Difuse/difos
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Merge branch 'openwrt:master' into master

Browse source
This commit is contained in:
Hayzam Sherif 2023-03-09 11:52:34 +05:30 committed by GitHub
commit e2a735b05c
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
11 changed files with 840 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
package/boot/uboot-envtools/files/ramips
View file

@ -85,6 +85,7 @@ linksys,ea8100-v2|\
mts,wg430223)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000"
;;
snr,snr-cpe-me2-sfp|\
snr,cpe-w4n-mt)
idx="$(find_mtd_index uboot-env)"
[ -n "$idx" ] && \

16
package/kernel/linux/modules/netdevices.mk
View file

@ -1523,3 +1523,19 @@ endef
$(eval $(call KernelPackage,atlantic))
define KernelPackage/lan743x
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=Microchip LAN743x PCI Express Gigabit Ethernet NIC
DEPENDS:=@PCI_SUPPORT
KCONFIG:=CONFIG_LAN743X
FILES:=$(LINUX_DIR)/drivers/net/ethernet/microchip/lan743x.ko
AUTOLOAD:=$(call AutoProbe,lan743x)
endef
define KernelPackage/lan743x/description
Kernel module for Microchip LAN743x PCI Express Gigabit Ethernet NIC
endef
$(eval $(call KernelPackage,lan743x))

9
target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds
View file

@ -15,6 +15,15 @@ ctera,c200-v2)
ucidef_set_led_usbport "usb2" "USB2" "green:usb-2" "usb1-port1" "usb2-port1"
ucidef_set_led_usbport "usb3" "USB3" "green:usb-1" "usb1-port2" "usb2-port2"
;;
fortinet,fg-50e)
ucidef_set_led_netdev "wan1_link" "WAN1 Link" "green:speed_wan1" "eth1" "link"
ucidef_set_led_netdev "wan2_link" "WAN2 Link" "green:speed_wan2" "eth2" "link"
ucidef_set_led_netdev "lan1_link" "LAN1 Link" "green:speed_lan1" "lan1" "link"
ucidef_set_led_netdev "lan2_link" "LAN2 Link" "green:speed_lan2" "lan2" "link"
ucidef_set_led_netdev "lan3_link" "LAN3 Link" "green:speed_lan3" "lan3" "link"
ucidef_set_led_netdev "lan4_link" "LAN4 Link" "green:speed_lan4" "lan4" "link"
ucidef_set_led_netdev "lan5_link" "LAN5 Link" "green:speed_lan5" "lan5" "link"
;;
kobol,helios4)
ucidef_set_led_usbport "USB" "USB" "helios4:green:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1" "usb5-port1"
;;

3
target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network
View file

@ -18,6 +18,9 @@ mvebu_setup_interfaces()
cznic,turris-omnia)
ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3 lan4" "eth2"
;;
fortinet,fg-50e)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" "eth1 eth2"
;;
iptime,nas1dual)
ucidef_set_interface_lan "eth0 eth1" "dhcp"
;;

54
target/linux/mvebu/cortexa9/base-files/lib/upgrade/fortinet.sh Normal file
View file

@ -0,0 +1,54 @@
. /lib/functions.sh
fortinet_fwinfo_blocks() {
local fwinfo_mtd="$(find_mtd_part firmware-info)"
local offset="$1"
local len="$2"
local blks
if [ -z "$fwinfo_mtd" ]; then
echo "WARN: MTD device \"firmware-info\" not found"
return 1
fi
blks=$((len / 0x200))
[ $((len % 0x200)) -gt 0 ] && blks=$((blks + 1))
blks=$(printf "%04x" $blks)
printf "fwinfo: offset-> 0x%x, blocks-> 0x%s (len: 0x%08x)\n" \
$offset $blks $len
printf "\x${blks:2:2}\x${blks:0:2}" | \
dd bs=2 count=1 seek=$((offset / 2)) conv=notrunc of=${fwinfo_mtd}
}
fortinet_do_upgrade() {
local board_dir="$(tar tf "$1" | grep -m 1 '^sysupgrade-.*/$')"
local kern_mtd="$(find_mtd_part kernel)"
local root_mtd="$(find_mtd_part rootfs)"
local kern_len root_len
board_dir="${board_dir%/}"
if [ -z "$kern_mtd" ] || [ -z "$root_mtd" ]; then
echo "ERROR: MTD device \"kernel\" or \"rootfs\" not found"
umount -a
reboot -f
fi
kern_len=$( (tar xOf "$1" "$board_dir/kernel" | wc -c) 2> /dev/null)
root_len=$( (tar xOf "$1" "$board_dir/root" | wc -c) 2> /dev/null)
if [ -z "$kern_len" ] || [ -z "$root_len" ]; then
echo "ERROR: failed to get length of new kernel or rootfs"
umount -a
reboot -f
fi
fortinet_fwinfo_blocks "0x184" "$kern_len"
fortinet_fwinfo_blocks "0x18c" "$root_len"
tar xOf "$1" "$board_dir/kernel" | \
mtd write - "kernel"
tar xOf "$1" "$board_dir/root" | \
mtd ${UPGRADE_BACKUP:+-j "${UPGRADE_BACKUP}"} write - "rootfs"
}

