generic: 6.6: backports and add LED support for Aquantia PHYs

Backport patch adding support for the AQR114C PHY and add support for
PHY LEDs and polarity setting of Aquantia 3rd and 4th generation PHYs.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This commit is contained in:
Daniel Golle 2024-05-11 00:48:57 +01:00
parent febcfadc80
commit cccf98c7e8
4 changed files with 480 additions and 12 deletions

View file

@ -15,9 +15,9 @@ Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
--- a/drivers/net/phy/aquantia/aquantia_main.c --- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c +++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -102,6 +102,29 @@ @@ -127,6 +127,29 @@ struct aqr107_priv {
#define AQR107_OP_IN_PROG_SLEEP 1000 u64 sgmii_stats[AQR107_SGMII_STAT_SZ];
#define AQR107_OP_IN_PROG_TIMEOUT 100000 };
+/* registers in MDIO_MMD_VEND1 region */ +/* registers in MDIO_MMD_VEND1 region */
+#define AQUANTIA_VND1_GLOBAL_SC 0x000 +#define AQUANTIA_VND1_GLOBAL_SC 0x000
@ -42,9 +42,9 @@ Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
+#define AQUANTIA_VND1_GSYSCFG_5G 3 +#define AQUANTIA_VND1_GSYSCFG_5G 3
+#define AQUANTIA_VND1_GSYSCFG_10G 4 +#define AQUANTIA_VND1_GSYSCFG_10G 4
+ +
struct aqr107_hw_stat { static int aqr107_get_sset_count(struct phy_device *phydev)
const char *name; {
int reg; return AQR107_SGMII_STAT_SZ;
@@ -233,6 +256,51 @@ static int aqr_config_aneg(struct phy_de @@ -233,6 +256,51 @@ static int aqr_config_aneg(struct phy_de
return genphy_c45_check_and_restart_aneg(phydev, changed); return genphy_c45_check_and_restart_aneg(phydev, changed);
} }
@ -97,7 +97,7 @@ Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
static int aqr_config_intr(struct phy_device *phydev) static int aqr_config_intr(struct phy_device *phydev)
{ {
bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED; bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED;
@@ -810,7 +878,7 @@ static struct phy_driver aqr_driver[] = @@ -838,7 +906,7 @@ static struct phy_driver aqr_driver[] =
PHY_ID_MATCH_MODEL(PHY_ID_AQR112), PHY_ID_MATCH_MODEL(PHY_ID_AQR112),
.name = "Aquantia AQR112", .name = "Aquantia AQR112",
.probe = aqr107_probe, .probe = aqr107_probe,
@ -106,7 +106,7 @@ Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
.config_intr = aqr_config_intr, .config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt, .handle_interrupt = aqr_handle_interrupt,
.get_tunable = aqr107_get_tunable, .get_tunable = aqr107_get_tunable,
@@ -828,7 +896,7 @@ static struct phy_driver aqr_driver[] = @@ -863,7 +931,7 @@ static struct phy_driver aqr_driver[] =
PHY_ID_MATCH_MODEL(PHY_ID_AQR412), PHY_ID_MATCH_MODEL(PHY_ID_AQR412),
.name = "Aquantia AQR412", .name = "Aquantia AQR412",
.probe = aqr107_probe, .probe = aqr107_probe,

View file

@ -21,9 +21,9 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
#define MDIO_PHYXS_VEND_IF_STATUS 0xe812 #define MDIO_PHYXS_VEND_IF_STATUS 0xe812
#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK GENMASK(7, 3) #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK GENMASK(7, 3)
@@ -992,6 +994,30 @@ static struct phy_driver aqr_driver[] = @@ -1062,6 +1064,30 @@ static struct phy_driver aqr_driver[] =
.get_stats = aqr107_get_stats, .led_polarity_set = aqr_phy_led_polarity_set,
.link_change_notify = aqr107_link_change_notify, #endif
}, },
+{ +{
+ PHY_ID_MATCH_MODEL(PHY_ID_AQR112C), + PHY_ID_MATCH_MODEL(PHY_ID_AQR112C),
@ -52,7 +52,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
}; };
module_phy_driver(aqr_driver); module_phy_driver(aqr_driver);
@@ -1012,6 +1038,8 @@ static struct mdio_device_id __maybe_unu @@ -1082,6 +1108,8 @@ static struct mdio_device_id __maybe_unu
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR114C) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR114C) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR813) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR813) },

View file

@ -0,0 +1,368 @@
From c6a1759365fc35463138a7d9e335ee53f384b8df Mon Sep 17 00:00:00 2001
From: Daniel Golle <daniel@makrotopia.org>
Date: Fri, 10 May 2024 02:53:52 +0100
Subject: [PATCH] net: phy: aquantia: add support for PHY LEDs
Aquantia Ethernet PHYs got 3 LED output pins which are typically used
to indicate link status and activity.
