))
++			dev_err(dev, "iei_wt61p803_fan state[%d]:%d > %d\n", i,
-+		return PTR_ERR(cdev->tcdev);
++				cdev->cooling_levels[i],
++				IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL);
++			return -EINVAL;
++		}
++	}
 +
 +	cdev->mcu_hwmon = mcu_hwmon;
 +	cdev->pwm_channel = pwm_channel;
++	cdev->num_levels = num_levels;
++	cdev->cur_level = -1;
 +	mcu_hwmon->cdev[pwm_channel] = cdev;
 +
++	snprintf(cdev->name, THERMAL_NAME_LENGTH, "wt61p803_puzzle_%d", pwm_channel);
++	cdev->tcdev = devm_thermal_of_cooling_device_register(dev, to_of_node(child), cdev->name,
++							      cdev, &iei_wt61p803_puzzle_cooling_ops);
++	if (IS_ERR(cdev->tcdev))
++		return PTR_ERR(cdev->tcdev);
++
 +	return 0;
 +}
 +

target/linux/mvebu/patches-5.15/105-power-reset-linkstation-poweroff-add-ls220de.patch

@@ -0,0 +1,15 @@
+--- a/drivers/power/reset/linkstation-poweroff.c
++++ b/drivers/power/reset/linkstation-poweroff.c
+@@ -142,6 +142,12 @@ static void linkstation_poweroff(void)
+ }
+ 
+ static const struct of_device_id ls_poweroff_of_match[] = {
++	{ .compatible = "buffalo,ls220d",
++	  .data = &linkstation_power_off_cfg,
++	},
++	{ .compatible = "buffalo,ls220de",
++	  .data = &linkstation_power_off_cfg,
++	},
+ 	{ .compatible = "buffalo,ls421d",
+ 	  .data = &linkstation_power_off_cfg,
+ 	},

target/linux/mvebu/patches-5.15/903-drivers-hwmon-Add-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch

@@ -53,7 +53,7 @@ Cc: Robert Marko <robert.marko@sartura.hr>
  obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o
 --- /dev/null
 +++ b/drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
-@@ -0,0 +1,413 @@
+@@ -0,0 +1,445 @@
 +// SPDX-License-Identifier: GPL-2.0-only
 +/* IEI WT61P803 PUZZLE MCU HWMON Driver
 + *
@@ -84,13 +84,17 @@ Cc: Robert Marko <robert.marko@sartura.hr>
 + * @name:		Thermal cooling device name
 + * @pwm_channel:	Controlled PWM channel (0 or 1)
 + * @cooling_levels:	Thermal cooling device cooling levels (DT)
++ * @cur_level:		Current cooling level
++ * @num_levels:	Number of cooling levels
 + */
 +struct iei_wt61p803_puzzle_thermal_cooling_device {
 +	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon;
 +	struct thermal_cooling_device *tcdev;
 +	char name[THERMAL_NAME_LENGTH];
 +	int pwm_channel;
-+	u8 *cooling_levels;
++	u32 *cooling_levels;
++	int cur_level;
++	u8 num_levels;
 +};
 +
 +/**
@@ -326,8 +330,12 @@ Cc: Robert Marko <robert.marko@sartura.hr>
 +static int iei_wt61p803_puzzle_get_max_state(struct thermal_cooling_device *tcdev,
 +					     unsigned long *state)
 +{
-+	*state = IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL;
++	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
 +
++	if (!cdev)
++		return -EINVAL;
++
++	*state = cdev->num_levels - 1;
 +	return 0;
 +}
 +
@@ -335,14 +343,14 @@ Cc: Robert Marko <robert.marko@sartura.hr>
 +					     unsigned long *state)
 +{
 +	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
-+	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = cdev->mcu_hwmon;
-+	long value;
-+	int ret;
 +
-+	ret = iei_wt61p803_puzzle_read_pwm_channel(mcu_hwmon, cdev->pwm_channel, &value);
++	if (!cdev)
-+	if (ret)
++		return -EINVAL;
-+		return ret;
++
-+	*state = value;
++	if (cdev->cur_level < 0)
++		return -EAGAIN;
++
++	*state = cdev->cur_level;
 +	return 0;
 +}
 +
@@ -350,9 +358,21 @@ Cc: Robert Marko <robert.marko@sartura.hr>
 +					     unsigned long state)
 +{
 +	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
-+	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = cdev->mcu_hwmon;
++	u8 pwm_level;
 +
-+	return iei_wt61p803_puzzle_write_pwm_channel(mcu_hwmon, cdev->pwm_channel, state);
++	if (!cdev)
++		return -EINVAL;
++
++	if (state >= cdev->num_levels)
++		return -EINVAL;
++
++	if (state == cdev->cur_level)
++		return 0;
++
++	cdev->cur_level = state;
++	pwm_level = cdev->cooling_levels[state];
++
++	return iei_wt61p803_puzzle_write_pwm_channel(cdev->mcu_hwmon, cdev->pwm_channel, pwm_level);