3
target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh
View file

@ -52,6 +52,9 @@ platform_do_upgrade() {
solidrun,clearfog-pro-a1)
legacy_sdcard_do_upgrade "$1"
;;
fortinet,fg-50e)
fortinet_do_upgrade "$1"
;;
linksys,wrt1200ac|\
linksys,wrt1900ac-v1|\
linksys,wrt1900ac-v2|\

491
target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts Normal file
View file

@ -0,0 +1,491 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include "armada-385.dtsi"
/ {
model = "Fortinet FortiGate 50E";
compatible = "fortinet,fg-50e", "marvell,armada385", "marvell,armada380";
aliases {
led-boot = &led_status_green;
led-failsafe = &led_status_red;
led-running = &led_status_green;
led-upgrade = &led_status_green;
label-mac-device = &eth0;
};
chosen {
stdout-path = "serial0:9600n8";
};
memory@0 {
device_type = "memory";
reg = <0x00000000 0x80000000>; /* 2GB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pmx_gpio_keys_pins>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pmx_gpio_leds_pins>;
led-0 {
label = "red:alarm";
gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_ALARM;
};
led-1 {
label = "red:ha";
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_RED>;
};
led_status_green: led-2 {
label = "green:sta";
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
};
led-3 {
label = "green:ha";
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_GREEN>;
};
led-4 {
label = "amber:alarm";
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_ALARM;
};
led_status_red: led-5 {
label = "red:sta";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_STATUS;
};
led-6 {
label = "green:speed_wan1";
gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_GREEN>;
};
led-7 {
label = "green:speed_wan2";
gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_GREEN>;
};
led-8 {
label = "amber:speed_lan5";
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_AMBER>;
};
led-9 {
label = "green:speed_lan5";
gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_GREEN>;
};
led-10 {
label = "green:speed_lan4";
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_GREEN>;
};
led-11 {
label = "amber:speed_lan4";
gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_AMBER>;
};
led-12 {
label = "amber:speed_lan3";
gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_AMBER>;
};
led-13 {
label = "green:speed_lan3";
gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_GREEN>;
};
led-14 {
label = "green:speed_lan1";
gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_GREEN>;
};
led-15 {
label = "amber:speed_lan1";
gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_AMBER>;
};
led-16 {
label = "green:speed_lan2";
gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_GREEN>;
};
led-17 {
label = "amber:speed_lan2";
gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_AMBER>;
};
};
reg_usb_vbus: regulator-usb-vbus {
compatible = "fixed-regulator";
regulator-name = "usb-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 21 GPIO_ACTIVE_LOW>;
regulator-always-on;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay";
gpio2: gpio@24 {
compatible = "nxp,pca9555";
reg = <0x24>;
gpio-controller;
#gpio-cells = <0x2>;
};
hwmon@28 {
compatible = "nuvoton,nct7802";
reg = <0x28>;
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
&pinctrl {
pmx_phy_switch_pins: phy-switch-pins {
marvell,pins = "mpp19", "mpp20", "mpp23", "mpp34", "mpp41";
marvell,function = "gpio";
};
pmx_gpio_leds_pins: gpio-leds-pins {
marvell,pins = "mpp30", "mpp32", "mpp33", "mpp35",
"mpp45", "mpp47";
marvell,function = "gpio";
};
pmx_usb_pins: usb-pins {
marvell,pins = "mpp53";
marvell,function = "gpio";
};
pmx_gpio_keys_pins: gpio-keys-pins {
marvell,pins = "mpp54";
marvell,function = "gpio";
};
};
&bm {
status = "okay";
};
&bm_bppi {
status = "okay";
};
&eth0 {
pinctrl-names = "default";
pinctrl-0 = <&ge0_rgmii_pins>;
status = "okay";
phy-connection-type = "rgmii-id";