Add a minimal LED controller driver supporting the most common uses
with the 'netdev' trigger as well as software-driven forced control of
the LEDs.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
drivers/net/phy/aquantia/Makefile | 3 +
drivers/net/phy/aquantia/aquantia.h | 84 +++++++++++++
drivers/net/phy/aquantia/aquantia_leds.c | 152 +++++++++++++++++++++++
drivers/net/phy/aquantia/aquantia_main.c | 127 +++++++++++++------
4 files changed, 329 insertions(+), 37 deletions(-)
create mode 100644 drivers/net/phy/aquantia/aquantia_leds.c
--- a/drivers/net/phy/aquantia/Makefile
+++ b/drivers/net/phy/aquantia/Makefile
@@ -3,4 +3,7 @@ aquantia-objs += aquantia_main.o aquan
ifdef CONFIG_HWMON
aquantia-objs += aquantia_hwmon.o
endif
+ifdef CONFIG_PHYLIB_LEDS
+aquantia-objs += aquantia_leds.o
+endif
obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o
--- a/drivers/net/phy/aquantia/aquantia.h
+++ b/drivers/net/phy/aquantia/aquantia.h
@@ -62,6 +62,26 @@
#define VEND1_THERMAL_PROV_LOW_TEMP_FAIL 0xc422
#define VEND1_THERMAL_PROV_HIGH_TEMP_WARN 0xc423
#define VEND1_THERMAL_PROV_LOW_TEMP_WARN 0xc424
+
+#define AQR_NUM_LEDS 3
+
+#define VEND1_GLOBAL_LED_PROV 0xc430
+#define AQR_LED_PROV(x) (VEND1_GLOBAL_LED_PROV + x)
+#define VEND1_GLOBAL_LED_PROV_ACT_STRETCH GENMASK(0, 1)
+#define VEND1_GLOBAL_LED_PROV_TX_ACT BIT(2)
+#define VEND1_GLOBAL_LED_PROV_RX_ACT BIT(3)
+#define VEND1_GLOBAL_LED_PROV_LINK_MASK (GENMASK(15, 14) | GENMASK(8, 5))
+#define VEND1_GLOBAL_LED_PROV_LINK100 BIT(5)
+#define VEND1_GLOBAL_LED_PROV_LINK1000 BIT(6)
+#define VEND1_GLOBAL_LED_PROV_LINK10000 BIT(7)
+#define VEND1_GLOBAL_LED_PROV_FORCE_ON BIT(8)
+#define VEND1_GLOBAL_LED_PROV_LINK2500 BIT(14)
+#define VEND1_GLOBAL_LED_PROV_LINK5000 BIT(15)
+
+#define VEND1_GLOBAL_LED_DRIVE 0xc438
+#define VEND1_GLOBAL_LED_DRIVE_VDD BIT(1)
+#define AQR_LED_DRIVE(x) (VEND1_GLOBAL_LED_DRIVE + x)
+
#define VEND1_THERMAL_STAT1 0xc820
#define VEND1_THERMAL_STAT2 0xc821
#define VEND1_THERMAL_STAT2_VALID BIT(0)
@@ -115,3 +135,23 @@ static inline int aqr_hwmon_probe(struct
#endif
int aqr_firmware_load(struct phy_device *phydev);
+
+#if IS_ENABLED(CONFIG_PHYLIB_LEDS)
+int aqr_phy_led_blink_set(struct phy_device *phydev, u8 index,
+ unsigned long *delay_on,
+ unsigned long *delay_off);
+
+int aqr_phy_led_brightness_set(struct phy_device *phydev,
+ u8 index, enum led_brightness value);
+
+int aqr_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
+ unsigned long rules);
+
+int aqr_phy_led_hw_control_get(struct phy_device *phydev, u8 index,
+ unsigned long *rules);
+
+int aqr_phy_led_hw_control_set(struct phy_device *phydev, u8 index,
+ unsigned long rules);
+
+int aqr_phy_led_polarity_set(struct phy_device *phydev, int index, unsigned long modes);
+#endif
--- /dev/null
+++ b/drivers/net/phy/aquantia/aquantia_leds.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0
+/* LED driver for Aquantia PHY
+ *