 +}
 +
 +static const struct thermal_cooling_device_ops iei_wt61p803_puzzle_cooling_ops = {
@@ -369,7 +389,7 @@ Cc: Robert Marko <robert.marko@sartura.hr>
 +	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev;
 +	u32 pwm_channel;
 +	u8 num_levels;
-+	int ret;
++	int i, ret;
 +
 +	ret = fwnode_property_read_u32(child, "reg", &pwm_channel);
 +	if (ret)
@@ -377,7 +397,7 @@ Cc: Robert Marko <robert.marko@sartura.hr>
 +
 +	mcu_hwmon->thermal_cooling_dev_present[pwm_channel] = true;
 +
-+	num_levels = fwnode_property_count_u8(child, "cooling-levels");
++	num_levels = fwnode_property_count_u32(child, "cooling-levels");
 +	if (!num_levels)
 +		return -EINVAL;
 +
@@ -385,11 +405,11 @@ Cc: Robert Marko <robert.marko@sartura.hr>
 +	if (!cdev)
 +		return -ENOMEM;
 +
-+	cdev->cooling_levels = devm_kmalloc_array(dev, num_levels, sizeof(u8), GFP_KERNEL);
++	cdev->cooling_levels = devm_kmalloc_array(dev, num_levels, sizeof(u32), GFP_KERNEL);
 +	if (!cdev->cooling_levels)
 +		return -ENOMEM;
 +
-+	ret = fwnode_property_read_u8_array(child, "cooling-levels",
++	ret = fwnode_property_read_u32_array(child, "cooling-levels",
 +					     cdev->cooling_levels,
 +					     num_levels);
 +	if (ret) {
@@ -397,16 +417,28 @@ Cc: Robert Marko <robert.marko@sartura.hr>
 +		return ret;
 +	}
 +
-+	snprintf(cdev->name, THERMAL_NAME_LENGTH, "wt61p803_puzzle_%d", pwm_channel);
++	for (i = 0; i < num_levels; i++) {
-+	cdev->tcdev = devm_thermal_of_cooling_device_register(dev, NULL, cdev->name, cdev,
++		if (cdev->cooling_levels[i] >
-+							      &iei_wt61p803_puzzle_cooling_ops);
++		    IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL) {
-+	if (IS_ERR(cdev->tcdev))
++			dev_err(dev, "iei_wt61p803_fan state[%d]:%d > %d\n", i,
-+		return PTR_ERR(cdev->tcdev);
++				cdev->cooling_levels[i],
++				IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL);
++			return -EINVAL;
++		}
++	}
 +
 +	cdev->mcu_hwmon = mcu_hwmon;
 +	cdev->pwm_channel = pwm_channel;
++	cdev->num_levels = num_levels;
++	cdev->cur_level = -1;
 +	mcu_hwmon->cdev[pwm_channel] = cdev;
 +
++	snprintf(cdev->name, THERMAL_NAME_LENGTH, "wt61p803_puzzle_%d", pwm_channel);
++	cdev->tcdev = devm_thermal_of_cooling_device_register(dev, to_of_node(child), cdev->name,
++							      cdev, &iei_wt61p803_puzzle_cooling_ops);
++	if (IS_ERR(cdev->tcdev))
++		return PTR_ERR(cdev->tcdev);
++
 +	return 0;
 +}
 +

target/linux/octeontx/Makefile

@@ -10,8 +10,7 @@ BOARDNAME:=Octeon-TX
 FEATURES:=squashfs ramdisk targz pcie gpio rtc usb fpu
 SUBTARGETS:=generic
 