buffer-manager = <&bm>;
bm,pool-long = <0>;
bm,pool-short = <1>;
nvmem-cells = <&macaddr_bdinfo_d880>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&eth1 {
status = "okay";
phy-handle = <&ethphy0>;
phy-connection-type = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <2>;
nvmem-cells = <&macaddr_bdinfo_d880>;
nvmem-cell-names = "mac-address";
mac-address-increment = <1>;
};
&eth2 {
status = "okay";
phy-handle = <&ethphy1>;
phy-connection-type = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <3>;
nvmem-cells = <&macaddr_bdinfo_d880>;
nvmem-cell-names = "mac-address";
mac-address-increment = <2>;
};
&mdio {
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>, <&pmx_phy_switch_pins>;
/* Marvell 88E1512 */
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-id0141,0dd1",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
interrupt-parent = <&gpio0>;
interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
/*
* LINK/ACT (Green): LED[0], Active Low
* SPEED 100M (Amber): LED[1], Active High
*/
marvell,reg-init = <3 16 0 0x71>,
<3 17 0 0x4>;
};
/* Marvell 88E1512 */
ethphy1: ethernet-phy@1 {
compatible = "ethernet-phy-id0141,0dd1",
"ethernet-phy-ieee802.3-c22";
reg = <1>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
/*
* LINK/ACT (Green): LED[0], Active Low
* SPEED 100M (Amber): LED[1], Active High
*/
marvell,reg-init = <3 16 0 0x71>,
<3 17 0 0x4>;
};
/* Marvell 88E6176 */
switch@2 {
compatible = "marvell,mv88e6085";
reg = <0x2>;
reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan5";
nvmem-cells = <&macaddr_bdinfo_d880>;
nvmem-cell-names = "mac-address";
mac-address-increment = <7>;
};
port@1 {
reg = <1>;
label = "lan4";
nvmem-cells = <&macaddr_bdinfo_d880>;
nvmem-cell-names = "mac-address";
mac-address-increment = <6>;
};
port@2 {
reg = <2>;
label = "lan3";
nvmem-cells = <&macaddr_bdinfo_d880>;
nvmem-cell-names = "mac-address";
mac-address-increment = <5>;
};
port@3 {
reg = <3>;
label = "lan2";
nvmem-cells = <&macaddr_bdinfo_d880>;
nvmem-cell-names = "mac-address";
mac-address-increment = <4>;
};
port@4 {
reg = <4>;
label = "lan1";
nvmem-cells = <&macaddr_bdinfo_d880>;
nvmem-cell-names = "mac-address";
mac-address-increment = <3>;
};
port@6 {
reg = <6>;
ethernet = <&eth0>;
phy-connection-type = "rgmii-id";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
};
&usb3_0 {
pinctrl-names = "default";
pinctrl-0 = <&pmx_usb_pins>;
status = "okay";
vbus-supply = <&reg_usb_vbus>;
};
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x1c0000>;
label = "u-boot";
read-only;
};
partition@1c0000 {
reg = <0x1c0000 0x10000>;
label = "firmware-info";
/*
* 0x10 - 0x2f : image name (image1)
* 0x30 - 0x4f : image name (image2)
* 0x170 (1byte): active image (0x0/0x1)
* 0x184 - 0x185: kernel block count (image1)
* 0x18c - 0x18d: rootfs block count (image1)
* 0x194 - 0x195: kernel block count (image2)
* 0x19c - 0x19d: rootfs block count (image2)
* 0x1be (1byte): bit7 -> active flag (image1)?
* 0x1ce (1byte): bit7 -> active flag (image2)?
*
* Note: block size --> 0x200 (512 bytes)
*/
};
partition@1d0000 {
reg = <0x1d0000 0x10000>;
label = "dtb";
read-only;
};
partition@1e0000 {
reg = <0x1e0000 0x10000>;
label = "u-boot-env";
read-only;
};
partition@1f0000 {
reg = <0x1f0000 0x10000>;
label = "board-info";
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_bdinfo_d880: macaddr@d880 {
reg = <0xd880 0x6>;
};
};
partition@200000 {
reg = <0x200000 0x600000>;
label = "kernel";
};
partition@800000 {
reg = <0x800000 0x1800000>;
label = "rootfs";
};
partition@2000000 {
reg = <0x2000000 0x600000>;
label = "kn2";
read-only;
};
partition@2600000 {
reg = <0x2600000 0x1800000>;
label = "rfs2";
read-only;
};
partition@3e00000 {
reg = <0x3e00000 0x1200000>;
label = "part1";
read-only;
};
partition@5000000 {
reg = <0x5000000 0x1200000>;
label = "part2";
read-only;
};
partition@6200000 {
reg = <0x6200000 0x1e00000>;
label = "config";
read-only;
};
};
};
};