+ * Author: Daniel Golle <daniel@makrotopia.org>
+ */
+
+#include <linux/phy.h>
+
+#include "aquantia.h"
+
+int aqr_phy_led_brightness_set(struct phy_device *phydev,
+ u8 index, enum led_brightness value)
+{
+ if (index > 2)
+ return -EINVAL;
+
+ return phy_modify_mmd(phydev, MDIO_MMD_VEND1, AQR_LED_PROV(index), VEND1_GLOBAL_LED_PROV_LINK_MASK |
+ VEND1_GLOBAL_LED_PROV_FORCE_ON |
+ VEND1_GLOBAL_LED_PROV_RX_ACT |
+ VEND1_GLOBAL_LED_PROV_TX_ACT,
+ value ? VEND1_GLOBAL_LED_PROV_FORCE_ON : 0);
+}
+
+static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_LINK) |
+ BIT(TRIGGER_NETDEV_LINK_100) |
+ BIT(TRIGGER_NETDEV_LINK_1000) |
+ BIT(TRIGGER_NETDEV_LINK_2500) |
+ BIT(TRIGGER_NETDEV_LINK_5000) |
+ BIT(TRIGGER_NETDEV_LINK_10000) |
+ BIT(TRIGGER_NETDEV_RX) |
+ BIT(TRIGGER_NETDEV_TX));
+
+int aqr_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
+ unsigned long rules)
+{
+ if (index >= AQR_NUM_LEDS)
+ return -EINVAL;
+
+ /* All combinations of the supported triggers are allowed */
+ if (rules & ~supported_triggers)
+ return -EOPNOTSUPP;
+
+ return 0;
+}
+
+int aqr_phy_led_hw_control_get(struct phy_device *phydev, u8 index,
+ unsigned long *rules)
+{
+ int val;
+
+ if (index >= AQR_NUM_LEDS)
+ return -EINVAL;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_VEND1, AQR_LED_PROV(index));
+ if (val < 0)
+ return val;
+
+ *rules = 0;
+ if (val & VEND1_GLOBAL_LED_PROV_LINK100)
+ *rules |= BIT(TRIGGER_NETDEV_LINK_100);
+
+ if (val & VEND1_GLOBAL_LED_PROV_LINK1000)
+ *rules |= BIT(TRIGGER_NETDEV_LINK_1000);
+
+ if (val & VEND1_GLOBAL_LED_PROV_LINK2500)
+ *rules |= BIT(TRIGGER_NETDEV_LINK_2500);
+
+ if (val & VEND1_GLOBAL_LED_PROV_LINK5000)
+ *rules |= BIT(TRIGGER_NETDEV_LINK_5000);
+
+ if (val & VEND1_GLOBAL_LED_PROV_LINK10000)
+ *rules |= BIT(TRIGGER_NETDEV_LINK_10000);
+
+ if (val & VEND1_GLOBAL_LED_PROV_RX_ACT)
+ *rules |= BIT(TRIGGER_NETDEV_RX);
+
+ if (val & VEND1_GLOBAL_LED_PROV_TX_ACT)
+ *rules |= BIT(TRIGGER_NETDEV_TX);
+
+ return 0;
+}
+
+int aqr_phy_led_hw_control_set(struct phy_device *phydev, u8 index,
+ unsigned long rules)
+{
+ u16 val = 0;
+
+ if (index >= AQR_NUM_LEDS)
+ return -EINVAL;
+
+ if (rules & (BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK)))
+ val |= VEND1_GLOBAL_LED_PROV_LINK100;
+
+ if (rules & (BIT(TRIGGER_NETDEV_LINK_1000) | BIT(TRIGGER_NETDEV_LINK)))
+ val |= VEND1_GLOBAL_LED_PROV_LINK1000;
+
+ if (rules & (BIT(TRIGGER_NETDEV_LINK_2500) | BIT(TRIGGER_NETDEV_LINK)))
+ val |= VEND1_GLOBAL_LED_PROV_LINK2500;
+
+ if (rules & (BIT(TRIGGER_NETDEV_LINK_5000) | BIT(TRIGGER_NETDEV_LINK)))
+ val |= VEND1_GLOBAL_LED_PROV_LINK5000;
+
+ if (rules & (BIT(TRIGGER_NETDEV_LINK_10000) | BIT(TRIGGER_NETDEV_LINK)))
+ val |= VEND1_GLOBAL_LED_PROV_LINK10000;
+
+ if (rules & BIT(TRIGGER_NETDEV_RX))
+ val |= VEND1_GLOBAL_LED_PROV_RX_ACT;
+
+ if (rules & BIT(TRIGGER_NETDEV_TX))
+ val |= VEND1_GLOBAL_LED_PROV_TX_ACT;
+