-KERNEL_PATCHVER:=5.10
+KERNEL_PATCHVER:=5.15
-KERNEL_TESTING_PATCHVER:=5.15
 
 define Target/Description
 	Build images for Octeon-TX CN80XX/CN81XX based boards
@@ -21,4 +20,9 @@ include $(INCLUDE_DIR)/target.mk
 
 KERNELNAME:=Image
 
+DEFAULT_PACKAGES += uboot-envtools mkf2fs e2fsprogs blkid \
+		    kmod-hwmon-gsc kmod-leds-gpio kmod-pps-gpio \
+		    kmod-gpio-button-hotplug kmod-input-evdev kmod-rtc-ds1672 \
+		    kmod-can kmod-can-mcp251x
+
 $(eval $(call BuildTarget))

target/linux/octeontx/config-5.10

@@ -1,413 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HIBERNATION_HEADER=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=33
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_THUNDER=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CNP=y
-CONFIG_ARM64_CRYPTO=y
-CONFIG_ARM64_ERRATUM_819472=y
-CONFIG_ARM64_ERRATUM_824069=y
-CONFIG_ARM64_ERRATUM_826319=y
-CONFIG_ARM64_ERRATUM_827319=y
-CONFIG_ARM64_ERRATUM_843419=y
-CONFIG_ARM64_HW_AFDBM=y
-CONFIG_ARM64_MODULE_PLTS=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PAN=y
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_PTR_AUTH=y
-CONFIG_ARM64_SVE=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_UAO=y
-CONFIG_ARM64_VA_BITS=48
-# CONFIG_ARM64_VA_BITS_39 is not set
-CONFIG_ARM64_VA_BITS_48=y
-CONFIG_ARM64_VHE=y
-CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-CONFIG_ARM_PSCI_FW=y
-CONFIG_ARM_SBSA_WATCHDOG=y
-CONFIG_ATA=y
-# CONFIG_ATA_SFF is not set
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_BALLOON_COMPACTION=y
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLK_DEV_BSGLIB=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_MQ_VIRTIO=y
-CONFIG_BLK_PM=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_CAVIUM_ERRATUM_22375=y
-CONFIG_CAVIUM_ERRATUM_23144=y
-CONFIG_CAVIUM_ERRATUM_23154=y
-CONFIG_CAVIUM_ERRATUM_27456=y
-CONFIG_CAVIUM_ERRATUM_30115=y
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_CS2000_CP=y
-# CONFIG_COMPAT_32BIT_TIME is not set
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONTIG_ALLOC=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRASH_DUMP=y
-CONFIG_CRC16=y
-CONFIG_CRC7=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRYPTO_AES_ARM64=y
-CONFIG_CRYPTO_AES_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRCT10DIF=y
-CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECHAINIV=y
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA1_ARM64_CE=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA256_ARM64=y
-CONFIG_CRYPTO_SHA2_ARM64_CE=y
-CONFIG_CRYPTO_SIMD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_PERNUMA_CMA=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DTC=y
-CONFIG_DT_IDLE_STATES=y
-CONFIG_EDAC=y
-# CONFIG_EDAC_DEBUG is not set
-# CONFIG_EDAC_DMC520 is not set
-CONFIG_EDAC_LEGACY_SYSFS=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EDAC_THUNDERX=y
-# CONFIG_EDAC_XGENE is not set
-CONFIG_EEPROM_AT24=y
-CONFIG_FAT_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FREEZER=y
-CONFIG_FW_CACHE=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GPIO_THUNDERX=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HIBERNATE_CALLBACKS=y
-CONFIG_HIBERNATION=y
-CONFIG_HIBERNATION_SNAPSHOT_DEV=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_HWSPINLOCK=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_CAVIUM=y
-CONFIG_HW_RANDOM_OPTEE=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_SMBUS=y
-CONFIG_I2C_THUNDERX=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_TIME_ACCOUNTING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISDN is not set
-CONFIG_JUMP_LABEL=y
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-CONFIG_KSM=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MAILBOX=y
-# CONFIG_MAILBOX_TEST is not set
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_CAVIUM=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MDIO_THUNDER=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY_BALLOON=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MEMTEST=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_CAVIUM_THUNDERX=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MSDOS_FS=y
-# CONFIG_MTD is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NODES_SHIFT=2
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=64
-CONFIG_NUMA=y
-CONFIG_NUMA_BALANCING=y
-CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
-CONFIG_NVMEM=y
-CONFIG_NVMEM_SYSFS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_NUMA=y
-CONFIG_OPTEE=y
-CONFIG_OPTEE_SHM_NUM_PRIV_PAGES=1
-CONFIG_PADATA=y
-CONFIG_PAGE_REPORTING=y
-CONFIG_PARAVIRT=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_ATS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_ECAM=y
-CONFIG_PCI_HOST_COMMON=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCI_HOST_THUNDER_ECAM=y
-CONFIG_PCI_HOST_THUNDER_PEM=y
-CONFIG_PCI_IOV=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PGTABLE_LEVELS=4
-CONFIG_PHYLIB=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PM_STD_PARTITION=""
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_POWER_RESET_XGENE=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PROC_VMCORE=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-# CONFIG_RAVE_SP_CORE is not set
-CONFIG_REBOOT_MODE=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1672=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SATA_HOST=y
-CONFIG_SCHED_INFO=y
-CONFIG_SCHED_MC=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SCSI_SAS_ATA=y
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_HOST_SMP=y
-CONFIG_SCSI_SAS_LIBSAS=y
-CONFIG_SECCOMP=y
-CONFIG_SECCOMP_FILTER=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_DEV_BUS=y
-CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_XILINX_PS_UART=y
-CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_THUNDERX=y
-CONFIG_SRAM=y
-CONFIG_SRCU=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSCON_REBOOT_MODE=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_TASK_XACCT=y
-CONFIG_TEE=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_THUNDER_NIC_BGX=y
-CONFIG_THUNDER_NIC_PF=y
-CONFIG_THUNDER_NIC_RGX=y
-CONFIG_THUNDER_NIC_VF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
-# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_PCI=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PCI=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_USE_PERCPU_NUMA_NODE_ID=y
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_BALLOON=y
-# CONFIG_VIRTIO_BLK is not set
-CONFIG_VIRTIO_MMIO=y
-# CONFIG_VIRTIO_NET is not set
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_PCI_LEGACY=y
-CONFIG_VMAP_STACK=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XARRAY_MULTI=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_ZONE_DMA32=y