28
target/linux/mvebu/image/cortexa9.mk
View file

@ -3,6 +3,19 @@
# Copyright (C) 2012-2016 OpenWrt.org
# Copyright (C) 2016 LEDE-project.org
define Build/fortigate-header
( \
dd if=/dev/zero bs=384 count=1 2>/dev/null; \
datalen=$$(wc -c $@ | cut -d' ' -f1); \
datalen=$$(printf "%08x" $$datalen); \
datalen="$${datalen:6:2}$${datalen:4:2}$${datalen:2:2}$${datalen:0:2}"; \
printf $$(echo "00020000$${datalen}ffff0000ffff0000" | sed 's/../\\x&/g'); \
dd if=/dev/zero bs=112 count=1 2>/dev/null; \
cat $@; \
) > $@.new
mv $@.new $@
endef
define Device/dsa-migration
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
@ -84,6 +97,21 @@ define Device/cznic_turris-omnia
endef
TARGET_DEVICES += cznic_turris-omnia
define Device/fortinet_fg-50e
DEVICE_VENDOR := Fortinet
DEVICE_MODEL := FortiGate 50E
SOC := armada-385
KERNEL := kernel-bin | append-dtb
KERNEL_INITRAMFS := kernel-bin | append-dtb | fortigate-header | \
gzip-filename FGT50E
KERNEL_SIZE := 6144k
DEVICE_DTS := armada-385-fortinet-fg-50e
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | \
sysupgrade-tar rootfs=$$$$@ | append-metadata
DEVICE_PACKAGES := kmod-hwmon-nct7802
endef
TARGET_DEVICES += fortinet_fg-50e
define Device/globalscale_mirabox
$(Device/NAND-512K)
DEVICE_VENDOR := Globalscale

219
target/linux/ramips/dts/mt7621_snr_snr-cpe-me2-sfp.dts Normal file
View file

@ -0,0 +1,219 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "snr,snr-cpe-me2-sfp", "mediatek,mt7621-soc";
model = "SNR-CPE-ME2-SFP";
aliases {
led-boot = &led_sys;
led-failsafe = &led_sys;
led-running = &led_sys;
led-upgrade = &led_sys;
};
leds {
compatible = "gpio-leds";
led_sys: sys {
label = "green:sys";
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
vpn {
label = "green:vpn";
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
usb {
label = "green:usb";
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_USB;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
trigger-sources = <&xhci_ehci_port1>;
linux,default-trigger = "usbport";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
sfp_wan: sfp0 {
compatible = "sff,sfp";
i2c-bus = <&i2c>;
los-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <1000>;
};
reg_usb_vbus: regulator-usb {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
&state_default {
gpio {
groups = "uart2", "uart3", "jtag";
function = "gpio";
};
};
&spi0 {
status = "okay";
flash@0 { // GD25Q127CSIG
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <44000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "config";
reg = <0x30000 0x10000>;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xfb0000>;
};
partition@30001 {
label = "uboot-env";
reg = <0x30000 0x1000>;
};
};
};
};
&gpio {
// driver issue, bypass
enable_sfp {
gpio-hog;
gpios = <9 GPIO_ACTIVE_LOW>;
output-low;
};
};
&mdio {
phy_sfp: ethernet-phy@0 {
reg = <0>;
sfp = <&sfp_wan>;
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_e000>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
status = "okay";
label = "wan";
phy-mode = "rgmii-rxid";
phy-handle = <&phy_sfp>;
nvmem-cells = <&macaddr_factory_e006>;
nvmem-cell-names = "mac-address";
};
&switch0 {
ports {
port@1 {
status = "okay";
label = "lan1";
};
port@2 {
status = "okay";
label = "lan2";
};
port@3 {
status = "okay";
label = "lan3";
};
port@4 {
status = "okay";
label = "lan4";
};
};
};
&xhci {
vusb33-supply = <&reg_3p3v>;
vbus-supply = <&reg_usb_vbus>;
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0000>;
};
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_e000: macaddr@e000 {
reg = <0xe000 0x6>;
};
macaddr_factory_e006: macaddr@e006 {
reg = <0xe006 0x6>;
};
};

12
target/linux/ramips/image/mt7621.mk
View file

@ -1963,6 +1963,18 @@ define Device/snr_snr-cpe-me2-lite
endef
TARGET_DEVICES += snr_snr-cpe-me2-lite
define Device/snr_snr-cpe-me2-sfp
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := SNR
DEVICE_MODEL := SNR-CPE-ME2-SFP
UIMAGE_NAME := $$(DEVICE_MODEL)
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 \
kmod-sfp kmod-usb-ledtrig-usbport uboot-envtools
endef
TARGET_DEVICES += snr_snr-cpe-me2-sfp
define Device/storylink_sap-g3200u3
$(Device/dsa-migration)
IMAGE_SIZE := 7872k

4
target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
View file

@ -139,6 +139,10 @@ case "$board" in
macaddr_setbit_la "$(mtd_get_mac_ascii Config protest_lan_mac)" \
> /sys${DEVPATH}/macaddress
;;
snr,snr-cpe-me2-sfp)
hw_mac_addr="$(mtd_get_mac_binary factory 0x8004)"
[ "$PHYNBR" = "1" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
;;
tenbay,t-mb5eu-v01)
hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr "0x100000" > /sys${DEVPATH}/macaddress