+ return phy_modify_mmd(phydev, MDIO_MMD_VEND1, AQR_LED_PROV(index),
+ VEND1_GLOBAL_LED_PROV_LINK_MASK |
+ VEND1_GLOBAL_LED_PROV_FORCE_ON |
+ VEND1_GLOBAL_LED_PROV_RX_ACT |
+ VEND1_GLOBAL_LED_PROV_TX_ACT, val);
+}
+
+int aqr_phy_led_polarity_set(struct phy_device *phydev, int index, unsigned long modes)
+{
+ bool active_low = false;
+ u32 mode;
+
+ if (index >= AQR_NUM_LEDS)
+ return -EINVAL;
+
+ for_each_set_bit(mode, &modes, __PHY_LED_MODES_NUM) {
+ switch (mode) {
+ case PHY_LED_ACTIVE_LOW:
+ active_low = true;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ return phy_modify_mmd(phydev, MDIO_MMD_VEND1, AQR_LED_DRIVE(index),
+ VEND1_GLOBAL_LED_DRIVE_VDD,
+ active_low ? VEND1_GLOBAL_LED_DRIVE_VDD : 0);
+}
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -740,6 +740,13 @@ static struct phy_driver aqr_driver[] =
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+#if IS_ENABLED(CONFIG_PHYLIB_LEDS)
+ .led_brightness_set = aqr_phy_led_brightness_set,
+ .led_hw_is_supported = aqr_phy_led_hw_is_supported,
+ .led_hw_control_set = aqr_phy_led_hw_control_set,
+ .led_hw_control_get = aqr_phy_led_hw_control_get,
+ .led_polarity_set = aqr_phy_led_polarity_set,
+#endif
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQCS109),
@@ -759,6 +766,13 @@ static struct phy_driver aqr_driver[] =
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+#if IS_ENABLED(CONFIG_PHYLIB_LEDS)
+ .led_brightness_set = aqr_phy_led_brightness_set,
+ .led_hw_is_supported = aqr_phy_led_hw_is_supported,
+ .led_hw_control_set = aqr_phy_led_hw_control_set,
+ .led_hw_control_get = aqr_phy_led_hw_control_get,
+ .led_polarity_set = aqr_phy_led_polarity_set,
+#endif
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR111),
@@ -778,6 +792,13 @@ static struct phy_driver aqr_driver[] =
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+#if IS_ENABLED(CONFIG_PHYLIB_LEDS)
+ .led_brightness_set = aqr_phy_led_brightness_set,
+ .led_hw_is_supported = aqr_phy_led_hw_is_supported,
+ .led_hw_control_set = aqr_phy_led_hw_control_set,
+ .led_hw_control_get = aqr_phy_led_hw_control_get,
+ .led_polarity_set = aqr_phy_led_polarity_set,
+#endif
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR111B0),
@@ -797,6 +818,13 @@ static struct phy_driver aqr_driver[] =
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+#if IS_ENABLED(CONFIG_PHYLIB_LEDS)
+ .led_brightness_set = aqr_phy_led_brightness_set,
+ .led_hw_is_supported = aqr_phy_led_hw_is_supported,
+ .led_hw_control_set = aqr_phy_led_hw_control_set,
+ .led_hw_control_get = aqr_phy_led_hw_control_get,
+ .led_polarity_set = aqr_phy_led_polarity_set,
+#endif
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR405),
@@ -823,6 +851,13 @@ static struct phy_driver aqr_driver[] =
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+#if IS_ENABLED(CONFIG_PHYLIB_LEDS)
+ .led_brightness_set = aqr_phy_led_brightness_set,
+ .led_hw_is_supported = aqr_phy_led_hw_is_supported,