target/linux/octeontx/config-5.15

@@ -145,6 +145,8 @@ CONFIG_EDAC_SUPPORT=y
 CONFIG_EDAC_THUNDERX=y
 # CONFIG_EDAC_XGENE is not set
 CONFIG_EEPROM_AT24=y
+CONFIG_EXT4_FS=y
+CONFIG_F2FS_FS=y
 CONFIG_FAT_FS=y
 CONFIG_FIXED_PHY=y
 CONFIG_FIX_EARLYCON_MEM=y

target/linux/octeontx/patches-5.10/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch

@@ -1,59 +0,0 @@
-From d0ff7a1bcfe886cab1a237895b08ac51ecfe10e7 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Wed, 10 Apr 2019 08:00:47 -0700
-Subject: [PATCH 04/12] PCI: add quirk for Gateworks PLX PEX860x switch with
- GPIO PERST#
-
-Gateworks boards use PLX PEX860x switches where downstream ports
-have their PERST# driven from the PEX GPIO.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/pci/quirks.c | 32 ++++++++++++++++++++++++++++++++
- 1 file changed, 32 insertions(+)
-
---- a/drivers/pci/quirks.c
-+++ b/drivers/pci/quirks.c
-@@ -25,6 +25,7 @@
- #include <linux/ktime.h>
- #include <linux/mm.h>
- #include <linux/nvme.h>
-+#include <linux/of.h>
- #include <linux/platform_data/x86/apple.h>
- #include <linux/pm_runtime.h>
- #include <linux/suspend.h>
-@@ -5787,3 +5788,34 @@ static void nvidia_ion_ahci_fixup(struct
- 	pdev->dev_flags |= PCI_DEV_FLAGS_HAS_MSI_MASKING;
- }
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0ab8, nvidia_ion_ahci_fixup);
-+
-+#ifdef CONFIG_PCI_HOST_THUNDER_PEM
-+/*
-+ * fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High
-+ * as they are used for slots1-7 PERST#
-+ */
-+static void newport_pciesw_early_fixup(struct pci_dev *dev)
-+{
-+	u32 dw;
-+
-+	if (!of_machine_is_compatible("gw,newport"))
-+		return;
-+
-+	if (dev->devfn != 0)
-+		return;
-+
-+	dev_info(&dev->dev, "de-asserting PERST#\n");
-+	pci_read_config_dword(dev, 0x62c, &dw);
-+	dw |= 0xaaa8; /* GPIO1-7 outputs */
-+	pci_write_config_dword(dev, 0x62c, dw);
-+
-+	pci_read_config_dword(dev, 0x644, &dw);
-+	dw |= 0xfe;   /* GPIO1-7 output high */
-+	pci_write_config_dword(dev, 0x644, dw);
-+
-+	msleep(100);
-+}
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, newport_pciesw_early_fixup);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, newport_pciesw_early_fixup);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, newport_pciesw_early_fixup);
-+#endif /* CONFIG_PCI_HOST_THUNDER_PEM */

target/linux/qoriq/files/arch/powerpc/boot/dts/fsl/watchguard-firebox-m300.dts

@@ -269,7 +269,6 @@
 				status = "disabled";
 
 				reg = "<5>";
-				label = "cpu";
 				ethernet = <&enet2>;
 				phy-mode = "rgmii-id";
 
@@ -281,7 +280,6 @@
 
 			port@6 {
 				reg = <6>;
-				label = "cpu";
 				ethernet = <&enet3>;
 				phy-mode = "rgmii-id";
 

target/linux/ramips/dts/mt7621.dtsi

@@ -558,7 +558,6 @@
 
 					port@6 {
 						reg = <6>;
-						label = "cpu";
 						ethernet = <&gmac0>;
 						phy-mode = "rgmii";
 

target/linux/ramips/dts/mt7621_netgear_sercomm_ayx.dtsi

@@ -96,7 +96,7 @@
 	};
 };
 
-&pcie1 {
+&pcie2 {
 	wifi@0,0 {
 		compatible = "mediatek,mt76";
 		reg = <0x0 0 0 0 0>;

target/linux/ramips/dts/mt7621_netgear_wac104.dts

@@ -122,7 +122,7 @@
 	};
 };
 
-&pcie1 {
+&pcie2 {
 	wifi@0,0 {
 		compatible = "mediatek,mt76";
 		reg = <0x0 0 0 0 0>;

target/linux/ramips/image/mt76x8.mk

@@ -55,6 +55,8 @@ define Device/asus_rt-ac1200-v2
   DEVICE_VENDOR := ASUS
   DEVICE_MODEL := RT-AC1200
   DEVICE_VARIANT := V2
+  DEVICE_ALT0_VENDOR := ASUS
+  DEVICE_ALT0_MODEL := RT-AC750L
   IMAGES += factory.bin
   IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
 	append-rootfs | pad-rootfs

target/linux/sunxi/config-5.15

@@ -307,6 +307,7 @@ CONFIG_NO_HZ_IDLE=y
 CONFIG_NR_CPUS=8
 CONFIG_NVMEM=y
 CONFIG_NVMEM_SUNXI_SID=y
+CONFIG_NVMEM_SYSFS=y
 CONFIG_OF=y
 CONFIG_OF_ADDRESS=y
 CONFIG_OF_EARLY_FLATTREE=y