+ .led_hw_control_set = aqr_phy_led_hw_control_set,
+ .led_hw_control_get = aqr_phy_led_hw_control_get,
+ .led_polarity_set = aqr_phy_led_polarity_set,
+#endif
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR412),
@@ -841,6 +876,13 @@ static struct phy_driver aqr_driver[] =
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+#if IS_ENABLED(CONFIG_PHYLIB_LEDS)
+ .led_brightness_set = aqr_phy_led_brightness_set,
+ .led_hw_is_supported = aqr_phy_led_hw_is_supported,
+ .led_hw_control_set = aqr_phy_led_hw_control_set,
+ .led_hw_control_get = aqr_phy_led_hw_control_get,
+ .led_polarity_set = aqr_phy_led_polarity_set,
+#endif
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR113),
@@ -860,6 +902,13 @@ static struct phy_driver aqr_driver[] =
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+#if IS_ENABLED(CONFIG_PHYLIB_LEDS)
+ .led_brightness_set = aqr_phy_led_brightness_set,
+ .led_hw_is_supported = aqr_phy_led_hw_is_supported,
+ .led_hw_control_set = aqr_phy_led_hw_control_set,
+ .led_hw_control_get = aqr_phy_led_hw_control_get,
+ .led_polarity_set = aqr_phy_led_polarity_set,
+#endif
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR113C),
@@ -879,6 +928,13 @@ static struct phy_driver aqr_driver[] =
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+#if IS_ENABLED(CONFIG_PHYLIB_LEDS)
+ .led_brightness_set = aqr_phy_led_brightness_set,
+ .led_hw_is_supported = aqr_phy_led_hw_is_supported,
+ .led_hw_control_set = aqr_phy_led_hw_control_set,
+ .led_hw_control_get = aqr_phy_led_hw_control_get,
+ .led_polarity_set = aqr_phy_led_polarity_set,
+#endif
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR114C),
@@ -898,6 +954,13 @@ static struct phy_driver aqr_driver[] =
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+#if IS_ENABLED(CONFIG_PHYLIB_LEDS)
+ .led_brightness_set = aqr_phy_led_brightness_set,
+ .led_hw_is_supported = aqr_phy_led_hw_is_supported,
+ .led_hw_control_set = aqr_phy_led_hw_control_set,
+ .led_hw_control_get = aqr_phy_led_hw_control_get,
+ .led_polarity_set = aqr_phy_led_polarity_set,
+#endif
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR813),
@@ -917,6 +980,13 @@ static struct phy_driver aqr_driver[] =
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+#if IS_ENABLED(CONFIG_PHYLIB_LEDS)
+ .led_brightness_set = aqr_phy_led_brightness_set,
+ .led_hw_is_supported = aqr_phy_led_hw_is_supported,
+ .led_hw_control_set = aqr_phy_led_hw_control_set,
+ .led_hw_control_get = aqr_phy_led_hw_control_get,
+ .led_polarity_set = aqr_phy_led_polarity_set,
+#endif
},
};

View file

@ -0,0 +1,100 @@
From 6e6fff51ae5e54092611d174fa45fa78c237a415 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Tue, 21 May 2024 20:01:46 +0200
Subject: [PATCH] net: phy: move LED polarity to phy_init_hw
Some PHY reset the polarity on reset and this cause the LED to
malfunction as LED polarity is configured only when LED is
registered.
To better handle this, move the LED polarity configuration in
phy_init_hw to reconfigure it after PHY reset.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
drivers/net/phy/phy_device.c | 53 +++++++++++++++++++++++++-----------
1 file changed, 37 insertions(+), 16 deletions(-)
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1223,6 +1223,37 @@ static int phy_poll_reset(struct phy_dev
return 0;
}
+static int of_phy_led_init(struct phy_device *phydev)
+{
+ struct phy_led *phyled;
+
+ list_for_each_entry(phyled, &phydev->leds, list) {
+ struct led_classdev *cdev = &phyled->led_cdev;
+ struct device_node *np = cdev->dev->of_node;
+ unsigned long modes = 0;
+ int err;
+
+ if (of_property_read_bool(np, "active-low"))
+ set_bit(PHY_LED_ACTIVE_LOW, &modes);
+ if (of_property_read_bool(np, "inactive-high-impedance"))
+ set_bit(PHY_LED_INACTIVE_HIGH_IMPEDANCE, &modes);
+
+ if (!modes)
+ continue;
+
+ /* Return error if asked to set polarity modes but not supported */
+ if (!phydev->drv->led_polarity_set)
+ return -EINVAL;
+
+ err = phydev->drv->led_polarity_set(phydev, phyled->index,
+ modes);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
int phy_init_hw(struct phy_device *phydev)
{
int ret = 0;
@@ -1259,6 +1290,12 @@ int phy_init_hw(struct phy_device *phyde
return ret;
}
+ if (IS_ENABLED(CONFIG_PHYLIB_LEDS)) {
+ ret = of_phy_led_init(phydev);
+ if (ret < 0)
+ return ret;
+ }
+
return 0;
}
EXPORT_SYMBOL(phy_init_hw);
@@ -3204,7 +3241,6 @@ static int of_phy_led(struct phy_device
struct device *dev = &phydev->mdio.dev;
struct led_init_data init_data = {};
struct led_classdev *cdev;
- unsigned long modes = 0;
struct phy_led *phyled;
u32 index;
int err;
@@ -3222,21 +3258,6 @@ static int of_phy_led(struct phy_device
if (index > U8_MAX)
return -EINVAL;
- if (of_property_read_bool(led, "active-low"))
- set_bit(PHY_LED_ACTIVE_LOW, &modes);
- if (of_property_read_bool(led, "inactive-high-impedance"))
- set_bit(PHY_LED_INACTIVE_HIGH_IMPEDANCE, &modes);
-
- if (modes) {
- /* Return error if asked to set polarity modes but not supported */
- if (!phydev->drv->led_polarity_set)
- return -EINVAL;
-
- err = phydev->drv->led_polarity_set(phydev, index, modes);
- if (err)
- return err;
- }
-
phyled->index = index;
if (phydev->drv->led_brightness_set)
cdev->brightness_set_blocking = phy_led_set_brightness;